Periodic table of topological invariants

Last updated

The periodic table of topological invariants is an application of topology to physics. It indicates the group of topological invariant for topological insulators and topological superconductors in each dimension and in each discrete symmetry class. [1]

Contents

Discrete symmetry classes

There are ten discrete symmetry classes of topological insulators and superconductors, corresponding to the ten Altland–Zirnbauer classes of random matrices. They are defined by three symmetries of the Hamiltonian , (where , and , are the annihilation and creation operators of mode , in some arbitrary spatial basis) : time reversal symmetry, particle hole (or charge conjugation) symmetry, and chiral (or sublattice) symmetry.

Chiral symmetry is a unitary operator , that acts on , as a unitary rotation (,) and satisfies . A Hamiltonian possesses chiral symmetry when , for some choice of (on the level of first-quantised Hamiltonians, this means and are anticommuting matrices).

Time reversal is an antiunitary operator , that acts on , (where , is an arbitrary complex coefficient, and , denotes complex conjugation) as . It can be written as where is the complex conjugation operator and is a unitary matrix. Either or . A Hamiltonian with time reversal symmetry satisfies , or on the level of first-quantised matrices, , for some choice of .

Charge conjugation is also an antiunitary operator which acts on as , and can be written as where is unitary. Again either or depending on what is. A Hamiltonian with particle hole symmetry satisfies , or on the level of first-quantised Hamiltonian matrices, , for some choice of .

In the Bloch Hamiltonian formalism for periodic crystals, where the Hamiltonian acts on modes of crystal momentum , the chiral symmetry, TRS, and PHS conditions become , and .

It is evident that if two of these three symmetries are present, then the third is also present, due to the relation .

The aforementioned discrete symmetries label 10 distinct discrete symmetry classes, which coincide with the Altland–Zirnbauer classes of random matrices.

Symmetry ClassTime reversal symmetryParticle hole symmetryChiral symmetry
ANoNoNo
AIIINoNoYes
AIYes, NoNo
BDIYes, Yes, Yes
DNoYes, No
DIIIYes, Yes, Yes
AIIYes, NoNo
CIIYes, Yes, Yes
CNoYes, No
CIYes, Yes, Yes

Equivalence classes of Hamiltonians

A bulk Hamiltonian in a particular symmetry group is restricted to be a Hermitian matrix with no zero-energy eigenvalues (i.e. so that the spectrum is "gapped" and the system is a bulk insulator) satisfying the symmetry constraints of the group. In the case of dimensions, this Hamiltonian is a continuous function of the parameters in the Bloch momentum vector in the Brillouin zone; then the symmetry constraints must hold for all .

Given two Hamiltonians and , it may be possible to continuously deform into while maintaining the symmetry constraint and gap (that is, there exists continuous function such that for all the Hamiltonian has no zero eigenvalue and symmetry condition is maintained, and and ). Then we say that and are equivalent.

However, it may also turn out that there is no such continuous deformation. in this case, physically if two materials with bulk Hamiltonians and , respectively, neighbor each other with an edge between them, when one continuously moves across the edge one must encounter a zero eigenvalue (as there is no continuous transformation that avoids this). This may manifest as a gapless zero energy edge mode or an electric current that only flows along the edge.

An interesting question is to ask, given a symmetry class and a dimension of the Brillouin zone, what are all the equivalence classes of Hamiltonians. Each equivalence class can be labeled by a topological invariant; two Hamiltonians whose topological invariant are different cannot be deformed into each other and belong to different equivalence classes.

Classifying spaces of Hamiltonians

For each of the symmetry classes, the question can be simplified by deforming the Hamiltonian into a "projective" Hamiltonian, and considering the symmetric space in which such Hamiltonians live. These classifying spaces are shown for each symmetry class: [2]

Symmetry classClassifying spaceof Classifying space
A
AIII
AI
BDI
D
DIII
AII
CII
C
CI

For example, a (real symmetric) Hamiltonian in symmetry class AI can have its positive eigenvalues deformed to +1 and its negative eigenvalues deformed to -1; the resulting such matrices are described by the union of real Grassmannians

Classification of invariants

The strong topological invariants of a many-band system in dimensions can be labeled by the elements of the -th homotopy group of the symmetric space. These groups are displayed in this table, called the periodic table of topological insulators:

Symmetry class
A
AIII
AI
BDI
D
DIII
AII
CII
C
CI

There may also exist weak topological invariants (associated to the fact that the suspension of the Brillouin zone is in fact equivalent to a sphere wedged with lower-dimensional spheres), which are not included in this table. Furthermore, the table assumes the limit of an infinite number of bands, i.e. involves Hamiltonians for .

The table also is periodic in the sense that the group of invariants in dimensions is the same as the group of invariants in dimensions. In the case of no antiunitary symmetries, the invariant groups are periodic in dimension by 2.

For nontrivial symmetry classes, the actual invariant can be defined by one of the following integrals over all or part of the Brillouin zone: the Chern number, the Wess-Zumino winding number, the Chern–Simons invariant, the Fu–Kane invariant.

Dimensional reduction and Bott clock

The periodic table also displays a peculiar property: the invariant groups in dimensions are identical to those in dimensions but in a different symmetry class. Among the complex symmetry classes, the invariant group for A in dimensions is the same as that for AIII in dimensions, and vice versa. One can also imagine arranging each of the eight real symmetry classes on the Cartesian plane such that the coordinate is if time reversal symmetry is present and if it is absent, and the coordinate is if particle hole symmetry is present and if it is absent. Then the invariant group in dimensions for a certain real symmetry class is the same as the invariant group in dimensions for the symmetry class directly one space clockwise. This phenomenon was termed the "Bott clock" by Alexei Kitaev, in reference to the Bott periodicity theorem. [1] [3]

The Bott clock can be understood by considering the problem of Clifford algebra extensions. [1] Near an interface between two inequivalent bulk materials, the Hamiltonian approaches a gap closing. To lowest order expansion in momentum slightly away from the gap closing, the Hamiltonian takes the form of a Dirac Hamiltonian . Here, are a representation of the Clifford Algebra , while is an added "mass term" that and anticommutes with the rest of the Hamiltonian and vanishes at the interface (thus giving the interface a gapless edge mode at ). The term for the Hamiltonian on one side of the interface cannot be continuously deformed into the term for the Hamiltonian on the other side of the interface. Thus (letting be an arbitrary positive scalar) the problem of classifying topological invariants reduces to the problem of classifying all possible inequivalent choices of to extend the Clifford algebra to one higher dimension, while maintaining the symmetry constraints.

See also

Related Research Articles

<span class="mw-page-title-main">Pauli matrices</span> Matrices important in quantum mechanics and the study of spin

In mathematical physics and mathematics, the Pauli matrices are a set of three 2 × 2 complex matrices which are Hermitian, involutory and unitary. Usually indicated by the Greek letter sigma, they are occasionally denoted by tau when used in connection with isospin symmetries.

In particle physics, the Dirac equation is a relativistic wave equation derived by British physicist Paul Dirac in 1928. In its free form, or including electromagnetic interactions, it describes all spin-12 massive particles, called "Dirac particles", such as electrons and quarks for which parity is a symmetry. It is consistent with both the principles of quantum mechanics and the theory of special relativity, and was the first theory to account fully for special relativity in the context of quantum mechanics. It was validated by accounting for the fine structure of the hydrogen spectrum in a completely rigorous way.

In physics, charge conjugation is a transformation that switches all particles with their corresponding antiparticles, thus changing the sign of all charges: not only electric charge but also the charges relevant to other forces. The term C-symmetry is an abbreviation of the phrase "charge conjugation symmetry", and is used in discussions of the symmetry of physical laws under charge-conjugation. Other important discrete symmetries are P-symmetry (parity) and T-symmetry.

<span class="mw-page-title-main">Loop quantum gravity</span> Theory of quantum gravity, merging quantum mechanics and general relativity

Loop quantum gravity (LQG) is a theory of quantum gravity, which aims to reconcile quantum mechanics and general relativity, incorporating matter of the Standard Model into the framework established for the intrinsic quantum gravity case. It is an attempt to develop a quantum theory of gravity based directly on Einstein's geometric formulation rather than the treatment of gravity as a mysterious mechanism (force). As a theory, LQG postulates that the structure of space and time is composed of finite loops woven into an extremely fine fabric or network. These networks of loops are called spin networks. The evolution of a spin network, or spin foam, has a scale above the order of a Planck length, approximately 10−35 meters, and smaller scales are meaningless. Consequently, not just matter, but space itself, prefers an atomic structure.

<span class="mw-page-title-main">De Rham cohomology</span> Cohomology with real coefficients computed using differential forms

In mathematics, de Rham cohomology is a tool belonging both to algebraic topology and to differential topology, capable of expressing basic topological information about smooth manifolds in a form particularly adapted to computation and the concrete representation of cohomology classes. It is a cohomology theory based on the existence of differential forms with prescribed properties.

<span class="mw-page-title-main">Linking number</span> Numerical invariant that describes the linking of two closed curves in three-dimensional space

In mathematics, the linking number is a numerical invariant that describes the linking of two closed curves in three-dimensional space. Intuitively, the linking number represents the number of times that each curve winds around the other. In Euclidean space, the linking number is always an integer, but may be positive or negative depending on the orientation of the two curves.

Bosonic string theory is the original version of string theory, developed in the late 1960s and named after Satyendra Nath Bose. It is so called because it contains only bosons in the spectrum.

<span class="mw-page-title-main">Wheeler–DeWitt equation</span> Field equation, part of a theory that attempts to combine quantum mechanics and general relativity

The Wheeler–DeWitt equation for theoretical physics and applied mathematics, is a field equation attributed to John Archibald Wheeler and Bryce DeWitt. The equation attempts to mathematically combine the ideas of quantum mechanics and general relativity, a step towards a theory of quantum gravity.

In theoretical physics and mathematics, a Wess–Zumino–Witten (WZW) model, also called a Wess–Zumino–Novikov–Witten model, is a type of two-dimensional conformal field theory named after Julius Wess, Bruno Zumino, Sergei Novikov and Edward Witten. A WZW model is associated to a Lie group, and its symmetry algebra is the affine Lie algebra built from the corresponding Lie algebra. By extension, the name WZW model is sometimes used for any conformal field theory whose symmetry algebra is an affine Lie algebra.

In differential geometry, the four-gradient is the four-vector analogue of the gradient from vector calculus.

In quantum field theory, a fermionic field is a quantum field whose quanta are fermions; that is, they obey Fermi–Dirac statistics. Fermionic fields obey canonical anticommutation relations rather than the canonical commutation relations of bosonic fields.

In theoretical physics, the Wess–Zumino model has become the first known example of an interacting four-dimensional quantum field theory with linearly realised supersymmetry. In 1974, Julius Wess and Bruno Zumino studied, using modern terminology, dynamics of a single chiral superfield whose cubic superpotential leads to a renormalizable theory.

<span class="mw-page-title-main">Canonical quantum gravity</span> A formulation of general relativity

In physics, canonical quantum gravity is an attempt to quantize the canonical formulation of general relativity. It is a Hamiltonian formulation of Einstein's general theory of relativity. The basic theory was outlined by Bryce DeWitt in a seminal 1967 paper, and based on earlier work by Peter G. Bergmann using the so-called canonical quantization techniques for constrained Hamiltonian systems invented by Paul Dirac. Dirac's approach allows the quantization of systems that include gauge symmetries using Hamiltonian techniques in a fixed gauge choice. Newer approaches based in part on the work of DeWitt and Dirac include the Hartle–Hawking state, Regge calculus, the Wheeler–DeWitt equation and loop quantum gravity.

The quantum Heisenberg model, developed by Werner Heisenberg, is a statistical mechanical model used in the study of critical points and phase transitions of magnetic systems, in which the spins of the magnetic systems are treated quantum mechanically. It is related to the prototypical Ising model, where at each site of a lattice, a spin represents a microscopic magnetic dipole to which the magnetic moment is either up or down. Except the coupling between magnetic dipole moments, there is also a multipolar version of Heisenberg model called the multipolar exchange interaction.

In mathematical physics, spacetime algebra (STA) is a name for the Clifford algebra Cl1,3(R), or equivalently the geometric algebra G(M4). According to David Hestenes, spacetime algebra can be particularly closely associated with the geometry of special relativity and relativistic spacetime.

In mathematical physics, higher-dimensional gamma matrices generalize to arbitrary dimension the four-dimensional Gamma matrices of Dirac, which are a mainstay of relativistic quantum mechanics. They are utilized in relativistically invariant wave equations for fermions in arbitrary space-time dimensions, notably in string theory and supergravity. The Weyl–Brauer matrices provide an explicit construction of higher-dimensional gamma matrices for Weyl spinors. Gamma matrices also appear in generic settings in Riemannian geometry, particularly when a spin structure can be defined.

In physics, Berry connection and Berry curvature are related concepts which can be viewed, respectively, as a local gauge potential and gauge field associated with the Berry phase or geometric phase. The concept was first introduced by S. Pancharatnam as geometric phase and later elaborately explained and popularized by Michael Berry in a paper published in 1984 emphasizing how geometric phases provide a powerful unifying concept in several branches of classical and quantum physics.

In the ADM formulation of general relativity one splits spacetime into spatial slices and time, the basic variables are taken to be the induced metric, , on the spatial slice, and its conjugate momentum variable related to the extrinsic curvature, ,. These are the metric canonical coordinates.

<span class="mw-page-title-main">Loop representation in gauge theories and quantum gravity</span> Description of gauge theories using loop operators

Attempts have been made to describe gauge theories in terms of extended objects such as Wilson loops and holonomies. The loop representation is a quantum hamiltonian representation of gauge theories in terms of loops. The aim of the loop representation in the context of Yang–Mills theories is to avoid the redundancy introduced by Gauss gauge symmetries allowing to work directly in the space of physical states. The idea is well known in the context of lattice Yang–Mills theory. Attempts to explore the continuous loop representation was made by Gambini and Trias for canonical Yang–Mills theory, however there were difficulties as they represented singular objects. As we shall see the loop formalism goes far beyond a simple gauge invariant description, in fact it is the natural geometrical framework to treat gauge theories and quantum gravity in terms of their fundamental physical excitations.

In mathematical physics, Clebsch–Gordan coefficients are the expansion coefficients of total angular momentum eigenstates in an uncoupled tensor product basis. Mathematically, they specify the decomposition of the tensor product of two irreducible representations into a direct sum of irreducible representations, where the type and the multiplicities of these irreducible representations are known abstractly. The name derives from the German mathematicians Alfred Clebsch (1833–1872) and Paul Gordan (1837–1912), who encountered an equivalent problem in invariant theory.

References

  1. 1 2 3 Chiu, C.; J. Teo; A. Schnyder; S. Ryu (2016). "Classification of topological quantum matter with symmetries". Rev. Mod. Phys. 88 (35005): 035005. arXiv: 1505.03535 . Bibcode:2016RvMP...88c5005C. doi:10.1103/RevModPhys.88.035005. S2CID   119294876.
  2. Kitaev, Alexei. Periodic table for topological insulators and superconductors, AIP Conference Proceedings 1134, 22 (2009); doi : 10.1063/1.3149495, arXiv : 0901.2686
  3. Ryu, Shinsei. "General approach to topological classification". Topology in Condensed Matter. Retrieved 2018-04-30.