ISM-V Unmagnified reflex sight (4x for DMR variant)
The Heckler & KochXM8 is a lightweight assault rifle system developed from the late 1990s to early 2000s. The rifle was designed by German small arms manufacturer Heckler & Koch (H&K), and shares design and engineering with their G36 rifle.
The XM8 design was originally part of the Objective Individual Combat Weapon program (OICW), which was developing a "smart" grenade launcher system with an underslung carbine rifle. The system was unable to meet performance and weight requirements and was eventually canceled. In the aftermath, the two portions of the OICW were separated, resulting in the XM8 and XM25 projects.
While the XM8 was being considered by the United States Army as a potential standard infantry rifle, to replace the M4 carbine, this project was put on hold in April 2005, and was formally canceled on October 31 of that year. The weapon was adopted by the Royal Malaysian Navy for its PASKAL special forces.
A U.S. Marine Corps weapons instructor presents an XM8 Carbine during the Infantry Operations Chief Symposium in August 2005.
The U.S. Army's purpose in contracting for this prototype weapon was to provide replacement options for the M16 rifle after the XM29 program ran into problems.[clarification needed] The goal was a weapon that was cheaper, lighter, and more effective than the M16 and M4 series of weapons. The XM8 was not just one weapon but a system which could be reconfigured with appropriate parts to be any one of several variants from a short-barreled personal defense weapon to a bipod-equipped support weapon. It also included an integrated optical sight and IR laser aiming module/illuminator.
The XM8 was based on the rifle module of Alliant Techsystems's XM29 OICW project, of which the weapon mechanisms were the responsibility of H&K. Following the indefinite delay of the Objective Individual Combat Weapon program, the U.S. Army requested that the contractors design stand-alone weapons from the XM29's kinetic energy and high explosive modules.
The first 30 XM8 prototypes were delivered by November 2003 for preliminary testing. Later, at least 200 developmental prototypes were procured. Among the complaints during testing was that the battery life was too low for the weapon's powered sight system and some ergonomics issues. Two other key issues were reducing the weapon's weight and increasing the heat resistance of the handguard, which would start to melt after firing too many rounds. The main testing was largely completed, and the army pushed for funding for a large field test. However, in 2004 Congress denied $26 million funding for 7,000 rifles to do a wide scale test fielding of the XM8 in 2005. At that time, the rifle still had developmental goals that were incomplete, primarily associated with the weapon's weight; the battery life had been extended, and a more heat-resistant plastic handguard added. The earliest product brochure lists the target weight for the carbine variant at 2.6kg (5.7lb) with the then current prototype at 2.8kg (6.2lb). The weight of the carbine prototype had since grown to 3.4kg (7.5lb) according to a brochure released by HK and General Dynamics in January 2005.
U.S. Army leaders test fire the compact set-up of the XM8 at Fort Benning, Georgia in August 2004.
During the same period, the Army came under pressure from other arms makers[who?] to open up the XM8 to competition. The main argument was that the weapon that was being adopted was a substantially different system than for the original competition that ATK and H&K had actually won (see XM29). Other issues were that the army has a legislated obligation to prefer U.S.-based manufacturers, and that a previous agreement with Colt Defense required the army to involve Colt in certain small-arms programs. The XM8 program was put on hold in 2004. The exact reason why this happened is a matter of debate; some combination of the aforementioned technical issues, funding restrictions, and outside pressure being involved.
In 2005, the Army issued a formal Request for Proposals (RFP) for the OICW Increment One family of weapons. This RFP gave manufacturers six months to develop and deliver prototype weapons with requirements very similar to the XM8 capabilities, but with the addition of a squad automatic weapon (SAW) configuration. No XM8 prototypes have been shown that actually match the capabilities of the M249 (e.g. fast barrel replacement, high sustained rate of fire, belt feed). The OICW Increment One requirement for the SAW includes fast barrel replacement and high sustained rate of fire, but leaves the ammunition feed choice up to the manufacturer.
Funding for the M320 grenade launcher, a single-shot under-barrel grenade launcher similar to the M203 that was originally intended for the XM8, was approved. The launcher is heavier than the M203, but does offer some advantages, such as no need for special mounting hardware and loading from the side instead of the bottom, which enables use of longer-than-standard grenades.[2] The XM320 was designed for use with the existing inventory of M16s and M4s and is also compatible with the XM8. It can also be used as a stand-alone weapon.
As of July 19, 2005, the OICW Increment One RFP was put on an eight-week hold, with an indication given that the program was being restructured as a joint procurement program. On October 31, 2005, the OICW Increment One RFP was cancelled.
In an article in Jane's Defence Weekly, April 26, 2006 (Vol 43, page 30) it is stated that "The US Army has again delayed the procurement of its future infantry weapons, this time for more than five years, and is working to field two interim guns in the meantime".
General Dynamics was involved in latter stages and H&K had plans to produce the rifle at a plant in Georgia. H&K was British-owned at the start of the project, but was later bought back by a group of German investors. Engineering work was done at facilities in the United States and Germany.
Near cancellation
A prototype XM8 carbine - lacking PCAP device on the side rails. Also has the open 'duckbill' rather than 'birdcage' style flash suppressor
The U.S. military's XM8 program was almost canceled in the autumn of 2005 after being suspended earlier that year, but was limited to the use of Marines. Had this program not been specified, the XM8 system may have faced competition from weapons such as from the FN SCAR, Bushmaster ACR and HK416. It was later altered and entered as a candidate for the SCAR competition but was unsuccessful.[3]
Further testing
In autumn 2007 the XM8 was compared to other firearms in a 'dust test'.[4] The competition was based on two previous tests that were conducted in summer 2006 and summer 2007 before the latest test in the autumn of 2007. In the summer 2007 test, M16 rifles and M4 carbines recorded a total of 307 stoppages. In the autumn 2007 test, the XM8 recorded only 127 stoppages in 60,000 total rounds while the M4 carbine had 882.[4] The FN SCAR had 226 stoppages and the HK416 had 233. The difference between the XM8, HK416, and FN SCAR was not statistically significant when correcting for the less reliable STANAG magazine.[5] However, the discrepancy of 575 stoppages between the summer and autumn 2007 tests of the M4 had officials looking into possible causes for the change such as different officials, seasons, and inadequate sample pool size but have stated that the conditions of the test were ostensibly the same.
Design
XM8 testing; One shooter is kneeling with an XM8 Carbine and a XM320 (a 40 mm grenade launcher) attached, while the other uses the XM8 sharpshooter (designated marksman) variant.An XM8 compact carbine variant with buttcap attached, fired by a U.S. Army weapons tester.
The materials used to build the XM8 are almost entirely composites, with the notable exception of the cold-hammer-forged steel barrel. Preliminary tests in desert and arctic conditions have shown the XM8 to be a rugged weapon, though some complaints arose concerning an unspecified mechanical issue and melting handguards due to overheating when firing full-auto.[6]
Much of the expected cost and weight savings are from the weapon's electronic sight. The baseline XM8 carbine (with its integrated sight), for example, can be compared to an M4 carbine with a host of previous-generation electronic add-ons like the AN/PEQ-2, Aimpoint CompM2, Advanced Combat Optical Gunsight, and/or BUIS. Without the advantage of the next-generation combined electronics sight, the XM8 would be both heavier and more expensive than the firearms it was intended to replace.
Accessories
The XM8 abandoned the standard Picatinny rail for attachment of weapon accessories, in favor of a new standard referred to as PCAP (Picatinny Combat Attachment Points), small oval holes on the forward grip. (A variant was designed with MIL-STD-1913 rails — XM8 R; and some early XM8 prototypes had rails.) PCAP is not backwards compatible with currently fielded attachments that use MIL-STD-1913 rails without using an adapter. The benefit of PCAP, however, is the precision of the accessory's connection with the body of the weapon; accessories utilizing Picatinny rails often need adjustment if they are removed and reattached. Additionally, most standard accessory functionality is built into the XM8. Where functionality was missing, it was anticipated that accessories would be redesigned to utilize PCAP. In the new OICW Increment One competition, the army has left the choice of attachment technology up to the manufacturer, with requirements built into the RFP as to the ability of sights to maintain their zero.
The M4 carbine barrel is 368mm (14.5in) and the XM8 barrel is 317mm (12.5in) but the rifles have the same overall length. Although a shorter barrel generally results in lower muzzle velocity, Polygonal rifling partially compensates for the loss of velocity from a shorter barrel. An electronic round counter was proposed for the XM8. The system would have tracked the number of rounds fired and the date and time of each shot. The data would then be accessed wirelessly by a device like a PDA. Another benefit would be to monitor unauthorized weapon use or corroborate field reports. Other features included completely ambidextrous controls and an integrated red dot/3x optical zoom scope (later changed to a red dot/1x sight). However the designated marksman configuration used a 3.5x magnification scope.
Variants
Navy PASKAL operators on standby during 57th National Day Parade Of Malaysia. Sailor at left holds an XM8.H&K XM8 Carbine attached with H&K AG36 Underbarrel Grenade Launcher of Royal Malaysian Navy's special forces, PASKAL.
For much of its life, four different models were proposed: a compact PDW (personal defense weapon) with a 241mm (9.5in) barrel, a carbine with a 317mm (12.5in) barrel, a sniper and automatic rifle variant, both with 508mm (20in) barrels. In addition a Light machine gun with a 100-round dual drum Beta C-Mag is proposed. Accessories such as optical sights, a grenade launcher, and a bipod were integrated using a new system which allows for precision attachment (so that, for example, scopes do not have to be readjusted each time they are attached). Like the M4 and M16, the XM8 was chambered for the standard 5.56×45mm NATO round and was normally equipped with a 30-round plastic box magazine also used in the G36. Although, this meant that the magazine housing was not compatible with M4 and M16's metal STANAG magazine without using an adaptor. A 100-round dual drum Beta C-Mag style magazine could also be used.
One of the XM8's unique features was its modularity. In addition to attachments mentioned above, this modularity allowed for quick repairs, barrel length changes, and even caliber changes in the field. Along with its basic components, the XM8 would have complemented the XM29, with such features as identical accessory mounts.
The number and type of variants in the family varied over its lifetime, this overview with three main versions is based from a press release in the early 2000s.
Light machine gun: heavy 508mm (20in) barrel with integrated folding bipod, rate of fire from 600-750 rounds/min
Usage
While the XM8 fell out of favor with the U.S. Armed Forces, Heckler & Koch sought to market the rifle globally. In the meantime, the Malaysian Armed Forces expressed interest in using the rifle and by 2007 openly stated its intention to purchase the XM8 rifle. By 2010, the Royal Malaysian Navy special unit PASKAL began using the XM8 along with other Heckler & Koch assault rifles including the HK416 and G36.[9][verification needed]
Heckler & Koch GmbH is a German armaments manufacturing company that manufactures handguns, rifles, submachine guns, and grenade launchers. The company is located in Oberndorf am Neckar in the German state of Baden-Württemberg, and also has subsidiaries in the United Kingdom, France and the United States.
The M4 carbine is a 5.56×45mm NATO, gas-operated, magazine-fed carbine developed in the United States during the 1980s. It is a shortened version of the M16A2 assault rifle.
The XM29 OICW was a series of prototypes of a new type of assault rifle that fired 20 mm HE airbursting projectiles. The prototypes were developed as part of the Objective Individual Combat Weapon program in the 1990s. The term SABR was also used at certain points, but is less common.
The Objective Individual Combat Weapon or OICW was the next-generation service rifle competition that was under development as part of the United States Army OICW program; the program was eventually discontinued without bringing the weapon out of the prototype phase. The acronym OICW is often used to refer to the entire weapons program.
The Colt Canada C7 and C8 are a Canadian family of service rifles, manufactured by Colt Canada, having similar design and function to the Colt M16A3.
Knight's Armament Company (KAC) is an American firearms and firearms parts manufacturer, best known for producing the Rail Interface System (RIS) and the Rail Adapter System (RAS) grips for firearms use. They currently produce a variety of firearms, specifically AR-15 rifles.
The Heckler & KochG36(Gewehr 36) is an assault rifle designed in the early 1990s by German weapons manufacturer Heckler & Koch. It is chambered in 5.56×45mm NATO, and replaced the heavier G3 battle rifle chambered in 7.62×51mm. The G36 was accepted into service with the Bundeswehr in 1997. Since then, it has been a popular export, and has seen active service in military and police units in several countries, including Germany, Spain, Kurdistan Region, and the United Kingdom. The G36 is gas-operated and feeds from a 30-round detachable box magazine or 100-round C-Mag drum magazine.
The Colt Automatic Rifle-15 or CAR-15 is a family of M16 rifle–based firearms marketed by Colt in the 1960s and early 1970s. However, the term "CAR-15" is most commonly associated with the Colt Commando ; these select-fire carbines have ultrashort 10.5-inch (270 mm) and 11.5-inch (290 mm) barrels with over-sized flash suppressors.
The 1913 rail, also known as the Picatinny rail is an American rail integration system designed by Richard Swan that provides a mounting platform for firearm accessories. It forms part of the NATO standard STANAG 2324 rail. It was originally used for mounting of scopes atop the receivers of larger caliber rifles.
The CompM2 is a battery-powered, non-magnifying red dot type of reflex sight for firearms manufactured by Aimpoint AB. It was first introduced in the U.S. Armed Forces in 2000, designated as the M68 Close Combat Optic. It is also known as the M68 Aimpoint and is designed to meet United States military standards. The sight is designed for use with the M16/M4 family of rifles, but can be mounted on any weapon fitted with an upper Picatinny rail. It is also NVG-compatible—the aiming dot is still visible through night vision scopes and goggles. The Army's M68 designation was also applied to a later version of the sight, the Aimpoint CompM4.
The FNSCAR is a family of gas-operated short-stroke gas piston automatic rifles developed by Belgian manufacturer FN Herstal (FN) in 2004. It is constructed with modularity for the United States Special Operations Command (SOCOM) to satisfy the requirements of the SCAR competition. This family of rifles consists of two main types. The SCAR-L, for "light", is chambered in 5.56×45mm NATO and the SCAR-H, for "heavy", is chambered in 7.62×51mm NATO. Both types are available in Close Quarters Combat (CQC), Standard (STD), and Long Barrel (LB) variants.
The XM25 Counter Defilade Target Engagement (CDTE) System, also known as the Punisher and Individual Semiautomatic Air Burst System was an airburst grenade launcher with programmable ammunition derived from the XM29 OICW. It was fielded to soldiers serving in the War in Afghanistan in 2010, after which malfunctions and 2013 program budget cuts delayed official entry into service, planned for early 2017. In early 2017, the contract with Orbital ATK was cancelled, calling the future of the entire program into question. The program was officially terminated on 24 July 2018.
The AG36 is a single-shot 40 mm grenade launcher that operates on the high-low system and was designed primarily for installation on the G36 assault rifle, designed by the German weapons manufacturing company Heckler & Koch of Oberndorf am Neckar. It originally appeared as Heckler & Koch's candidate for the US Army's Enhanced Grenade Launcher requirement, evaluated for use with the XM8 and FN SCAR rifles. As is commonly mistaken, the "A" is not an addition to the name "G36", which is short for Gewehr 36, but is in fact an abbreviation of the German Anbaugranatwerfer, literally meaning "attached grenade launcher" and the 36 coming from the name of the primary weapon it was designed to enhance – the G36. It can also be used dismounted, with a stock attached as a stand-alone model, or a LLM01 laser light module can be attached to it.
M320 Grenade Launcher Module (GLM) is the U.S. military's designation for a new single-shot 40 mm grenade launcher system to replace the M203 for the U.S. Army, while other services initially kept using the older M203. The M320 uses the same High-Low Propulsion System as the M203.
The Heckler & Koch HK416 is an assault rifle chambered for the 5.56×45mm NATO cartridge. It is designed and manufactured by the German company Heckler & Koch.
The two most common assault rifles in the world are the Soviet AK-47 and the American M16. These Cold War-era rifles have been used in conflicts both large and small since the 1960s. They are used by military, police, security forces, revolutionaries, terrorists, criminals and civilians alike and will most likely continue to be used for decades to come. As a result, they have been the subject of countless comparisons and endless debate.
The Barrett REC7 is an American firearm manufactured as a selective-fire fully-automatic and semi-automatic rifle by Barrett Firearms. It is an M4 carbine utilizing a short-stroke gas piston system. REC7 is available in either 5.56×45mm NATO or 6.8mm Remington SPC. The REC7 is Barrett's second AR-pattern rifle chambered for the 6.8mm Remington SPC cartridge, the first being the Barrett M468 rifle. The 6.8 SPC-chambered M468 rifle employed the same direct gas-impingement system as the M4.
The Heckler & Koch HK433 is a modular assault rifle chambered for 5.56×45mm which combines features of the G36 and the HK416 families of assault rifles.
The CAR 816, also called Caracal Sultan or simply Sultan, is a 5.56×45mm NATO, gas-operated, magazine-fed assault rifle that is produced by Caracal International in Abu Dhabi, United Arab Emirates. The rifle is also called Sultan in memory of the Emirati Colonel Sultan Mohammed Ali al-Kitbi who was killed in action in Saudi-led intervention in Yemen.
References
1 2 "XM8". militarytoday.com. Military Today. Archived from the original on 1 August 2023. Retrieved 1 August 2023.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
