Payload Operations and Integration Center

Last updated
The Payload Operations Control Room in the Huntsville Operations Support Center, Marshall Space Flight Center PCA1.jpg
The Payload Operations Control Room in the Huntsville Operations Support Center, Marshall Space Flight Center

The Payload Operations and Integration Center, part of the Huntsville Operations Support Center (HOSC), radio callsign Huntsville, or the Payload Operations Center, is a National Aeronautics and Space Administration (NASA) facility located at the Marshall Space Flight Center in Huntsville, Alabama. It is the headquarters for the science operations of the International Space Station (ISS), working in conjunction with the ISS control center in Houston, Texas. The Payload Operations Center links Earth-bound researchers and developers from around the world with their experiments and astronauts on board the ISS.

Contents

The everyday tasks performed at the center during the life of the ISS include:

The Payload Operations Center is staffed around the clock by three shifts of flight controllers.

Payload Operations Center

Console Positions

A total of eight flight controllers staff the Payload Operations Center front room. They are:

Payload Operations Director (POD)

The POD manages day-to-day operations of payloads on board the space station. This position is the single point-of-authority to the International Space Station Mission Control Center Flight Director in Houston for all of NASA's payload operations. The POD oversees team members responsible for managing payload mission planning, ground commanding of space station payloads, communications with the crew, use of the payload support system, the video system and the data systems. The POD ensures compliance with established safety requirements, flight rules and payload regulations. The POD also leads the review and approval of all change requests to the timeline.

Operations Controller (OC)

The Operations Controller leads a team that is responsible for maintaining the daily payload work assignments; ensuring scheduled research activities are accomplished safely and on time, and managing and tracking available resources.

The OC leads resolution of NASA payload anomalies, and monitors troubleshooting of on board systems to identify possible impacts to payload operations. The position assesses change requests for impacts to the current science timeline, payload hardware assets and resources required for science such as crew time and electrical power. The OC also is responsible for evaluating requests by scientists for changes to the experiment timeline, and then implementing changes to the science operations plan on board.

Payload Rack Officer (PRO)

The PRO is responsible for the configuration of ExPRESS payload racks in the International Space Station's US Lab, JEM, and Columbus modules, and for coordinating the configuration of systems resources to all NASA payload racks. When a new payload is installed, the PRO configures the rack interfaces to properly support the payload. For existing payloads, the PRO configures the EXPRESS racks to power payloads on or off, monitors the health and status of both the payload and the rack and if necessary, coordinates troubleshooting of the payload support structure and payload interfaces.

The PRO also is responsible for managing all ground commanding of U. S. payload systems and experiments on board the International Space Station. The PRO manages the command system, receives and sends command files to the mass storage device and configures the system to allow flight controllers in the Payload Operations Center and remote users to send commands to their equipment on the space station.

Data Management Coordinator (DMC)

The Data Management Coordinator is responsible for command, control, data handling, communications and tracking for science payloads on the space station. The DMC manages the integrated high data rate (Ku-band) communications link between the ground and the station. This position manages data system traffic, downlink video, assures ground data quality with NASA users, and assesses data system change requests. The DMC ensures that the data system is properly configured to support payload operations. The DMC also is responsible for managing video coverage of research activity on the station. The DMC monitors, configures and coordinates the use of the video system.

Payload Communications Manager (PAYCOM)

The PAYCOM, using the call sign, "Huntsville," is the prime communicator with the International Space Station astronaut crew on payload matters. The PAYCOM is responsible for enabling researchers around-the-world to talk directly with the crew about their experiments, and for managing payload conferences. Additionally, the PAYCOM reviews requests for changes to payload activity to assess their impact on the crew.

POIC Stowage

The POIC Stowage console position is responsible for tracking the stowage locations of payload hardware, tools, and items on the International Space Station. This console position develops products that ensure the ISS crew knows where to locate every item they need for their day to day experiments, and helps maintain an inventory database for accurate tracking of those items. They also support the crew by helping them locate missing items. When the crew calls down and reports an item lost, the POIC Stowage console conducts investigations using video, imagery, and many other resources to come up with alternate search locations. The Stowage Team maintains a high level of situational awareness and knowledge of the current layout of station to ensure the crew can always find what they need to perform payload ops successfully.

Marshall GC (GC)

The Marshall GC (Marshall Ground Control) is responsible for troubleshooting ground system issues as the ground system expert. Marshall GC leads troubleshooting of real time commanding, telemetry, communication, and facility issues.

Other duties that Marshall GC perform are coordinating payload video restrictions, space-to-ground enablement, space-to-ground restrictions, and ground system maintenance. If payload developers have any ground system issues, Marshall GC is the real time coordinator to resolve such issues.

As the ground system expert, Marshall GC is the HOSC interface for Backup Control Center (BCC) operations.

Timeline Change Officer (TCO)

The Timeline Change Officer (TCO) serves as the real-time expert on all NASA payload planning-related information for the International Space Station. Coordinating with NASA control centers, International Partners, and NASA Payload Developers, the TCO bridges the gap between long range planning and execution of the plan on board by the crew. The TCO team supports real-time operations seven days a week, twenty-four hours per day; in addition, short term planning operations are supported five days a week, eight hours per day.

See also

Related Research Articles

<span class="mw-page-title-main">Marshall Space Flight Center</span> Rocketry and spacecraft propulsion research center

The George C. Marshall Space Flight Center (MSFC), located in Redstone Arsenal, Alabama, is the U.S. government's civilian rocketry and spacecraft propulsion research center. As the largest NASA center, MSFC's first mission was developing the Saturn launch vehicles for the Apollo program. Marshall has been the lead center for the Space Shuttle main propulsion and external tank; payloads and related crew training; International Space Station (ISS) design and assembly; computers, networks, and information management; and the Space Launch System. Located on the Redstone Arsenal near Huntsville, MSFC is named in honor of General of the Army George C. Marshall.

<i>Columbus</i> (ISS module) ESA science observatory on the International Space Station

Columbus is a science laboratory that is part of the International Space Station (ISS) and is the largest single contribution to the ISS made by the European Space Agency (ESA).

<span class="mw-page-title-main">Jan Davis</span> American engineer and astronaut

Nancy Jan Davis is a former American astronaut. A veteran of three space flights, Davis logged over 673 hours in space. She is now retired from NASA.

<span class="mw-page-title-main">STS-60</span> 1994 American crewed spaceflight

STS-60 was the first mission of the U.S./Russian Shuttle-Mir Program, which carried Sergei K. Krikalev, the first Russian cosmonaut to fly aboard a Space Shuttle. The mission used NASA Space Shuttle Discovery, which lifted off from Launch Pad 39A on February 3, 1994, from Kennedy Space Center, Florida. The mission carried the Wake Shield Facility experiment and a SPACEHAB module, developed by SPACEHAB Inc., into orbit, and carried out a live bi-directional audio and downlink link-up with the cosmonauts aboard the Russian space station Mir.

<span class="mw-page-title-main">STS-105</span> 2001 American crewed spaceflight to the ISS

STS-105 was a mission of the Space Shuttle Discovery to the International Space Station, launched from Kennedy Space Center, Florida, 10 August 2001. This mission was Discovery's final mission until STS-114, because Discovery was grounded for a refit, and then all Shuttles were grounded in the wake of the Columbia disaster. The refit included an update of the flight deck to the glass cockpit layout, which was already installed on Atlantis and Columbia.

<span class="mw-page-title-main">Mission control center</span> Facility that manages aerospace vehicle flights

A mission control center is a facility that manages space flights, usually from the point of launch until landing or the end of the mission. It is part of the ground segment of spacecraft operations. A staff of flight controllers and other support personnel monitor all aspects of the mission using telemetry, and send commands to the vehicle using ground stations. Personnel supporting the mission from an MCC can include representatives of the attitude control system, power, propulsion, thermal, attitude dynamics, orbital operations and other subsystem disciplines. The training for these missions usually falls under the responsibility of the flight controllers, typically including extensive rehearsals in the MCC.

<i>Destiny</i> (ISS module) Primary US ISS module

The Destiny module, also known as the U.S. Lab, is the primary operating facility for U.S. research payloads aboard the International Space Station (ISS). It was berthed to the Unity module and activated over a period of five days in February, 2001. Destiny is NASA's first permanent operating orbital research station since Skylab was vacated in February 1974.

<span class="mw-page-title-main">Flight controller</span> Person who aids in spaceflight activities

Flight controllers are personnel who aid space flight by working in such Mission Control Centers as NASA's Mission Control Center or ESA's European Space Operations Centre. Flight controllers work at computer consoles and use telemetry to monitor various technical aspects of a space mission in real-time. Each controller is an expert in a specific area and constantly communicates with additional experts in the "back room". The flight director, who leads the flight controllers, monitors the activities of a team of flight controllers, and has overall responsibility for success and safety.

<span class="mw-page-title-main">STS-128</span> 2009 American crewed spaceflight to the ISS

STS-128 was a NASA Space Shuttle mission to the International Space Station (ISS) that launched on August 28, 2009. Space ShuttleDiscovery carried the Multi-Purpose Logistics Module Leonardo as its primary payload. Leonardo contained a collection of experiments for studying the physics and chemistry of microgravity. Three spacewalks were carried out during the mission, which removed and replaced a materials processing experiment outside ESA's Columbus module, and returned an empty ammonia tank assembly.

<span class="mw-page-title-main">STS-131</span> 2010 American crewed spaceflight to the ISS

STS-131 was a NASA Space Shuttle mission to the International Space Station (ISS). Space ShuttleDiscovery launched on April 5, 2010, at 6:21 am from LC-39A, and landed at 9:08 am on April 20, 2010, on runway 33 at the Kennedy Space Center's Shuttle Landing Facility. The mission marked the longest flight for Space Shuttle Discovery.

<span class="mw-page-title-main">Columbus Control Centre</span>

The Columbus Control Centre also known by its radio callsign, Mission Control Munich, is the mission control centre which is used to control the Columbus research laboratory, which is part of the International Space Station (ISS). The control centre is located at the German Aerospace Center (DLR) facility in Oberpfaffenhofen near Munich, Germany. The centre is operated by the DLR, under contract from the European Space Agency (ESA).

<span class="mw-page-title-main">Christopher C. Kraft Jr. Mission Control Center</span> United States historic place in Houston, Texas

NASA's Christopher C. Kraft Jr. Mission Control Center, also known by its radio callsign, Houston, is the facility at the Lyndon B. Johnson Space Center in Houston, Texas, that manages flight control for the United States human space program, currently involving astronauts aboard the International Space Station (ISS). The center is in Building 30 at the Johnson Space Center and is named after Christopher C. Kraft Jr., a NASA engineer and manager who was instrumental in establishing the agency's Mission Control operation, and was the first Flight Director.

<span class="mw-page-title-main">STS-135</span> 2011 American crewed spaceflight to the ISS and final flight of the Space Shuttle program

STS-135 was the 135th and final mission of the American Space Shuttle program. It used the orbiter Atlantis and hardware originally processed for the STS-335 contingency mission, which was not flown. STS-135 launched on July 8, 2011, and landed on July 21, 2011, following a one-day mission extension. The four-person crew was the smallest of any shuttle mission since STS-6 in April 1983. The mission's primary cargo was the Multi-Purpose Logistics Module (MPLM) Raffaello and a Lightweight Multi-Purpose Carrier (LMC), which were delivered to the International Space Station (ISS). The flight of Raffaello marked the only time that Atlantis carried an MPLM.

<span class="mw-page-title-main">Kounotori 2</span> 2011 Japanese resupply spaceflight to the ISS

Kounotori 2, also known as HTV-2, was launched in January 2011 and was the second flight of the Japanese H-II Transfer Vehicle to resupply the International Space Station (ISS). It was launched by the H-IIB Launch Vehicle No. 2 manufactured by Mitsubishi Heavy Industries (MHI) and JAXA. After the supplies were unloaded, Kounotori 2 was loaded with waste material from ISS, including used experiment equipment and used clothes. Kounotori 2 was then unberthed and separated from the ISS and burned up upon reentering the atmosphere on 30 March 2011.

<span class="mw-page-title-main">US Orbital Segment</span> US components of the International Space Station

The US Orbital Segment (USOS) is the name given to the components of the International Space Station (ISS) constructed and operated by the United States National Aeronautics and Space Administration (NASA), European Space Agency (ESA), Canadian Space Agency (CSA) and Japan Aerospace Exploration Agency (JAXA). The segment consists of eleven pressurized components and various external elements, almost all of which were delivered by the Space Shuttle.

<span class="mw-page-title-main">European Drawer Rack</span> Payload rack installed in the Columbus lab of the ISS

The European Drawer Rack (EDR) is a single, six-post International Standard Payload Rack (ISPR) with seven Experiment Modules (EMs), each of which has separate access to power and cooling. A video management unit sends streaming video, images, and science data to Earth via the Columbus module's high-rate data link and can temporarily store 72 GB of video. The experiments are largely autonomous to minimize data transfer requirements, though the EDR can be operated remotely via telescience or in real time by the crew via a dedicated laptop. The EDR has two different types of EMs: the standard International Space Station locker and the standard eight panel unit International Subrack Interface Standard (ISIS) drawer.

<span class="mw-page-title-main">Window Observational Research Facility</span> Experiment rack facility manufactured by the Brazilian Space Agency

The Window Observational Research Facility (WORF) is an experiment rack facility manufactured by the Brazilian Space Agency, which remotely operated payloads and crew members can perform Earth and space science research, including hand held photography, at the U.S. Laboratory Science Window on the International Space Station. WORF is based on an International Standard Payload Rack (ISPR) and utilizes avionics and hardware adapted from the EXPRESS Rack program. The rack provides a payload volume equivalent to 0.8 m3 (28 cu ft), and will be able to support up to three payloads simultaneously, depending on available resources and space available at the window. The WORF will also provide access and equipment for crew Earth observations, such as crew restraints, camera/camcorder brackets, and condensation prevention. WORF payloads include those focusing on geology, agriculture, ranching, environmental and coastal changes, and education.

<span class="mw-page-title-main">Human Research Facility 1</span>

Human Research Facility 1 (HRF-1) on board the International Space Station (ISS) allows investigators to study the effects of long-duration space flight on the human body. Equipment in the HRF-1 includes a clinical ultrasound and a device for measuring mass.

<span class="mw-page-title-main">Cygnus NG-13</span> 2020 American resupply spaceflight to the ISS

NG-13, previously known as OA-13, was the fourteenth flight of the Northrop Grumman robotic resupply spacecraft Cygnus and its thirteenth flight to the International Space Station (ISS) under the Commercial Resupply Services (CRS-1) contract with NASA. The mission launched on 15 February 2020 at 20:21:01 UTC after nearly a week of delays. This is the second launch of Cygnus under the CRS-2 contract.

<span class="mw-page-title-main">Cygnus NG-16</span> 2021 American resupply spaceflight to the ISS

Cygnus NG-16, previously known as Cygnus OA-16, was the sixteenth flight of the Northrop Grumman robotic resupply spacecraft Cygnus and its fifteenth flight to the International Space Station (ISS) under the Commercial Resupply Services (CRS-2) contract with NASA. The mission was launched on 10 August 2021 at 22:01:05 UTC, for a (planned) 90-day mission at the ISS. This was the fifth launch of Cygnus under the CRS-2 contract.

References