Smith & Wesson Model 30

Last updated
Smith & Wesson Model 30
Type Revolver
Place of originUnited States
Production history
Manufacturer Smith & Wesson
Produced1903–1976
Specifications
Length
  • 8 inches (200 mm) with 4 in (100 mm) barrel
Barrel  length
  • 2 inches (51 mm)
  • 3 inches (76 mm)
  • 4 inches (100 mm)
  • 6 inches (150 mm)

Cartridge
Action Double-action
Feed systemSix round cylinder
Sightsfixed

The Smith & Wesson Model 30 is a small-frame, six-shot, double-action revolver chambered for the .32 Long cartridge. It was based on the Smith & Wesson Hand Ejector Model of 1903, and could be had with either a blued or nickel finish. It was a "round butt" I-frame and was produced from 1948 to 1960 and was replaced by the J-frame Model 30–1, which remained in production until 1976. [1]

Contents

History

From 1948 to 1957, this model was known as the "Model .32 Hand Ejector" and was built on the 5-screw I-Frame. In 1958 the frame was redesigned to use four screws and a coiled mainspring as opposed to a flat or leaf spring and called the "Improved I-Frame". Three years later in 1961, the "I-Frame" was discontinued and the slightly longer 3-screw "J-Frame" replaced it. [1]

Variants

A square-butt version first known as the "Model .32 Regulation Police" was made during the same time period as the "Model .32 Hand Ejector" and was eventually replaced by the Model 31 in 1958. The Model 31 followed the same path as the Model 30 with regard to production dates. [1]

Related Research Articles

<span class="mw-page-title-main">Smith & Wesson</span> American manufacturer of firearms and ammunition

Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Springfield, Massachusetts, United States.

<span class="mw-page-title-main">Smith & Wesson Model 29</span> Revolver

The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.

<span class="mw-page-title-main">Colt Cobra</span> Revolver

The Colt Cobra is a lightweight, aluminum-framed, double-action short-barrelled revolver, not to be confused with the Colt King Cobra. The Cobra was chambered in .38 Special, .38 Colt New Police, .32 Colt New Police, and .22 LR. It holds six shots of ammunition and was sold by Colt from 1950 until 1981. In December 2016, it was announced that Colt would be producing a new run of the Colt Cobra with a steel frame and a fiber optic front sight. This model was released in early 2017.

<span class="mw-page-title-main">Smith & Wesson Model 19</span> Revolver

The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.

<span class="mw-page-title-main">Smith & Wesson Model 10</span> Service revolver

The Smith & Wesson Model 10, previously known as the Smith & Wesson .38 Hand Ejector Model of 1899, the Smith & Wesson Military & Police or the Smith & Wesson Victory Model, is a K-frame revolver of worldwide popularity. In production since 1899, the Model 10 is a six-shot, .38 Special, double-action revolver with fixed sights. Over its long production run it has been available with barrel lengths of 2 in (51 mm), 3 in (76 mm), 4 in (100 mm), 5 in (130 mm), and 6 in (150 mm). Barrels of 2.5 inches (64 mm) are also known to have been made for special contracts. Some 6,000,000 of the type have been produced over the years, making it the most produced handgun of the 20th century.

<span class="mw-page-title-main">M1917 Revolver</span> Revolver

The M1917 Revolvers were six-shot, .45 ACP, large frame revolvers adopted by the United States Military in 1917, to supplement the standard M1911 pistol during World War I. There were two variations of the M1917, one made by Colt and the other by Smith & Wesson. They used moon-clips to hold the cartridges in position, facilitate reloading, and to aid in extraction since revolvers had been designed to eject rimmed cartridges and .45 ACP rounds were rimless for use with the magazine-fed M1911. After World War I, they gained a strong following among civilian shooters. A commercial rimmed cartridge, the .45 Auto Rim, was also developed, so M1917 revolvers could eject cartridge cases without using moon-clips.

<span class="mw-page-title-main">Smith & Wesson Triple Lock</span> Revolver

The Triple Lock, officially the Smith & Wesson .44 Hand Ejector 1st Model New Century, is a double-action revolver. It was and is considered by many, including handgun enthusiast and expert Elmer Keith, to be the finest revolver ever made.

<span class="mw-page-title-main">Smith & Wesson Model 12</span> Revolver

The Smith & Wesson (S&W) Model 12 is a .38 Special revolver on Smith & Wesson's medium-sized K-frame. It is an aluminium alloy-frame version of the Model 10. It was made from 1953 to 1986 in both two-inch (50.8 mm), 17 ounces (582g) and four-inch (101.6 mm), 19 ounces (539g) configurations. Early models used an aluminum cylinder as well as frame.

<span class="mw-page-title-main">Smith & Wesson Model 15</span> Revolver

The Smith & Wesson K-38 Combat Masterpiece, Revolver Model 15 is a six-shot double-action revolver, with adjustable open sights, built on the medium-size "K" frame. It is chambered for the .38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. Originally known as the "K-38 Combat Masterpiece", it was renamed the Model 15 in 1957 when all Smith & Wesson revolvers were given numerical model numbers. It is a shorter barrel version of the Smith & Wesson Model 14 Target Masterpiece and essentially an adjustable-sight version of the seminal Smith & Wesson Model 10 revolver with target shooting features. The main production run of the Model 15 was from 1949 to 1999. It was discontinued for approximately a decade until 2011, when a re-tooled version was re-released under S&W's Classics Revolvers line.

<span class="mw-page-title-main">Smith & Wesson Model 17</span> Revolver

The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.

<span class="mw-page-title-main">Smith & Wesson Ladysmith</span> Revolver or pistol

The S&W Ladysmith is a series of handguns manufactured by Smith & Wesson starting early in the first decade of the 20th century. Early models, branded were chambered in .22 Long. Starting in the 1980s, under the slightly modified "LadySmith" moniker, S&W manufactured several short-barreled revolvers and semi-automatic pistols.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Colt Detective Special</span> Revolver

The Colt Detective Special is a six-shot, carbon steel framed, 2-inch (5.1 cm) or 3-inch (7.6 cm) barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.

<span class="mw-page-title-main">Smith & Wesson Model 13</span> US Revolver

The Smith & Wesson Model 13 is a .357 Magnum revolver designed for military and police use. It is based on Smith & Wesson's K-frame—specifically, it is a .357 Magnum version of the heavy-barrel variant of the .38 Special Model 10.

The .38 Smith & Wesson Model Military & Police Model of 1905 is the third of Smith & Wesson's .38 Hand Ejector models. Later models in this series include the .38 Military & Police Victory Model and the S&W Model 10. The Model 1905, as with the other .38 Hand Ejector models, is a six-shot revolver built on the Smith and Wesson K frame, with a swing-out cylinder chambered in .38 Special. At various times throughout its production, it was offered with a round or square butt grip frame; checkered walnut or hard rubber grip stocks; with or without a lanyard ring on the butt; blue, nickel, or chrome finish; and a barrel length of 2", 4", 5", 6", or 6.5". This model had a "five screw" frame, with four screws holding the side plate and one screw at the front of the trigger guard.

The Smith & Wesson Model 317 Kit Gun is the current version of over 60 years of the company's 'kit gun' line. The current version is a light, versatile, eight-shot, double-action revolver chambered for the .22 Long Rifle cartridge, manufactured by Smith & Wesson. Due to its low weight, it can be carried for hiking or camping and used for recreational shooting, while still providing an emergency back-up in case of danger.

<span class="mw-page-title-main">Smith & Wesson Safety Hammerless</span> Revolver

The Smith & Wesson Safety Hammerless or Smith & Wesson New Departure is a double-action revolver that was produced from 1887 to 1940 by Smith & Wesson. Based on the Smith & Wesson Model 2 double-action design, the revolver incorporated an internal hammer and an external grip safety on its back-strap. It was chambered in .32 S&W and .38 S&W calibers; these revolvers were discontinued prior to World War II, being eclipsed by the stronger hand ejector models.

<span class="mw-page-title-main">Smith & Wesson Model 1 1/2</span> Revolver

The Smith & Wesson Model 1+12 was Smith & Wesson's second .32 caliber revolver, intended to combine the small size and convenience of the .22 caliber Model 1 with the larger caliber of the 6-shot "belt sized" Model 2, which was introduced in 1861. Chambered in .32 Rimfire, its cylinder held 5 shots. It was produced in three varieties from 1865 through 1892, with total production exceeding 223,000.

<span class="mw-page-title-main">Smith & Wesson Model No. 2 Army</span> Revolver

The Smith & Wesson Model No. 2 Army a.k.a. Model No. 2 Old Model Smith & Wesson Revolver was Smith & Wesson's first .32 caliber revolver, intended to combine the small size and convenience of the Smith & Wesson Model 1 .22 rimfire with a larger caliber. Chambered in the .32 rimfire long caliber, its cylinder held 6 shots. It was manufactured 1861 - 1874, with a total production of 77,020.

<span class="mw-page-title-main">Smith & Wesson Model 34 Kit Gun</span> Revolver, Kit gun

The Smith & Wesson Model 34 Kit Gun is a small, 6-shot, .22 Long Rifle, double-action revolver made by Smith & Wesson. It came with a 4-inch barrel and has adjustable-sights. It was designed to be easily packed in a hunting or fishing "kit" for small game hunting, plinking, pest control and self defense.

References

  1. 1 2 3 Supica, Jim; Richard Nahas (2007). Standard Catalog of Smith & Wesson (3 ed.). Iola, Wisconsin: F+W Media, Inc. pp. 204–205. ISBN   978-0-89689-293-4.