Matrix-assisted laser desorption/ionization

Last updated
MALDI TOF mass spectrometer MALDITOF.jpg
MALDI TOF mass spectrometer

In mass spectrometry, matrix-assisted laser desorption/ionization (MALDI) is an ionization technique that uses a laser energy-absorbing matrix to create ions from large molecules with minimal fragmentation. [1] It has been applied to the analysis of biomolecules (biopolymers such as DNA, proteins, peptides and carbohydrates) and various organic molecules (such as polymers, dendrimers and other macromolecules), which tend to be fragile and fragment when ionized by more conventional ionization methods. It is similar in character to electrospray ionization (ESI) in that both techniques are relatively soft (low fragmentation) ways of obtaining ions of large molecules in the gas phase, though MALDI typically produces far fewer multi-charged ions.

Contents

MALDI methodology is a three-step process. First, the sample is mixed with a suitable matrix material and applied to a metal plate. Second, a pulsed laser irradiates the sample, triggering ablation and desorption of the sample and matrix material. Finally, the analyte molecules are ionized by being protonated or deprotonated in the hot plume of ablated gases, and then they can be accelerated into whichever mass spectrometer is used to analyse them. [2]

History

The term matrix-assisted laser desorption ionization (MALDI) was coined in 1985 by Franz Hillenkamp, Michael Karas and their colleagues. [3] These researchers found that the amino acid alanine could be ionized more easily if it was mixed with the amino acid tryptophan and irradiated with a pulsed 266 nm laser. The tryptophan was absorbing the laser energy and helping to ionize the non-absorbing alanine. Peptides up to the 2843 Da peptide melittin could be ionized when mixed with this kind of "matrix". [4] The breakthrough for large molecule laser desorption ionization came in 1987 when Koichi Tanaka of Shimadzu Corporation and his co-workers used what they called the "ultra fine metal plus liquid matrix method" that combined 30 nm cobalt particles in glycerol with a 337 nm nitrogen laser for ionization. [5] Using this laser and matrix combination, Tanaka was able to ionize biomolecules as large as the 34,472 Da protein carboxypeptidase-A. Tanaka received one-quarter of the 2002 Nobel Prize in Chemistry for demonstrating that, with the proper combination of laser wavelength and matrix, a protein can be ionized. [6] Karas and Hillenkamp were subsequently able to ionize the 67 kDa protein albumin using a nicotinic acid matrix and a 266 nm laser. [7] Further improvements were realized through the use of a 355 nm laser and the cinnamic acid derivatives ferulic acid, caffeic acid and sinapinic acid as the matrix. [8] The availability of small and relatively inexpensive nitrogen lasers operating at 337 nm wavelength and the first commercial instruments introduced in the early 1990s brought MALDI to an increasing number of researchers. [9] Today, mostly organic matrices are used for MALDI mass spectrometry.

Matrix

UV MALDI matrix list
CompoundOther namesSolventWavelength (nm)Applications
2,5-dihydroxy benzoic acid (gentisic acid) [10] DHB, gentisic acid acetonitrile, water, methanol, acetone, chloroform 337, 355, 266 peptides, nucleotides, oligonucleotides, oligosaccharides
3,5-dimethoxy-4-hydroxycinnamic acid [8] [11] sinapic acid; sinapinic acid; SAacetonitrile, water, acetone, chloroform337, 355, 266peptides, proteins, lipids
4-hydroxy-3-methoxycinnamic acid [8] [11] ferulic acidacetonitrile, water, propanol 337, 355, 266proteins
α-cyano-4-hydroxycinnamic acid [12] CHCAacetonitrile, water, ethanol, acetone337, 355peptides, lipids, nucleotides
Picolinic acid [13] PAEthanol266oligonucleotides
3-hydroxy picolinic acid [14] HPAEthanol337, 355oligonucleotides

The matrix consists of crystallized molecules, of which the three most commonly used are sinapinic acid, α-cyano-4-hydroxycinnamic acid (α-CHCA, alpha-cyano or alpha-matrix) and 2,5-dihydroxybenzoic acid (DHB). [15] A solution of one of these molecules is made, often in a mixture of highly purified water and an organic solvent such as acetonitrile (ACN) or ethanol. A counter ion source such as trifluoroacetic acid (TFA) is usually added to generate the [M+H] ions. A good example of a matrix-solution would be 20 mg/mL sinapinic acid in ACN:water:TFA (50:50:0.1).

Notation for cinnamic acid substitutions. Cinnamic acid substitutions.PNG
Notation for cinnamic acid substitutions.

The identification of suitable matrix compounds is determined to some extent by trial and error, but they are based on some specific molecular design considerations. They are of a fairly low molecular weight (to allow easy vaporization), but are large enough (with a low enough vapor pressure) not to evaporate during sample preparation or while standing in the mass spectrometer. They are often acidic, therefore act as a proton source to encourage ionization of the analyte. Basic matrices have also been reported. [16] They have a strong optical absorption in either the UV or IR range, [17] so that they rapidly and efficiently absorb the laser irradiation. This efficiency is commonly associated with chemical structures incorporating several conjugated double bonds, as seen in the structure of cinnamic acid. They are functionalized with polar groups, allowing their use in aqueous solutions. They typically contain a chromophore.

The matrix solution is mixed with the analyte (e.g. protein-sample). A mixture of water and organic solvent allows both hydrophobic and water-soluble (hydrophilic) molecules to dissolve into the solution. This solution is spotted onto a MALDI plate (usually a metal plate designed for this purpose). The solvents vaporize, leaving only the recrystallized matrix, but now with analyte molecules embedded into MALDI crystals. The matrix and the analyte are said to be co-crystallized. Co-crystallization is a key issue in selecting a proper matrix to obtain a good quality mass spectrum of the analyte of interest.

In analysis of biological systems, inorganic salts, which are also part of protein extracts, interfere with the ionization process. The salts can be removed by solid phase extraction or by washing the dried-droplet MALDI spots with cold water. [18] Both methods can also remove other substances from the sample. The matrix-protein mixture is not homogeneous because the polarity difference leads to a separation of the two substances during co-crystallization. The spot diameter of the target is much larger than that of the laser, which makes it necessary to make many laser shots at different places of the target, to get the statistical average of the substance concentration within the target spot.

Naphthalene and naphthalene-like compounds can also be used as a matrix to ionize a sample Naphthalene 200.svg
Naphthalene and naphthalene-like compounds can also be used as a matrix to ionize a sample

The matrix can be used to tune the instrument to ionize the sample in different ways. As mentioned above, acid-base like reactions are often utilized to ionize the sample, however, molecules with conjugated pi systems, such as naphthalene like compounds, can also serve as an electron acceptor and thus a matrix for MALDI/TOF. [19] This is particularly useful in studying molecules that also possess conjugated pi systems. [20] The most widely used application for these matrices is studying porphyrin-like compounds such as chlorophyll. These matrices have been shown to have better ionization patterns that do not result in odd fragmentation patterns or complete loss of side chains. [21] It has also been suggested that conjugated porphyrin like molecules can serve as a matrix and cleave themselves eliminating the need for a separate matrix compound. [22]

Instrumentation

Diagram of a MALDI TOF instrument. Sample matrix ionized by radiant energy is ejected from surface. Sample travels into mass analyzer and is substantially detected. MALDI TOF EN.png
Diagram of a MALDI TOF instrument. Sample matrix ionized by radiant energy is ejected from surface. Sample travels into mass analyzer and is substantially detected.

There are several variations of the MALDI technology and comparable instruments are today produced for very different purposes, from more academic and analytical, to more industrial and high throughput. The mass spectrometry field has expanded into requiring ultrahigh resolution mass spectrometry such as the FT-ICR instruments [23] [24] as well as more high-throughput instruments. [25] As many MALDI MS instruments can be bought with an interchangeable ionization source (electrospray ionization, MALDI, atmospheric pressure ionization, etc.) the technologies often overlap and many times any soft ionization method could potentially be used. For more variations of soft ionization methods see: Soft laser desorption or Ion source.

Laser

MALDI techniques typically employ the use of UV lasers such as nitrogen lasers (337 nm) and frequency-tripled and quadrupled Nd:YAG lasers (355 nm and 266 nm respectively). [26]

Infrared laser wavelengths used for infrared MALDI include the 2.94 μm Er:YAG laser, mid-IR optical parametric oscillator, and 10.6 μm carbon dioxide laser. Although not as common, infrared lasers are used due to their softer mode of ionization. [27] IR-MALDI also has the advantage of greater material removal (useful for biological samples), less low-mass interference, and compatibility with other matrix-free laser desorption mass spectrometry methods.

Time of flight

Sample target for a MALDI mass spectrometer MALDI Target.jpg
Sample target for a MALDI mass spectrometer

The type of a mass spectrometer most widely used with MALDI is the time-of-flight mass spectrometer (TOF), mainly due to its large mass range. The TOF measurement procedure is also ideally suited to the MALDI ionization process since the pulsed laser takes individual 'shots' rather than working in continuous operation. MALDI-TOF instruments are often equipped with a reflectron (an "ion mirror") that reflects ions using an electric field. This increases the ion flight path, thereby increasing time of flight between ions of different m/z and increasing resolution. Modern commercial reflectron TOF instruments reach a resolving power m/Δm of 50,000 FWHM (full-width half-maximum, Δm defined as the peak width at 50% of peak height) or more. [28]

MALDI has been coupled with IMS-TOF MS to identify phosphorylated and non-phosphorylated peptides. [29] [30]

MALDI-FT-ICR MS has been demonstrated to be a useful technique where high resolution MALDI-MS measurements are desired. [31]

Atmospheric pressure

Atmospheric pressure (AP) matrix-assisted laser desorption/ionization (MALDI) is an ionization technique (ion source) that in contrast to vacuum MALDI operates at normal atmospheric environment. [32] The main difference between vacuum MALDI and AP-MALDI is the pressure in which the ions are created. In vacuum MALDI, ions are typically produced at 10 mTorr or less while in AP-MALDI ions are formed in atmospheric pressure. In the past, the main disadvantage of the AP-MALDI technique compared to the conventional vacuum MALDI has been its limited sensitivity; however, ions can be transferred into the mass spectrometer with high efficiency and attomole detection limits have been reported. [33] AP-MALDI is used in mass spectrometry (MS) in a variety of applications ranging from proteomics to drug discovery. Popular topics that are addressed by AP-MALDI mass spectrometry include: proteomics; mass analysis of DNA, RNA, PNA, lipids, oligosaccharides, phosphopeptides, bacteria, small molecules and synthetic polymers, similar applications as available also for vacuum MALDI instruments. The AP-MALDI ion source is easily coupled to an ion trap mass spectrometer [34] or any other MS system equipped with electrospray ionization (ESI) or nanoESI source.

MALDI with ionization at reduced pressure is known to produce mainly singly-charged ions (see "Ionization mechanism" below). In contrast, ionization at atmopsheric pressure can generate highly-charged analytes as was first shown for infrared [35] and later also for nitrogen lasers. [36] Multiple charging of analytes is of great importance, because it allows to measure high-molecular-weight compounds like proteins in instruments, which provide only smaller m/z detection ranges such as quadrupoles. Besides the pressure, the composition of the matrix is important to achieve this effect.

Aerosol

In aerosol mass spectrometry, one of the ionization techniques consists in firing a laser to individual droplets. These systems are called single particle mass spectrometers (SPMS). [37] The sample may optionally be mixed with a MALDI matrix prior to aerosolization.

Ionization mechanism

The laser is fired at the matrix crystals in the dried-droplet spot. The matrix absorbs the laser energy and it is thought that primarily the matrix is desorbed and ionized (by addition of a proton) by this event. The hot plume produced during ablation contains many species: neutral and ionized matrix molecules, protonated and deprotonated matrix molecules, matrix clusters and nanodroplets. Ablated species may participate in the ionization of analyte, though the mechanism of MALDI is still debated. The matrix is then thought to transfer protons to the analyte molecules (e.g., protein molecules), thus charging the analyte. [38] An ion observed after this process will consist of the initial neutral molecule [M] with ions added or removed. This is called a quasimolecular ion, for example [M+H]+ in the case of an added proton, [M+Na]+ in the case of an added sodium ion, or [M-H]− in the case of a removed proton. MALDI is capable of creating singly charged ions or multiply charged ions ([M+nH]n+) depending on the nature of the matrix, the laser intensity, and/or the voltage used. Note that these are all even-electron species. Ion signals of radical cations (photoionized molecules) can be observed, e.g., in the case of matrix molecules and other organic molecules.

The gas phase proton transfer model, [2] implemented as the coupled physical and chemical dynamics (CPCD) model, [39] of UV laser MALDI postulates primary and secondary processes leading to ionization. [40] Primary processes involve initial charge separation through absorption of photons by the matrix and pooling of the energy to form matrix ion pairs. Primary ion formation occurs through absorption of a UV photon to create excited state molecules by

S0 + hν → S1
S1 + S1 → S0 + Sn
S1 + Sn → M+ + M−

where S0 is the ground electronic state, S1 the first electronic excited state, and Sn is a higher electronic excited state. [39] The product ions can be proton transfer or electron transfer ion pairs, indicated by M+ and M− above. Secondary processes involve ion-molecule reactions to form analyte ions.

In the lucky survivor model, positive ions can be formed from highly charged clusters produced during break-up of the matrix- and analyte-containing solid. LuckySurvivor.jpg
In the lucky survivor model, positive ions can be formed from highly charged clusters produced during break-up of the matrix- and analyte-containing solid.

The lucky survivor model (cluster ionization mechanism [2] ) postulates that analyte molecules are incorporated in the matrix maintaining the charge state from solution. [41] [42] Ion formation occurs through charge separation upon fragmentation of laser ablated clusters. [2] Ions that are not neutralized by recombination with photoelectrons or counter ions are the so-called lucky survivors.

The thermal model postulates that the high temperature facilitates the proton transfer between matrix and analyte in melted matrix liquid. [43] Ion-to-neutral ratio is an important parameter to justify the theoretical model, and the mistaken citation of ion-to-neutral ratio could result in an erroneous determination of the ionization mechanism. [44] The model quantitatively predicts the increase in total ion intensity as a function of the concentration and proton affinity of the analytes, and the ion-to-neutral ratio as a function of the laser fluences. [45] [46] This model also suggests that metal ion adducts (e.g., [M+Na]+ or [M+K]+) are mainly generated from the thermally induced dissolution of salt. [47]

The matrix-assisted ionization (MAI) method uses matrix preparation similar to MALDI but does not require laser ablation to produce analyte ions of volatile or nonvolatile compounds. [48] Simply exposing the matrix with analyte to the vacuum of the mass spectrometer creates ions with nearly identical charge states to electrospray ionization. [49] It is suggested that there are likely mechanistic commonality between this process and MALDI. [42]

Ion yield is typically estimated to range from 10−4 to 10−7, [50] with some experiments hinting to even lower yields of 10−9. [51] The issue of low ion yields had been addressed, already shortly after introduction of MALDI by various attempts, including post-ionization utilizing a second laser. [52] Most of these attempts showed only limited success, with low signal increases. This might be attributed to the fact that axial time-of-flight instruments were used, which operate at pressures in the source region of 10−5 to 10−6, which results in rapid plume expansion with particle velocities of up to 1000 m/s. [53] In 2015, successful laser post-ionization was reported, using a modified MALDI source operated at an elevated pressure of ~3 mbar coupled to an orthogonal time-of-flight mass analyzer, and employing a wavelength-tunable post-ionization laser, operated at wavelength from 260 nm to 280 nm, below the two-photon ionization threshold of the matrices used, which elevated ion yields of several lipids and small molecules by up to three orders of magnitude. [54] This approach, called MALDI-2, due to the second laser, and the second MALDI-like ionization process, was afterwards adopted for other mass spectrometers, all equipped with sources operating in the low mbar range. [55] [56]

Applications

Biochemistry

In proteomics, MALDI is used for the rapid identification of proteins isolated by using gel electrophoresis: SDS-PAGE, size exclusion chromatography, affinity chromatography, strong/weak ion exchange, isotope coded protein labeling (ICPL), and two-dimensional gel electrophoresis. Peptide mass fingerprinting is the most popular analytical application of MALDI-TOF mass spectrometers. MALDI TOF/TOF mass spectrometers are used to reveal amino acid sequence of peptides using post-source decay or high energy collision-induced dissociation (further use see mass spectrometry).

MALDI-TOF have been used to characterise post-translational modifications. For example, it has been widely applied to study protein methylation and demethylation. [57] [58] However, care must be taken when studying post-translational modifications by MALDI-TOF. For example, it has been reported that loss of sialic acid has been identified in papers when dihydroxybenzoic acid (DHB) has been used as a matrix for MALDI MS analysis of glycosylated peptides. Using sinapinic acid, 4-HCCA and DHB as matrices, S. Martin studied loss of sialic acid in glycosylated peptides by metastable decay in MALDI/TOF in linear mode and reflector mode. [59] A group at Shimadzu Corporation derivatized the sialic acid by an amidation reaction as a way to improve detection sensitivity [60] and also demonstrated that ionic liquid matrix reduces a loss of sialic acid during MALDI/TOF MS analysis of sialylated oligosaccharides. [61] THAP, [62] DHAP, [63] and a mixture of 2-aza-2-thiothymine and phenylhydrazine [64] have been identified as matrices that could be used to minimize loss of sialic acid during MALDI MS analysis of glycosylated peptides. It has been reported that a reduction in loss of some post-translational modifications can be accomplished if IR MALDI is used instead of UV MALDI. [65]

Besides proteins, MALDI-TOF has also been applied to study lipids. [66] For example, it has been applied to study the catalytic reactions of phospholipases. [67] [68] In addition to lipids, oligonucleotides have also been characterised by MALDI-TOF. For example, in molecular biology, a mixture of 5-methoxysalicylic acid and spermine can be used as a matrix for oligonucleotides analysis in MALDI mass spectrometry, [69] for instance after oligonucleotide synthesis.

Organic chemistry

Some synthetic macromolecules, such as catenanes and rotaxanes, dendrimers and hyperbranched polymers, and other assemblies, have molecular weights extending into the thousands or tens of thousands, where most ionization techniques have difficulty producing molecular ions. MALDI is a simple and fast analytical method that can allow chemists to rapidly analyze the results of such syntheses and verify their results.[ citation needed ]

Polymers

In polymer chemistry, MALDI can be used to determine the molar mass distribution. [70] Polymers with polydispersity greater than 1.2 are difficult to characterize with MALDI due to the signal intensity discrimination against higher mass oligomers. [71] [72] [73]

A good matrix for polymers is dithranol [74] or AgTFA. [75] The sample must first be mixed with dithranol and the AgTFA added afterwards; otherwise the sample will precipitate out of solution.

Microbiology

Example of a workup algorithm of possible bacterial infection in cases with no specifically requested targets (non-bacteria, mycobacteria etc.), with most common situations and agents seen in a New England community hospital setting. MALDI-TOF is seen in multiple situations in the "same day tests" row at center-bottom. Diagnostic algorithm of possible bacterial infection.png
Example of a workup algorithm of possible bacterial infection in cases with no specifically requested targets (non-bacteria, mycobacteria etc.), with most common situations and agents seen in a New England community hospital setting. MALDI-TOF is seen in multiple situations in the "same day tests" row at center-bottom.

MALDI-TOF spectra are often used for the identification of microorganisms such as bacteria or fungi. A portion of a colony of the microbe in question is placed onto the sample target and overlaid with matrix. The mass spectra of expressed proteins generated are analyzed by dedicated software and compared with stored profiles for species determination in what is known as biotyping. It offers benefits to other immunological or biochemical procedures and has become a common method for species identification in clinical microbiological laboratories. [76] [77] Benefits of high resolution MALDI-MS performed on a Fourier transform ion cyclotron resonance mass spectrometry (also known as FT-MS) have been demonstrated for typing and subtyping viruses though single ion detection known as proteotyping, with a particular focus on influenza viruses. [78]

One main advantage over other microbiological identification methods is its ability to rapidly and reliably identify, at low cost, a wide variety of microorganisms directly from the selective medium used to isolate them. The absence of the need to purify the suspect or "presumptive" colony [79] allows for a much faster turn-around times. For example, it has been demonstrated that MALDI-TOF can be used to detect bacteria directly from blood cultures. [80]

Another advantage is the potential to predict antibiotic susceptibility of bacteria. A single mass spectral peak can predict methicillin resistance of Staphylococcus aureus. [81] MALDI can also detect carbapenemase of carbapenem-resistant enterobacteriaceae, [82] including Acinetobacter baumannii [83] and Klebsiella pneumoniae . [84] However, most proteins that mediate antibiotic resistance are larger than MALDI-TOF's 2000–20,000 Da range for protein peak interpretation and only occasionally, as in the 2011 Klebsiella pneumoniae carbapenemase (KPC) outbreak at the NIH, a correlation between a peak and resistance conferring protein can be made. [85]

Parasitology

MALDI-TOF spectra have been used for the detection and identification of various parasites such as trypanosomatids, [86] Leishmania [87] and Plasmodium . [88] In addition to these unicellular parasites, MALDI/TOF can be used for the identification of parasitic insects such as lice [89] or cercariae, the free-swimming stage of trematodes. [90]

Medicine

MALDI-TOF spectra are often utilized in tandem with other analysis and spectroscopy techniques in the diagnosis of diseases. MALDI/TOF is a diagnostic tool with much potential because it allows for the rapid identification of proteins and changes to proteins without the cost or computing power of sequencing nor the skill or time needed to solve a crystal structure in X-ray crystallography.[ citation needed ]

One example of this is necrotizing enterocolitis (NEC), which is a devastating disease that affects the bowels of premature infants. The symptoms of NEC are very similar to those of sepsis, and many infants die awaiting diagnosis and treatment. MALDI/TOF was used to identify bacteria present in the fecal matter of NEC positive infants. This study focused on characterization of the fecal microbiota associated with NEC and did not address the mechanism of disease. There is hope that a similar technique could be used as a quick, diagnostic tool that would not require sequencing. [91]

Another example of the diagnostic power of MALDI/TOF is in the area of cancer. Pancreatic cancer remains one of the most deadly and difficult to diagnose cancers. [92] Impaired cellular signaling due to mutations in membrane proteins has been long suspected to contribute to pancreatic cancer. [93] MALDI/TOF has been used to identify a membrane protein associated with pancreatic cancer and at one point may even serve as an early detection technique. [94] [ non-primary source needed ]

MALDI/TOF can also potentially be used to dictate treatment as well as diagnosis. MALDI/TOF serves as a method for determining the drug resistance of bacteria, especially to β-lactams (Penicillin family). The MALDI/TOF detects the presence of carbapenemases, which indicates drug resistance to standard antibiotics. It is predicted that this could serve as a method for identifying a bacterium as drug resistant in as little as three hours. This technique could help physicians decide whether to prescribe more aggressive antibiotics initially. [95]

Detection of protein complexes

Following initial observations that some peptide-peptide complexes could survive MALDI deposition and ionization, [96] studies of large protein complexes using MALDI-MS have been reported. [97] [98]

Small molecules

While MALDI is a common technique for large macro-molecules, it is often possible to also analyze small molecules with mass below 1000 Da.  The problem with small molecules is that of matrix effects, where signal interference, detector saturation, or suppression of the analyte signal is possible since the matrices often consists of small molecules themselves. The choice of matrix is highly dependent on what molecules are to be analyzed. [99] [100]

See also

Related Research Articles

<span class="mw-page-title-main">Ion source</span> Device that creates charged atoms and molecules (ions)

An ion source is a device that creates atomic and molecular ions. Ion sources are used to form ions for mass spectrometers, optical emission spectrometers, particle accelerators, ion implanters and ion engines.

<span class="mw-page-title-main">Peptide mass fingerprinting</span> Analytical technique for protein identification

Peptide mass fingerprinting (PMF), also known as protein fingerprinting, is an analytical technique for protein identification in which the unknown protein of interest is first cleaved into smaller peptides, whose absolute masses can be accurately measured with a mass spectrometer such as MALDI-TOF or ESI-TOF. The method was developed in 1993 by several groups independently. The peptide masses are compared to either a database containing known protein sequences or even the genome. This is achieved by using computer programs that translate the known genome of the organism into proteins, then theoretically cut the proteins into peptides, and calculate the absolute masses of the peptides from each protein. They then compare the masses of the peptides of the unknown protein to the theoretical peptide masses of each protein encoded in the genome. The results are statistically analyzed to find the best match.

<span class="mw-page-title-main">History of mass spectrometry</span>

The history of mass spectrometry has its roots in physical and chemical studies regarding the nature of matter. The study of gas discharges in the mid 19th century led to the discovery of anode and cathode rays, which turned out to be positive ions and electrons. Improved capabilities in the separation of these positive ions enabled the discovery of stable isotopes of the elements. The first such discovery was with the element neon, which was shown by mass spectrometry to have at least two stable isotopes: 20Ne and 22Ne. Mass spectrometers were used in the Manhattan Project for the separation of isotopes of uranium necessary to create the atomic bomb.

Surface-enhanced laser desorption/ionization (SELDI) is a soft ionization method in mass spectrometry (MS) used for the analysis of protein mixtures. It is a variation of matrix-assisted laser desorption/ionization (MALDI). In MALDI, the sample is mixed with a matrix material and applied to a metal plate before irradiation by a laser, whereas in SELDI, proteins of interest in a sample become bound to a surface before MS analysis. The sample surface is a key component in the purification, desorption, and ionization of the sample. SELDI is typically used with time-of-flight (TOF) mass spectrometers and is used to detect proteins in tissue samples, blood, urine, or other clinical samples, however, SELDI technology can potentially be used in any application by simply modifying the sample surface.

Soft laser desorption (SLD) is laser desorption of large molecules that results in ionization without fragmentation. "Soft" in the context of ion formation means forming ions without breaking chemical bonds. "Hard" ionization is the formation of ions with the breaking of bonds and the formation of fragment ions.

<span class="mw-page-title-main">MALDI imaging</span>

MALDI mass spectrometry imaging (MALDI-MSI) is the use of matrix-assisted laser desorption ionization as a mass spectrometry imaging technique in which the sample, often a thin tissue section, is moved in two dimensions while the mass spectrum is recorded. Advantages, like measuring the distribution of a large amount of analytes at one time without destroying the sample, make it a useful method in tissue-based study.

<span class="mw-page-title-main">Protein mass spectrometry</span> Application of mass spectrometry

Protein mass spectrometry refers to the application of mass spectrometry to the study of proteins. Mass spectrometry is an important method for the accurate mass determination and characterization of proteins, and a variety of methods and instrumentations have been developed for its many uses. Its applications include the identification of proteins and their post-translational modifications, the elucidation of protein complexes, their subunits and functional interactions, as well as the global measurement of proteins in proteomics. It can also be used to localize proteins to the various organelles, and determine the interactions between different proteins as well as with membrane lipids.

<span class="mw-page-title-main">Desorption electrospray ionization</span>

Desorption electrospray ionization (DESI) is an ambient ionization technique that can be coupled to mass spectrometry (MS) for chemical analysis of samples at atmospheric conditions. Coupled ionization sources-MS systems are popular in chemical analysis because the individual capabilities of various sources combined with different MS systems allow for chemical determinations of samples. DESI employs a fast-moving charged solvent stream, at an angle relative to the sample surface, to extract analytes from the surfaces and propel the secondary ions toward the mass analyzer. This tandem technique can be used to analyze forensics analyses, pharmaceuticals, plant tissues, fruits, intact biological tissues, enzyme-substrate complexes, metabolites and polymers. Therefore, DESI-MS may be applied in a wide variety of sectors including food and drug administration, pharmaceuticals, environmental monitoring, and biotechnology.

<span class="mw-page-title-main">Time-of-flight mass spectrometry</span> Method of mass spectrometry

Time-of-flight mass spectrometry (TOFMS) is a method of mass spectrometry in which an ion's mass-to-charge ratio is determined by a time of flight measurement. Ions are accelerated by an electric field of known strength. This acceleration results in an ion having the same kinetic energy as any other ion that has the same charge. The velocity of the ion depends on the mass-to-charge ratio. The time that it subsequently takes for the ion to reach a detector at a known distance is measured. This time will depend on the velocity of the ion, and therefore is a measure of its mass-to-charge ratio. From this ratio and known experimental parameters, one can identify the ion.

Sample preparation for mass spectrometry is used for the optimization of a sample for analysis in a mass spectrometer (MS). Each ionization method has certain factors that must be considered for that method to be successful, such as volume, concentration, sample phase, and composition of the analyte solution. Quite possibly the most important consideration in sample preparation is knowing what phase the sample must be in for analysis to be successful. In some cases the analyte itself must be purified before entering the ion source. In other situations, the matrix, or everything in the solution surrounding the analyte, is the most important factor to consider and adjust. Often, sample preparation itself for mass spectrometry can be avoided by coupling mass spectrometry to a chromatography method, or some other form of separation before entering the mass spectrometer. In some cases, the analyte itself must be adjusted so that analysis is possible, such as in protein mass spectrometry, where usually the protein of interest is cleaved into peptides before analysis, either by in-gel digestion or by proteolysis in solution.

<span class="mw-page-title-main">Laser spray ionization</span>

Laser spray ionization refers to one of several methods for creating ions using a laser interacting with a spray of neutral particles or ablating material to create a plume of charged particles. The ions thus formed can be separated by m/z with mass spectrometry. Laser spray is one of several ion sources that can be coupled with liquid chromatography-mass spectrometry for the detection of larger molecules.

<span class="mw-page-title-main">Matrix-assisted laser desorption electrospray ionization</span>

Matrix-assisted laser desorption electrospray ionization (MALDESI) was first introduced in 2006 as a novel ambient ionization technique which combines the benefits of electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI). An infrared (IR) or ultraviolet (UV) laser can be utilized in MALDESI to resonantly excite an endogenous or exogenous matrix. The term 'matrix' refers to any molecule that is present in large excess and absorbs the energy of the laser, thus facilitating desorption of analyte molecules. The original MALDESI design was implemented using common organic matrices, similar to those used in MALDI, along with a UV laser. The current MALDESI source employs endogenous water or a thin layer of exogenously deposited ice as the energy-absorbing matrix where O-H symmetric and asymmetric stretching bonds are resonantly excited by a mid-IR laser.

<span class="mw-page-title-main">Ion-mobility spectrometry–mass spectrometry</span>

Ion mobility spectrometry–mass spectrometry (IMS-MS) is an analytical chemistry method that separates gas phase ions based on their interaction with a collision gas and their masses. In the first step, the ions are separated according to their mobility through a buffer gas on a millisecond timescale using an ion mobility spectrometer. The separated ions are then introduced into a mass analyzer in a second step where their mass-to-charge ratios can be determined on a microsecond timescale. The effective separation of analytes achieved with this method makes it widely applicable in the analysis of complex samples such as in proteomics and metabolomics.

<span class="mw-page-title-main">Capillary electrophoresis–mass spectrometry</span>

Capillary electrophoresis–mass spectrometry (CE–MS) is an analytical chemistry technique formed by the combination of the liquid separation process of capillary electrophoresis with mass spectrometry. CE–MS combines advantages of both CE and MS to provide high separation efficiency and molecular mass information in a single analysis. It has high resolving power and sensitivity, requires minimal volume and can analyze at high speed. Ions are typically formed by electrospray ionization, but they can also be formed by matrix-assisted laser desorption/ionization or other ionization techniques. It has applications in basic research in proteomics and quantitative analysis of biomolecules as well as in clinical medicine. Since its introduction in 1987, new developments and applications have made CE-MS a powerful separation and identification technique. Use of CE–MS has increased for protein and peptides analysis and other biomolecules. However, the development of online CE–MS is not without challenges. Understanding of CE, the interface setup, ionization technique and mass detection system is important to tackle problems while coupling capillary electrophoresis to mass spectrometry.

<span class="mw-page-title-main">Ambient ionization</span>

Ambient ionization is a form of ionization in which ions are formed in an ion source outside the mass spectrometer without sample preparation or separation. Ions can be formed by extraction into charged electrospray droplets, thermally desorbed and ionized by chemical ionization, or laser desorbed or ablated and post-ionized before they enter the mass spectrometer.

<span class="mw-page-title-main">Surface-assisted laser desorption/ionization</span>

Surface-assisted laser desorption/ionization (SALDI) is a soft laser desorption technique used for mass spectrometry analysis of biomolecules, polymers, and small organic molecules. In its first embodiment Koichi Tanaka used a cobalt/glycerol liquid matrix and subsequent applications included a graphite/glycerol liquid matrix as well as a solid surface of porous silicon. The porous silicon represents the first matrix-free SALDI surface analysis allowing for facile detection of intact molecular ions, these porous silicon surfaces also facilitated the analysis of small molecules at the yoctomole level. At present laser desorption/ionization methods using other inorganic matrices such as nanomaterials are often regarded as SALDI variants. As an example, silicon nanowires as well as Titania nanotube arrays (NTA) have been used as substrates to detect small molecules. SALDI is used to detect proteins and protein-protein complexes. A related method named "ambient SALDI" - which is a combination of conventional SALDI with ambient mass spectrometry incorporating the direct analysis real time (DART) ion source has also been demonstrated. SALDI is considered one of the most important techniques in MS and has many applications.

<span class="mw-page-title-main">Desorption/ionization on silicon</span> Soft laser desorption method

Desorption/ionization on silicon (DIOS) is a soft laser desorption method used to generate gas-phase ions for mass spectrometry analysis. DIOS is considered the first surface-based surface-assisted laser desorption/ionization (SALDI-MS) approach. Prior approaches were accomplished using nanoparticles in a matrix of glycerol, while DIOS is a matrix-free technique in which a sample is deposited on a nanostructured surface and the sample desorbed directly from the nanostructured surface through the adsorption of laser light energy. DIOS has been used to analyze organic molecules, metabolites, biomolecules and peptides, and, ultimately, to image tissues and cells.

<span class="mw-page-title-main">Matrix-assisted ionization</span>

In mass spectrometry, matrix-assisted ionization is a low fragmentation (soft) ionization technique which involves the transfer of particles of the analyte and matrix sample from atmospheric pressure (AP) to the heated inlet tube connecting the AP region to the vacuum of the mass analyzer.

In mass spectrometry, a matrix is a compound that promotes the formation of ions. Matrix compounds are used in matrix-assisted laser desorption/ionization (MALDI), matrix-assisted ionization (MAI), and fast atom bombardment (FAB).

References

  1. ↑ Hillenkamp, Franz; Karas, Michael; Beavis, Ronald C.; Chait, Brian T. (1991). "Matrix-assisted laser desorption/ionization mass spectrometry of biopolymers". Analytical Chemistry. 63 (24): 1193A–1203A. doi:10.1021/ac00024a002. ISSN   0003-2700. PMID   1789447.
  2. 1 2 3 4 Karas, Michael; Krüger, Ralf (2003). "Ion Formation in MALDI: The Cluster Ionization Mechanism". Chemical Reviews. 103 (2): 427–440. doi:10.1021/cr010376a. ISSN   0009-2665. PMID   12580637.
  3. ↑ Karas, M.; Bachmann, D.; Hillenkamp, F. (1985). "Influence of the Wavelength in High-Irradiance Ultraviolet Laser Desorption Mass Spectrometry of Organic Molecules". Analytical Chemistry . 57 (14): 2935–9. doi:10.1021/ac00291a042.
  4. ↑ Karas, M.; Bachmann, D.; Bahr, U.; Hillenkamp, F. (1987). "Matrix-Assisted Ultraviolet Laser Desorption of Non-Volatile Compounds". International Journal of Mass Spectrometry and Ion Processes . 78: 53–68. Bibcode:1987IJMSI..78...53K. doi:10.1016/0168-1176(87)87041-6.
  5. ↑ Tanaka, K.; Waki, H.; Ido, Y.; Akita, S.; Yoshida, Y.; Yoshida, T.; Matsuo, T. (1988). "Protein and Polymer Analyses up to m/z 100 000 by Laser Ionization Time-of flight Mass Spectrometry". Rapid Communications in Mass Spectrometry . 2 (20): 151–3. Bibcode:1988RCMS....2..151T. doi:10.1002/rcm.1290020802.
  6. ↑ Markides, K.; Gräslund, A. (9 October 2002). "Advanced information on the Nobel Prize in Chemistry 2002" (PDF). The Royal Swedish Academy of Sciences. pp. 1–13. Retrieved 2013-08-28.
  7. ↑ Karas, M.; Hillenkamp, F. (1988). "Laser desorption ionization of proteins with molecular masses exceeding 10,000 daltons". Analytical Chemistry . 60 (20): 2299–301. doi:10.1021/ac00171a028. PMID   3239801.
  8. 1 2 3 Beavis, R. C.; Chait, B. T.; Standing, K. G. (1989). "Matrix-assisted laser-desorption mass spectrometry using 355 nm radiation". Rapid Communications in Mass Spectrometry . 3 (12): 436–9. Bibcode:1989RCMS....3..436B. doi:10.1002/rcm.1290031208. PMID   2520224.
  9. ↑ Karas, M.; Bahr, U. (1990). "Laser Desorption Ionization Mass Spectrometry of Large Biomolecules". Trends in Analytical Chemistry . 9 (10): 321–5. doi:10.1016/0165-9936(90)85065-F.
  10. ↑ Strupat, K.; Karas, M.; Hillenkamp, F. (1991). "2,5-Dihidroxybenzoic acid: A new matrix for laser desorption—ionization mass spectrometry". International Journal of Mass Spectrometry and Ion Processes . 111: 89–102. Bibcode:1991IJMSI.111...89S. doi:10.1016/0168-1176(91)85050-V.
  11. 1 2 Beavis, R. C.; Chait, B. T.; Fales, H. M. (1989). "Cinnamic acid derivatives as matrices for ultraviolet laser desorption mass spectrometry of proteins". Rapid Communications in Mass Spectrometry . 3 (12): 432–5. Bibcode:1989RCMS....3..432B. doi:10.1002/rcm.1290031207. PMID   2520223.
  12. ↑ Beavis, R. C.; Chaudhary, T.; Chait, B. T. (1992). "α-Cyano-4-hydroxycinnamic acid as a matrix for matrix-assisted laser desorption mass spectrometry". Organic Mass Spectrometry . 27 (2): 156–8. doi:10.1002/oms.1210270217.
  13. ↑ Tang, K.; Taranenko, N. I.; Allman, S. L.; Cháng, L. Y.; Chen, C. H.; Lubman, D. M. (1994). "Detection of 500-nucleotide DNA by laser desorption mass spectrometry". Rapid Communications in Mass Spectrometry . 8 (9): 727–30. Bibcode:1994RCMS....8..727T. doi:10.1002/rcm.1290080913. PMID   7949335.
  14. ↑ Wu, K. J.; Steding, A.; Becker, C. H. (1993). "Matrix-assisted laser desorption time-of-flight mass spectrometry of oligonucleotides using 3-hydroxypicolinic acid as an ultraviolet-sensitive matrix". Rapid Communications in Mass Spectrometry . 7 (2): 142–6. Bibcode:1993RCMS....7..142W. doi:10.1002/rcm.1290070206. PMID   8457722.
  15. ↑ Korfmacher, Walter A. (2009). Using Mass Spectrometry for Drug Metabolism Studies. CRC Press. p. 342. ISBN   9781420092219.
  16. ↑ Fitzgerald, M. C.; Parr, G. R.; Smith, L. M. (1993). "Basic matrixes for the matrix-assisted laser desorption/ionization mass spectrometry of proteins and oligonucleotides". Analytical Chemistry . 65 (22): 3204–11. doi:10.1021/ac00070a007. PMID   8291672.
  17. ↑ Zenobi, R.; Knochenmuss, R. (1998). "Ion formation in MALDI mass spectrometry". Mass Spectrometry Reviews . 17 (5): 337–366. Bibcode:1998MSRv...17..337Z. doi:10.1002/(SICI)1098-2787(1998)17:5<337::AID-MAS2>3.0.CO;2-S.
  18. ↑ Xu, Yingda; Bruening, Merlin L.; Watson, J. Throck (2003). "Non-specific, on-probe cleanup methods for MALDI-MS samples". Mass Spectrometry Reviews. 22 (6): 429–440. Bibcode:2003MSRv...22..429X. doi:10.1002/mas.10064. ISSN   0277-7037. PMID   14528495.
  19. ↑ Nazim Boutaghou, M.; Cole, R. B. (2012). "9,10-Diphenylanthracene as a matrix for MALDI-MS electron transfer secondary reactions". J. Mass Spectrom. 47 (8): 995–1003. Bibcode:2012JMSp...47..995N. doi:10.1002/jms.3027. PMID   22899508.
  20. ↑ Suzuki, T.; Midonoya, H.; Shioi, Y. (2009). "Analysis of chlorophylls and their derivatives by matrix-assisted laser desorption/ionization–time-of-flight mass spectrometry". Anal. Biochem. 390 (1): 57–62. doi:10.1016/j.ab.2009.04.005. hdl: 10297/4147 . PMID   19364490. S2CID   2634483.
  21. ↑ Wei, J.; Li, H.; Barrow, M. P.; O'Connor, P. B. (2013). "Structural characterization of chlorophyll-a by high resolution tandem mass spectrometry". J. Am. Soc. Mass Spectrom. 24 (5): 753–760. Bibcode:2013JASMS..24..753W. doi:10.1007/s13361-013-0577-1. PMID   23504642. S2CID   43158125.
  22. ↑ Srinivasan, N.; Haney, C. A.; Lindsey, J. S.; Zhang, W.; Chait, B. T. (1999). "Investigation of MALDI-TOF mass spectrometry of diverse synthetic metalloporphyrins, phthalocyanines and multiporphyrin arrays". Journal of Porphyrins and Phthalocyanines. 3 (4): 283–291. doi:10.1002/(SICI)1099-1409(199904)3:4<283::AID-JPP132>3.0.CO;2-F.
  23. ↑ "Talking About a Revolution: FT-ICR Mass Spectrometry Offers High Resolution and Mass Accuracy for Pr".
  24. ↑ Schmitt-Kopplin, P; Hertkorn, N (2007). "Ultrahigh resolution mass spectrometry". Anal Bioanal Chem. 389 (5): 1309–1310. doi:10.1007/s00216-007-1589-0. PMC   2129108 .
  25. ↑ Ghyselinck, Jonas; Van Hoorde, Koenraad; Hoste, Bart; Heylen, Kim; De Vos, Paul (September 2011). "Evaluation of MALDI-TOF MS as a tool for high-throughput dereplication". Journal of Microbiological Methods. 86 (3): 327–336. doi:10.1016/j.mimet.2011.06.004. PMID   21699925.
  26. ↑ Dreisewerd, Klaus (2014). "Recent methodological advances in MALDI mass spectrometry". Analytical and Bioanalytical Chemistry. 406 (9–10): 2261–2278. doi:10.1007/s00216-014-7646-6. ISSN   1618-2642. PMID   24652146. S2CID   5467069.
  27. ↑ Murray, K (2006). "Chapter 9 Desorption by Photons: Laser Desorption and Matridx-Assisted Laser Desorption Ionization (MALDI) – Infrared Matrix-Assisted Laser Desorption Ionization". In Gross, Michael L.; Caprioli, Richard M. (eds.). The Encyclopedia of Mass Spectrometry. Vol. 6: Ionization Methods. Elsevier Science. ISBN   9780080438016 . Retrieved 2017-04-05.
  28. ↑ Xian, Feng; Hendrickson, Christopher L.; Marshall, Alan G. (2012-01-17). "High Resolution Mass Spectrometry". Analytical Chemistry. 84 (2): 708–719. doi:10.1021/ac203191t. ISSN   0003-2700. PMID   22263633.
  29. ↑ Ruotolo, B. T.; Gillig, K. J.; Woods, A. S.; Egan, T. F.; Ugarov, M. V.; Schultz, J. A.; Russell, D. H. (2004). "Analysis of Phosphorylated Peptides by Ion Mobility-Mass Spectrometry". Analytical Chemistry . 76 (22): 6727–6733. doi:10.1021/ac0498009. PMID   15538797.(subscription required)
  30. ↑ Ruotolo, B. T.; Verbeck, G. F.; Thomson, L. M.; Woods, A. S.; Gillig, K. J.; Russell, D. H. (2002). "Distinguishing between Phosphorylated and Nonphosphorylated Peptides with Ion Mobility−Mass Spectrometry". Journal of Proteome Research . 1 (4): 303–306. doi:10.1021/pr025516r. PMID   12645885.(subscription required)
  31. ↑ Pasa-Tolic, L.; Huang, Y.; Guan, S.; Kim, H. S.; Marshall, A. G. (1995). "Ultrahigh-resolution matrix-assisted laser desorption/ionization Fourier transform ion cyclotron resonance mass spectra of peptides". Journal of Mass Spectrometry . 30 (6): 825–833. Bibcode:1995JMSp...30..825P. doi:10.1002/jms.1190300607.(subscription required)
  32. ↑ Laiko, V. V.; Baldwin, M. A.; Burlingame, A. L. (2000). "Atmospheric pressure matrix-assisted laser desorption/ionization mass spectrometry". Analytical Chemistry . 72 (4): 652–7. doi:10.1021/ac990998k. PMID   10701247.
  33. ↑ Strupat, K.; Scheibner, O.; Arrey, T.; Bromirski, M. (2011). "Biological Applications of AP MALDI with Thermo Scientific Exactive Orbitrap MS" (PDF). 443-539-1710. Thermo Scientific . Retrieved 17 June 2011.
  34. ↑ Laiko, V. V.; Moyer, S. C.; Cotter, R. J. (2000). "Atmospheric pressure MALDI/ion trap mass spectrometry". Analytical Chemistry . 72 (21): 5239–43. doi:10.1021/ac000530d. PMID   11080870.
  35. ↑ König, Simone; Kollas, Oliver; Dreisewerd, Klaus (1 July 2007). "Generation of Highly Charged Peptide and Protein Ions by Atmospheric Pressure Matrix-Assisted Infrared Laser Desorption/Ionization Ion Trap Mass Spectrometry". Analytical Chemistry. 79 (14): 5484–5488. doi:10.1021/ac070628t. ISSN   0003-2700. PMID   17569505.
  36. ↑ Trimpin, Sarah; Inutan, Ellen D.; Herath, Thushani N.; McEwen, Charles N. (1 January 2010). "Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry Method for Selectively Producing Either Singly or Multiply Charged Molecular Ions". Analytical Chemistry. 82 (1): 11–15. doi:10.1021/ac902066s. ISSN   0003-2700. PMID   19904915.
  37. ↑ Li, Yong Jie; Sun, Yele; Zhang, Qi; Li, Xue; Li, Mei; Zhou, Zhen; Chan, Chak K. (June 2017). "Real-time chemical characterization of atmospheric particulate matter in China: A review". Atmospheric Environment. 158: 270–304. Bibcode:2017AtmEn.158..270L. doi:10.1016/j.atmosenv.2017.02.027.
  38. ↑ Knochenmuss, R (2006). "Ion formation mechanisms in UV-MALDI". Analyst . 131 (9): 966–986. Bibcode:2006Ana...131..966K. doi:10.1039/b605646f. PMID   17047796.
  39. 1 2 Knochenmuss, Richard (2016). "The Coupled Chemical and Physical Dynamics Model of MALDI". Annual Review of Analytical Chemistry. 9 (1): 365–385. Bibcode:2016ARAC....9..365K. doi: 10.1146/annurev-anchem-071015-041750 . ISSN   1936-1327. PMID   27070182.
  40. ↑ Knochenmuss, Richard (2006). "Ion formation mechanisms in UV-MALDI". The Analyst. 131 (9): 966–86. Bibcode:2006Ana...131..966K. doi:10.1039/b605646f. ISSN   0003-2654. PMID   17047796.
  41. ↑ Karas, Michael; Glückmann, Matthias; Schäfer, Jürgen (2000). "Ionization in matrix-assisted laser desorption/ionization: singly charged molecular ions are the lucky survivors". Journal of Mass Spectrometry. 35 (1): 1–12. Bibcode:2000JMSp...35....1K. doi:10.1002/(SICI)1096-9888(200001)35:1<1::AID-JMS904>3.0.CO;2-0. ISSN   1076-5174. PMID   10633229.
  42. 1 2 McEwen, Charles N.; Larsen, Barbara S. (2015). "Fifty years of desorption ionization of nonvolatile compounds". International Journal of Mass Spectrometry. 377: 515–531. Bibcode:2015IJMSp.377..515M. doi:10.1016/j.ijms.2014.07.018. ISSN   1387-3806.
  43. ↑ Lu, I.-Chung; Lee, Chuping; Lee, Yuan-Tseh; Ni, Chi-Kung (2015). "Ionization Mechanism of Matrix-Assisted Laser Desorption/Ionization". Annual Review of Analytical Chemistry. 8: 21–39. Bibcode:2015ARAC....8...21L. doi:10.1146/annurev-anchem-071114-040315. PMID   26132345.
  44. ↑ Tsai, Ming-Tsang; Lee, Sheng; Lu, I-Chung; Chu, Kuan Yu; Liang, Chi-Wei; Lee, Chih Hao; Lee, Yuan T.; Ni, Chi-Kung (2013-05-15). "Ion-to-neutral ratio of 2,5-dihydroxybenzoic acid in matrix-assisted laser desorption/ionization". Rapid Communications in Mass Spectrometry. 27 (9): 955–963. Bibcode:2013RCMS...27..955T. doi:10.1002/rcm.6534. ISSN   1097-0231. PMID   23592197.
  45. ↑ Lu, I-Chung; Lee, Chuping; Chen, Hui-Yuan; Lin, Hou-Yu; Hung, Sheng-Wei; Dyakov, Yuri A.; Hsu, Kuo-Tung; Liao, Chih-Yu; Lee, Yin-Yu (2014). "Ion Intensity and Thermal Proton Transfer in Ultraviolet Matrix-Assisted Laser Desorption/Ionization". The Journal of Physical Chemistry B. 118 (15): 4132–4139. doi:10.1021/jp5008076. ISSN   1520-6106. PMID   24707818.
  46. ↑ Lu, I.-Chung; Chu, Kuan Yu; Lin, Chih-Yuan; Wu, Shang-Yun; Dyakov, Yuri A.; Chen, Jien-Lian; Gray-Weale, Angus; Lee, Yuan-Tseh; Ni, Chi-Kung (2015). "Ion-to-Neutral Ratios and Thermal Proton Transfer in Matrix-Assisted Laser Desorption/Ionization". Journal of the American Society for Mass Spectrometry. 26 (7): 1242–1251. Bibcode:2015JASMS..26.1242L. doi:10.1007/s13361-015-1112-3. ISSN   1044-0305. PMID   25851654. S2CID   24085468.
  47. ↑ Lee, Chuping; Lu, I.-Chung; Hsu, Hsu Chen; Lin, Hou-Yu; Liang, Sheng-Ping; Lee, Yuan-Tseh; Ni, Chi-Kung (2016). "Formation of Metal-Related Ions in Matrix-Assisted Laser Desorption Ionization". Journal of the American Society for Mass Spectrometry. 27 (9): 1491–1498. Bibcode:2016JASMS..27.1491L. doi:10.1007/s13361-016-1424-y. ISSN   1044-0305. PMID   27306427. S2CID   2139197.
  48. ↑ Trimpin, Sarah (2015). ""Magic" Ionization Mass Spectrometry". Journal of the American Society for Mass Spectrometry. 27 (1): 4–21. Bibcode:2016JASMS..27....4T. doi:10.1007/s13361-015-1253-4. ISSN   1044-0305. PMC   4686549 . PMID   26486514.
  49. ↑ Trimpin, S; Inutan, ED (2013). "Matrix Assisted Ionization in Vacuum, a Sensitive and Widely Applicable Ionization Method for Mass Spectrometry". J. Am. Soc. Mass Spectrom. 24 (5): 722–732. Bibcode:2013JASMS..24..722T. doi:10.1007/s13361-012-0571-z. PMID   23526166. S2CID   29978978.
  50. ↑ Lu, I-Chung; Chu, Kuan Yu; Lin, Chih-Yuan; Wu, Shang-Yun; Dyakov, Yuri A.; Chen, Jien-Lian; Gray-Weale, Angus; Lee, Yuan-Tseh; Ni, Chi-Kung (July 2015). "Ion-to-Neutral Ratios and Thermal Proton Transfer in Matrix-Assisted Laser Desorption/Ionization". Journal of the American Society for Mass Spectrometry. 26 (7): 1242–1251. Bibcode:2015JASMS..26.1242L. doi:10.1007/s13361-015-1112-3. ISSN   1044-0305. PMID   25851654. S2CID   24085468.
  51. ↑ Robinson, Kenneth N.; Steven, Rory T.; Race, Alan M.; Bunch, Josephine (July 2019). "The Influence of MS Imaging Parameters on UV-MALDI Desorption and Ion Yield". Journal of the American Society for Mass Spectrometry. 30 (7): 1284–1293. Bibcode:2019JASMS..30.1284R. doi:10.1007/s13361-019-02193-8. ISSN   1044-0305. PMID   30949969. S2CID   96435099.
  52. ↑ Spengler, B.; Bahr, U.; Karas, M.; Hillenkamp, F. (January 1988). "Postionization of Laser-Desorbed Organic and Inorganic Compounds in a Time of Flight Mass Spectrometer". Instrumentation Science & Technology. 17 (1–2): 173–193. Bibcode:1988IS&T...17..173S. doi:10.1080/10739148808543672. ISSN   1073-9149.
  53. ↑ Dreisewerd, Klaus (February 2003). "The Desorption Process in MALDI". Chemical Reviews. 103 (2): 395–426. doi:10.1021/cr010375i. ISSN   0009-2665. PMID   12580636.
  54. ↑ Soltwisch, J.; Kettling, H.; Vens-Cappell, S.; Wiegelmann, M.; Muthing, J.; Dreisewerd, K. (2015-04-10). "Mass spectrometry imaging with laser-induced postionization". Science. 348 (6231): 211–215. Bibcode:2015Sci...348..211S. doi: 10.1126/science.aaa1051 . ISSN   0036-8075. PMID   25745064. S2CID   206632790.
  55. ↑ Soltwisch, Jens; Heijs, Bram; Koch, Annika; Vens-Cappell, Simeon; Höhndorf, Jens; Dreisewerd, Klaus (2020-07-07). "MALDI-2 on a Trapped Ion Mobility Quadrupole Time-of-Flight Instrument for Rapid Mass Spectrometry Imaging and Ion Mobility Separation of Complex Lipid Profiles". Analytical Chemistry. 92 (13): 8697–8703. doi:10.1021/acs.analchem.0c01747. hdl: 1887/3182290 . ISSN   0003-2700. PMID   32449347. S2CID   218874538.
  56. ↑ Ellis, S. R.; Soltwisch, J.; Paine, M. R. L.; Dreisewerd, K.; Heeren, R. M. A. (2017). "Laser post-ionisation combined with a high resolving power orbitrap mass spectrometer for enhanced MALDI-MS imaging of lipids". Chemical Communications. 53 (53): 7246–7249. doi:10.1039/C7CC02325A. ISSN   1359-7345. PMID   28573274.
  57. ↑ Stacie L. Richardson; Pahul Hanjra; Gang Zhang; Brianna D. Mackie; Darrell L. Peterson; Rong Huang (2015). "A direct, ratiometric, and quantitative MALDI–MS assay for protein methyltransferases and acetyltransferases". Anal. Biochem. 478: 59–64. doi:10.1016/j.ab.2015.03.007. PMC   4855292 . PMID   25778392.
  58. ↑ Karine Guitot; Thierry Drujon; Fabienne Burlina; Sandrine Sagan; Sandra Beaupierre; Olivier Pamlard; Robert H Dodd; Catherine Guillou; Gérard Bolbach; Emmanuelle Sachon; Dominique Guianvarc'h (2017). "A direct label-free MALDI-TOF mass spectrometry based assay for the characterization of inhibitors of protein lysine methyltransferases". Analytical and Bioanalitical Chemistry. 409 (15): 3767–3777. doi:10.1007/s00216-017-0319-5. PMID   28389916. S2CID   4021309.
  59. ↑ Huberty, M. C.; Vath, J. E.; Yu, W.; Martin, S. A. (1993). "Site-specific carbohydrate identification in recombinant proteins using MALD-TOF MS". Analytical Chemistry . 65 (20): 2791–2800. doi:10.1021/ac00068a015. PMID   8250262.
  60. ↑ Sekiya, S.; Wada, Y.; Tanaka, K. (2005). "Derivatization for Stabilizing Sialic Acids in MALDI-MS". Analytical Chemistry. 77 (15): 4962–4968. doi:10.1021/ac050287o. PMID   16053310.
  61. ↑ Fukuyama, Y.; Nakaya, S.; Yamazaki, Y.; Tanaka, K. (2008). "Ionic Liquid Matrixes Optimized for MALDI-MS of Sulfated/Sialylated/Neutral Oligosaccharides and Glycopeptides". Analytical Chemistry. 80 (6): 2171–2179. doi:10.1021/ac7021986. PMID   18275166.
  62. ↑ Papac, D. I.; Wong, A.; Jones, A. J. S. (1996). "Analysis of Acidic Oligosaccharides and Glycopeptides by Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry". Analytical Chemistry. 68 (18): 3215–3223. doi:10.1021/ac960324z. PMID   8797382.
  63. ↑ Harvey, D. J. (1999). "Matrix-assisted laser desorption/ionization mass spectrometry of carbohydrates". Mass Spectrometry Reviews . 18 (6): 349–451. Bibcode:1999MSRv...18..349H. CiteSeerX   10.1.1.1012.1931 . doi:10.1002/(SICI)1098-2787(1999)18:6<349::AID-MAS1>3.0.CO;2-H. PMID   10639030.
  64. ↑ Lattova, E.; Chen, V. C.; Varma, S.; Bezabeh, T.; Perreault, H. (2007). "Matrix-assisted laser desorption/ionization on-target method for the investigation of oligosaccharides and glycosylation sites in glycopeptides and glycoproteins". Rapid Communications in Mass Spectrometry . 21 (10): 1644–1650. Bibcode:2007RCMS...21.1644L. doi:10.1002/rcm.3007. PMID   17465012.
  65. ↑ Tajiri, M.; Takeuchi, T.; Wada, Y. (2009). "Distinct Features of Matrix-Assisted 6 μm Infrared Laser Desorption/Ionization Mass Spectrometry in Biomolecular Analysis". Analytical Chemistry. 81 (16): 6750–6755. doi:10.1021/ac900695q. PMID   19627133.
  66. ↑ T. W. Jaskolla; K. Onischke; J. Schiller (2014). "2,5‐Dihydroxybenzoic acid salts for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometric lipid analysis: Simplified spectra interpretation and insights into gas‐phase fragmentation". Rapid Communications in Mass Spectrometry. 28 (12): 1353–1363. doi:10.1002/rcm.6910. PMID   24797946.
  67. ↑ J. Lee; Y.-K. Kim; D.-H. Min (2010). "Laser Desorption/Ionization Mass Spectrometric Assay for Phospholipase Activity Based on Graphene Oxide/Carbon Nanotube Double-Layer Films". Journal of the American Chemical Society. 132 (42): 14714–14717. doi:10.1021/ja106276j. PMID   20886850.
  68. ↑ Nabangshu Sharma; Ries J. Langley; Chatchakorn Eurtivong; Euphemia Leung; Ryan Joseph Dixon; Emily K. Paulin; Shaun W. P. Rees; Lisa I Pilkington; David Barker; Johannes Reynisson; Ivanhoe K. H. Leung (2021). "An optimised MALDI-TOF assay for phosphatidylcholine-specific phospholipase C". Analytical Methods. 13 (4): 491–496. doi:10.1039/D0AY02208J. PMID   33432952. S2CID   231584395.
  69. ↑ Distler, A. M.; Allison, J. (2001). "5-Methoxysalicylic acid and spermine: A new matrix for the matrix-assisted laser desorption/ionization mass spectrometry analysis of oligonucleotides". Journal of the American Society for Mass Spectrometry . 12 (4): 456–62. doi:10.1016/S1044-0305(01)00212-4. PMID   11322192. S2CID   18280663.
  70. ↑ Schrepp, W.; Pasch, H. (2003). MALDI-TOF Mass Spectrometry of Synthetic Polymers. Springer-Verlag. ISBN   978-3-540-44259-2.
  71. ↑ Nielen, M. W. F.; Malucha, S. (1997). "Characterization of polydisperse synthetic polymers by size-exclusion chromatography/matrix-assisted laser desorption/ionization time-of-flight mass spectrometry". Rapid Communications in Mass Spectrometry. 11 (11): 1194–1204. Bibcode:1997RCMS...11.1194N. doi:10.1002/(SICI)1097-0231(199707)11:11<1194::AID-RCM935>3.0.CO;2-L.
  72. ↑ Wu, K. J.; Odom, R. W. (1998). "Characterizing synthetic polymers by MALDI MS". Analytical Chemistry. 70 (13): 456A–461A. doi:10.1021/ac981910q. PMID   9666717.
  73. ↑ Schriemer, D. C.; Li, L. (1997). "Mass Discrimination in the Analysis of Polydisperse Polymers by MALDI Time-of-Flight Mass Spectrometry. 2. Instrumental Issues". Analytical Chemistry. 69 (20): 4176–4183. doi:10.1021/ac9707794.
  74. ↑ Schaiberger, Audrey M.; Moss, Jason A. (2008). "Optimized sample preparation for MALDI mass spectrometry analysis of protected synthetic peptides". Journal of the American Society for Mass Spectrometry. 19 (4): 614–619. doi: 10.1016/j.jasms.2008.01.010 . ISSN   1044-0305. PMID   18295503. S2CID   5305444.
  75. ↑ Bahr, Ute; Deppe, Andreas; Karas, Michael; Hillenkamp, Franz; Giessmann, Ulrich (1992). "Mass spectrometry of synthetic polymers by UV-matrix-assisted laser desorption/ionization". Analytical Chemistry. 64 (22): 2866–2869. doi:10.1021/ac00046a036. ISSN   0003-2700.
  76. ↑ Seng, P.; Drancourt, M.; Gouriet, F.; La Scola, B.; Fournier, P. E.; Rolain, J. M.; Raoult, D. (2009). "Ongoing revolution in bacteriology: routine identification of bacteria by matrix-assisted laser desorption ionization time-of-flight mass spectrometry". Clinical Infectious Diseases . 49 (4): 552–3. doi: 10.1086/600885 . PMID   19583519.
  77. ↑ Sandrin, Todd R.; Goldstein, Jason E.; Schumaker, Stephanie (2013). "MALDI TOF MS profiling of bacteria at the strain level: A review". Mass Spectrometry Reviews. 32 (3): 188–217. Bibcode:2013MSRv...32..188S. doi:10.1002/mas.21359. ISSN   0277-7037. PMID   22996584.
  78. ↑ Downard, Kevin M. (2013). "Proteotyping for the rapid identification of influenza virus and other biopathogens". Chemical Society Reviews. 42 (22): 8584–8595. doi:10.1039/c3cs60081e. ISSN   1460-4744. PMID   23632861.
  79. ↑ Capocefalo M., Ridley E. V., Tranfield E. Y. & Thompson K. C. (2015). "Ch. 9 - MALDI-TOF: A rapid microbiological confirmation technique for food and water analysis". In Cook N.; D'Agostino M.; Thompson K. C. (eds.). Molecular Microbial Diagnostic Methods - Pathways to Implementation for the Food and Water Industries. Elsevier. ISBN   978-0-12-416999-9.{{cite book}}: CS1 maint: multiple names: authors list (link)
  80. ↑ Seon Young Kim; Jeong Su Park; Yun Ji Hong; Taek Soo Kim; Kiho Hong; Kyoung-Ho Song; Hyunju Lee; Eu Suk Kim; Hong Bin Kim; Kyoung Un Park; Junghan Song; Sun Hoe Koo; Eui-Chong Kim (2019). "Microarray-Based Nucleic Acid Assay and MALDI-TOF MS Analysis for the Detection of Gram-Negative Bacteria in Direct Blood Cultures". American Journal of Clinical Pathology. 151 (2): 143–153. doi: 10.1093/AJCP/AQY118 . PMID   30383194.
  81. ↑ Rhoads, DD (2016). "The presence of a single MALDI-TOF mass spectral peak predicts methicillin resistance in staphylococci. et al.". Diagn Microbiol Infect Dis. 86 (3): 257–261. doi:10.1016/j.diagmicrobio.2016.08.001. PMID   27568365.
  82. ↑ Vogne, C.; et al. (2014). ""A simple, robust and rapid approach to detect carbapenemases in Gram-negative isolates by MALDI-TOF mass spectrometry" validation with triple quadripole tandem mass spectrometry, microarray and PCR". Clin Microbiol Infect. 20 (12): O1106-12. doi: 10.1111/1469-0691.12715 . PMID   24930405.
  83. ↑ Abouseada, N; Raouf, M; El-Attar, E; Moez, P (2017). "Matrix-assisted laser desorption ionisation time-of-flight mass spectrometry rapid detection of carbapenamase activity in Acinetobacter baumannii isolates". Indian J Med Microbiol. 35 (1): 85–89. doi: 10.4103/0255-0857.202335 . PMID   28303824. S2CID   20480725.
  84. ↑ Sakarikou, C; Ciotti, M; Dolfa, C; Angeletti, S; Favalli, C (2017). "Rapid detection of carbapenemase-producing Klebsiella pneumoniae strains derived from blood cultures by Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry (MALDI-TOF MS)". BMC Microbiol. 17 (1): 54. doi: 10.1186/s12866-017-0952-3 . PMC   5343375 . PMID   28274205.
  85. ↑ Lau, A.; et al. (August 2014). "A Rapid Matrix-Assisted Laser Desorption Ionization–Time of Flight Mass Spectrometry-Based Method for Single-Plasmid Tracking in an Outbreak of Carbapenem-Resistant Enterobacteriaceae". Journal of Clinical Microbiology. 52 (8): 2804–2812. doi: 10.1128/JCM.00694-14 . PMC   4136129 . PMID   4136129. S2CID   43633405.
  86. ↑ Avila, C. C.; Almeida, F. G.; Palmisano, G. (2016). "Direct identification of trypanosomatids by matrix-assisted laser desorption ionization-time of flight mass spectrometry (DIT MALDI-TOF MS)". Journal of Mass Spectrometry. 51 (8): 549–557. Bibcode:2016JMSp...51..549A. doi:10.1002/jms.3763. ISSN   1076-5174. PMID   27659938.
  87. ↑ Lachaud, Laurence; Fernández-Arévalo, Anna; Normand, Anne-Cécile; Lami, Patrick; Nabet, Cécile; Donnadieu, Jean Luc; Piarroux, Martine; Djenad, Farid; Cassagne, Carole; Ravel, Christophe; Tebar, Silvia; Llovet, Teresa; Blanchet, Denis; Demar, Magalie; Harrat, Zoubir; Aoun, Karim; Bastien, Patrick; Muñoz, Carmen; Gállego, Montserrat; Piarroux, Renaud; Loeffelholz, Michael J. (2017). "Identification of Leishmania by Matrix-Assisted Laser Desorption Ionization–Time of Flight (MALDI-TOF) Mass Spectrometry Using a Free Web-Based Application and a Dedicated Mass-Spectral Library". Journal of Clinical Microbiology. 55 (10): 2924–2933. doi:10.1128/JCM.00845-17. ISSN   0095-1137. PMC   5625378 . PMID   28724559.
  88. ↑ Laroche, Maureen; Almeras, Lionel; Pecchi, Emilie; Bechah, Yassina; Raoult, Didier; Viola, Angèle; Parola, Philippe (2017). "MALDI-TOF MS as an innovative tool for detection of Plasmodium parasites in Anopheles mosquitoes". Malaria Journal. 16 (1): 5. doi: 10.1186/s12936-016-1657-z . ISSN   1475-2875. PMC   5209920 . PMID   28049524.
  89. ↑ Ouarti, Basma; Laroche, Maureen; Righi, Souad; Meguini, Mohamed Nadir; Benakhla, Ahmed; Raoult, Didier; Parola, Philippe (2020). "Development of MALDI-TOF mass spectrometry for the identification of lice isolated from farm animals". Parasite. 27: 28. doi:10.1051/parasite/2020026. ISSN   1776-1042. PMC   7191974 . PMID   32351208. Open Access logo PLoS transparent.svg
  90. ↑ Huguenin, Antoine; Depaquit, Jérôme; Villena, Isabelle; Ferté, Hubert (2019). "MALDI-TOF mass spectrometry: a new tool for rapid identification of cercariae (Trematoda, Digenea)". Parasite. 26: 11. doi:10.1051/parasite/2019011. ISSN   1776-1042. PMC   6402365 . PMID   30838972. Open Access logo PLoS transparent.svg
  91. ↑ Sim, K.; Shaw, A. G.; Randell, P.; Cox, M. J.; McClure, Z. E.; Li, M. S.; Haddad, M.; Langford, P. R.; Cookson, W. O.; Moffatt, M. F.; Kroll, J. S. Dysbiosis anticipating necrotizing enterocolitis in very premature infants. Clin. Infect. Dis. 2014.
  92. ↑ Grantzdorffer, I; Carl-McGrath, S; Ebert, MP; Rocken, C (2008). "Proteomics of pancreatic cancer". Pancreas. 36 (4): 329–36. doi:10.1097/MPA.0b013e31815cc452. PMID   18437077. S2CID   29118712.
  93. ↑ Dhillon, AS; Hagan, S; Rath, O; Kolch, W (2007). "MAP kinase signalling pathways in cancer". Oncogene. 26 (22): 3279–90. doi: 10.1038/sj.onc.1210421 . PMID   17496922. S2CID   17464318.
  94. ↑ Zhong, N.; Cui, Y.; Zhou, X.; Li, T.; Han, J. Identification of prohibitin 1 as a potential prognostic biomarker in human pancreatic carcinoma using modified aqueous two-phase partition system combined with 2D-MALDI-TOF-TOF-MS/MS. Tumour Biol. 2014.
  95. ↑ Hrabák, Jaroslav (2015). "Detection of Carbapenemases Using Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS) Meropenem Hydrolysis Assay". Methods in Molecular Biology (1064-3745), 1237, p. 91.
  96. ↑ Woods, AS; Buchsbaum, JS; Worrall, TA; Berg, JM; Cotter, RJ (1995). "Matrix-Assisted Laser Desorption/Ionization of Non-covalently Bound Compounds". Anal. Chem. 67 (24): 4462–4465. doi:10.1021/ac00120a005.
  97. ↑ Kiselar, JJG; Downard, KM (2000). "Preservation and Detection of Specific Antibody-Peptide Complexes by Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry". J. Am. Soc. Mass Spectrom. 11 (8): 746–750. doi:10.1016/S1044-0305(00)00144-6. PMID   10937798. S2CID   33248551.
  98. ↑ Downard, KM (2006). "Softly, Softly—Detection of Protein Complexes by Matrix‐Assisted Laser Desorption Ionization Mass Spectrometry". Mass Spectrometry of Protein Interactions. Wiley. pp. 25–43. doi:10.1002/9780470146330.ch2. ISBN   9780470146330.
  99. ↑ Bergman, Nina; Shevchenko, Denys; Bergquist, Jonas (January 2014). "Approaches for the analysis of low molecular weight compounds with laser desorption/ionization techniques and mass spectrometry". Analytical and Bioanalytical Chemistry. 406 (1): 49–61. doi:10.1007/s00216-013-7471-3. ISSN   1618-2642.
  100. ↑ Calvano, Cosima Damiana; Monopoli, Antonio; Cataldi, Tommaso R. I.; Palmisano, Francesco (July 2018). "MALDI matrices for low molecular weight compounds: an endless story?". Analytical and Bioanalytical Chemistry. 410 (17): 4015–4038. doi:10.1007/s00216-018-1014-x. ISSN   1618-2642.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.