Users
China : Indigenous copies chambered for .32 S&W Long [8]
| Smith & Wesson Military & Police Model of 1905 | |
|---|---|
| Type | Revolver |
| Place of origin | United States |
| Service history | |
| In service | 1905 - Present |
| Production history | |
| Designed | 1905 |
| Manufacturer | Smith & Wesson |
| Produced | 1905 - 1942 |
| No. built | 937,000+ |
| Specifications | |
| Mass | 28 oz. (6.5" bbl) |
| Length | 8.75" (4" bbl), 11.25" (6.5" bbl) |
| Width | 1.4375" (1 7/16") - cylinder |
| Height | 4.75" |
| Cartridge | .38 Special |
| Caliber | .357 in (9.1 mm) |
| Barrels | 2", 4", 5", 6", or 6.5" |
| Action | Double action |
| Feed system | Six-round fluted cylinder |
| Sights | Fixed or adjustable |
The .38 Smith & Wesson Model Military & Police Model of 1905 is the third of Smith & Wesson's .38 Hand Ejector models. [1] Later models in this series include the .38 Military & Police Victory Model [2] and the S&W Model 10. [3] The Model 1905, as with the other .38 Hand Ejector models, is a six-shot revolver built on the Smith and Wesson K frame, with a swing-out cylinder chambered in .38 Special. [4] At various times throughout its production, it was offered with a round or square butt grip frame; checkered walnut or hard rubber grip stocks; with or without a lanyard ring on the butt; blue, nickel, or chrome (produced in very small quantities) finish; and a barrel length of 2", 4", 5", 6", or 6.5". [5] This model had a "five screw" frame, with four screws holding the side plate and one screw at the front of the trigger guard. [6]
Four minor design changes were made during the production run of the Model 1905, with two, the 1st and 2nd changes, overlapping in manufacture. Additionally, at approximately serial number 316648, the factory began heat treating cylinders. [7]
.38 Military & Police Model of 1905 - 10,800 manufactured c. 1905 - 1906
.38 Military & Police Model of 1905 1st and 2nd change - 73,648 manufactured c. 1906 - 1909
.38 Military & Police Model of 1905 3rd change - 94,803 manufactured c. 1909 - 1915
.38 Military & Police Model of 1905 4th Change - 758,296 manufactured c. 1915 - 1942
China : Indigenous copies chambered for .32 S&W Long [8]
Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.
The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.
The Colt Cobra is a lightweight, aluminum-framed, double-action short-barrelled revolver, not to be confused with the Colt King Cobra. The Cobra was chambered in .38 Special, .38 Colt New Police, .32 Colt New Police, and .22 Long Rifle. It holds six shots of ammunition and was sold by Colt from 1950 until 1981. In December 2016, it was announced that Colt would be producing a new run of the Colt Cobra with a steel frame and a fiber optic front sight. This model was released in early 2017.
The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.
The Smith & Wesson Model 10, previously known as the Smith & Wesson .38 Hand Ejector Model of 1899, the Smith & Wesson Military & Police or the Smith & Wesson Victory Model, is a K-frame revolver of worldwide popularity. In production since 1899, the Model 10 is a six-shot, .38 Special, double-action revolver with fixed sights. Over its long production run it has been available with barrel lengths of 2 in (51 mm), 3 in (76 mm), 4 in (100 mm), 5 in (130 mm), and 6 in (150 mm). Barrels of 2.5 inches (64 mm) are also known to have been made for special contracts. Some 6,000,000 of the type have been produced over the years, making it the most-produced handgun of the 20th century.
The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.
The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.
The M1917 Revolvers were six-shot, .45 ACP, large frame revolvers adopted by the United States Military in 1917, to supplement the standard M1911 pistol during World War I. There were two variations of the M1917, one made by Colt and the other by Smith & Wesson. They used moon-clips to hold the cartridges in position, facilitate reloading, and to aid in extraction since revolvers had been designed to eject rimmed cartridges and .45 ACP rounds were rimless for use with the magazine-fed M1911. After World War I, they gained a strong following among civilian shooters. A commercial rimmed cartridge, the .45 Auto Rim, was also developed, so M1917 revolvers could eject cartridge cases without using moon-clips.
In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or similar space.
The Smith & Wesson Model 15, initially the Smith & Wesson K-38 Combat Masterpiece, is a six-shot double-action revolver with adjustable open sights produced by Smith & Wesson on the medium-size "K" frame. It is chambered for the .38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. It is essentially a shorter barrel version of the Smith & Wesson Model 14 and an adjustable-sight version of the seminal Smith & Wesson Model 10 with target shooting features.
The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.
A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.
The Colt Detective Special is a six-shot, carbon steel framed, 2-inch (5.1 cm) or 3-inch (7.6 cm) barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.
The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.
The Smith & Wesson Model 64Military and Police revolver is the stainless steel version of the Model 10.
S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame". Depending upon caliber, the cylinder holds either 5, 6, 7, or 8 cartridges. Centennials feature a fully enclosed (internal) hammer, which makes them Double Action Only (DAO) firearms. Like all other "J-frame" Smith & Wesson revolvers, they have a swing-out cylinder. Centennial models have been made in different versions like PD "Personal Defense", LS "Lady Smith", and M&P "Military & Police"
Smith & Wesson Model 460 is a large bore five-shot, single-action/double-action revolver by Smith & Wesson chambered for the .460 S&W Magnum cartridge. It was designed as a hunting and dangerous game defensive revolver for use in Africa and Alaska. The revolver is built on the company's largest and strongest frame, known as the X-Frame, and represents a joint effort among Smith & Wesson, Hornady, and Cor-Bon.
The Ruger Security-Six and its variants, the Service-Six and Speed-Six are a product line of double-action revolvers introduced in 1972 and manufactured until 1988 by Sturm, Ruger & Co. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.
The Smith & Wesson Safety Hammerless or Smith & Wesson New Departure is a double-action revolver that was produced from 1887 to 1940 by Smith & Wesson. Based on the Smith & Wesson Model 2 double-action design, the revolver incorporated an internal hammer and an external grip safety on its back-strap. It was chambered in .32 S&W and .38 S&W calibers; these revolvers were discontinued prior to World War II, being eclipsed by the stronger hand ejector models.
The Smith & Wesson Model 2, also referred to as the Smith & Wesson .38 Single Action, was a .38 caliber revolver produced in both single and double action by Smith & Wesson. The manufacturer's first of that caliber, its 5-shot cyclinder was chambered in .38 S&W. The single-action was produced in three varieties from 1876 through 1911, with total production exceeding 223,000 units; the double-action in three variants from 1880 to 1913, with total sales somewhat under one-million guns.