Max Wedge

Last updated

The Max Wedge, formally the Maximum Performance Wedge, was an engine option produced by the Chrysler Corporation from 1962 to 1964, that was available exclusively in B Platform (intermediate) Dodges and Plymouths. The Max Wedge motor used the Chrysler RB Block, and was produced in 413 and 426 cubic-inch iterations. The 1962 Max Wedge Dodges and Plymouths, which offered a high-performance big-block engine in an intermediate-bodied vehicle, may be regarded as examples of a proto-muscle car.

Contents

History

Beginning in 1951, Chrysler's primary V8 engine was its 331 c.i. Hemi. In 1958, Chrysler introduced its new wedge-head B Block engine, which was implemented in the Dodge and DeSoto lines. The following year saw the introduction of the RB Block in Chryslers and Imperials; this was a modified B Block with a raised deck resulting in an increase of stroke from 3.18 inches to 3.75 inches. In 1960 and 1961, Chrysler began offering RB-engine vehicles with its new "cross ram" induction system that had been developed by the Ramchargers Club - a group of Chrysler engineers - on their 1949 Plymouth drag race car "High and Mighty." This iteration of the cross-ram system was designated as "long ram," as the carburetors were placed flanking the motor.

In 1962, Chrysler introduced its new high-performance version of the 413 RB Block motor: the Maximum Performance Wedge. This engine had been in development since 1959 and employed "short ram" induction, wherein the carburetors were fitted diagonally on the intake manifold. The "Max Wedge" option was available exclusively in Chrysler's new-for-1962 intermediate B Platform in Dodges and Plymouths only. Chrysler had developed the option in part to capitalize on the rising popularity in NHRA super stock racing. Although Max Wedge cars were street legal, they were intended for racing purposes.

First-year Max Wedge engines were 413 cubic inches and came in 410 and 420 horsepower versions. Dodge called its engine the "Ramcharger 413" while Plymouth called it the "Super Stock 413." In 1963, the engine's displacement increased to 426 cubic inches as the bore was increased from 4.19 to 4.25 inches. In May of that year, an improved version of the 426 was released, named the "Stage II." No motors were ever named "Stage 1." 1963-engines were available in 415 and 425 horsepower versions. 1964 was the final year of the Max Wedge option. The engine for the third year was named the "Stage III." Max Wedge cars equipped with four-speed transmissions were only produced in the final year, as prior to that point Chrysler did not have a manual transmission that could handle the power of the engine. In 1964, only 61 Dodges and 65 Plymouths were equipped with Chrysler's A-833 manual transmission.

Max Wedge cars are an essential part of automotive history as they are among the first vehicles that offered a high-performance big-block engine in an intermediate-bodied car, becoming something of a proto-muscle cars. Oldsmobile had begun the move in that direction by putting its industry-leading Rocket V8 from its luxury 98 series into the smaller 88 already in 1949, and Rambler had put its largest V8 into its intermediate sized Rebel in 1957. General Motors and Ford introduced intermediate platforms with large V8 in 1958. The 1962 413 Max Wedge Dodges and Plymouths slightly preceded the growing wave of proto-Muscle Cars that gained momentum with the 427 Ford Fairlane Thunderbolt (1964) and 427 Mercury Comet Cyclone (1964), 389 Pontiac GTO (1964), 396 Chevrolet Chevelle (1965), 400 Buick Gran Sport (1965), 400 Oldsmobile 442 (1965), and 390/427 Ford Fairlane (1966), and 390 Mercury Cyclone (1966).

Despite their historical significance and low production numbers, Max Wedge cars have not reached the same level of collectible desirability as other comparable muscle cars.

Specifications

Following are the specifications for 1962 to 1964 Max Wedge engines:

DodgePlymouth
1962"Ramcharger 413"

413 cubic inches

410 horsepower (11.0:1 compression) or 420 horsepower (13.5:1 compression)

"Super Stock 413"

413 cubic inches

410 horsepower (11.0:1 compression) or 420 horsepower (13.5:1 compression)

1963"Ramcharger 426" and "Ramcharger 426 II"

426 cubic inches

415 horsepower (11.0:1 compression) or 425 horsepower (13.5:1 compression)

"Super Stock 426" and "Super Stock 426 II"

426 cubic inches

415 horsepower (11.0:1 compression) or 425 horsepower (13.5:1 compression)

1964"Ramcharger 426 III"

426 cubic inches

415 horsepower (11.0:1 compression) or 425 horsepower (12.5:1 compression)

"Super Stock 426 III"

426 cubic inches

415 horsepower (11.0:1 compression) or 425 horsepower (12.5:1 compression)

Production numbers

Following are the production numbers for 1962 to 1964 Max Wedge Dodges and Plymouths:

DodgePlymouth
1962214298
1963
1964

Related Research Articles

<span class="mw-page-title-main">Muscle car</span> High-performance car

Muscle car is a description according to the online Merriam-Webster Dictionary in 2022 that came to use in 1966 for "a group of American-made two-door sports coupes with powerful engines designed for high-performance driving." The online Britannica Dictionary described these in 2022 as "an American-made two-door sports car with a powerful engine."

<span class="mw-page-title-main">Ford FE engine</span> Reciprocating internal combustion engine

The Ford FE engine is a V8 engine produced by the Ford Motor Company and used in vehicles sold in the North American market between 1958 and 1976. The FE, derived from 'Ford-Edsel', was introduced to replace the short-lived Ford Y-block engine, which American cars and trucks were outgrowing. It was designed with room to be significantly expanded, and manufactured both as a top-oiler and side-oiler, and in displacements between 332 cu in (5.4 L) and 428 cu in (7.0 L).

<span class="mw-page-title-main">Plymouth Barracuda</span> Car model built by Chrysler Corporation

The Plymouth Barracuda is a two-door pony car that was manufactured by Chrysler Corporation from 1964 through 1974 model years.

<span class="mw-page-title-main">Dodge Dart</span> Motor vehicle

The Dodge Dart is a line of large passenger cars produced by Dodge from the 1959 to 1976 model years in North America, with production extended to later years in various other markets.

<span class="mw-page-title-main">Chrysler B engine</span> Reciprocating internal combustion engine

The Chrysler B and RB engines are a series of big-block V8 gasoline engines introduced in 1958 to replace the Chrysler FirePower engines. The B and RB engines are often referred to as "wedge" engines because they use wedge-shaped combustion chambers; this differentiates them from Chrysler's 426 Hemi big block engines that are typically referred to as "Hemi" or "426 Hemi" due to their hemispherical shaped combustion chambers. The corporation had been seeking a smaller and lighter replacement for its FirePower engines, in part because new styling dictates meant moving the engine forward in the chassis which negatively affected weight distribution.

<span class="mw-page-title-main">Chrysler LA engine</span> Reciprocating internal combustion engine

The LA engine is a family of overhead-valve small-block 90° V-configured gasoline engines built by Chrysler Corporation between 1964 and 2003. A replacement of the Chrysler A engine, they were factory-installed in passenger vehicles, trucks and vans, commercial vehicles, marine and industrial applications. Their combustion chambers are wedge-shaped, rather than polyspheric, as in the A engine, or hemispheric in the Chrysler Hemi. LA engines have the same 4.46 in (113 mm) bore spacing as the A engines.

<span class="mw-page-title-main">Dodge Coronet</span> American car model sold 1949–1959, 1965–1976

The Dodge Coronet is an automobile that was marketed by Dodge in seven generations, and shared nameplates with the same bodyshell with varying levels of equipment installed. Introduced as a full-size car in 1949, it was the division's highest trim line and moved to the lowest level starting in 1955 through 1959. The name was reintroduced on intermediate-sized models from the 1965 until 1976 model years. Muscle car versions were available starting in 1965 with the 383 and 426 wedge cu in Chrysler RB engine, followed in 1966 by the powerful 426 cu in Chrysler Hemi. Other performance models included the "Superbee", and featured, the 383 cu in Magnum, among other engine options. The nameplate "coronet" is a type of crown worn by royalty.

<span class="mw-page-title-main">Plymouth Belvedere</span> Motor vehicle

The Plymouth Belvedere is a series of American automobile models made by Plymouth from 1954 until 1970.

<span class="mw-page-title-main">Plymouth Savoy</span> Motor vehicle

The Plymouth Savoy is an automobile model produced from the 1954 through 1964 model years by Plymouth.

<span class="mw-page-title-main">TorqueFlite</span> Automatic transmission made by Chrysler

TorqueFlite is the trademarked name of Chrysler Corporation's automatic transmissions, starting with the three-speed unit introduced late in the 1956 model year as a successor to Chrysler's two-speed PowerFlite. In the 1990s, the TorqueFlite name was dropped in favor of alphanumeric designations, although the latest Chrysler eight-speed automatic transmission has revived the name.

<span class="mw-page-title-main">Dodge Ramcharger</span> Motor vehicle

The Dodge Ramcharger is a large sport utility vehicle built by Dodge from 1974 to 1993, based on a shortened-wheelbase version of the Dodge D series/Ram pickup chassis. A Plymouth version, named the Plymouth Trail Duster, offered from 1974 to 1981, was Plymouth's only SUV.

<span class="mw-page-title-main">Dodge Super Bee</span> Motor vehicle

The Dodge Super Bee is a mid-sized muscle car marketed by Dodge, that was produced for the 1968 through 1971 model years.

<span class="mw-page-title-main">Dodge D series</span> Motor vehicle

The D series is a line of pickup trucks that was sold by Dodge from October 1960 to September 30, 1993. The same basic design was retained until the October 1993 introduction of a completely redesigned Ram. The D/W series shared its AD platform with the Dodge Ramcharger/Plymouth Trail Duster twins. Two-wheel-drive (4×2) models were designated D, while four-wheel-drive (4×4) models were designated W.

<span class="mw-page-title-main">Chrysler Hemi engine</span> Series of I6 and V8 engines built by Chrysler

The Chrysler Hemi engines, known by the trademark Hemi or HEMI, are a series of American V8 gasoline engines built by Chrysler with overhead valve hemispherical combustion chambers. Three different types of Hemi engines have been built by Chrysler for automobiles: the first from 1951 to 1958, the second from 1964 to 1971, and the third from 2003 to 2024. Although Chrysler is most identified with the use of "Hemi" as a marketing term, many other auto manufacturers have incorporated similar designs. The engine block and cylinder heads were cast and manufactured at Indianapolis Foundry.

<span class="mw-page-title-main">Dodge Polara</span> Motor vehicle

The Dodge Polara is an automobile introduced in the United States for the 1960 model year as Dodge's top-of-the-line full-size car. After the introduction of the Dodge Custom 880 in 1962, the Polara nameplate designated a step below the full-sized best-trimmed Dodge model; the Polara that year had been downsized to what was in effect intermediate, or mid-size status. In its various forms, the Polara name was used by Dodge until 1973, when its position in Dodge's line-up was replaced by the Dodge Monaco.

<span class="mw-page-title-main">Dodge Custom 880</span> Motor vehicle

The Dodge Custom 880 is an automobile that was marketed by Dodge from 1962 through the end of the 1965 model year. It was positioned as Dodge's product offer in the mid-price full-size market segment and to help fill the void in Chrysler's lineup left by the discontinuation of DeSoto in 1961.

<span class="mw-page-title-main">Fiat Chrysler Australia</span> Automobile manufacturer

FCA Australia, known unofficially as Chrysler Australia or Stellantis Australia, is the official Stellantis subsidiary in that country, operating as distributor of Chrysler, Jeep, Dodge, Abarth, Alfa Romeo and Fiat vehicles. However, there had previously been a "Chrysler Australia Ltd" which had operated as a vehicle manufacturer in Australia from 1951 until 1980, and was subsequently taken over by Mitsubishi Motors Australia.

American Muscle Car is a weekly television show on Speed, produced by Restoration Productions LLC., about muscle cars. Original release was in 2003. Each episode provides a timeline of each vehicle's history beginning with its first year of production to its most recent year of production. The show was initially designed to showcase traditional muscle cars such as the Chevrolet Camaro, Ford Mustang, and Dodge Charger. It eventually added other performance vehicles such as the Shelby Cobra and the, and even began to focus on specific eras such as the (disambiguation)|. In 2006 season, the show's focus was expanded to include designers and engineers of muscle car era.

Tom Hoover was the leading engineer of the Chrysler 426 Hemi engine.

References