Smith & Wesson Model 2

Last updated
Smith & Wesson Model 2 (Single Action)
Smith & Wesson .38 Single Action 2nd Model.jpg
Smith & Wesson .38 Single-Action, Second Model
Type Revolver
Place of originUnited States
Service history
Used byUnited States
Production history
Manufacturer Smith & Wesson
Produced1876-1911
No. builtapprox. 25,548 (1st model), 108,255 (2nd model), 97,000 (3rd model)
Specifications
Caliber .38 S&W Blackpowder
Action Single action
Feed system5-round cylinder
SightsFixed

The Smith & Wesson Model 2, also referred to as the Smith & Wesson .38 Single Action, was a .38 caliber revolver produced in both single and double action by Smith & Wesson. The manufacturer's first of that caliber, its 5-shot cyclinder was chambered in .38 S&W. The single-action was produced in three varieties from 1876 through 1911, with total production exceeding 223,000 units; the double-action in three variants from 1880 to 1913, with total sales somewhat under one-million guns.

Contents

The Model 2 fired a black powder cartridge. It was a "top-break" weapon, with the barrel release catch located on the top of the frame, just in front of the hammer. [1] It was a larger caliber version of the third model of the Smith & Wesson Model 1 1/2.

Single Action

In 1876, Smith & Wesson Model 2 debuted in a single-action format, meaning the hammer had to be cocked manually to set the trigger in order to fire the revolver. These revolvers fired black powder cartridges, and were available in nickel or blued finishes.

1st Model

The first model of the .38 Single Action can be identified by its smooth barrel (lacking fluting), and the long extractor shroud similar to the Smith & Wesson Model 3 Russian pistol, which lent it the nickname "Baby Russian". It had a spur trigger and lacked a trigger guard. Models were available in blued or nickel-plated finishes, and the majority were produced with 3+12-inch or 4-inch barrels, although barrels as long as 7 inches were sold. [1]

Serial numbers range from 1 through to 25,548 between 1876 and 1877. This pistol was used by the Baltimore Police Department from 1876 to 1917 and such revolvers are marked "City of Balto". [1]

2nd Model

The second model of the 38 Single Action used a shorter and more efficient ejection and extraction system and lack the shroud of the 1st model. It was produced in blued steel and nickel-plated versions, with most models having a 3+12-inch or 4+12-inch barrel. Rare versions had barrels of 6, 8 and 10 inches in length. [1]

These revolvers had a spur trigger, lacked a trigger guard and were serial numbered consecutively from 1 through 108,255. [2] at least one second model was produced with a 5 in barrel , with last three numbers of sn "007".

3rd Model

The third model of the 38 Single Action was made from 1891 to 1911 and is often known as the 1891 Model, Model 01 or the Model of 91 as the latter is stamped on the top of the barrel. This version used a standard trigger and a trigger guard, but 2000 of these revolvers were made for the Mexican government with the spur trigger and no guard and are referred to as the "Mexican Model". [3]

Double Action

Smith & Wesson Model 2 (Double Action)
Flingues-p1030085.jpg
The middle revolver to the left is a Model 2 (Double Action 38) revolver.
Type Revolver
Place of originUnited States
Production history
Manufacturer Smith & Wesson
Produced1880-1913
No. builtapprox. 328,645 (32 S&W), 554,000 (38 S&W) 59,400 (Perfected Model)
Specifications
Caliber .32 S&W, .38 S&W Blackpowder
Action Double Action
Feed system5-round cylinder
SightsFixed

In 1880, Smith & Wesson offered the Model 2 in a double-action format, whereby a single squeeze of the trigger both cocked the hammer and fired the weapon. These black powder revolvers are easily recognizable by their fully enclosed trigger guard. The first such revolvers made by Smith & Wesson.[ clarify ] The double-action Model 2 was available in nickel or blued finishes and a smaller version was offered in .32 Smith & Wesson.

Double Action 32

The Model 2 in .32 S&W was made in 5 iterations. The initial version was a batch of 30 revolvers that were the first of such made by Smith & Wesson with a trigger guard in 1880. These models were deemed to be sub-par and did not leave the factory until 1888. The second version was improved and a total of 22,142 of these were manufactured until 1882. The third variant made from 1882 until 1885 included 22,232 revolvers. The fourth version was made from 1885 until 1909 and included 239,600 models. The final fifth variant included 44,641 pieces and was discontinued in 1919. [1]

Double Action 38

The Model 2 in .38 S&W was made in 5 iterations. The initial run consisted of 4000 revolvers in 1880. The second version was improved and a total of 115,000 of these were manufactured from 1880 until 1884. The third variant made from 1884 until 1895 included 203,700 revolvers. The fourth version was made from 1895 until 1909 and included 216,300 models. The fifth variant included 15,000 pieces and was discontinued in 1911. The third and fourth versions saw use as a police revolver for the cities of Cleveland, Ohio, Boston Massachusetts and Baltimore, Maryland as well as for security guards at the American Express Company. [1]

The final version of these top-break double-action 38's was the Perfected Model. This version used a top break with a sideplate thumb latch and was made from 1909 until 1920 for a total of 59,400 revolvers. This model was used by Floyd Allen in a courthouse escape attempt in 1913. [1]

Smith & Wesson Safety Hammerless

The Smith & Wesson Safety Hammerless is a double-action revolver that was produced from 1887 to 1940 by Smith & Wesson. Based on the Model 2 double-action design, the revolver incorporated an internal hammer and an external grip safety on its back-strap. It was chambered in .32 S&W and .38 S&W calibers. These revolvers were discontinued prior to World War II, as they had been eclipsed by the superior technology of the hand-ejector models. [1]

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.

<span class="mw-page-title-main">Smith & Wesson</span> American manufacturer of firearms and ammunition

Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.

<span class="mw-page-title-main">Colt Single Action Army</span> Service revolver

The Colt Single Action Army is a single-action revolver handgun. It was designed for the U.S. government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company and was adopted as the standard-issued pistol of the U.S. Army from 1873 to 1892.

<span class="mw-page-title-main">Smith & Wesson Model 29</span> Revolver

The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.

<span class="mw-page-title-main">Ethan Allen (armsmaker)</span> American Arms maker

Ethan Allen was a major American arms maker from Massachusetts. He is unrelated to the revolutionary Ethan Allen. His first firearm, the "Pocket rifle" was developed in 1836, and his first patent was granted in 1837.

<span class="mw-page-title-main">Smith & Wesson Model 19</span> Revolver

The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.

<span class="mw-page-title-main">Smith & Wesson Model 10</span> Service revolver

The Smith & Wesson Model 10, previously known as the Smith & Wesson .38 Hand Ejector Model of 1899, the Smith & Wesson Military & Police or the Smith & Wesson Victory Model, is a K-frame revolver of worldwide popularity. In production since 1899, the Model 10 is a six-shot, .38 Special, double-action revolver with fixed sights. Over its long production run it has been available with barrel lengths of 2 in (51 mm), 3 in (76 mm), 4 in (100 mm), 5 in (130 mm), and 6 in (150 mm). Barrels of 2.5 inches (64 mm) are also known to have been made for special contracts. Some 6,000,000 of the type have been produced over the years, making it the most-produced handgun of the 20th century.

<span class="mw-page-title-main">Harrington & Richardson</span> Firearms brand

Harrington & Richardson Arms Company is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

<span class="mw-page-title-main">Pocket pistol</span> Term for a small, pocket-sized semi-automatic pistol

In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.

<span class="mw-page-title-main">Smith & Wesson Model 15</span> Revolver

The Smith & Wesson Model 15, initially the Smith & Wesson K-38 Combat Masterpiece, is a six-shot double-action revolver with adjustable open sights produced by Smith & Wesson on the medium-size "K" frame. It is chambered for the .38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. It is essentially a shorter barrel version of the Smith & Wesson Model 14 and an adjustable-sight version of the seminal Smith & Wesson Model 10 with target shooting features.

<span class="mw-page-title-main">Smith & Wesson Model 17</span> Revolver

The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.

<span class="mw-page-title-main">Smith & Wesson Model 39</span> Semi-automatic pistol

The Smith & Wesson Model 39 is a semi-automatic pistol developed for the United States Army service pistol trials of 1954. After the Army abandoned its search for a new pistol, the Model 39 went on the civilian market in 1955 and was the first of Smith & Wesson's first generation semi-automatic pistols.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Colt Detective Special</span> Revolver

The Colt Detective Special is a six-shot, carbon steel framed, 2-inch (5.1 cm) or 3-inch (7.6 cm) barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">Smith & Wesson Model 1</span> Revolver

The Smith & Wesson Model 1 was the first firearm manufactured by Smith & Wesson, with production spanning the years 1857 through 1882. It was the first commercially successful revolver to use rimfire cartridges instead of loose powder, musket ball, and percussion caps. It is a single-action, tip-up revolver holding seven .22 Short black powder cartridges.

<span class="mw-page-title-main">Colt Official Police</span> Revolver

The Colt Official Police is a medium frame, double-action revolver with a six-round cylinder, primarily chambered for the .38 Special cartridge, and manufactured by the Colt's Manufacturing Company. Released in 1908 as the Colt Army Special, the revolver was renamed the "Colt's Official Police" in 1927 in order to better market to law enforcement agencies. It became one of the bestselling police firearms of all time, eventually coming to exemplify typical law enforcement officer weaponry in the 1950s. The Official Police was also used by various U.S. and allied military forces during World War II.

<span class="mw-page-title-main">Colt New Service</span> Revolver

The Colt New Service is a large frame, large caliber, double-action revolver made by Colt from 1898 until 1941. Made in various calibers, the .45 Colt version with a 5½" barrel, was adopted by the U.S. Armed Forces as the Model 1909.

<span class="mw-page-title-main">Merwin & Hulbert</span> American firearms designer and marketer

Merwin, Hulbert, and Co. or Merwin Hulbert was an American firearms designer and marketer based in New York City which produced revolvers and rifles from 1874 to 1896. The firearms were manufactured by a subsidiary company, Hopkins & Allen of Norwich, Connecticut. Merwin Hulbert's designs had influenced other gunmakers of the time, such as Meriden Firearms Co., Harrington & Richardson, Forehand & Wadsworth, and Iver Johnson.

<span class="mw-page-title-main">Smith & Wesson Model 1 1/2</span> Revolver

The Smith & Wesson Model 1+12 was Smith & Wesson's second .32 caliber revolver, intended to combine the small size and convenience of the .22 caliber Model 1 with the larger caliber of the 6-shot "belt sized" Model 2, which was introduced in 1861. Chambered in .32 Rimfire, its cylinder held 5 shots. It was produced in three varieties from 1865 through 1892, with total production exceeding 223,000.

References

  1. 1 2 3 4 5 6 7 8 Supica, Jim; Nahas, Richard (3 January 2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. pp. 77–84. ISBN   978-0-89689-293-4.[ permanent dead link ]
  2. Chicoine, David (2005). Antique Firearms Assembly/Disassembly: The Comprehensive Guide to Pistols, Rifles & Shotguns. Iola, Wisconsin: Krause Publications. p. 203. ISBN   0-87349-767-8.[ permanent dead link ]
  3. Ramage, Ken (23 September 2008). The Gun Digest Buyers' Guide to Guns. Iola, Wisconsin: Krause Publications. p. 815. ISBN   978-1-4402-2433-1.[ permanent dead link ]