Related Research Articles
Type 72 Non-Metallic is a Chinese circular, plastic bodied landmine which is designed to damage or destroy a vehicle by blast effect.
The PMN series of blast anti-personnel mines were designed and manufactured in the Soviet Union. They are one of the most widely used and commonly found devices during demining operations. They are sometimes nicknamed "black widow" because of their dark casings.
The VS-1.6 is an Italian circular plastic-cased scatterable anti-tank blast mine. It has very few metal components and is resistant to overpressure and shock. The mine can also be deployed conventionally and from helicopters. It was produced by Valsella Meccanotecnica, but production has ceased.
The VS-50 is a circular plastic cased anti-personnel blast mine, formerly manufactured by the now-defunct Valsella Meccanotecnica SpA, an Italian high-tech defence industry specialized in area denial systems which was also the manufacturer of the Valmara 69 and one of the first industries in the world to implement plastic construction for landmines. The design is similar to the TS-50 and VS-MK2 mine. It is blast resistant and can be used in a minimum metal configuration. Though unlikely to kill, the explosive charge contained within a VS-50 is quite sufficient to destroy the victim's foot: the blast is capable of penetrating 5 mm of mild steel leaving an 80 mm-diameter hole.
The SB-81 is an Italian plastic cased minimum metal anti-tank blast mine dating from the early 1980s. The mine uses an air pressure based fuze, which gives it protection against overpressure and blast. It can therefore be regarded as a blast resistant mine. The mine can be scattered by hand or by mine laying systems.
The Type 72 is a Chinese metal-cased circular anti-tank blast mine, it is similar to the Russian TM-46 mine, a plastic cased version of the mine is also produced, the Type 72 non-metallic anti-tank mine. The mine has a central plastic cased blast resistant fuze.
The TMA-4 is a circular plastic cased Yugoslavian minimum metal anti-tank blast mine. It is a modernized version of the TMA-3. The mine is basically a cast block of TNT with three fuze wells cut into it, encased in plastic. Three black plastic UTMA-4 fuzes are installed into the top surface of the mine. A thin rope carry handle is also provided. The small pressure plate area of the fuzes make the mine resistant to overpressure from explosive demining techniques. Additionally the low metal content of the mine make it very difficult to detect. Although no secondary fuze well is provided, it is possible that the mine could be fitted with improvised anti-handling devices.
The YM-III or YM-3 is a circular ABS plastic cased Iranian minimum metal anti-tank blast mine. It is a copy of the Chinese Type 72 non-metallic anti-tank mine. The mine uses a blast-resistant fuze, which relies on gradual application of pressure to trigger it. The mine is found in Afghanistan, Bosnia, Iran, and Iraq.
The VS-AT4 and VS-AT4-EL are Italian minimum metal blast resistant anti-tank blast mines. The VS-AT4 uses a blast-resistant mechanical pressure fuze, while the VS-AT4-EL uses a programmable electronic pressure fuze with an integral anti-lifting function.
The TC/2.4 is a circular plastic cased Italian minimum metal anti-tank blast mine. The mine uses a blast and shock resistant pneumatic fuze. It could be laid by hand or mechanically, and could be fitted with anti-handling devices. An Egyptian copy of the mine is produced, designated as the M/80. The mine was used in Iraq, but is no longer produced.
The T-AB-1 is a rectangular plastic cased Brazilian anti-tank blast mine. The mine uses a T-AB-1 anti-personnel mine as a fuze. The AP mine is inserted into the body of the AT mine under a large stiff ABS plastic pressure plate. The pressure plate is fastened in place by a number of shear pins, which are designed to give way under a pressure of 200 kg. The AP mine under the pressure plate is then triggered, triggering the mine's main charge.
The PTM-80P is a circular plastic bodied Bulgarian minimum metal anti-tank blast mine, similar in design to the Russian TM-62P2. The mine can accept any fuze that fits into the TM-62 series of mines, including various mechanical, blast resistant, electronic, and magnetic influence fuzes. The mine is completely waterproof and can be laid in shallow water. It is currently in service with the Bulgarian armed forces.
The MAT/5 is an Italian circular, plastic-cased minimum metal blast resistant anti-tank blast mine. It uses a pneumatic fuze which is resistant to shock and blast, and is also claimed to be resistant to mine flails and mine rollers. The mine's plastic case is waterproof, and it can be laid in shallow water. Additionally the mine will function upside down. The mine can be fitted with anti-handling devices. The mine is no longer in production.
The MATS/1.4 is a scatterable Italian circular, plastic-cased minimum metal blast-resistant anti-tank blast mine. It uses a pneumatic fuze which is resistant to shock and blast. The mine's plastic case is waterproof, and the mine can be scattered from a helicopter travelling at up to 200 km/h. The mine is normally tan-colored. The mine's main charge is relatively small, so when hand-emplaced the mine can be stacked, to increase its effect.
The MATS/2 is a scatterable Italian circular, plastic-cased minimum metal blast resistant anti-tank blast mine. It uses a pneumatic fuse which is resistant to shock and blast similar to the fuse fitted to the TS-50. The mine's plastic case is waterproof, and the mine can be scattered from a helicopter traveling at up to 200 km/h using the Tecnovar DAT dispensing system. A secondary fuse well is provided in the base for the fitting of anti-handling devices.
The MATS/2.6 is a scatterable Italian circular, plastic-cased minimum metal blast resistant anti-tank blast mine. It is very similar to the MATS/2, except that it uses a smooth pressure plate rather than a griddle pressure plate. It uses a pneumatic fuse which is resistant to shock and blast similar to the fuze fitted to the TS-50. The mine's plastic case is waterproof, and the mine can be scattered from a helicopter.
The MAT.84-F5 is a Chilean, plastic cased, minimum metal anti-tank blast mine. The mine has a small central pressure plate on the top of the case which is made from 3 mm thick, olive green, high-impact plastic. The mine is armed before it is laid by unscrewing a safety plug from the side of the mine. The mine is believed to be in service with the Chilean armed services.
The MI AC PR are a series of French minimum metal blast resistant mine anti-tank blast mines. The mines can be laid by hand or automatically from the Matenin mine laying system at a rate of gdnbekbd500 per hour. The mines use a clockwork arming delay, which can also self neutralize the mine after a set period. They have a secondary fuze well in the base that allows anti-handling devices to be fitted.
The FFV 028 is a series of steel cased Swedish anti-tank mines that use electronic fuzes. The mines are circular, with a large Misznay Schardin effect warhead in the center of the mine, with the fuzing and sensor electronics located in the dead space above the main charge. The design of the mine dates from the 1970s and uses a magnetic influence sensor to detonate the mine, making it able to attack the full width of armoured vehicles.
The Mahindra Mine Protected Vehicle-I (MPV-I), is an Indian MRAP-type armored personnel carrier manufactured by Defense Land Systems, a joint-venture of Mahindra & Mahindra Limited and BAE Systems, the first vehicle made under the venture. It is an improved Casspir variant built under licence.
References
- Janes Mines and Mine Clearance 2005-2006
- MAT/6 mine at ORDATA