Smith & Wesson Model 619 & 620

Last updated
Smith & Wesson Model 619 & 620
Type Revolver
Place of originUnited States
Production history
Manufacturer Smith & Wesson
Specifications
Mass37.9 ounces (1,070 g)
Length9+12 inches (240 mm)
Barrel  length4 inches (100 mm)

Cartridge .357 Magnum, .38 Special
Action Double action
Feed system7-round cylinder
Sights
  • Fixed rear sights (619)
  • Adjustable rear open sights (620)

The Smith & Wesson models 619 and 620 are seven-shot revolvers introduced by the Smith & Wesson company in 2005. The 619 has fixed rear sights while the 620 comes with adjustable rear sights and a different handgrip.

These revolvers are often mistaken for members of the 686 family. [1] In actuality, they are descendants of the model 65 and model 66. The 65 and 66 models were discontinued, and the 619 and 620 filled their place as the next generation. They were updated to current Smith & Wesson standards with the addition of a key-lock safety as well as seven-round cylinders. The K-Frame of the 65 and 66 was replaced with the newer, reinforced L-Frame. [1]

620 vs 686P

Smith & Wesson model 620 (top) compared to model 686P (bottom) Smith & wesson 629 vs 686.jpg
Smith & Wesson model 620 (top) compared to model 686P (bottom)

These handguns share many common traits but are easily distinguished by key differences. Both models are based on the Smith & Wesson L-Frame and are available in 4" barrels with 7 shot capacity. The 686 features a full-underlug barrel made of one piece whereas the 620 sports a half-lug and two piece barrel. [2] The 620 weighs in at 37.9oz, slightly lighter than the 686's 38oz. The lighter model also shaves 1/8" off of the 686's 958" overall length. [3]

Related Research Articles

Smith & Wesson Model 500 Revolver

The Smith & Wesson Model 500 is a five-shot, double/single action large-caliber revolver produced by Smith & Wesson, firing the .500 S&W Magnum cartridge.

Smith & Wesson Model 19 Revolver

The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.

Smith & Wesson Model 586 Revolver

The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.

Smith & Wesson Model 686 Revolver

The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.

Smith & Wesson Model 625 Revolver

The Smith & Wesson Model 625, is a six-round, double-action revolver chambered for the .45 ACP using moon clips. The Model 625 is an improved stainless steel version Smith & Wesson Model 22 and a direct descendant of the Smith & Wesson M1917 revolver first issued during World War I.

Smith & Wesson Model 15 Revolver

The Smith & Wesson K-38 Combat Masterpiece, Revolver Model 15 is a six-shot double-action revolver, with adjustable open sights, built on the medium-size "K" frame. It is chambered for the .38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. Originally known as the "K-38 Combat Masterpiece", it was renamed the Model 15 in 1957 when all Smith & Wesson revolvers were given numerical model numbers. It is a shorter barrel version of the Smith & Wesson Model 14 Target Masterpiece and essentially an adjustable-sight version of the seminal Smith & Wesson Model 10 revolver with target shooting features. The main production run of the Model 15 was from 1949 to 1999. It was discontinued for approximately a decade until 2011, when a re-tooled version was re-released under S&W's Classics Revolvers line.

Smith & Wesson Model 27 Revolver

The Smith & WessonModel 27 is the original .357 Magnum revolver. It was first produced in 1935, and many versions of it are still in production today. The Model 27 was built on Smith & Wesson's carbon steel, large N-frame, and was available at various times with 312", 4", 5", 6" or 838" barrel lengths and had adjustable sights.

Smith & Wesson Model 17 Revolver

The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.

Snubnosed revolver

A snubnosed revolver is any small, medium, or large frame revolver with a short barrel, which is generally 3 inches or less in length. Smaller revolvers are often made with "bobbed" or "shrouded" hammers, and there are even "hammerless" models, all allowing the gun to be drawn quickly with little risk of it snagging on clothing. The shrouded and hammerless models may even be fired through a coat or jacket pocket. The design of these revolvers sacrifices power and range for maneuverability and concealment.

Colt Detective Special Revolver

The Colt Detective Special is a six-shot, carbon steel framed, 2" or 3" barreled, double-action revolver, and the first example of a class of firearms known as "snubnose revolvers". Made by Colt's Manufacturing Company, this model revolver, as the name "Detective Special" suggests, was intended to be a concealed weapon used by plainclothes police detectives.

Smith & Wesson Centennial Revolver

S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame". Depending upon caliber, the cylinder holds either 5, 6, 7, or 8, cartridges. Centennials feature a fully enclosed (internal) hammer, which makes them Double Action Only (DAO) firearms. Like all other "J-frame" Smith & Wesson revolvers, they have a swing-out cylinder. Centennial models have been made in different versions like PD "Personal Defense", LS "Lady Smith", and M&P "Military & Police"

Handgun Short-barreled firearm designed to be held and used with one hand

A handgun is a short-barrelled firearm that can be held and used with one hand. The two most common handgun sub-types in use today are revolvers and semi-automatic pistols, although other handgun-types such as derringers and machine pistols also see infrequent usage.

Smith & Wesson Model 60 Service revolver

The Smith & Wesson Model 60 revolver is a 5-shot revolver that is chambered in either .38 Special or .357 Magnum calibers. It was the first revolver produced from stainless steel.

Smith & Wesson Model 36 Revolver

The Smith & Wesson Model 36 is a revolver chambered for .38 Special. It is one of several models of J-frame revolvers. It was introduced in 1950, and is still in production in the classic blued Model 36 and the stainless steel Model 60.

Smith & Wesson Model 610 Revolver

The Model 610 is a six-shot, double-action revolver chambered for the 10mm Auto cartridge.

Dan Wesson Firearms American handgun manufacturer

Dan Wesson Firearms (DW), part of CZ-USA, is an American handgun manufacturer. The corporate headquarters, customer service and manufacturing plant is located in Norwich, New York. Dan Wesson Firearms is known for its revolver expertise and for some types of ammunition it has introduced over the years.

The Smith & Wesson Model 317 Kit Gun is the current version of over 60 years of the company's 'kit gun' line. The current version is a light, versatile, eight-shot, double-action revolver chambered for the .22 Long Rifle cartridge, manufactured by Smith & Wesson. Due to its low weight, it can be carried for hiking or camping and used for recreational shooting, while still providing an emergency back-up in case of danger.

Smith & Wesson Model 57 Revolver

The Smith & Wesson Model 57 is a large frame, double-action revolver with a six round cylinder, chambered for the .41 Magnum cartridge, and designed and manufactured by the Smith & Wesson firearms company. The gun was designed as a weapon for law enforcement agencies. However, due to size and recoil it found more favor with civilian target shooters and hunters.

Smith & Wesson Model 14 Revolver

The Smith & Wesson Model K-38 Target Masterpiece Revolver Model 14 is a six-shot, double-action revolver with adjustable open sights built on the medium-size "K" frame. It is chambered for the .38 Special cartridge, and most were fitted with a 6 in (150 mm) or 8+38 in (210 mm) barrel. A small batch were made with 4 in (100 mm) barrels, and even fewer were made with 5 in (130 mm) barrels. First produced in 1947 and originally known as the K-38 Target Masterpiece, it was renamed the Model 14 in 1957 when all Smith & Wesson revolvers were given numerical model numbers. It is built on the same medium-sized frame (K-frame) as the seminal Smith & Wesson Model 10 revolver. The K-38 model was authorized for duty with the Los Angeles Police Department in the 1960s and early 1970s.

Smith & Wesson Model 34 Kit Gun Revolver, Kit gun

The Smith & Wesson Model 34 Kit Gun is a small, 6-shot, .22 Long Rifle, double-action revolver made by Smith & Wesson. It came with a 4-inch barrel and has adjustable-sights. It was designed to be easily packed in a hunting or fishing "kit" for small game hunting, plinking, pest control and self defense.

References

  1. 1 2 Supica, Jim; Nahas, Richard (2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. p. 252. ISBN   0-89689-293-X.
  2. Quinn, Jeff (August 29, 2005). "Smith & Wesson Models 619 and 620 .357 Magnum Revolvers". Gunblast.com.
  3. Scarlata, Paul (2005). "S&W's Seven-Shot Medium-Frame Revolvers". Shooting Times . Archived from the original on 2009-06-05.