Single-rope technique

Last updated
The two-ascender "frog" is a sit-stand system. It is used among cavers worldwide. Frogging.jpg
The two-ascender "frog" is a sit-stand system. It is used among cavers worldwide.

Single-rope technique (SRT) is a set of methods used to descend and ascend on the same single rope. Single-rope technique is used in caving, potholing, rock climbing, canyoning, roped access for building maintenance and by arborists for tree climbing, although to avoid confusion in the tree climbing community, many have taken to calling it "stationary" rope technique.

Contents

Single-rope technique is used in contrast to double-rope technique (DRT), also known as moving-rope technique.

Historical developments

In the 1930s, as caving became increasingly popular in France, several clubs in the Alps made vertical cave exploration an outdoor sport. During World War II, a team composed of Pierre Chevalier, Fernand Petzl, Charles Petit-Didier and others explored the Dent de Crolles cave system near Grenoble, France, which became the deepest explored cave in the world (-658m) at that time. The lack of available equipment during the war forced Pierre Chevalier and the rest of the team to develop their own equipment, leading to technical innovation. The first use of single-rope technique with prusik and mechanical rope ascenders (Henri Brenot's "monkeys", first used by Chevalier and Brenot in a cave in 1934) can be directly traced back to the exploration of the Dent de Crolles cave system. American caver Bill Cuddington, known as "Vertical Bill" developed single-rope techniques in the U.S. in the late 1950s. In 1958, two Swiss alpinists, Juesi and Marti teamed together, creating the first commercially available rope ascender known as the Jumar. In 1968 Bruno Dressler asked Petzl, who worked as a metals machinist, to build a rope-ascending tool, today known as the Petzl Croll, that he had developed by adapting the Jumar for pit caving. Petzl started a small caving equipment manufacturing company Petzl, which manufactures equipment for caving, climbing, mountaineering and at-height safety in civil engineering. The rappel rack was developed in the late 1960s by cavers in the Huntsville, Alabama caving club to facilitate long descents. The evolution of mechanical ascension systems helped extend the practice and safety of pit exploration.

Ascent

For ascent (prusiking or "jugging"), cammed devices (ascenders, Jumar, Petzl Croll) are used that can be pushed up the rope but lock and hold the user's weight when a downward force is applied; these must also be easily removable from the rope without being detached from the user. Knots such as the prusik, Bachmann and Klemheist are used to ascend ropes in emergencies in climbing and mountaineering; they have ceased to be the primary ascent method in single-rope technique because they are slow in use, and ice or mud greatly reduce their efficiency.

Numerous prusik systems have been devised. Popular systems are:

Descent

caver passing a deviation SRT caving deviation.jpg
caver passing a deviation

Modern single-rope technique uses specialized devices for both descent and ascent, and low-stretch kernmantel rope of 8-11 mm diameter. Descent (abseiling or rappeling) uses various forms of friction brake to control speed. The most commonly used are the Petzl Stop (self-locking) and Bobbin, and rappel racks. For safe single-rope technique, especially on drops with complex rigging with intermediate belays, it is essential that the abseiling device can be removed from the rope without being unclipped from the harness. This is a problem with the simplest device, the single piece figure eight. These also twist the rope, which is a problem if there is a rebelay below so the rope cannot untwist itself. Figure eights and racks do have the advantage of being able to be used on a doubled rope. Other essential items of a personal single-rope technique set are a sit harness and one or more safety cords ("cow's tails") terminated in carabiners, for temporary attachment to safety ropes at the heads of drops and used in maneuvers at intermediate rope belays. To pass intermediate belays on a descent, the ascending devices may also be required.

Rigging

How the rope is sent down a shaft has great bearing on the type of single-rope technique used. In general, while rope-walking techniques may be very effective for climbing long unobstructed pitches, they prove less versatile in cases of awkward passages and complex rope rigging with re-belays used to avoid hazards such as loose rocks, waterfalls, and rope damage from rub points.

Rigging in the United States is typically done using a single anchor point, and pitches are rigged as a single long drop, often in excess of 100 meters. The rope is usually a thick abrasion-resistant type, which allows the rope to go over the lip of a shaft in contact with the rock. This is sometimes pejoratively called Indestructible Rope Technique. To descend such large drops on a bobbin-type descender would be difficult owing to the thickness and stiffness of the rope, and the resulting descent would be slow and jerky. The bobbin-descender could also overheat and melt the surface of the rope. Racks are preferred as they have a much larger heat sink capacity and offer a much smoother descent on such pitches. Using the frog system to ascend long pitches is time consuming, so rope-walking systems are preferred.

In Europe, pitches are often more complex, and multi-pitch rigging is used extensively. Long drops are broken into smaller pitches. Re-belays and deviations are used to direct the rope away from areas of sharp rock and from water. Where rope rub cannot be avoided, rope protectors are installed. Traverses are often installed to allow the rigger to reach an area where it is possible to hang the rope with no rub. Since allowing the rope to rub against the walls is prevented, lighter ropes are used, usually 8-9mm thick. This has the advantage of being lighter and therefore more economical to carry on long or deep trips. Bobbin descenders are quicker to change over at re-belays and are also lighter to carry. Deviations are short length of tape or rope pulling the main rope to one side with a carabiner which can be conveniently unclipped and replaced to allow passing. Rope-walking techniques are less effective in cases of awkward passageways and for changeovers at rebelays. Many caves have been equipped with bolt holes consisting of internally threaded metal inserts fixed into holes drilled in the rock. Subsequent visitors carry their own belay eyelets to bolt into these points. Selecting the best position for bolts needs particular care, the aim often being to achieve a Y-shaped rope hang between two bolts on opposite walls. This technique can help to prevent the rope from coming in contact with the rock, shares the load between the two belays, and reduces the shock load should one fail (in comparison with the use of a slack backup rope).

See also

Related Research Articles

<span class="mw-page-title-main">Caving</span> Recreational pastime of exploring cave systems

Caving, also known as spelunking and potholing, is the recreational pastime of exploring wild cave systems. In contrast, speleology is the scientific study of caves and the cave environment.

<span class="mw-page-title-main">Glossary of climbing terms</span> For rock climbing and mountaineering

Glossary of climbing terms relates to rock climbing, mountaineering, and to ice climbing.

<span class="mw-page-title-main">Rock-climbing equipment</span> List of manmade gear

Rock-climbing equipment varies with the type of climbing undertaken. Bouldering needs the least equipment outside of shoes and chalk and optional crash pads. Sport climbing adds ropes, harnesses, belay devices, and quickdraws to clip into pre-drilled bolts. Traditional climbing adds the need for carrying a "rack" of temporary passive and active protection devices. Multi-pitch climbing adds devices to assist in ascending and descending fixed ropes. And finally aid climbing uses unique equipment.

<span class="mw-page-title-main">Abseiling</span> Rope-controlled descent

Abseiling, also known as rappelling, is the controlled descent of a steep slope, such as a rock face, by moving down a rope. When abseiling, the person descending controls their own movement down the rope, in contrast to lowering off, in which the rope attached to the person descending is paid out by their belayer.

<span class="mw-page-title-main">Pitch (climbing)</span> Steep section of a climbing route requiring a rope

In climbing, a pitch is a section of a climbing route between two belay points, and is most commonly related to the task of lead climbing, but is also related to abseiling. Climbing on routes that require only one pitch is known as single-pitch climbing, and climbing on routes with more than one pitch is known as multi-pitch climbing.

<span class="mw-page-title-main">Rock climbing</span> Type of sport

Rock climbing is a sport in which participants climb up, across, or down natural rock formations or indoor climbing walls. The goal is to reach the summit of a formation or the endpoint of a usually pre-defined route without falling. Rock climbing is a physically and mentally demanding sport, one that often tests a climber's strength, endurance, agility and balance along with mental control. Knowledge of proper climbing techniques and the use of specialized climbing equipment is crucial for the safe completion of routes.

<span class="mw-page-title-main">Munter hitch</span> Adjustable knot used control friction in a belay system

The Munter hitch, also known as the Italian hitch, mezzo barcaiolo or the crossing hitch, is a simple adjustable knot, commonly used by climbers, cavers, and rescuers to control friction in a life-lining or belay system. To climbers, this hitch is also known as HMS, the abbreviation for the German term Halbmastwurfsicherung, meaning half clove hitch belay. This technique can be used with a special "pear-shaped" HMS locking carabiner, or any locking carabiner wide enough to take two turns of the rope.

<span class="mw-page-title-main">Multi-pitch climbing</span> Type of climbing

Multi-pitch climbing is a type of climbing that typically takes place on routes that are more than a single rope length in height, and thus where the lead climber cannot complete the climb as a single pitch. Where the number of pitches exceeds 6–10, it can become big wall climbing, or where the pitches are in a mixed rock and ice mountain environment, it can become alpine climbing. Multi-pitch rock climbs can come in traditional, sport, and aid formats. Some have free soloed multi-pitch routes.

<span class="mw-page-title-main">Ascender (climbing)</span> Devices used for ascending, braking, or protection in climbing

An ascender is a device used for directly ascending a rope, or for facilitating protection with a fixed rope when climbing on very steep mountain terrain.

<span class="mw-page-title-main">Petzl</span> French consumer goods company

Petzl is a French manufacturer of climbing gear, caving gear, work-at-height equipment, and headlamps based in Crolles, France. The company was created by the cave explorer Fernand Petzl in the mid-1970s. Their three specialties are:

<span class="mw-page-title-main">Prusik knot</span> Type of knot

A Prusik is a friction hitch or knot used to attach a loop of cord around a rope, applied in climbing, canyoneering, mountaineering, caving, rope rescue, ziplining, and by arborists. The term Prusik is a name for both the loops of cord used to tie the hitch and the hitch itself, and the verb is "to prusik". More casually, the term is used for any friction hitch or device that can grab a rope. Due to the pronunciation, the word is often misspelled Prussik, Prussick, or Prussic.

Pierre Chevalier was a well-known caver and mountaineer from France, with many alpine ascents and cave explorations to his credit. Chevalier is principally known for the exploration of the Dent de Crolles cave system over a twelve-year period, which became the deepest cave in the world. Chevalier recorded this exploration in his book Escalades souterraines.

<span class="mw-page-title-main">Autoblock</span> Rope device used in climbing and caving

An autoblock is a rope device used in climbing and caving for both rappelling (downward) and ascending (upward).

<span class="mw-page-title-main">Pit cave</span> Cave with significant vertical passages

A pit cave, shaft cave or vertical cave—or often simply called a pit and pothole or pot ; jama in Slavic languages scientific and colloquial vocabulary —is a type of cave which contains one or more significant vertical shafts rather than being predominantly a conventional horizontal cave passage. Pits typically form in limestone as a result of long-term erosion by water. They can be open to the surface or found deep within horizontal caves. Among cavers, a pit is a vertical drop of any depth that cannot be negotiated safely without the use of ropes or ladders.

<span class="mw-page-title-main">Grigri</span> Assisted braking belay device

A Grigri is an assisted braking belay device manufactured by Petzl designed to help secure rock-climbing, rappelling, and rope-acrobatic activities. Its main characteristic is a clutch that assists in braking under a shock load. The success of this device has led to grigri becoming a common name for devices of this type. In 2011 a new version, the Grigri 2, was released to replace the original 1991 model. Petzl released the Grigri+ in 2017, adding safety features to the original design, and 2019 saw the release of an updated version of the device, simply called the Grigri. It is named for the African amulet gris-gris, believed to protect the wearer from evil.

<span class="mw-page-title-main">Belay device</span> Mechanical piece of climbing equipment

A belay device is a mechanical piece of climbing equipment used to control a rope during belaying. It is designed to improve belay safety for the climber by allowing the belayer to manage their duties with minimal physical effort. With the right belay device, a small, weak climber can easily arrest the fall of a much heavier partner. Belay devices act as a friction brake, so that when a climber falls with any slack in the rope, the fall is brought to a stop.

<span class="mw-page-title-main">Petzl Croll</span> Device used in rock climbing

A Petzl Croll is an ascending device used in caving and industrial rope access made by the French company Petzl. Its name comes from the town Crolles where Petzl's company headquarters are located but might also be a reference to the nearby cave system of the Dent de Crolles, the exploration of which triggered a lot of technical effort leading to innovation in caving equipment.

<span class="mw-page-title-main">Dent de Crolles</span> Mountain in France

The Dent de Crolles is a karstic mountain of the Chartreuse Mountains range, 17 kilometres north east of Grenoble, Isère, France. It has a characteristic "tooth-like" profile and is easily recognizable in the Isère Valley (Grésivaudan) in the Grenoble area. The French word "dent" means tooth and "de Crolles" is derived from the town of Crolles, located next to the mountain.

<span class="mw-page-title-main">Petzl Stop</span>

A Petzl Stop is a descender used primarily in caving and formerly used for industrial rope access made by the French company Petzl.

<span class="mw-page-title-main">Caving equipment</span> Equipment for caving and spelunking

Caving equipment is equipment used by cavers and speleologists to aid and protect them while exploring caves. The term may also be used to refer to equipment used to document caves, such as photographic and surveying equipment. Originally, cave diving equipment was quite limited, but the increasing popularity of caving during the 20th century led to the creation of specialist caving equipment and companies.

References