The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.4 and 2.5 litres. While these engines were based on the GM Family II engine, the architecture was substantially re-engineered for the new Ecotec application produced since 2000. This engine family replaced the GM Family II engine, the GM 122 engine, the Saab H engine, and the Quad 4 engine. It is manufactured in multiple locations, to include Spring Hill Manufacturing, in Spring Hill, Tennessee.
Delta is General Motors' compact front-wheel drive automobile and crossover SUV platform, a successor to the GM T platform; it also replaced GM J platform and the Z platform used by the Saturn S-Series. The platform debuted in the 2003 Saturn Ion. Vehicles of this platform generally carry the letter "A" in the fourth character of their VINs.
Kappa was General Motors' subcompact rear-wheel drive automobile platform for roadster applications. The architecture debuted in the 2006 Pontiac Solstice and 2007 Saturn Sky, and ended production in 2009. These vehicles generally have a "M" in the fourth digit of their VIN.
The General Motors 60° V6 engine family was a series of 60° V6 engines which were produced for both longitudinal and transverse applications. All of these engines are 12-valve cam-in-block or overhead valve engines, except for the LQ1; which uses 24 valves driven by dual overhead cams. These engines vary in displacement between 2.5 and 3.4 litres and have a cast-iron block and either cast-iron or aluminum heads. Production of these engines began in 1980 and ended in 2005 in the U.S., with production continued in China until 2010. This engine family was the basis for the GM High Value engine family. These engines have also been referred to as the X engines due to their first usage in the X-body cars.
The High Value engine family from General Motors is a group of Cam in Block or "Overhead valve" V6 engines. They use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine centerline. These engines are the first cam in block engines to implement Variable valve timing, and won the 2006 Breakthrough Award from Popular Mechanics for this innovation. For the 2007 model year, the 3900 engine features optional displacement on demand or "Active Fuel Management" which deactivates a bank of cylinders under light load to increase highway fuel economy. It was rumored GM would produce a 3-valve design, but that never came to be. These engines were produced primarily at the GM factory in Tonawanda, New York and at the Ramos Arizpe engine plant in Mexico. The assembly line for this engine was manufactured by Hirata Corporation at their powertrain facility in Kumamoto, Japan.
Theta is General Motors' compact or mid-size crossover SUV automobile platform. The architecture debuted in 2002 with the Saturn Vue and was later used for the Chevrolet Equinox and Captiva and similar models.
Magna PT, known until 2018 as GETRAG, is the world's largest supplier of transmission systems for passenger cars and commercial vehicles. The company was founded on 1 May 1935, in Ludwigsburg, Germany, by Hermann Hagenmeyer; as the Getriebe und Zahnradfabrik Hermann Hagenmeyer GmbH & Cie KG.
The engine family known as the Quad 4s was debuted to the public in the spring of 1987. The Quad 4 is a 2,260.5 cc DOHC inline four-cylinder produced by General Motors' Oldsmobile division. The Quad 4 name is derived from the engine's four-valve, four-cylinder layout. The engine was a modern design for its time, using a cast-iron block and an aluminum head. Even though belts were more popular for this purpose on OHC engines at the time, chains were used to time the camshafts to the crankshaft. The water pump is also driven by the timing chain. The Quad 4 was the first wholly domestic regular production DOHC four-cylinder engine designed and built by GM; the only prior DOHC four-cylinder engine offered by GM was the Cosworth Vega, which featured a DOHC head designed by Cosworth in England.
The Daewoo Magnus was a mid-sized sedan developed and manufactured by Daewoo from 2000 to 2006. GM Daewoo and other General Motors divisions, as well as GMDAT stake holder Suzuki, have marketed this car under different badges in various countries. The car is also known under its internal Daewoo designation of V200. The Project Manager was Dr. W.J Lee.
BAS is an acronym for belted alternator starter. It is a category of automotive parallel hybrid technology that uses an electric motor to contribute power to the internal combustion engine's crankshaft via a serpentine belt. By mounting this motor generator unit in the conventional location traditionally used for the standard automotive alternator, it permits a low-cost method of adding mild hybrid capabilities such as start-stop, power assist, and mild levels of regenerative braking. BAS differ from other mild hybrid systems as they are not run off the vehicle's crankshaft.
The 4T80E is a series of automatic transmissions from General Motors. Designed for transverse engine configurations, the series includes 4 forward gears. The 4Txx family is an evolution of the original Turbo-Hydramatic 125 transverse automatic introduced in the 1980 model year "X" body.
The 5L40-E are a series of automatic transmissions made by General Motors. Designed for longitudinal engine configurations, the series includes 5 forward gears and is used in the GM Sigma platform vehicles from Cadillac, the Pontiac Solstice, BMW, and Holden Commodore.
The 4T60-E is a series of automatic transmissions from General Motors. Designed for transverse engine configurations, the series includes 4 forward gears. The 4Txx family is an evolution of the original Turbo-Hydramatic 125 transverse automatic introduced in the late 1970s.
The F23 is a five-speed manual transmission manufactured by Getrag in Italy. It is designed for transverse engine applications, primarily by General Motors. It can handle torque inputs of over 230 newton metres (170 lbf⋅ft).
General Motors and Ford Motor Company cooperated in 2002 to create a new automatic transaxle, designed for transverse engine applications in cars. The companies jointly committed to investing US$720 million in their manufacturing plants to support the new transmission.
The Hydra-Matic 6T40 and similar 6T45, 6T50 and 6T30 are transversely-mounted six speed automatic transmissions produced by General Motors. The 6T40, referred to in GM inner circles as the GF6, made its debut in the 2008 Chevrolet Malibu, available with the 2.4 L LE5Ecotec engine making 164 horsepower (122 kW), and has since also been made available on the Chevrolet Cruze, Daewoo Tosca and Buick LaCrosse. It features clutch-to-clutch shifting, eliminating the bands used on older transmission designs. GM chose an "on-axis" design as opposed to folding the gearset behind the engine and transferring power through the use of a chain, as is used in most other GM front wheel drive transaxles. Ford Motor Company also produces their own variant, called the 6F35. The Buick Encore uses the 6F35 mated to the 1.4 turbo.
Windsor Transmission was a General Motors of Canada parts plant in Windsor, Ontario and one of several facilities in southern Ontario and Canada. It was the only plant located in southwestern Ontario and was located closer to GM headquarters in Detroit than GM Canada headquarters in Oshawa.
The F35 is a Saab-designed five-speed manual transmission built in Saab’s Gothenburg, Sweden, powertrain plant. This extensively tested manual transmission was originally introduced in the 1984 Saab 9000, and was later used in the Saab 900, 9-3 and 9-5, Saturn Ion Redline, Chevrolet Cobalt SS, Chevrolet HHR SS and various GM/Opel transverse engine front-wheel drive applications.
