Design overview
The Cadillac Commercial Chassis is a variant of the GM D-body specifically developed for professional car use; most applications included funeral coaches (hearses), ambulances, and combination cars. In contrast to the Cadillac 75 (a factory-built limousine), the Commercial Chassis was designed with a heavier-duty frame; to improve access to the rear cargo area, the rear frame rails were positioned lower than a standard D-body.
Produced by Cadillac as an "incomplete vehicle", the rolling chassis was fitted with no bodywork aft of the dashboard. While fitted with all road controls and front body trim (and air conditioning, if specified), all bodywork from the dashboard rearward was completed by coachbuilders using the chassis as a basis for a completed vehicle; to aid body fabrication, front door shells and rear quarter panels were shipped to the coachbuilders (separate from the chassis).
Before World War II, the Commercial Chassis used the longest wheelbase of any GM sedan-based vehicle, ranging up to 165 inches in 1940. During the 1950s and 1960s, the chassis used a 156-inch wheelbase, with the 1971-1976 chassis reaching a 157.5-inch length. The powertrain was shared with the Series 75 through its entire production.
Discontinuation
In the early 1970s, federal design regulations forced a shift of the donor chassis from commercial car chassis to cutaway van chassis (and light trucks). Along with wider and taller interiors, design requirements for ambulance bodies effectively forced a change from a wagon-type body to a modular box. While construction of funeral coaches remained unaffected, a low demand for new vehicles coincided with their long service life.
For 1977, Cadillac downsized its full-size sedan lines, including the D-body chassis; the Series 75 became offered solely as a limousine; the Commercial Chassis followed suit in downsizing. The professional car industry underwent a period of struggle, as multiple firms either closed their doors or were reorganized (such as Superior, Miller-Meteor and Hess & Eisenhardt). The final ambulances of the D-body Commercial Chassis were built in 1979.
Following the discontinuation of the Cadillac Commercial chassis, the construction of coachbuilt professional cars has remained the same; a rolling chassis is bodied aft of the dashboard. On an official basis, Cadillac has produced "incomplete"-bodied versions of several of its unibody-chassis product lines, including the DeVille, DTS, XTS, and CT6. Additionally, the Cadillac Escalade ESV (based on the Chevrolet Suburban) is used for funeral-coach applications. With the closure of the Oshawa assembly plant and subsequent demise of the Cadillac XTS platform, Cadillac is using the XT5 and XT6 SUV chassis for hearses, starting in 2020.
A hearse is a large vehicle, originally a horse carriage but later with the introduction of motor vehicles, a car, used to carry the body of a deceased person in a coffin at a funeral, wake, or memorial service. They range from deliberately anonymous vehicles to heavily decorated vehicles.
The Austin Princess is a series of large luxury cars that were made by Austin and its subsidiary Vanden Plas from 1947 to 1968. The cars were also marketed under the Princess and Vanden Plas marque names.
The Lincoln Town Car is a model line of full-size luxury sedans that was marketed by the Lincoln division of the American automaker Ford Motor Company. Deriving its name from a limousine body style, Lincoln marketed the Town Car from 1981 to 2011, with the nameplate previously serving as the flagship trim of the Lincoln Continental. Produced across three generations for thirty model years, the Town Car was marketed directly against luxury sedans from Cadillac and Chrysler.
The GM D platform, was a General Motors automobile platform designation, used in two series for large body-on-frame rear-wheel drive automobiles. For the majority of its existence the D-Body represented the largest Cadillac, either the Fleetwood Series 75 or the Fleetwood Limousine.
The Wayne Corporation was an American manufacturer of buses and other vehicles under the "Wayne" marque. The corporate headquarters were in Richmond, Indiana, in Wayne County, Indiana. During the middle 20th century, Wayne served as a leading producer of school buses in North America.
The Cadillac DTS is a full-size car that was built by the American company Cadillac from 2005 until May 2011. It is a four-door sedan that comes in five- or six-seat variants. The DTS debuted at the 2005 Chicago Auto Show and was manufactured at GM's Detroit/Hamtramck Assembly factory. It uses GM's G-platform for front-engine, front-wheel-drive automobiles. The DTS was a very mildly revised iteration of the eighth-generation Deville, using the brand's new naming convention, set by the CTS and STS. Writing for the Los Angeles Times, noted reviewer Warren Brown called the DTS "a large, exceptionally comfortable front-wheel-drive luxury sedan." The nameplate DTS is an acronym for DeVille Touring Sedan.
The Cadillac Fleetwood was a full-size luxury sedan that was marketed by Cadillac from the 1976 to 1996 model years. Taking its nameplate from a coachbuilder historically associated with the General Motors division, the Cadillac Fleetwood became a stand-alone model line in 1985.
The Cadillac Series 70 is a full-size V8-powered series of cars that were produced by Cadillac from the 1930s to the 1980s. It replaced the 1935 355E as the company's mainstream car just as the much less expensive Series 60 was introduced. The Series 72 and 67 were similar to the Series 75 but the 72 and 67 were produced on a slightly shorter and longer wheelbase respectively. The Series 72 was only produced in 1940 and the Series 67 was only produced in 1941 and 1942. For much of the postwar era, it was the top-of-the-line Cadillac, and was Cadillac's factory-built limousine offering.
Superior Coach was a coachbuilder in the American automotive industry. Founded in 1909 as the Garford Motor Truck Company, Superior is best known for constructing bodies for professional cars (hearses) and school buses. Following major downturns in both segments in the late 1970s, Superior was liquidated by its parent company in 1980. From 1925 to 1980, the company was based in Lima, Ohio.
A combination car was a vehicle that could serve either as a hearse or as an ambulance, and had the capability of being swapped between those roles without much difficulty. This hybrid usage of the cars reflects an era when funeral homes offered emergency ambulance service in addition to their primary trade, especially in smaller towns and rural areas.
A professional car is loosely defined as a vehicle based on a special long wheelbase commercial chassis and sometimes, though rarely, on modified passenger car chassis, for use as a hearse, flower car, service car, ambulance, limousines or for a combination of purposes. The term is mostly used in the United States.
The Cadillac V8, introduced as the Type 51, is a large, luxurious automobile that was introduced in September 1914 by Cadillac as a 1915 model. It was Cadillac's first V8 automobile, replacing the four-cylinder Model 30, and used the all new GM A platform for the entire series shared with all GM division brands using a 122 in (3,099 mm) wheelbase, while a 145 in (3,683 mm) chassis was offered separately to be used for custom coachwork. The Types 53, 55, 57, 59, and 61 were introduced every year through 1923 with yearly improvements until an all new platform was substantially updated and introduced as the V-63 using the business philosophy called planned obsolescence. It was built at the Cass Street and Amsterdam Avenue factory in Detroit, with the coachwork provided by Fisher Body. The chassis could be purchased separately and sent to the clients choice of coachbuilder optionally.
The Cadillac V-63 is a large luxury automobile that was introduced in September 1923 by Cadillac as a 1924 model, replacing the previous Type 61. It used the GM C platform and was replaced by the Cadillac Series 355 in 1931. It retained the name Cadillac V8 introduced with the previous generation Cadillac Type 51.
The Packard Patrician is an automobile which was built by the Packard Motor Car Company of Detroit, Michigan, from model years 1951 through 1956. During its six years in production, the Patrician was built in Packard's Detroit facilities on East Grand Boulevard. The word "patrician" is Latin for a ruling class in Ancient Rome. It was the last "senior level" Packard until production ended in 1958.
The Cadillac Series 355 was a V8-powered luxury car manufactured by Cadillac from 1931 until 1935. It was offered as a 2-door club coupe, 2-door convertible, 4-door convertible, 4-door sedan, 4-door town car, and 4-door limousine. It provided a range of Cadillac below the maker's larger V-12 and V-16 lines. It was succeeded by the Cadillac Series 70/75.
The Cadillac XTS is a full-size car built by the American company Cadillac from 2013 until 2019. It is a four-door sedan with seating for up to five passengers. Based on an enlarged version of the Epsilon II platform, it has a front-mounted engine that either drives the front wheels or drives all four wheels.
The Volvo PV650 Series is an automobile manufactured by Volvo between 1929 and 1937. The model name stand for PersonVagn, 6 cylinders, 5 seats; the third digit indicates the version.
Daimler DE was a series of chassis made by the Daimler Company from 1946 until 1953. DE chassis were the basis for Daimler's largest and most expensive cars at the time. There were two versions: the short-wheelbase DE 27 with the Daimler Twenty-seven six cylinder engine, and the long-wheelbase DE 36, the last Daimler Straight-Eight, with the Thirty-six straight-eight engine. Daimler DEs, especially the DE 36 Straight-Eight, was sold to royalty and heads of state around the world, including British royalty under the royal warrant that Daimler had held since 1900.
The Dodge Series D8 appeared in October 1937 for the 1938 model year, replacing the previous year's Series D5. Production of the 1938 Dodges ran from September 1937 until July 1938, which was the typical pattern for Dodge in this period. As before, there was also a "Junior" line of Plymouths using Dodge badges and trim for the Canadian and global export markets. The main version is sometimes referred to as the "Senior" Dodge to distinguish the two.
