Smith & Wesson Model 500 | |
---|---|
Type | Revolver |
Place of origin | United States |
Production history | |
Designed | 2002–2003 |
Manufacturer | Smith & Wesson |
Produced | 2003–present |
Variants | See Variants |
Specifications | |
Mass | 56 oz (1.59 kg) to 79.6 oz (2.26 kg) [1] |
Barrel length |
|
Cartridge | .500 S&W Magnum, .500 S&W Special |
Action | Double/Single Action |
Muzzle velocity | Approx. 2,075 ft/sec (~632 m/s) |
Effective firing range | 165 ft (~50 m) |
Maximum firing range | 330 ft (~100 m) |
Feed system | 5-round cylinder |
Sights | Iron sights, night sights |
The Smith & Wesson Model 500 is a five-shot, double/single action large-caliber revolver produced by Smith & Wesson, firing the .500 S&W Magnum cartridge.
The Model 500 was built on the entirely new X-Frame, [2] which was developed exclusively to handle the immense muzzle velocity and pressures generated by firing of the .500 Magnum cartridge. [3] It is among the most powerful revolvers in the world since its original release in 2003, and is marketed as "the world's most powerful handgun" by the manufacturer. [4]
The Model 500 can fire a bullet weighing 350 gr (22.7 g; 0.8 oz) at 1,975 feet per second (602 m/s) generating a muzzle energy of over 3,030 foot-pounds force (4.1 kJ), roughly twice that of the .50 AE Desert Eagle, and a momentum of 13.7 Newton seconds. Commercial loadings are available in bullet weights ranging from 275 gr to 700 gr. [5] The Model 500 is capable of firing the shorter .500 S&W Special cartridge.
Instead of a traditional barrel, the S&W 500 uses a rifled tube inside a barrel shroud that is secured by tension from the front. This tensioning leads to stability, making barrels less expensive to produce and resulting in a more accurate revolver. [4]
Lockup is accomplished by a center-pin in the rear of the cylinder and a ball detent in the frame. [4] [6]
The advanced design of the firearm helps in counteracting the recoil felt by the shooter. This includes the sheer weight of the firearm, including a full-length underlug contributing to a forward balance; use of rubber grips; and the use of a compensator. The compensator offers modest recoil reduction, but also increases muzzle blast. [7] On certain S&W Performance Center models the compensator is replaced with a muzzle brake. [4]
Like most large caliber handguns, the Model 500 is suitable for sport and hunting applications. Any of the available bullet weights can be relied on to take game at a range in excess of 200 yards (183 m), a feat matched by only a handful of other handguns. [8] The high energy of these rounds makes it possible to hunt extremely large African game successfully. [9]
Other variants are available through the Smith & Wesson's Performance Center. Like all Smith & Wesson revolvers, "custom" variants are available on special production runs with a minimum order of 500 units. An example is the John Ross Performance Center 5″ .500 S&W Magnum, which features a 5-inch barrel with an external muzzle nut instead of a muzzle brake or compensator and a Millet dovetail front sight. [10]
The .38 Special, also commonly known as .38 S&W Special, .38 Smith & Wesson Special, .38 Spl, .38 Spc, or 9×29mmR is a rimmed, centerfire cartridge designed by Smith & Wesson.
Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.
The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.
The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.
The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.
The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.
The Smith & Wesson Model 27 is a six-shot, double-action revolver chambered for the .357 Magnum cartridge and manufactured by the United States company Smith & Wesson. It was first produced in 1935, and many versions of it are still in production today. The Model 27 was built on S&W's carbon steel, large N-frame, had adjustable sights, and was available at various times with 31⁄2", 4", 5", 6", 61⁄2", 83⁄8", 83⁄4", or 105⁄8" barrel lengths.
The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.
The .460 S&W Magnum round is a powerful revolver cartridge designed for long-range handgun hunting in the Smith & Wesson Model 460 revolver.
The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.
The Super Redhawk is a line of double-action magnum revolvers made by Sturm, Ruger beginning in 1987, when Ruger started making weapons using larger, more powerful cartridges such as .44 Magnum, .454 Casull, and .480 Ruger.
A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.
S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame". Depending upon caliber, the cylinder holds either 5, 6, 7, or 8 cartridges. Centennials feature a fully enclosed (internal) hammer, which makes them Double Action Only (DAO) firearms. Like all other "J-frame" Smith & Wesson revolvers, they have a swing-out cylinder. Centennial models have been made in different versions like PD "Personal Defense", LS "Lady Smith", and M&P "Military & Police"
The Smith & Wesson Model 60 revolver is a 5-shot revolver that is chambered in either .38 Special or .357 Magnum calibers. It was the first revolver produced from stainless steel.
Dan Wesson Firearms (DW), part of CZ-USA, is an American handgun manufacturer. The corporate headquarters, customer service and manufacturing plant is located in Norwich, New York. Dan Wesson Firearms is known for its revolver expertise and for some types of ammunition it has introduced over the years.
The Smith & Wesson Model 640 revolver is a 5-shot snubnosed revolver that is chambered in either .38 Special or .357 Magnum caliber introduced in 1989. Like other "J-frame" Smith & Wesson revolvers, it has a swing-out cylinder, but this model features a concealed hammer, and is part of the Centennial line.
The Smith & Wesson Model 57 is a large frame, double-action revolver with a six round cylinder, chambered for the .41 Magnum cartridge, and designed and manufactured by the Smith & Wesson firearms company. The gun was designed as a weapon for law enforcement agencies. However, due to size and recoil it found more favor with civilian target shooters and hunters.
Smith & Wesson Model 460 is a large bore five-shot, single-action/double-action revolver by Smith & Wesson chambered for the .460 S&W Magnum cartridge. It was designed as a hunting and dangerous game defensive revolver for use in Africa and Alaska. The revolver is built on the company's largest and strongest frame, known as the X-Frame, and represents a joint effort among Smith & Wesson, Hornady, and Cor-Bon.
The .500 S&W Magnum or 12.7×41mmSR is a .50 caliber semi-rimmed revolver cartridge developed by Cor-Bon in partnership with the Smith & Wesson "X-Gun" engineering team for use in the Smith & Wesson Model 500 X-frame revolver and introduced in February 2003 at the SHOT Show. From its inception, it was intended to be the most powerful handgun cartridge to date, with the capacity to harvest all North American game species. While more powerful handgun cartridges, such as the .500 Bushwhacker, have emerged since, they are only available in custom firearms, and the .500 S&W remains the most powerful production handgun cartridge.
The Smith & Wesson Governor is a snub-nosed single-action/double-action revolver built on the Z-frame and utilizes a K-frame grip with a lightweight scandium alloy or stainless steel frame.