Zendrum

Last updated
Zendrum LT played by Jonathan Coulton Zendrum Laptop in concert (1246x768).jpg
Zendrum LT played by Jonathan Coulton

A Zendrum is a hand-crafted MIDI controller that is used as a percussion instrument. The Zendrum was influenced by the "Drumitar," invented by Future Man. There are several Zendrum models that are well-suited for live performances: the Z1, ZX, EXP, ZAP series, LT and the Mallet Pro series and Melodic Finger. The Zendrum ZX and Z1 can be worn like a guitar and consists of a triangular hardwood body with 24 touch-sensitive round MIDI triggers. The EXP has 29 triggers and additional controls. The Zendrum LT can also be worn with a guitar strap, and has 25 MIDI triggers in a symmetrical layout, which provides an ambidextrous playing surface. The ZAP series is designed more for table top use or on a drum stand, with the ZAP1 having 19 triggers, and the ZAP2 having 25 triggers. The triggers are played by tapping or slapping with the fingers or hands. As a controller, the Zendrum does not make any sound by itself. It uses an electronic interface called MIDI to control synthesizers, samplers, drum machines, sound modules, computers or other electronic drum devices that generates the musical and percussive sounds. The Mallet Pro Series is laid out and played like a traditional mallet instrument, like a marimba. The Mallet Pro series has naturally resonating solid walnut bars as triggers.

Contents

Playing

Once the Zendrum is hooked up via MIDI to a sound module, and connected to an amplified loudspeaker or headphones, the player can tap or slap the triggers. The triggers on a Zendrum are velocity sensitive, which means that the volume of each note depends on how hard the corresponding trigger is hit. Depending on what it is connected to, and how it is programmed or configured, the signal from the velocity level of the Zendrum's trigger can also be used to alter variances in timbre, panning, and other expressive aspects of the sound. The Zendrum is often used to play drum or percussion instrument parts, but it can also used to perform the sounds from tuned instruments, ranging from steel drums or vibraphone to piano, bass, guitar, or bells. Sustained sounds like organs or string orchestra "patches" can be played, but they require a different technique to control. A sustain pedal can be plugged into a Zendrum to allow the sound to sustain, otherwise, depending on how it is programmed to receive trigger signals, the sound will have a clipped or staccato feel.

The playing styles and techniques that work best on the Zendrum are quite different from those of a traditional acoustic drum. Traditional drumming (especially for a drum kit) requires a certain amount of "limb independence," whereas the Zendrum requires more "finger independence." Also, traditional drumming is more than just triggering sounds; a drummer playing a physical kit gets important feedback in the way his or her sticks bounce and react from the surfaces of the drums and cymbals. Depending on the technology and style of the MIDI drum kit, a player has varying levels of feedback similar to a traditional drum kit. The Zendrum (with the exception of the Mallet pro series) requires a playing technique similar to tapping one's fingers on a table, except that the Zendrum triggers are sensitive to velocity. The majority of the Zendrum models are designed to be worn like a guitar, allowing the player to stand up and walk around using either wired or wireless MIDI connections. Where a traditional drum kit can is typically played with 2 hands and 2 feet, the Zendrum can be triggered with all ten fingers and the palms of both hands much like a conga or other hand percussion instrument.

History

Drumitar -- modified from a SynthAxe previously owned by jazz musician Lee Ritenour Drumtar.jpg
Drumitar modified from a SynthAxe previously owned by jazz musician Lee Ritenour

MIDI sound generators have long been able to make realistic drum sounds, but the traditional keyboard of a synthesizer is not always well suited to playing percussion. MIDI triggers can be retrofitted onto the traditional drum kit to allow drummers to play synthesizer or sampled drum sounds (or other sounds) using their regular drum kit. In most live settings, drummers and percussionists are situated in the back of the stage, and limited in their movement. Futureman (a.k.a. Roy-El, a.k.a. Roy Wooten), the percussionist for Béla Fleck and the Flecktones, uses a Synthaxe Drumitar to trigger drum sounds on several MIDI sound modules, which allows him to move around on the stage. Inspired by Futureman's Drumitar in 1991, David Haney created his interpretation of a portable electronic drum trigger by using a triangular piece of wood and piezoelectric sensors as triggers. With friend, fellow drummer and co-inventor Kim Daniel, they refined the shape of the instrument. Originally, the first Zendrum used a 24 cable snake to trigger drum sound modules (one cable for each trigger), but then they upgraded it to MIDI in 1993 after a meeting with Peter Gabriel and Manu Katché. David and Kim patented their design in 1994. Starting in 1995, David Haney and Kim Daniel began a series of experiments with Futureman and engineer Chris deHaas to expand on the Zendrum idea and technology. In 2008, the Zendrum ZAP (Zendrum Articulated Programmer) was released. It is a smaller Zendrum with a hexagonal layout designed for studio and 'desktop' use. The Mallet Pro series and Melodic Finger controllers were added to the Zendrum family of instruments in late 2013 to early 2014.

See also

Related Research Articles

<span class="mw-page-title-main">Drum kit</span> Musical instrument

A drum kit is a collection of drums, cymbals, and sometimes other auxiliary percussion instruments set up to be played by one person. The drummer typically holds a pair of matching drumsticks or special wire or nylon brushes; and uses their feet to operate hi-hat and bass drum pedals.

<span class="mw-page-title-main">Drum machine</span> Electronic musical instrument that creates percussion sounds

A drum machine is an electronic musical instrument that creates percussion sounds, drum beats, and patterns. Drum machines may imitate drum kits or other percussion instruments, or produce unique sounds, such as synthesized electronic tones. A drum machine often has pre-programmed beats and patterns for popular genres and styles, such as pop music, rock music, and dance music. Most modern drum machines made in the 2010s and 2020s also allow users to program their own rhythms and beats. Drum machines may create sounds using analog synthesis or play prerecorded samples.

General MIDI is a standardized specification for electronic musical instruments that respond to MIDI messages. GM was developed by the American MIDI Manufacturers Association (MMA) and the Japan MIDI Standards Committee (JMSC) and first published in 1991. The official specification is available in English from the MMA, bound together with the MIDI 1.0 specification, and in Japanese from the Association of Musical Electronic Industry (AMEI).

<span class="mw-page-title-main">Ableton Live</span> Digital audio workstation

Ableton Live, also known as Live or sometimes colloquially as "Ableton", is a digital audio workstation for macOS and Windows developed by the German company Ableton.

Keytar is a keyboard instrument similar to a synthesizer or MIDI controller that is supported by a strap around the neck and shoulders, similar to the way a guitar is held.

<span class="mw-page-title-main">SynthAxe</span> Electronic music instrument that emulates the layout of a guitar

The SynthAxe is a fretted, guitar-like MIDI controller, created by Bill Aitken, Mike Dixon, and Tony Sedivy and manufactured in England in 1985. It is a musical instrument that uses electronic synthesizers to produce sound and is controlled through the use of an arm resembling the neck of a guitar in form and in use. Its name comes from the words synthesizer and axe, a slang term meaning guitar. The system was developed as a joint venture funded by Richard Branson's Virgin Group.

<span class="mw-page-title-main">MIDI controller</span> Device that produces MIDI data

A MIDI controller is any hardware or software that generates and transmits Musical Instrument Digital Interface (MIDI) data to MIDI-enabled devices, typically to trigger sounds and control parameters of an electronic music performance. They most often use a musical keyboard to send data about the pitch of notes to play, although a MIDI controller may trigger lighting and other effects. A wind controller has a sensor that converts breath pressure to volume information and lip pressure to control pitch. Controllers for percussion and stringed instruments exist, as well as specialized and experimental devices. Some MIDI controllers are used in association with specific digital audio workstation software. The original MIDI specification has been extended to include a greater range of control features.

<span class="mw-page-title-main">Electronic drum</span> Musical instrument

Electronic drums are a modern electronic musical instrument, primarily designed to serve as an alternative to an acoustic drum kit. Electronic drums consist of an electronic sound module which produces the synthesized or sampled percussion sounds and a set of pads, usually constructed in a shape to resemble drums and cymbals, which are equipped with electronic sensors to send an electronic signal to the sound module which outputs a sound. Like acoustic drums, the pads are struck by drum sticks and they are played in a similar manner to an acoustic drum kit, albeit with some differences in the drumming experience.

<span class="mw-page-title-main">Sound module</span> Externally controlled electronic musical instrument

A sound module is an electronic musical instrument without a human-playable interface such as a piano-style musical keyboard. Sound modules have to be operated using an externally connected device, which is often a MIDI controller, of which the most common type is the musical keyboard. Another common way of controlling a sound module is through a sequencer, which is computer hardware or software designed to record and playback control information for sound-generating hardware. Connections between sound modules, controllers, and sequencers are generally made with MIDI, which is a standardized interface designed for this purpose.

<span class="mw-page-title-main">Bass pedals</span> Foot-operated musical instrument

Bass pedals are an electronic musical instrument with a foot-operated pedal keyboard with a range of one or more octaves. The earliest bass pedals from the 1970s consisted of a pedalboard and analog synthesizer tone generation circuitry packaged together as a unit. The bass pedals are plugged into a bass amplifier or PA system so that their sound can be heard. Since the 1990s, bass pedals are usually MIDI controllers, which have to be connected to a MIDI-compatible computer, electronic synthesizer keyboard, or synth module to produce musical tones. Some 2010s-era bass pedals have both an onboard synth module and a MIDI output.

The DTX range consists of electronic drum kits and percussion controllers manufactured by the Yamaha Corporation. They currently cover levels from entry-level to pro-range. DTX kits use sampling for their sounds, meaning each kit has built-in digital recordings of real drums, and cymbals. When the drum or cymbal pads are hit, the digital recordings are played back to replicate what is being played. On all kits, the sounds are editable – the pitch can be made higher or lower (tuned) and many other features. The higher the range of the DTX, the more functions there are editable.

<span class="mw-page-title-main">Wind controller</span> Electronic wind instrument

A wind controller, sometimes referred to as a wind synthesizer, is an electronic wind instrument. It is usually a MIDI controller associated with one or more music synthesizers. Wind controllers are most commonly played and fingered like a woodwind instrument, usually the saxophone, with the next most common being brass fingering, particularly the trumpet. Models have been produced that play and finger like other acoustic instruments such as the recorder or the tin whistle. The most common form of wind controller uses electronic sensors to convert fingering, breath pressure, bite pressure, finger pressure, and other gesture or action information into control signals that affect musical sounds. The control signals or MIDI messages generated by the wind controller are used to control internal or external devices such as analog synthesizers or MIDI-compatible synthesizers, synth modules, softsynths, sequencers, or even non-instruments such as lighting systems.

Roland GS, or just GS, sometimes expanded as General Standard or General Sound, is a MIDI specification. It requires that all GS-compatible equipment must meet a certain set of features and it documents interpretations of some MIDI commands and bytes sequences, thus defining instrument tones, controllers for sound effects, etc.

The MalletKAT is a musical instrument in a class of MIDI percussion controllers which also includes the DrumKAT, DK10, and TrapKat.

<span class="mw-page-title-main">Simmons (electronic drum company)</span>

Simmons is an electronic drum brand, which originally was a pioneering British manufacturer of electronic drums. Founded in 1978 by Dave Simmons, it supplied electronic kits from 1980 to 1998. The drums' distinctive, electronic sound can be found on countless albums from the 1980s. The company closed in 1999 and the Simmons name is currently owned by Guitar Center.

<span class="mw-page-title-main">Guitar synthesizer</span> Electronic system to modify guitar sound

A guitar synthesizer is any one of a number of musical instrument systems that allow a guitarist to access synthesizer capabilities.

<span class="mw-page-title-main">Electronic drum module</span>

An electronic drum module is an electronic or digital music device in an electronic drum kit that serves as the central processing unit and sound module. The drum module creates or produces the drum kit sounds or other sounds selected by the drummer. By itself, a drum module cannot play or sound drum beats. It only produces drum sounds when a performer strikes electronic drum pads or acoustic drum kit instruments that have electronic "triggers" attached to them. When the electronic drum pads or trigger-equipped instruments are struck, this sends a signal to the drum module, which produces the corresponding electronic drum sound. Even when drum pads and/or triggers are connected to a drum module, the drum module by itself does not make any audible sound. Like other electronic instruments such as the synthesizer, the drum module only outputs an electronic signal. The performer can hear this signal by connecting headphones to the drum module or by plugging the drum module into an amplifier and loudspeaker or PA system for audible practice or live performances. The drum module's output signal can also be patched into an audio console for concerts or sound recording. The nomenclature varies. For example, electronic drum modules are called "percussion sound modules" in the case of Roland Corporation, or sometimes simply modules. A common colloquial term for this device is drum brain..

<span class="mw-page-title-main">Grip (percussion)</span> Percussion playing technique

In percussion, grip refers to the manner in which the player holds the sticks or mallets, whether drum sticks or other mallets.

<span class="mw-page-title-main">Digital accordion</span> Musical instrument

A digital accordion is an electronic musical instrument that uses the control features of a traditional accordion to trigger a digital sound module that produces synthesized or digitally sampled accordion sounds or, in most instruments, a range of non-accordion sounds, such as orchestral instruments, pipe organ, piano, guitar, and so on. Digital accordions typically encode and transmit key presses and other input as Musical Instrument Digital Interface (MIDI) messages. Most digital accordions need to be plugged into a keyboard amplifier or PA system to hear their sounds.

The Roland DDR-30 "Alpha Drum" is a digital PCM drum module built by Roland, in early 1985. It was introduced during 1985 Summer NAMM industry trade show in New Orleans.

References

    General references