Smith & Wesson Model 5906

Last updated
S&W Model 5906
Smith and Wesson Model 5906.jpg
Type Semi-automatic pistol
Place of origin United States
Service history
In service1990-present
Production history
Manufacturer Smith & Wesson
Produced1989–1999
Specifications
Mass1070 g (38.3 oz)
Length191 mm (7.5 in)
Barrel  length102 mm (4 in)

Cartridge 9×19mm Parabellum
Action Double/single action
Feed system10- and 15- round magazine
Sights3-dot adjustable

The Smith & Wesson 5906 is a pistol manufactured starting in 1988 by Smith & Wesson.

Contents

Design

The 5906 is a full-sized, double/single-action (DA/SA), staggered-column magazine, 9×19mm pistol. Its construction is all stainless steel. The 5906 is equipped with a magazine disconnect feature which is designed to deactivate the trigger if the magazine is not fully inserted. The pistol comes standard with either a 10- or 15-round magazine. Other features include ambidextrous safety levers, a one-piece rear wraparound grip, and a choice of either fixed sights or a rear sight fully adjustable for windage and elevation. Once a very popular model with law enforcement and military units in the United States, the DA/SA 5906 has been superseded by polymer-framed striker-fired models from Glock, Heckler & Koch, SIG Sauer as well as Smith & Wesson's own M&P line of polymer framed handguns in both 9mm and .40 calibers. [1]

Variants

The first generation Smith & Wesson semi-auto pistol designations consist of two digits, such as Smith & Wesson Model 39 and Model 59. Second generation pistols are designated by three digits; these include the Model 459, Model 659, etc. Many second generation designs were eventually upgraded with various improvements, thus becoming the third generation pistols; these are identified by the addition of a fourth digit to the second generation model number: 5903, 5904, 5905, 5906, etc. [1] However, there are exceptions to this numbering scheme, namely the third generation Value Series pistols such as the S&W Models 915 and 910, and the Model 457.

5900 series manufacturing history

5906TSW Smith & Wesson 5906TSW.jpg
5906TSW

Users

Related Research Articles

<span class="mw-page-title-main">Smith & Wesson</span> American manufacturer of firearms and ammunition

Smith & Wesson Brands, Inc. (S&W) is an American firearm manufacturer headquartered in Maryville, Tennessee, United States.

<span class="mw-page-title-main">Smith & Wesson Model 1006</span> Semi-automatic handgun

The Smith & Wesson Model 1006 is a recoil operated double-action/single-action semi-automatic handgun chambered in the 10mm Auto cartridge manufactured by Smith & Wesson.

<span class="mw-page-title-main">Smith & Wesson Model 469</span> Semi-automatic pistol

The Smith & Wesson Model 469 is a semi-automatic pistol, chambered for the 9mm cartridge.

<span class="mw-page-title-main">Ruger P series</span> Semi-automatic pistol

The Ruger P series is a line of centerfire semi-automatic pistols made by Sturm, Ruger & Company produced from 1985 to 2013. The P-series pistols were designed for military, police, civilian and recreational use. The designs are largely based on the Browning action found in the M1911 pistol, but with minor variations, generally related to the safety mechanism and the barrel-camblock interface. Reviews have considered them rugged, reliable, and strong, though this strength comes at the price of bulk and a blocky appearance.

<span class="mw-page-title-main">Smith & Wesson Model 910</span> Semi-automatic pistol

The Smith & Wesson Models 908, 908s, 909, 910, and 915 are 9×19mm Parabellum, short-recoil-operated double-action/single action (DA/SA) semi-automatic pistols Value Series pistols. All of these pistols utilize a stainless barrel, an aluminum alloy frame, and either a carbon steel or stainless steel slide. The S&W Model 915 was produced from 1992 to 1994, while the S&W Model 910 was introduced in 1995 as a replacement for the Model 915 and was manufactured through 2006.

<span class="mw-page-title-main">Smith & Wesson Model 39</span> Semi-automatic pistol

The Smith & Wesson Model 39 is a semi-automatic pistol developed for the United States Army service pistol trials of 1954. After the Army abandoned its search for a new pistol, the Model 39 went on the civilian market in 1955 and was the first of Smith & Wesson's first generation semi-automatic pistols.

<span class="mw-page-title-main">Smith & Wesson Model 4006</span> Handgun

The S&W Model 4006 is a semi-automatic handgun introduced by Smith & Wesson on January 17, 1990 along with the new .40 S&W cartridge. It is a 3rd-generation S&W pistol.

<span class="mw-page-title-main">Smith & Wesson Model 4506</span> Semi-Automatic Pistol

The Smith & Wesson Model 4506 is a third-generation semi-automatic pistol from Smith & Wesson's 4500 series of handguns. The 4506 is chambered for the .45 ACP cartridge and, with the purchase of special springs, the stronger .45 Super. It is constructed almost entirely from stainless steel and is thus extremely resistant to harsh weather conditions. The 4506 is a traditional double-action/single-action pistol. The first shot is fired in double-action mode. Each subsequent shot is fired in single-action mode. It features one-piece Xenoy wrap-around grips with either a curved or straight back strap. The 4506 was produced from 1988 to 1999.

<span class="mw-page-title-main">Smith & Wesson Model 59</span> Semi-automatic pistol

The Smith & Wesson Model 59 is a double-action pistol produced from 1971 to 1982. It was developed by Smith & Wesson from the earlier Smith & Wesson Model 39 by adapting a 14-round capacity stagger-stack magazine.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Smith & Wesson Model 457</span> Semi-automatic handgun

The Smith & Wesson Model 457 is a compact semi-automatic pistol from Smith & Wesson's Third Generation series of alloy and steel-framed handguns in company's Value Line of budget-priced auto pistols. The 457 is a compact pistol chambered for the .45 ACP cartridge. The design utilizes a double-action/single action trigger mechanism, meaning that the first shot is fired with long double-action pull, with following shots fired in single-action. The 457's external hammer omits a thumb spur, thereby reducing the risk of being caught on clothing during unholstering. A slide-mounted safety lever that drops the hammer from its cocked position when moved to the 'safe' position. The 457 has a 95 mm (3.75 in) barrel and 7-round magazine capacity. The Model 457 was produced with a matte-finish carbon steel slide and blackened aluminum alloy frame. Other versions include the Model 457S with a stainless steel slide and aluminum frame, and the Model 457TDA with a satin-finished aluminum frame and black carbon steel slide.

<span class="mw-page-title-main">Smith & Wesson M&P</span> Semi-automatic pistol

The Smith & Wesson M&P is a polymer-framed, short recoil operated, locked breech semi-automatic pistol introduced in the summer of 2005 by the American company Smith & Wesson. It uses a Browning-type locking system. While targeted at law enforcement agencies, the M&P is also widely available on the commercial market.

<span class="mw-page-title-main">SIG Sauer P230</span> Semi-automatic pistol

The SIG Sauer P230 is a small, semi-automatic handgun chambered in .32 ACP or .380 Auto. It was designed by SIG Sauer of Eckernförde, Germany. It was imported into the United States by SIGARMS in 1985. In 1996 it was replaced by the model P232.

<span class="mw-page-title-main">Smith & Wesson SW</span> Semi-automatic pistol

The Smith & Wesson SW series, most commonly referred to as the Smith & Wesson Sigma, was Smith & Wesson's first venture into using synthetic materials in pistol construction, with high-strength polymer material for the frame.

The Smith & Wesson 6904 is a 9mm DA/SA semi-automatic pistol.

<span class="mw-page-title-main">Kahr K series</span> Semi-automatic pistol

The Kahr K series is a series of semi-automatic pistols manufactured by Kahr Arms. The original weapon in the series, the K9, was introduced in 1995 and features a double action only (DAO) trigger mechanism with a Locked breech recoil operated action. It was intended to address the police backup / off duty and civilian concealed carry markets.

<span class="mw-page-title-main">Taurus Millennium series</span> Semi-automatic pistol

The Taurus Millennium series is a product line of double-action only (DAO) and single-action/double-action hammerless, striker-fired, short recoil operated, semi-automatic pistols manufactured by Forjas Taurus S/A in Porto Alegre Brazil. The Millennium line was designed to contend in the civilian concealed carry firearms market, and to be sold as backup weapons for law enforcement officers.

The Smith & Wesson 645 and Smith & Wesson 745 are second-generation semi-automatic pistols which predate Smith & Wesson's 4500 series of handguns. The S&W 645/745 is chambered for the .45 ACP cartridge. The S&W 645 is constructed almost entirely from stainless steel and is thus extremely resistant to harsh weather conditions, whereas the S&W 745 has a stainless steel frame and a blued carbon steel slide. The S&W 645 was introduced in 1985 and discontinued in 1988. The S&W 745 was produced from 1986 to 1990, primarily as a single-action competition gun for IPSC shooting.

<span class="mw-page-title-main">Smith & Wesson SD VE</span> Semi-automatic pistol

The Smith & Wesson SD Series is a polymer-framed, striker-fired semi-automatic pistol line that the American company Smith & Wesson introduced in 2010, replacing the SW / Sigma line. Smith & Wesson started manufacturing "SD VE" models in 2012. The SD VE models have stainless steel slides. Aside from slide color differences, SD and SD VE pistols are mechanically identical.

<span class="mw-page-title-main">Smith & Wesson Bodyguard</span> Family of small, J-frame revolvers

The Smith & Wesson Bodyguard is a family of small J-frame revolvers with shrouded hammers manufactured by Smith & Wesson. They are available chambered in either .38 Special or .357 Magnum.

References

  1. 1 2 3 Supica, Jim; Nahas, Richard (2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. pp. 315–317. ISBN   978-0-89689-293-4.
  2. "Cite Cheaper Than Dirt Website" . Retrieved 3 August 2023.
  3. Garry Breitkreuz (1999-04-27). "RCMP NOW ADMIT THEY HAD FOUR SNIPERS ON THE HILL DURING GUN LAW PROTEST". Archived from the original on 2013-06-13. Retrieved 2013-06-13.
  4. Government of Canada, Public Services and Procurement Canada. "Information archivée dans le Web" (PDF). publications.gc.ca. Retrieved 3 August 2023.
  5. 学研 「図説 世界の特殊作戦」 ISBN   978-4-05-604649-6 p127
  6. "屏東縣政府警察局全球資訊網".
  7. "Home of the Los Angeles Police Department".
  8. "Colorado Gun Laws". Colorado State Patrol - CSP. 2014-08-06. Retrieved 2019-04-08.
  9. "La Policía cambiará sus armas". 25 April 2018.