Opel 8/40 PS

Last updated
1927-28: Opel 7/34 PS
1928-30: Opel 8/40 PS
Opel touring car (8353272381).jpg
Opel 8/40 (1928) at Autoworld Brussels, Belgium, 2011
Overview
Manufacturer Opel
Production1927 - 1930
Assembly Rüsselsheim
Body and chassis
Body style
Layout FR layout
Powertrain
Engine
  • 1735 cc s/v I6 (7/34 PS)
  • 1924 cc s/v I6 (8/40 PS)
Transmission 3-speed manual
Dimensions
Wheelbase 2,880 mm (113 in)
Length1927-28: 4,250 mm (167 in)
1928-29: 4,350 mm (171 in)
1929-30: 4,500 mm (180 in)
Width1927-29: 1,520 mm (60 in)
1929-30: 1,550 mm (61 in)
Height1927-29: 1,860 mm (73 in)
1929-30: 1,740 mm (69 in)
Chronology
Successor Opel 1.8 Liter

The Opel 7/34 PS is a large but relatively inexpensive six-cylinder-powered car manufactured by Opel, introduced in October 1927. It was replaced in 1928 by the Opel 8/40 PS which was virtually identical except that the cylinder capacity had been increased. Significant changes to the chassis took place in February 1929, after which production of the model continued till September 1930. [1] The 8/40 PS was replaced by the Opel 1.8 Liter in 1931, also a compact six-cylinder car. [2]

Contents

Naming convention

The name of the car described the engine and followed the widely followed German convention of the time whereby the first number – here "7" or "8" – identified the car’s tax horsepower (Steuer-PS) (effectively, in the case of German cars of the period, a linear function of the engine capacity) and the second represented the manufacturer’s figure for the actual horsepower. [3]

Engine, transmission and brakes

The engine at launch was a 6-cylinder side-valve 1,735 cc unit for which the manufacturer quoted a maximum output of 34 PS (25 kW; 34 hp) at 3,600 rpm. This engine has a 62 mm × 95 mm (2.44 in × 3.74 in) bore and stroke and was derived from the little four-cylinder used in the Opel Laubfrosch. [4] This supported a claimed top speed of 90 km/h (56 mph). A year later the engine size was increased to 1,924 cc and claimed maximum output increased to 40 PS (29 kW; 39 hp), still at 3,600 rpm. The bore and stroke were both increased, to 64 mm × 100 mm (2.52 in × 3.94 in). [4] Despite the listed weights of 720 kg in bare chassis form and 1170 kg with a standard “Limousine” (sedan/saloon) body being unchanged, along with the gear ratios, the increase in claimed power was not accompanied by any change in the claimed top speed, which remained at 90 km/h (56 mph).

The three-speed manual transmission, controlled using a lever in the middle of the floor, conveyed power to the rear wheels. The footbrake operated on all four wheels via a cable linkage while the handbrake connected directly to the drive shaft. [3]

The virtue of simplicity

The engineering approach taken by Opel was consciously unadventurous. The least expensive version between 1927 and 1929, the Torpedo bodied “Tourenwagen” was priced at 4,600 Mark throughout these years, which was inexpensive to make it the least expensive six-cylinder-engined car available in Germany. [5] The unadventurous design is also reflected in that it can be very hard to distinguish an 8/40 PS from one of Opel's "senior" sixes (12/50, 15/60); unless one can compare the wheelbases the easiest way to tell them apart is that the light six uses four rather than five wheel nuts. [6]

Opel’s ability to undercut the competition on price stemmed both from the simplicity of the design and from the fact that Opel was the first, and at this time still the only manufacturer in Germany using a Ford-inspired production line system. Under the circumstances it is not hard to see why Opel was an appealing target when General Motors (GM) were contemplating the acquisition of a major German auto-maker. In March 1929 GM purchased a controlling 80% share in the Opel business.

The bodies

In addition to the Torpedo bodied "Tourenwagen" the Opel 7/34 PS was available at launch as a closed 4-door "Limousine" (sedan/saloon) with a listed price of 4,900 Mark or, for a further 500 Mark, as a 4-door "Luxus-Limousine." They all sat on the same 4,250 mm (167 in) chassis with a 2,880 mm (113 in) wheelbase. [5]

The replacement of the original car with the more powerful Opel 8/40 PS was accompanied by a broadening of the range which now also included a two-seater "Roadster," a two-seater Coupé and a two-seater Cabriolet. The three four-door bodies were offered as before, still using the same 2,880 mm (113 in) wheelbase, but for the new two-seater models Opel used a shorter chassis with a 2,750 mm (108 in) wheelbase. [5]

In addition to the standard bodies, some special coachbuilt bodied cars were also produced, notably by Karosseriewerke Otto Kühn  [ de ] of Halle who specialised in producing bodies for Opel, concentrating on styles for which demand was insufficient to justify Opel tooling-up to build the bodies themselves. Kühn also manufactured an 8/40-engined car of their own design, using their own chassis as well as bodywork, until 1929. [7] This car was marketed as the "Kühn 8/40 PS."

Switch to an underslung chassis

The "Limousine"-bodied cars underwent a significant upgrade, with slightly longer bodies (despite the wheelbase being unchanged) early in 1929. The principal change was the switch from a traditional Hochbett ("Overslung") chassis to a Tiefbett ("Underslung") chassis. [lower-roman 1] [1] Opel’s principal competitor for this model was probably the Adler Standard 6 which underwent the same change only in 1933.

Commercial

The 7/34 PS and 8/40 PS between them notched up 20,580 units produced during a production run of approximately three years. It took Adler a little more than seven years to produce 21,249 comparably sized Standard 6s. No other German auto-maker of cars this size (or any size) approached Opels' production volumes in the 1920s. [4]

Related Research Articles

Opel Olympia Motor vehicle

The Opel Olympia is a compact car by German automaker Opel, then part of G.M., from 1935 to 1940, and after World War II continued from 1947 to 1953. It was one of the world's first mass-produced cars with a unitary body structure, after the 1934 Citroën Traction Avant; and it was a mass-production success, made in six-figure numbers. Opel achieved this even before the war, all while Hitler promised Germany a "Volkswagen" - a 'People's car', which didn't materialize until 1946.
From 1967-1970 the Olympia badge was briefly reused on a later car.

Opel Admiral Motor vehicle

The Opel Admiral is a luxury car made by the German car manufacturer Opel from 1937 until 1939 and again from 1964 until 1977.

Opel Laubfrosch Motor vehicle

The Opel 4 PS, popularly known as the Laubfrosch (treefrog), is a small two-seater car introduced by the auto maker Opel early in 1924. Subsequently, various versions of the little Laubfrosch were produced until it was replaced by the Opel 1.2 litre.

Adler Diplomat Motor vehicle

The Adler Diplomat is a substantial six-cylinder “limousine” (saloon) built by the Frankfurt auto-maker, Adler. It was introduced in March 1934 as a direct replacement for the manufacturer's Standard 6. Less directly the six-cylinder Diplomat also replaced the Adler Standard 8 since Adler's large eight-cylinder car was discontinued in 1934 without a direct replacement of its own.

Mercedes-Benz W10 Motor vehicle

The Mercedes-Benz Mannheim 350 replaced the W03/Typ 350 models in 1929. The structure originated by Ferdinand Porsche was modified by Hans Nibel.

DKW Typ 4=8 Motor vehicle

The DKW Typ 4=8 is a small rear-wheel drive two-stroke V4 engined car produced at the company's Spandau plant by DKW. It was launched at the Berlin Motor-show in 1929 as a successor to the DKW Typ P built at the same factory, although the DKW Typ P 4=8 was significantly larger than the Typ P: in terms of market positioning a more direct successor to the DKW Type P was probably the DKW F1 produced in Zwickau from 1931.

Adler Standard 6 Motor vehicle

The Adler Standard 6 was the most important newcomer at the Berlin Motor Show in October 1926. It was a substantial six cylinder “limousine” (saloon) built by the Frankfurt auto-maker, Adler. Other body styles were available from coach builders. The model continued to be produced until 1934.

Mercedes-Benz W143 Motor vehicle

The Mercedes-Benz Typ 230 n was introduced by Mercedes-Benz in 1937 as a successor to the Typ 230 . It was one of several models over the space of nearly eight decades to be sold with a name along the lines "Mercedes-Benz 230", and is therefore in retrospect more normally named according to its internal works designation as the Mercedes-Benz W 143

The Adler Standard 8 is a large passenger car introduced in 1928 by the Frankfurt auto-maker, Adler. It was a big eight cylinder “limousine” (saloon) closely modelled on the manufacturer’s Standard 6 which had first appeared in public in October 1926. However the Standard 8 had a longer 3,325 mm (130.9 in) wheelbase as well as a 50 mm (2.0 in) wider track. Although it closely resembled the Standard 6, the Standard 8 was larger all round. The Standard 8 engine had eight cylinders, but individually the cylinder dimensions, at 75 mm (3.0 in) x 110 mm (4.3 in), were identical to those on the six cylinder car as well as on the four cylinder with the Adler Favorit which appeared in 1929.

Opel 1.3 litre Motor vehicle

The Opel 1.3-litre is a small car manufactured by Opel. Production commenced in January 1934, although a few pre-production cars had been built during the final part of 1933.

Opel 2.0 litre Motor vehicle

The Opel 2.0-litre, also known as the Opel »6«, is an executive car that was manufactured by Opel. Produced from January 1934, the 2.0-litre replaced the Opel 1.8 litre which had ceased production in November 1933. Production continued till June 1937, but the replacement model, the Opel Super 6, was already in production in November 1936, after which production volumes for the 2.0-litre were very much diminished.

The Opel 10/40 PS is a luxury car manufactured by Opel.

Mercedes-Benz W21 Motor vehicle

The Mercedes-Benz W 21 was a six-cylinder passenger car launched in 1933 using the name Mercedes-Benz Typ 200. It was one of several Mercedes-Benz models known, in its own time, as the Mercedes-Benz 200 and is therefore in retrospect more commonly referred to using its Mercedes-Benz works number, “W21”.

Mercedes-Benz W142 Motor vehicle

The Mercedes-Benz W 142 was a six-cylinder passenger car launched in February 1937, as a successor to the Mercedes-Benz Typ 290. The car was known by its name Typ 320 at the time of its production and service, but is in retrospect commonly referred to using its Mercedes-Benz works number, "W142", which gives a more unambiguously unique nomenclature.

Mercedes-Benz W08 Motor vehicle

The Mercedes-Benz Nürburg 460 was introduced in Autumn 1928, Mercedes-Benz's first eight-cylinder passenger car. Designated model W 08 was by the factory, it remained in production with various modifications and upgrades until the later summer of 1939, the longest lived Mercedes-Benz model of the 1920s and 1930s.

Mercedes-Benz W18 Motor vehicle

The Mercedes-Benz W18 was a six-cylinder automobile introduced as the Mercedes-Benz Typ 290 in 1933. It was a smaller-engined successor to the manufacturer’s Typ 350 / 370 Mannheim model. In terms of the German auto-business of the 1930s it occupied a market position roughly equivalent to that filled by the Mercedes-Benz E-Class in the closing decades of the twentieth century. The W18 was replaced in 1937 by the manufacturer’s W142.

Mercedes 15/70/100 PS Motor vehicle

The Mercedes 15/70/100 PS was a large automobile introduced by Daimler in 1924. Production continued till 1929 by which time Daimler had merged with Benz & Cie as a result of which the car's name had changed to Mercedes-Benz Typ 400.

Mercedes 24/100/140 PS Motor vehicle

The Mercedes 24/100/140 PS was a large luxury car introduced by Daimler of Untertürkheim in 1924. Production continued until 1929 by which time Daimler had merged with Benz & Cie and the car's name changed to Mercedes-Benz Typ 630. The car was conceptually and structurally similar to the contemporary Mercedes 15/70/100 PS, but the 24/100/140 PS was longer, heavier, more powerful, faster and more expensive.

Mercedes-Benz W11 Motor vehicle

The Mercedes-Benz W11 was a midsize six-cylinder automobile introduced by Daimler-Benz it 1929. It was developed from the Mercedes-Benz W02 first seen in 1926, and the W11 shared its chassis and bodywork with the W02, but the W11 came with a larger more powerful engine, a new name and a wider list of “standard bodies” from which customers could choose.

Mercedes-Benz W03 Motor vehicle

The Mercedes-Benz W03 was a large six-cylinder-engined automobile introduced as the Mercedes-Benz 12/55 PS and, initially, as the Mercedes-Benz Typ 300, by Daimler-Benz at the Berlin Motor Show in October 1926. It was developed in some haste under the manufacturer's Technical Director, Ferdinand Porsche in parallel with the smaller Mercedes-Benz W 01 and the two-litre-engined Mercedes-Benz W02 following the creation of Daimler-Benz, formally in July 1926, from the fusion of the Daimler and Benz & Cie auto-businesses.

References

  1. An overslung chassis sits directly above the car's axles, the axle ends and wheels being fixed directly below the chassis frame. An underslung chassis hangs directly below the axles, resulting in a lowered centre of gravity and a lower look for the car.
  1. 1 2 Oswald (2001), p. 306.
  2. Ludvigsen, Karl E. (1975), Opel: wheels to the world; a seventy-five year history of automobile manufacture, Princeton Publishing, p. 49, ISBN   0-915038-01-3
  3. 1 2 Oswald (2001), p. 307.
  4. 1 2 3 Ludvigsen, p. 39
  5. 1 2 3 Oswald (2001), pp. 306–307.
  6. Schlenger, Michael (2018-12-18). "Groß in Szene: Opels kleine 6-Zylinder 7/34 und 8/40 PS" [Big on the Scene: Opel's small six-cylinders, the 7/34 and 8/40 PS]. Vorkriegs-Klassiker-Rundschau (in German).
  7. Georgano, G. N.; Andersen, Thorkil Ry (1982), The New encyclopedia of motorcars: 1885 to the present, New York: E. P. Dutton, p.  355, ISBN   9780525932543