The Joint Aviation Requirements (JAR) were a set of common comprehensive and detailed aviation requirement issued by the Joint Aviation Authorities, intended to minimise Type Certification problems on joint ventures, and also to facilitate the export and import of aviation products.
They were recognised by the civil aviation authorities of participating countries as an acceptable basis for showing compliance with their national airworthiness codes.
The European Aviation Safety Agency (EASA) was created in 2003 and reached full functionality in 2008, and has since taken over most of the JAA functions. JAA Certification Specifications, formerly known as JARs, are recognised by EASA as an acceptable basis for showing compliance with their national airworthiness codes.
The Joint Aviation Authorities (JAA) was an associated body of the European Civil Aviation Conference representing the civil aviation regulatory authorities of a number of European States who had agreed to co-operate in developing and implementing common safety regulatory standards and procedures. It was not a regulatory body, regulation being achieved through the member authorities. It was in existence from 1970 until disbanded in 2009. Its headquarters were located in Hoofddorp near Schiphol airport in Netherlands.
The European Union Aviation Safety Agency (EASA) is an agency of the European Commission with responsibility for civil aviation safety in the European Union. It carries out certification, regulation and standardisation and also performs investigation and monitoring. It collects and analyses safety data, drafts and advises on safety legislation and co-ordinates with similar organisations in other parts of the world.
A type certificate signifies the airworthiness of a particular category of aircraft, according to its manufacturing design. Certification confirms that the aircraft of a new type intended for serial production is in compliance with applicable airworthiness requirements established by the national air law.
An Airworthiness Directive is a notification to owners and operators of certified aircraft that a known safety deficiency with a particular model of aircraft, engine, avionics or other system exists and must be corrected.
ARP4754, Aerospace Recommended Practice (ARP) ARP4754B, is a guideline from SAE International, dealing with the development processes which support certification of Aircraft systems, addressing "the complete aircraft development cycle, from systems requirements through systems verification." Revision A was released in December 2010. It was recognized by the FAA in AC 20-174 published November 2011. EUROCAE jointly issues the document as ED–79.
RTCA DO-254 / EUROCAE ED-80, Design Assurance Guidance for Airborne Electronic Hardware is a document providing guidance for the development of airborne electronic hardware, published by RTCA, Incorporated and EUROCAE. The DO-254/ED-80 standard was formally recognized by the FAA in 2005 via AC 20-152 as a means of compliance for the design assurance of electronic hardware in airborne systems. The guidance in this document is applicable, but not limited, to such electronic hardware items as
Parts Manufacturer Approval (PMA) is an approval granted by the United States Federal Aviation Administration (FAA) to a manufacturer of aircraft parts.
In aviation safety, master minimum equipment list, or MMEL, is a categorized list of on-board systems, instruments and equipment that may be inoperative for flight in a specified aircraft model. Procedures or conditions may be associated with items on the list. Any airworthiness-related equipment or system not on the list must be functional for flight.
In aviation, airworthiness is the measure of an aircraft's suitability for safe flight. Initial airworthiness is demonstrated by a certificate of airworthiness issued by the civil aviation authority in the state in which the aircraft is registered, and continuing airworthiness is achieved by performing the required maintenance actions.
JAR-OPS 1 is the Joint Aviation Requirement for the operation of commercial air transport (aeroplanes). Any commercial airline within the European Union flying jet or propeller aircraft has to comply with this standard. Compliance is governed through the issuance of an Air Operator Certificate (AOC) and an Operator's Licence (OL).
EU OPS is a European Union (EU) regulations specifying minimum safety and related procedures for commercial passenger and cargo fixed-wing aviation. The legislation is known officially as Council Regulation (EEC) No 3922/91 on the harmonisation of technical requirements and administrative procedures in the field of civil aviation.
A civil aviation authority (CAA) is a national or supranational statutory authority that oversees the regulation of civil aviation, including the maintenance of an aircraft register.
Blade off testing or blade out testing is a specific form of air safety testing required by the Federal Aviation Administration and other safety agencies to certify safety performance of jet engines. The tests require engine manufacturers to carry out at least two tests of the engine, to make sure that the engine can survive a compressor or fan blade breaking off within the engine and a turbine blade breaking off within the engine, without fragments being thrown through the outside enclosure of the engine, creating a contained engine failure.
The Unmanned Aerial Vehicle Systems Association (UAVS) was created in 1998 when key individuals from Matra-BAe Dynamics-Alenia (MBDA), British Aerospace (BAe) and Remote Services recognised that the United Kingdom UAV industry did not have a collective voice or representative in industry's interface with government and the regulators.
DO-178C, Software Considerations in Airborne Systems and Equipment Certification is the primary document by which the certification authorities such as FAA, EASA and Transport Canada approve all commercial software-based aerospace systems. The document is published by RTCA, Incorporated, in a joint effort with EUROC and replaces DO-178B. The new document is called DO-178C/ED-12C and was completed in November 2011 and approved by the RTCA in December 2011. It became available for sale and use in January 2012.
The International Association of Aviation Personnel Schools is a worldwide association of pilot schools. The organization was created on 25 October 1995, and was later renamed in 2009 to also include aviation schools not located in Europe.
Advisory circular (AC) refers to a type of publication offered by the Federal Aviation Administration (FAA) to provide guidance for compliance with airworthiness regulations, pilot certification, operational standards, training standards, and any other rules within the 14 CFR Aeronautics and Space Title. They define acceptable means, but not the only means, of accomplishing or showing compliance with airworthiness regulations. Generally informative in nature, Advisory Circulars are neither binding nor regulatory; yet some have the effect of de facto standards or regulations.
Continuing airworthiness management organisation (CAMO) is a civil aviation organization authorized to schedule and control continuing airworthiness activities on aircraft and their parts
This is a glossary of acronyms, initialisms and terms used for gliding and soaring. This is a specialized subset of broader aviation, aerospace, and aeronautical terminology. Additional definitions can be found in the FAA Glider Flying Handbook.
Certification Review Item (CRI) is a document describing an item that requires disposition prior to the issuance of Type Certificate (TC), change to TC approval or Supplemental Type Certificate (STC) by European Aviation Safety Agency (EASA).
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
