Mack MC/MR series

Last updated
Mack MC/MR series
NYPD ESU 9 truck 5509.jpg
Overview
Manufacturer Mack Trucks
Also calledMack Cruise-Hauler
Body and chassis
Class Truck
Body style Truck (cab over engine)
Powertrain
Engine 11.0 litre Maxidyne twin-turbo diesel
Transmission 5-7 speed Maxitorque (manual)
Chronology
Successor Mack TerraPro

The Mack MC/MR series, also known as the "Cruise-Hauler", is a cabover truck first introduced in 1978. [1] It is of a distinct "set back front axle" design (first seen on the Mack FM), with the driver compartment mounted ahead of the front axle and with a large, flat, divided windscreen covering almost half of the truck's frontal aspect.

Contents

The MC was used for custom-built fire equipment, when Mack exited the market in 1990 they discontinued the MC. The MR was widely used in refuse applications and continued in production until up-graded as the MRU TerraPro in 2007.

Design

The MC/MR was designed from the beginning to be available in right-hand drive as well as left-hand drive. [1] This allowed Mack to market the truck in the United Kingdom without costly conversions, and also opened the trash truck market at home. The right-hand drive models also have the exhaust relocated to the left, while the turbocharger is mounted behind the engine so as to provide more space and less heat soak. [1] Export models are coded MCE and MRE respectively. The low profile cab is of steel, while the doors are fibreglass. The engine intrudes considerably into the low cab. The cab tilts through a full 90 degrees, allowing for the radiator to be removed without first removing the cab. [2] The dashboard is lit from a single source through fibreoptics, this being a very early example of such an application. [2]

Engines

The MC was available with Mack E6 series and mid-range Caterpillar 3208 series diesel engines. The MR was available with the E6 series and E7 series diesel engines.

Maxidyne high-torque engines have a wide power band and can develop maximum power below the governed speed they are rated at. This allows less shifting and smoother power "on the ground" when accelerating. Most MR series had Maxidyne engines.

The Mack E6 was a 672 cubic inches (11.0 L) turbocharged inline six-cylinder engine. it developed 200 to 350 horsepower (150 to 260 kW).

The Mack E7 was a 728 cubic inches (11.9 L) turbocharged inline six-cylinder engine. It 1998 it developed 300 to 370 horsepower (220 to 280 kW) and 120 to 1,480 pound force-feet (160 to 2,010 N⋅m) of torque.

The Caterpillar 3208 was a 636 cubic inches (10.4 L) V8 engine. It developed 175 to 210 horsepower (130 to 157 kW) and 400 to 485 pound force-feet (542 to 658 N⋅m) of torque.

Transmissions

Mack, Allison, Fuller, and Spicer transmissions have been available, evolving over time. Each was suited for different applications.

All manual transmission except the 6-speed had a 5-speed transmission, additional speeds were made with combinations of ranges. The lowest transmission gear can be either an on-road or very low off-road ratio.

Mack Maxitorque transmissions are designed to work with Maxidyne engines and have fewer and wider-spaced gears than more conventional models. They originally had 5 speeds and developed into 8 speeds with low range gears. Other Mack manual transmissions have 5-10 speeds.

Allison automatic transmissions are widely used on refuse trucks. Early models had 4 or 5 speeds and evolved with 5 or 6 speeds. They are fully automatic planetary gear transmissions and later models have lock-up torque converters.

Fuller Roadranger transmissions are multi-range and suited for non-Maxidyne engines, which need more speeds. They had 10 highway speeds and an optional low range.

Spicer 5-speed transmissions were available in 400 series trucks.

Transfer cases are used on concrete pumps. They direct full transmission output to either the drive-line or the pump, but not both at the same time.

Axles and suspensions

Front axles were rated at 10,500 or 12,000 pounds (4,800 or 5,400 kg) in light MC models but most models had between 12,000 to 20,000 pounds (5,400 to 9,100 kg). Steering could have up to a 45 cut, allowing very tight turning radius.

Single rear axles rated at 18,500 pounds (8,400 kg) were used in small MC models, but most were 23,000 pounds (10,000 kg) and later MR models could be up to 30,000 pounds (14,000 kg).

The Camelback tandem is the base rear suspension. The Camelback has multiple leaves that rock above the bogey pivot then curve down and under the axles. It is strong in on/off-road service. It is available in ratings of 38,000, 44,000, 52,000, and 65,000 pounds (17,000, 20,000, 24,000, and 29,000 kg).

Walking beams have low bogie pivots with a balance beam going out and under the axles. Any suspension is above the bogey pivot. They can have leaf springs or be solidly mounted. Walking beams are very stable at low speeds and when stopped.

Applications

Refuse

Front loaders drive directly up to a container. A boom goes from the body over and then down in front of, the cab. As the truck moves forward slowly two forks pick up the container. The container is then lifted up and over the cab to be dumped into a hopper on the top of the body. Front loaders are used for commercial pickup.

Rear loaders have a large hopper on the rear end. Typically a rear crew can load loose material, bins with assist, oversize pieces, and small containers. They are used for residential and light commercial pickup in congested cities.

Roll-off container trucks have a container that is raised in the front and slides off the back of the truck onto the ground. When a loaded box is carried it can be unloaded like a dump truck. They commonly haul construction debris but refuse containers are also left at commercial sites. MC/MRs are sometimes used in congested cities when extreme maneuverability is required.

Construction

Concrete pumps have a multi-stage folding boom pivoted near the center of the truck and a hopper at the rear to load the pump. The pump itself is the load and the truck always operates at maximum weight. In transit the boom is folded front to rear. In use the pump uses outriggers and the boom unfolds forward over the cab or to either side. Large pumps can have multiple extra axles.

Concrete conveyors have a telescopic conveyor belt. They do similar work to a pump but are limited and rarely as heavy as a pump.

Roll-off container trucks have a container that is raised in the front and slides off the back of the truck onto the ground. When a loaded box is carried it can be unloaded like a dump truck. They commonly haul construction debris but refuse and garbage containers are also left at commercial sites.

Snow plowing

The Metropolitan Transportation Authority in New York has snowplow models.

Fire and emergency vehicles

The MC chassis was popular for fire equipment, when it was discontinued the MR was used for emergency equipment but is not used for fire equipment.

Cargo and semi-tractors

MC models were meant primarily for cargo and semi-tractors used in congested conditions. When these markets ended the MC was discontinued while the heavier MR remained in production.

See also

Related Research Articles

<span class="mw-page-title-main">Mack Trucks</span> American truck manufacturing company

Mack Trucks, Inc., is an American truck manufacturing company and a former manufacturer of buses and trolley buses. Founded in 1900 as the Mack Brothers Company, it manufactured its first truck in 1905 and adopted its present name in 1922. Mack Trucks is a subsidiary of AB Volvo, which purchased Mack along with its then parent company Renault Véhicules Industriels in 2000.

<span class="mw-page-title-main">Ford Super Duty</span> Heavy-duty line of pickup trucks by Ford

{{Infobox automobile

<span class="mw-page-title-main">M939 series 5-ton 6×6 truck</span> 5-ton 6x6 trucks

The M939 is a 5-ton 6×6 U.S. military heavy truck. The basic cargo versions were designed to transport a 10,000 pounds (4,500 kg) cargo load over all terrain in all weather. Designed in the late 1970s to replace the M39 and M809 series of trucks, it has been in service ever since. The M939 evolved into its own family of cargo trucks, dump trucks, semi-tractors, vans, wreckers, and bare chassis/cabs for specialty bodies. 44,590 in all were produced.

<span class="mw-page-title-main">M19 Tank Transporter</span> 45-ton Truck-trailer

The M19 Tank Transporter was a heavy tank transporter system used in World War II and into the 1950s. It consisted of a 12-ton 6x4 M20 Diamond T Model 980 truck and companion 12-wheel M9 trailer.

<span class="mw-page-title-main">Diamond T</span> Defunct American motor vehicle manufacturer

The Diamond T Company was an American automobile and truck manufacturer. They produced commercial and military trucks.

<span class="mw-page-title-main">Mack F series</span> Motor vehicle

The Mack F series was the third generation of cabover trucks from Mack Trucks. Its production began in 1962 and ended in 1981. It was produced primarily as a set-forward axle truck but a setback axle version was shipped overseas. The cab came in a 50 inch day cab. Sleeper models included a 72 inch, 80 inch and later a "bustle back" was added that lengthened the sleeper to 86 inches.

<span class="mw-page-title-main">International Transtar</span> Truck range

The International TranStar, is a range of Class 8 trucks produced by Navistar International for North America. Produced nearly exclusively as a semitractor, the product range is focused towards local delivery and regional shipping.

<span class="mw-page-title-main">M39 series 5-ton 6×6 truck</span> 5-ton 6×6 truck

The M39 series 5-ton 6×6 truck (G744) was a family of heavy tactical trucks built for the United States Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg), 14 ft (4.3 m) long load over all terrain in all weather. In on-road service the load weight was doubled.

<span class="mw-page-title-main">International Loadstar</span> Motor vehicle

The International Loadstar is a series of trucks that were produced by International Harvester from 1962 to 1978. The first product line of the company developed specifically as a medium-duty truck, the Loadstar was slotted between C-Line pickup trucks and the heavy-duty R-series. Following the discontinuation of the R-series, the Loadstar was slotted below the Fleetstar and Transtar conventionals.

<span class="mw-page-title-main">M915 (truck)</span> Tractor unit used for line haul missions by the US Army

The M915 is a tractor unit used for line haul missions by the United States Army. Designed for use on improved roads it does not have a driven front axle.

<span class="mw-page-title-main">Mack Pinnacle</span>

The Mack Pinnacle is a series of heavy duty trucks produced by Mack Trucks. Introduced in 2006, the Pinnacle is the successor of the Mack Vision. Currently, the product line is sold in the United States and Canada; in Venezuela and Peru, the Pinnacle is marketed as the Mack Vision Elite.

<span class="mw-page-title-main">M123 and M125 10-ton 6x6 trucks</span> 10-ton 6x6 trucks

The Mack M123 (G792) was a 10-ton 6x6 semi-tractor introduced in 1955; the Mack M125 was a heavy cargo truck version of the M123. The M123 was used to tow tank transporter trailers while the M125 towed field artillery pieces.

<span class="mw-page-title-main">6-ton 6×6 truck</span> Type of 6-ton 6x6 truck

The 6-ton 6×6 truck was a family of heavy tactical trucks built for the United States Army during World War II. The basic cargo version was designed to transport a 6- short ton (5,400 kg) cargo load over all terrain in all weather. The chassis were built by Brockway Motor Company, The Corbitt Company, The Four Wheel Drive Auto Company (FWD), Ward LaFrance Truck Corporation, and White Motor Company. They were replaced by the M54 5-ton 6x6 trucks in the 1950s.

<span class="mw-page-title-main">5-ton 6×6 truck</span>

The 5‑ton 6x6 truck, officially "Truck, 5-ton, 4x4", was a class of heavy-duty six-wheel drive trucks used by the US Armed Forces. The basic cargo version was designed to transport a 5-ton (4,500 kg) load over all roads and cross-country terrain in all weather. Through three evolutionary series there have been component improvements, but all trucks were mechanically very similar. They were the standard heavy-duty truck of the US military for 40 years, until replaced by the Medium Tactical Vehicle (MTV) beginning in 1991.

<span class="mw-page-title-main">Diamond T 4-ton 6×6 truck</span> 4-ton (3,600 kg) 6×6 truck

The Diamond T 4-ton 6×6 truck was a heavy tactical truck built for the United States Army during World War II. Its G-number was G-509. Cargo models were designed to transport a 4-ton (3,600 kg) load over all terrain in all weather. There were also wrecker, dump, and other models. They were replaced by the M39 series 5-ton 6×6 trucks in the 1950s.

<span class="mw-page-title-main">Mack Granite</span>

The Mack Granite is a series of heavy duty and severe service trucks built by Mack Trucks. It has a long, low-profile hood and a high-visibility cab. Designed as straight trucks for local construction, waste removal, and other vocational jobs, it is also available as a semi-tractor. Introduced in 2001, it remains in production as of 2022.

<span class="mw-page-title-main">Mack TerraPro</span>

The Mack TerraPro is a series of heavy duty and severe service trucks built by Mack Trucks. They are a forward control cab-over-engine type, where the driver sits in front of the axle. A flat front has two large windshields. A spotting feature is small notches in the lower inside of the windshields. It is used in refuse service and for construction concrete pumps.

<span class="mw-page-title-main">Mack LR</span>

The Mack LR(Low Ride) is a series of heavy-duty trucks built by Mack Trucks. They are a forward control cab-over-engine type, where the driver sits in front of the axle. A flat front has two large windshields. The cab is very low-profile and has dual driving controls with a stand-up driving position on the right side. It is used in refuse service with front, side, and rear-loading refuse compactor bodies. Introduced in 2015 it remains in production in 2020.

The Mack Anthem is a series of heavy duty trucks built by Mack Trucks. It has a long low-drag hood and fenders. Introduced in 2018, it is designed primarily for highway use.

<span class="mw-page-title-main">Mack MD</span>

The Mack MD is a series of medium duty trucks to be built by Mack Trucks. It has a short, low-profile hood and a high-visibility cab. It is designed as straight trucks for local delivery, construction, and other vocational jobs. The MD was introduced in February 2020 entered full production in July 2020.

References

  1. 1 2 3 Sturgess, Steve (August 1979). "A Bulldog with Brit appeal". TRUCK. London, UK: FF Publishing Ltd: 21.
  2. 1 2 Sturgess, p. 23