Steam mill

Last updated
A type of steam mill in Yaroslavl, Russia, with a body of water and a high chimney Type of steam mill. Yaroslavl.jpg
A type of steam mill in Yaroslavl, Russia, with a body of water and a high chimney
Steam engine that used to be a part of a steam mill. Zaslawye, Belarus Dvigatel'.JPG
Steam engine that used to be a part of a steam mill. Zaslawye, Belarus

A steam mill is a type of grinding mill using a stationary steam engine to power its mechanism.

Related Research Articles

Society for Establishing Useful Manufactures

The Society for Establishing Useful Manufactures (S.U.M.) or Society for the Establishment of Useful Manufactures was a private state-sponsored corporation founded in 1791 to promote industrial development along the Passaic River in New Jersey in the United States. The company's management of the Great Falls of the Passaic River as a powersource for grist mills resulted in the growth of Paterson as one of the first industrial centers in the United States. Under the society's long-term management of the falls, the industrialization of the area passed through three great waves, centered first on cotton, then steel, and finally silk, over the course of over 150 years. The venture is considered by historians to have been a forerunner for many public–private partnerships in later decades in the United States.

Bale Grist Mill State Historic Park United States historic place

Bale Grist Mill State Historic Park is a California state park located in Napa County between St. Helena and Calistoga. The park is the site of a water-powered grist mill that was built in 1846 is one of only two water-driven mills remaining west of the Mississippi River.

Line shaft Rotating shaft historically used for power transmission

A line shaft is a power-driven rotating shaft for power transmission that was used extensively from the Industrial Revolution until the early 20th century. Prior to the widespread use of electric motors small enough to be connected directly to each piece of machinery, line shafting was used to distribute power from a large central power source to machinery throughout a workshop or an industrial complex. The central power source could be a water wheel, turbine, windmill, animal power or a steam engine. Power was distributed from the shaft to the machinery by a system of belts, pulleys and gears known as millwork.

Peotone Mill United States historic place

The Peotone Mill, formerly known as the Rathje Mill, is located in the village of Peotone, Illinois, which is in Will County, Illinois, United States. The mill was donated to the Village of Peotone in the early 1980s. The building is listed on the National Register of Historic Places as well as the Will County Register of Historic Places.

Rock Run Township, Stephenson County, Illinois Township in Illinois, United States

Rock Run Township is located in Stephenson County, Illinois. As of the 2010 census, its population was 2,247 and it contained 969 housing units. The villages of Rock City and Davis are located in the township.

Metamora, Indiana Census-designated place in Indiana, United States

Metamora is an unincorporated town and census-designated place in Metamora Township, Franklin County, Indiana. The town was once a stop along the Whitewater Canal and is now primarily dependent on tourism. As of the 2010 census, it had a population of 188.

Collamer, Indiana Place in Indiana, United States

Collamer is an unincorporated community in Cleveland Township, Whitley County, Indiana, United States, located on the Eel River and at the intersection of Indiana State Road 14 and Whitley County road 900 W. Smith Rambo platted the town February 9, 1846. Collamer is named after Jacob Collamer, 13th United States Postmaster General.

Monroe City is a small unincorporated community in the historic Bluff Precinct of Monroe County, Illinois, United States. As of 2016, the population is approximately 45 people, living in 23 homes. The community is generally considered to comprise the platted towns of Monroe City (1856), Woodville (1857), and the area immediately adjacent to those towns. The core community is located in a valley, or colloquial "hollow," commonly known as the Monroe City Hollow. The central natural feature of the Hollow is the all-season Monroe City Creek. Governmental functions are provided by Monroe County. Electric utilities are provided by the Monroe County Electric Cooperative and public water is offered by the Fountain Water District.

John Bryan State Park Park in Ohio, USA

John Bryan State Park is a 752-acre (304 ha) Ohio state park in Greene County, Ohio. The park surrounds Clifton Gorge, a deep cut of the Little Miami River between Yellow Springs and Clifton. The park contains a campground, and hiking and biking trails. The park also abuts the Clifton Gorge State Nature Preserve and Glen Helen Nature Preserve.

Balmoral Grist Mill Museum History museum in Balmoral Mills, Nova Scotia.

The Balmoral Grist Mill Museum is a restored 1874 water-powered grist mill located in Balmoral Mills, Nova Scotia. The site includes a 1 kilometre (0.62 mi) walking trail along the ravine of Balmoral Brook. The mill is part of the Nova Scotia Museum system. It could be used to grind wheat, oats, and buckwheat into flour and meal.

Kaese Mill United States historic place

Kaese Mill is a historic grist mill located at Accident, Garrett County, Maryland, United States. It was constructed about 1868, and is a 2+12-story frame water-powered grist mill. It is the only fully operational water-powered grist mill in Maryland. It was built by Henry August Kaese, Sr., an immigrant miller from Germany who settled in Garrett County shortly after the American Civil War.

Wye Mill United States historic place

The Wye Mill is the oldest continuously operated grist mill in the United States, located at Wye Mills, Queen Anne's County and Talbot County, Maryland, United States. It is the earliest industrial site on the Eastern Shore in continuous use; dating to the late 17th century. It is a wood-frame, water-powered grist mill, with a 19th-century 26 HP 10-foot-diameter (3.0 m) Fitz steel overshot wheel. The mill retains nearly all of its late-18th-century equipment. The Wye Mill was one of the first grist mills to be automated with the Oliver Evans process, which is still in use today.

Griffins Mills is a hamlet in the town of Aurora in Erie County, New York, United States. It lies on the West Branch of Cazenovia Creek in the area once known as West Aurora. Griffins Mills was founded in the early 19th century at the site of a mill. It is located in zip code 14170.

Aurora Steam Grist Mill United States historic place

Aurora Steam Grist Mill was a historic grist mill located in Aurora, Cayuga County, New York. It was a monolithic, 3+12-story rectangular stone structure built on the shore of Lake Cayuga. It was one of the first mills built west of the Hudson River to be powered by steam. In 1974, the building's roof collapsed due to neglect and plans were to restore it for use as a community center. It was largely intact until 1992, when Wells College began to demolish it in order to build a dock behind the Aurora Inn.

Pine Creek Gristmill United States historic place

Pine Creek Gristmill is a historic building located in Wildcat Den State Park in Muscatine County, Iowa, United States. The building was listed on the National Register of Historic Places in 1979.

Sugartit is a rural community in Boone County, Kentucky, United States. It was located at the intersection of U.S. Route 42 and Kentucky Route 237 between the cities of Florence and Union. Sugartit has been noted for its unusual place name.

Steele Creek (Mohawk River tributary)

Steele Creek is a river in Herkimer County in the state of New York. The creek begins in an unnamed swamp south of Cedarville, and flows in a northeast direction before emptying into the Mohawk River in the village of Ilion. Steele Creek travels through the Ilion Gorge and alongside NY-51 for most of its length. Steele Creek derives its name from Rudolph Stahl, who built the first grist mill in Ilion along the creek.

Taylorsville Milling Company Roller Mill United States historic place

The Taylorsville Milling Company Roller Mill is a historic manufacturing facility located in Taylorsville, North Carolina. It is one of the few surviving early 20th-century grain-processing facilities in the United States.

Jeffrey, Kentucky Unincorporated community in Kentucky, United States

Jeffrey is an unincorporated community located near Peters Creek on Bethlehem Church Road, eight miles (13 km) northwest of Tompkinsville, Monroe County, Kentucky, United States.

References