Related Research Articles
Metallurgy is a domain of materials science and engineering that studies the physical and chemical behavior of metallic elements, their inter-metallic compounds, and their mixtures, which are known as alloys. Metallurgy encompasses both the science and the technology of metals; that is, the way in which science is applied to the production of metals, and the engineering of metal components used in products for both consumers and manufacturers. Metallurgy is distinct from the craft of metalworking. Metalworking relies on metallurgy in a similar manner to how medicine relies on medical science for technical advancement. A specialist practitioner of metallurgy is known as a metallurgist.
Pig iron, also known as crude iron, is an intermediate product of the iron industry in the production of steel which is obtained by smelting iron ore in a blast furnace. Pig iron has a very high carbon content, typically 3.8–4.7%, along with silica and other constituents of dross, which makes it very brittle and not useful directly as a material except for limited applications.
A blast furnace is a type of metallurgical furnace used for smelting to produce industrial metals, generally pig iron, but also others such as lead or copper. Blast refers to the combustion air being "forced" or supplied above atmospheric pressure.
Cyril Stanley Smith was a British metallurgist and historian of science. He is most famous for his work on the Manhattan Project where he was responsible for the production of fissionable metals. A graduate of the University of Birmingham and Massachusetts Institute of Technology (MIT), Smith worked for many years as a research metallurgist at the American Brass Company. During World War II he worked in the Chemical-Metallurgical Division of the Los Alamos Laboratory, where he purified, cast and shaped uranium-235 and plutonium, a metal hitherto available only in microgram amounts, and whose properties were largely unknown. After the war he served on the Atomic Energy Commission's influential General Advisory Committee, and the President's Science Advisory Committee.
Lost-wax casting is the process by which a duplicate metal sculpture is cast from an original sculpture. Intricate works can be achieved by this method.
The American Institute of Mining, Metallurgical, and Petroleum Engineers (AIME) is a professional association for mining and metallurgy, with over 145,000 members. It was founded in 1871 by 22 mining engineers in Wilkes-Barre, Pennsylvania, United States, being one of the first national engineering societies in the country. Its charter is to "advance and disseminate, through the programs of the Member Societies, knowledge of engineering and the arts and sciences involved in the production and use of minerals, metals, energy sources and materials for the benefit of humankind."
The Minerals, Metals & Materials Society (TMS) is a professional organization for materials scientists and engineers that encompasses the entire range of materials and engineering, from minerals processing and primary metals production to basic research and the advanced applications of materials.
The Institute of Cast Metals Engineers (ICME), originally the British Foundrymen's Association is a British professional engineering institution founded in 1904. It publishes the Foundry Trade Journal, which was established in 1902.
Pradeep K. Rohatgi is a professor of materials engineering, and director of the Center for Composites at the University of Wisconsin–Milwaukee. He is a world leader in the field of composite materials, particularly metal matrix composites.
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process. Casting materials are usually metals or various time setting materials that cure after mixing two or more components together; examples are epoxy, concrete, plaster and clay. Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods. Heavy equipment like machine tool beds, ships' propellers, etc. can be cast easily in the required size, rather than fabricating by joining several small pieces.
Patcha Ramachandra Rao was a metallurgist and administrator. He has the unique distinction of being the only Vice-Chancellor (2002–05) of the Banaras Hindu University (BHU) who was also a student (1963–68) and faculty (1964–92) at that institution. From 1992 to 2002, Rao was the Director of the National Metallurgical Laboratory, Jamshedpur. After his tenure as Vice-Chancellor of B.H.U., in 2005, he took the reins of the Defence Institute of Advanced Technology (DIAT) as its first Vice-Chancellor. He was to serve DIAT until his superannuation in 2007. From 2007 till the end, Rao was a Raja Ramanna Fellow at the International Advanced Research Centre for Powder Metallurgy and New Materials, in Hyderabad, Andhra Pradesh.
Thomas Turner Sc., A.R.S.M., F.R.I.C. was the first Professor of Metallurgy in Britain, at the University of Birmingham. The University was created in 1900 and the department founded in 1902. He was instrumental in the early development of the sclerometer for testing hardness of metals. He retired in 1926. He was also a leading member of the Christadelphian church.
(Ivor) Rex Harris FREng FIMMM FInstP was a British academic.
Prafulla Kumar Jena is an Indian metallurgist and a former director of the National Institute for Interdisciplinary Science and Technology of the Council for Scientific and Industrial Research, Bhubaneshwar. He previously held the TATA Chair for the Distinguished Professorof Metallurgical Engineering at the Indian Institute of Technology, Kharagpur. The Government of India honored him with a Padma Shri in 1977.
Mark F. Horstemeyer is the Dean of the School of Engineering at Liberty University. He was the Giles Distinguished Professor at Mississippi State University (MSU) and professor in the Mechanical Engineering Department at Mississippi State University (2002–2018), holding a Chair position for the Center for Advanced Vehicular Systems (CAVS) in Computational Solid Mechanics; he was also the Chief Technical Officer for CAVS. Before coming to MSU, he worked for Sandia National Laboratories for fifteen years (1987-2002) in the area of multiscale modeling for design.
Bhakta B. Rath is an Indian American material physicist and Head of the Materials Science and Component Technology of the United States Naval Research Laboratory (NRL), the corporate research laboratory for the United States Navy and the United States Marine Corps. He is the chief administrative officer for program planning, interdisciplinary coordination, supervision and control of research and is the associate director of research for Materials Science and Component Technology at NRL.
Boris Nikolaevich Poliakov is a Russian scientist, professor of Mechanical Engineering, and member of the Academy of Engineering Sciences of the Russian Federation.
Dan J. Thoma is an American metallurgist who is a Professor in the Department of Materials Science and Engineering at the University of Wisconsin–Madison. He is the director of the Grainger Institute for Engineering at the University of Wisconsin–Madison. Thoma is also a past President of the American Institute of Mining, Metallurgical, and Petroleum Engineers (AIME). Thoma is well-known for his research on 3D printing technology, which he has carried out for over two decades.
Georges John Kipouros is a Greek Canadian materials engineer, university professor, and former dean of the University of Saskatchewan College of Engineering. He presently serves as adjunct professor at the Faculty of Engineering of both Dalhousie University and University of Waterloo. He is the winner of the 20th Canadian Metal Chemistry Award, and is known as an ambassador for the engineering profession in Canada. At Dalhousie University he served as the vice chair of the Senate, assistant dean of the Faculty of Engineering, director of the Minerals Engineering Centre and head of the Mining and Metallurgical Engineering Department. He is known for his contributions to the processing of aluminum, magnesium, rare earth metals and molten salts, as well as the analysis of corrosion in additive manufacturing. In addition he is known as a major expert in powder metallurgy. He is the inventor of a technique for measuring metal corrosion in active pipelines, allowing for early detection of problem areas. At General Motors, he integrated the recovery and recycling of reactants into the production of neodymium from its oxide, rendering the process more cost-effective. He also led the technology transfer from laboratory research to plant production.
Somnath Ghosh is the Michael G. Callas Chair Professor in the Department of Civil & Systems Engineering and a Professor of Mechanical Engineering and Materials Science & Engineering at Johns Hopkins University (JHU). He is the founding director of the JHU Center for Integrated Structure-Materials Modeling and Simulation (CISMMS) and was the director of an Air Force Center of Excellence in Integrated Materials Modeling (CEIMM). Prior to his appointment at JHU, Ghosh was the John B. Nordholt Professor of Mechanical Engineering and Materials Science & Engineering at Ohio State University. He is a fellow of several professional societies, including the American Association for the Advancement of Science (AAAS).
References
- ↑ Jade Davenport. "CME Foundry". Engineeringnews.co.za. Retrieved 14 August 2011.
- ↑ Center of Excellence for Advanced Materials and Processings, Iran University of Science and Technology. Retrieved August 2011
- 1 2 "Metallurgical and Materials Transactions B, Volume 37, Number 6". Metallurgical and Materials Transactions B. SpringerLink. 37: 855. doi:10.1007/BF02735005. S2CID 137338522.
- ↑ "Chairs". Times Higher Education. 20 March 1998. Retrieved 14 August 2011.
- ↑ "Institute of Cast Metals Engineers | ICME Awards". Icme.org.uk. Retrieved 14 August 2011.
