Mini Scamp

Last updated

Mk3 Mini Scamp Great example of a Mini Scamp.JPG
Mk3 Mini Scamp

The Mini Scamp is a Mini based kit car inspired by the Mini Moke, manufactured by Andrew MacLean and the Scamp Motor Company in West Sussex. The Mk1 Mini Scamp was built in 1969. Shortly thereafter, BMC stopped production of the Mini Moke in Longbridge.

The first Mark 1 kits, which were styled similarly to the Mini Moke, were produced by Robert Mandry in Ottershaw, Surrey, England. Parts from a Classic Mini were used with all its running gear and both front and rear sub-frames.

The Scamp body/chassis is made from a steel, square-tube, box section frame fitted with aluminum panels. Options included a van, estate, or pick-up body, four or six wheel chassis, and short or long wheelbase. Power units range from 850cc to 1400cc with a multitude of modifications. Nearly every Scamp is different, as most of the car is left up to the owner to complete.

The Mark 2 version was launched in 1978, which had a squarer body and stronger chassis, not using the mini rear subframe. In 1987 Scamp manufacturing and ownership was taken over by Scamp enthusiast Andrew MacLean, a retained firefighter from Turners Hill. A factory was set up in East Grinstead, Sussex but was moved to Rowfant, Crawley, Sussex.

The Mark 3 version started production in 1988 with demonstrator appearing in Kit Car and Mini magazines. The Scamp Mk3 GT Scamp appeared in Top Gear magazine. This was followed by a version built on either a Suzuki SJ chassis or the Daihatsu F50/F55. In 2011 the Scamp Motor Company acquired the manufacturing rights to the RTV, the Rough Terrain Vehicle, also based on the Classic Mini running gear.

Related Research Articles

<span class="mw-page-title-main">Mini</span> British car model from 1959 to 2000

The Mini is a small, two-door, four-seat car, developed as ADO15, and produced by the British Motor Corporation (BMC) and its successors, from 1959 through 2000. Minus a brief hiatus, original Minis were built for four decades and sold during six, from the last year of the 1950s into the last year of the 20th century, over a single generation, as fastbacks, estates, and convertibles.

<span class="mw-page-title-main">Reliant Motors</span> British car manufacturer in Tamworth, Staffordshire

Reliant Motor Company was a British car manufacturer based in Tamworth, Staffordshire, England. It was founded in 1935 and ended car production in 2002, the company had been known as "Reliant Motor Company" until the 1990s when it became "Reliant Motors" and then finally became "Reliant cars LTD" after production had ended of the Robin as the company was restructured to be a car import business. It's now a dormant company and the only entity left is a separate parts company created called Reliant Partsworld who produce parts for Reliant vehicles.

<span class="mw-page-title-main">Austin-Healey Sprite</span> Motor vehicle

The Austin-Healey Sprite is a small open sports car produced in the United Kingdom from 1958 until 1971. The Sprite was announced to the press in Monte Carlo by the British Motor Corporation on 20 May 1958, two days after that year's Monaco Grand Prix. It was intended to be a low-cost model that "a chap could keep in his bike shed", yet be the successor to the sporting versions of the pre-war Austin Seven. The Sprite was designed by the Donald Healey Motor Company, with production being undertaken at the MG factory at Abingdon. It first went on sale at a price of £669, using a tuned version of the Austin A-Series engine and as many other components from existing cars as possible to keep costs down.

<span class="mw-page-title-main">Marcos Engineering</span> British sports car manufacturer

Marcos Engineering was a British sports car manufacturer. The name derives from the surnames of founders Jem Marsh and Frank Costin.

<span class="mw-page-title-main">Hillman Imp</span> Motor vehicle

The Hillman Imp is a small economy car that was made by the Rootes Group and its successor Chrysler Europe from 1963 until 1976. Revealed on 3 May 1963, after much advance publicity, it was the first British mass-produced car with the engine block and cylinder head cast in aluminium.

<span class="mw-page-title-main">Ford Consul Classic</span> Motor vehicle

The Ford Consul Classic is a mid-sized car that was launched in May 1961 and built by Ford UK from 1961 to 1963. It was available in two or four door saloon form, in Standard or De Luxe versions, and with floor or column gearshift. The name Ford Consul 315 was used for export markets. The Ford Consul Capri was a 2-door coupé version of the Classic, and was available from 1961 until 1964.

The AEM Scout was a Welsh-built Mini Moke type utility vehicle, with, zinc-coated bodywork and totally different styling not to mention the radically different method of production. It was made for only one year, 1987, in Merthyr Tydfil, South Wales. The running gear was based on the Mini, with a Mini engine, transmission, front subframe and Hydragas suspension.

<span class="mw-page-title-main">Mini Moke</span> British small utility vehicle

The Mini Moke is a small, front-wheel-drive utility and recreational convertible, conceived and manufactured as a lightweight military vehicle by British Motor Corporation (BMC), and subsequently marketed for civilian use under the Austin, Morris, Leyland, and MOKE brands. The name "Mini Moke" combines Mini with Moke, an archaic term for "mule".

<span class="mw-page-title-main">Elva (car manufacturer)</span> Motor vehicle

Elva was a sports and racing car manufacturing company based in Bexhill, then Hastings and Rye, East Sussex, United Kingdom. The company was founded in 1955 by Frank G. Nichols. The name comes from the French phrase elle va.

<span class="mw-page-title-main">Gilbern</span> Motor vehicle

Gilbern, Gilbern Sports Cars (Components) Ltd , was a Welsh car manufacturer from 1959 to 1973, based in Llantwit Fardre, Pontypridd, Glamorgan, Wales.

<span class="mw-page-title-main">Unipower GT</span> Motor vehicle

The Unipower GT is a British specialist sports car that debuted at the January 1966 Racing Car Show. It uses the powertrain from the BMC Mini mounted amidships. Production lasted until the end of 1969.

<span class="mw-page-title-main">Falcon Shells</span>

Falcon Shells was a British company that produced specials/kit cars from 1956 until 1964.

Fiberfab was an American automotive manufacturer established in 1964. Starting with accessories and body parts, they progressed to making kit cars and fully assembled automobiles. They became one of the longest lasting kit car manufacturers.

<span class="mw-page-title-main">Quantum Sports Cars</span>

Quantum Sports Cars was founded by Mark and Harvey Wooldridge in 1987.

British Motor Corporation (Australia) was a motor manufacturing company formed in Australia in 1954 by the merger of the Austin Motor Company (Australia) and Nuffield (Australia). This followed the merger in 1952 of the Austin Motor Company and the Nuffield Group in the United Kingdom to form the British Motor Corporation. Following further corporate changes in the UK in the late 1960s, BMC Australia was absorbed into the newly established British Leyland Motor Corporation of Australia, the name of which became Leyland Motor Corporation of Australia in 1972, and then JRA Limited in March 1983.

<span class="mw-page-title-main">Meadows Frisky</span> Motor vehicle

Meadows Frisky is the name of a series of small British cars manufactured at the factory of Henry Meadows Ltd at Fallings Park in Wolverhampton between 1958 and 1961, during which time, production was under the control of a number of companies.

Mills Extreme Vehicles (MEV) is a kit car design and manufacturing company based in Gloucestershire, England, founded in 2003.

<span class="mw-page-title-main">Kit and replica cars of New Zealand</span>

New Zealand had a long history of small garages and vehicle enthusiasts modifying and creating sports and sports racing cars. Out of these interests grew the New Zealand kit and replica car industry with the introduction of fibre-glass car bodies in the 1950s.

The BS Nymph was a fibreglass monocoque British buggy based on running gear from the Hillman Imp, including its rear-mounted 875 cc engine. While meant by Chrysler UK to enter series production to the tune of 4000 cars per annum, the Chrysler corporation discontinued the Imp before the Nymph was released. Rather than competing globally with the Mini Moke as intended, the Nymph entered small-scale production as a kit car and only 42 cars were finished. The designers, Peter Bohanna and Robin Stables, are perhaps best known for having designed the "Diablo GT", which later was developed into the AC 3000ME.

References