Gryphon Audio Designs

Last updated

Gryphon Audio Designs is a manufacturer of high-end audio equipment located in Denmark. Gryphon is known for their extremely expensive cost-no-object audio equipment, with few updates and product changes compared to their competition.

Contents

History

Gryphon was started by Flemming E. Rasmussen, after he obtained a degree in graphics arts from the Aarhus Art Academy in Denmark and he had been involved in the local music community as well as employed as a designer for a sportswear company. Mr. Rasmussen first founded 2R Marketing, which was an importer of high end audio products into Denmark, and developed a moving coil preamplifier for record players. After this preamp (which became the "Gryphon Head Amp") was shown at the 1986 Consumer Electronics Show it developed sufficient interest in Japan to justify the formation of a sister company, which has become Gryphon Audio Designs. Gryphon Audio Designs became a formal company in 1985, and gradually the importing of audio components into Denmark by 2R Marketing was phased out until it ceased in 1993.

Mr. Rasmussen owns a collection of master reel to reel tapes from the 1950s and 1960s. These tapes are played on a modified Studer A80 Reel to Reel tape deck to listen to products as they are being designed, in order to achieve a final product with the desired sound.

Gryphon products are designed and built by Gryphon Audio Designs at the factory in Ry, Denmark. Service is accomplished by Gryphon Audio Designs at their facility. To aid in service, the individual circuit boards in each Gryphon product has its own quality control certificate, while the completed unit also has its own quality control certificate. Records of all boards and devices are maintained at Gryphon Audio Designs, and all products are fully traceable.

Characteristics of Gryphon products

Gryphon Antileon Solo Monoblock Amplifier Gryphon Antileon Solo Monoblock.jpg
Gryphon Antileon Solo Monoblock Amplifier

Gryphon products are almost always dual mono, meaning each stereo channel is independent of the other, including separate power supplies and power transformers. Some even have separate power cords.

Gryphon products are almost always black, with black acrylic on the front panel.

Gryphon products typically have a very wide frequency response, much higher than 20 kHz, which is around the threshold of what is heard by humans.

Gryphon amplifiers have always been pure "class A" in circuit design, until the introduction of the Gryphon "Encore" amplifier. Class-A amplifiers set their output transistors to be operated in their most accurate, and most inefficient, range. Gryphon 100-watt-per-channel class-A amplifiers dissipate over 400 watts per channel even with no signal applied to their inputs. Gryphon uses large heat sinks and/or fans in their amplifiers to dissipate this large amount of heat.

Related Research Articles

<span class="mw-page-title-main">Amplifier</span> Electronic device/component that increases the strength of a signal

An amplifier, electronic amplifier or (informally) amp is an electronic device that can increase the power of a signal. It is a two-port electronic circuit that uses electric power from a power supply to increase the amplitude of a signal applied to its input terminals, producing a proportionally greater amplitude signal at its output. The amount of amplification provided by an amplifier is measured by its gain: the ratio of output voltage, current, or power to input. An amplifier is a circuit that has a power gain greater than one.

<span class="mw-page-title-main">High fidelity</span> High-quality reproduction of sound

High fidelity is the high-quality reproduction of sound. It is popular with audiophiles and home audio enthusiasts. Ideally, high-fidelity equipment has inaudible noise and distortion, and a flat frequency response within the human hearing range.

<span class="mw-page-title-main">Audio power amplifier</span> Audio amplifier with power output sufficient to drive a loudspeaker

An audio power amplifier is an electronic amplifier that amplifies low-power electronic audio signals, such as the signal from a radio receiver or an electric guitar pickup, to a level that is high enough for driving loudspeakers or headphones. Audio power amplifiers are found in all manner of sound systems including sound reinforcement, public address, home audio systems and musical instrument amplifiers like guitar amplifiers. It is the final electronic stage in a typical audio playback chain before the signal is sent to the loudspeakers.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker, together with its efficiency, determines the sound power generated.

Nakamichi Corp., Ltd. is a Japanese consumer electronics brand that originated in Japan and gained a name from the 1970s onwards for innovative and high quality audio cassette decks. Nakamichi is a subsidiary of Chinese holding company Nimble Holdings.

<span class="mw-page-title-main">Valve amplifier</span> Type of electronic amplifier

A valve amplifier or tube amplifier is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal. Low to medium power valve amplifiers for frequencies below the microwaves were largely replaced by solid state amplifiers in the 1960s and 1970s. Valve amplifiers can be used for applications such as guitar amplifiers, satellite transponders such as DirecTV and GPS, high quality stereo amplifiers, military applications and very high power radio and UHF television transmitters.

In electrical engineering and mechanical engineering, the power rating of equipment is the highest power input allowed to flow through particular equipment. According to the particular discipline, the term power may refer to electrical or mechanical power. A power rating can also involve average and maximum power, which may vary depending on the kind of equipment and its application.

PS Audio is an American company specializing in high-fidelity audio components equipment for audiophiles and the sound recording industry. It currently produces audio amplifiers, preamplifiers, power related products, digital-to-analog converters, streaming audio, music management software and cables.

<span class="mw-page-title-main">DIY audio</span>

DIY Audio means "do it yourself" audio. Rather than buying a piece of possibly expensive audio equipment, such as a high-end audio amplifier or speaker, the person practicing DIY Audio will make it themselves. Alternatively, a DIYer may take an existing manufactured item of vintage era and update or modify it. The benefits of doing so include the satisfaction of creating something enjoyable, the possibility that the equipment made or updated is of higher quality than commercially available products and the pleasure of creating a custom-made device for which no exact equivalent is marketed. Other motivations for DIY audio can include getting audio components at a lower cost, the entertainment of using the item, and being able to ensure quality of workmanship.

Founded by David Hafler and Ed Laurent in Philadelphia, Pennsylvania in 1955, Dynaco was an American hi-fi audio system manufacturer popular in the 1960s and 1970s for its wide range of affordable, yet high quality audio components.. Its best known product was the ST-70 tube stereo amplifier. They also manufactured other tube and solid state amplifiers, preamplifiers, radio tuners and bookshelf loudspeakers. Dynaco was liquidated in 1980, and the trademark is now owned by Radial Engineering Ltd.

<span class="mw-page-title-main">Class-D amplifier</span> Audio amplifier based on switching

A class-D amplifier or switching amplifier is an electronic amplifier in which the amplifying devices operate as electronic switches, and not as linear gain devices as in other amplifiers. They operate by rapidly switching back and forth between the supply rails, being fed by a modulator using pulse width, pulse density, or related techniques to encode the audio input into a pulse train. The audio passes through a simple low-pass filter into the loudspeaker. The high-frequency pulses are blocked. Since the pairs of output transistors are never conducting at the same time, there is no other path for current flow apart from the low-pass filter/loudspeaker. For this reason, efficiency can exceed 90%.

A valve audio amplifier (UK) or vacuum tube audio amplifier (US) is a valve amplifier used for sound reinforcement, sound recording and reproduction.

Luxman is a brand name of Japanese Luxman Corporation (ラックスマン株式会社), a company that manufactures luxury audio components. Luxman produces a variety of high-end audio products which include turntables, amplifiers, receivers, tape decks, CD players and speakers

Optonica was a subdivision of Japanese electronics manufacturer Sharp that made high-end hi-fi products systems.

<span class="mw-page-title-main">HH Electronics</span>

HH Electronics is a British amplifier manufacturer, that was founded in 1968 by Mike Harrison, Malcolm Green and Graham Lowes in Harston near Cambridge, England, where its first solid state TPA and MA range of studio quality amplifiers were designed and manufactured. These amplifiers were used by many recording and broadcasting studios, including the BBC.

Threshold Audio is a high-end audio equipment manufacturer originally established in California in 1974 by audio engineer Nelson Pass and graphic designer René Besne. The company, today based in Houston Texas, manufactures mono-block and stereo power amplifiers, multi-channel power amplifiers and stereo control amplifiers.

<span class="mw-page-title-main">Naim NAIT</span> Integrated audio amplifier

The Naim NAIT is an integrated amplifier from the British hi-fi manufacturer, Naim Audio. The original NAIT is one of the most recognisable pieces of hi-fi equipment ever made. Hi-fi critic Lucio Cadeddu recognised its legendary status, referring to it as "one of the most controversial and famous integrated amps in the history of HiFi".

<span class="mw-page-title-main">Naim Audio amplification</span>

Naim Audio is a specialist British manufacturer of high-end audio amplifiers well known for their self described qualities of "pace, rhythm and timing".

<span class="mw-page-title-main">NAD 3020</span> Integrated amplifier by NAD electronics

The NAD 3020 is a stereo integrated amplifier by NAD Electronics, considered to be one of the most important components in the history of high fidelity audio. Launched in 1978, this highly affordable product delivered a good quality sound, which acquired a reputation as an audiophile amplifier of exceptional value. By 1998, the NAD 3020 had become the most well known and best-selling audio amplifier in history.

In electronics, power amplifier classes are letter symbols applied to different power amplifier types. The class gives a broad indication of an amplifier's characteristics and performance. The classes are related to the time period that the active amplifier device is passing current, expressed as a fraction of the period of a signal waveform applied to the input. A class A amplifier is conducting through all the period of the signal; Class B only for one-half the input period, class C for much less than half the input period. A Class D amplifier operates its output device in a switching manner; the fraction of the time that the device is conducting is adjusted so a pulse-width modulation output is obtained from the stage.

References