Smith & Wesson Model 610

Last updated
Model 610
DCB Shooting Bren Ten & SW 610.jpg
The Smith & Wesson Model 610 (top) with a Bren Ten
Type Revolver
Place of originUnited States
Production history
Manufacturer Smith & Wesson
Specifications
Mass42.5 oz (1,200 g) (3.875 in barrel)
49.4 oz (1,400 g) (6.5 in barrel)
Length9.5 in (240 mm) (3.875 in barrel)
12 in (304.8 mm) (6.5 in barrel)
Barrel  length3.875 in (98.4 mm)
6.5 in (165.1 mm)

Cartridge 10mm Auto
.40 Smith & Wesson
Action Double-action revolver
Feed system6-round cylinder
SightsInterchangeable front blade, adjustable rear notch

The Model 610 is a six-shot, double-action revolver chambered for the 10mm Auto cartridge. [1]

The 610 was manufactured by Smith & Wesson on the N-frame, similar to the Smith & Wesson Model 29 in .44 Magnum, and the Model 27/28 in .357 Magnum. The 10mm Auto is a rimless automatic pistol cartridge, so moon clips are used to hold cartridges when loading and extracting spent cases en bloc. The Model 610 can also chamber and fire .40 S&W rounds, as the .40 S&W cartridge is a shorter, less powerful variant of the 10mm Auto with the same diameter. [2]

History

The Model 610 debuted in 1990, but shortly after its introduction, popularity of the 10mm round was declining and slow sales caused Smith & Wesson to retire the model in 1992. [2]

After a six-year hiatus, it was reintroduced in 1998 for competitive shooting matches with a few changes. The firing pin was moved from the hammer to inside the frame and an internal safety lock was added. [2] This reintroduction was at the behest of members of the International Practical Shooting Confederation, although the Model 610 is more commonly used in International Defensive Pistol Association matches. [2]

In 2019, Smith and Wesson reintroduced the 610 in 4-inch (10 cm) and 6-inch (15 cm) barrel lengths. Like the 1998 version, the 2019 models have a six-round capacity, stainless steel for all major parts, and Smith and Wesson's safety-lock system. The 2019 version comes standard with black synthetic finger groove grips, a black blade interchangeable front sight, and an adjustable white outline rear sight. The 610 is capable of firing both 10mm and .40 S&W cartridges, using moon clips that come standard with the revolver. [3]

A full moonclip of .40S&W is being inserted into a Smith & Wesson 610. https://www.thefirearmblog.com/blog/2021/05/19/10mm-revolver-smith-wesson-610/ Uploaded by writer for The Firearm Blog with Editor's permission. Revolver moonclips.jpg
A full moonclip of .40S&W is being inserted into a Smith & Wesson 610. https://www.thefirearmblog.com/blog/2021/05/19/10mm-revolver-smith-wesson-610/ Uploaded by writer for The Firearm Blog with Editor's permission.

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges before needing to be reloaded, revolvers are also commonly called six shooters.

<span class="mw-page-title-main">.38 Special</span> Revolver cartridge designed by Smith & Wesson

The .38 Special, also commonly known as .38 S&W Special, .38 Smith & Wesson Special, .38 Spl, .38 Spc,, or 9x29mmR is a rimmed, centerfire cartridge designed by Smith & Wesson.

<span class="mw-page-title-main">Smith & Wesson Model 29</span> Revolver

The Smith & Wesson Model 29 is a six-shot, double-action revolver chambered for the .44 Magnum cartridge and manufactured by the United States company Smith & Wesson.

<span class="mw-page-title-main">10mm Auto</span> Firearm cartridge

The 10mm Auto is a semi-automatic pistol cartridge introduced in 1983. Its design was adopted and later produced by ammunition manufacturer FFV Norma AB of Åmotfors, Sweden.

<span class="mw-page-title-main">.32 S&W Long</span> American handgun cartridge

The .32 S&W Long, also known as 7.65x23mm, is a straight-walled, centerfire, rimmed handgun cartridge, based on the earlier .32 S&W cartridge. It was introduced in 1896 for Smith & Wesson's first-model Hand Ejector revolver. Colt called it the .32 Colt New Police in revolvers it made chambered for the cartridge.

<span class="mw-page-title-main">Smith & Wesson Model 19</span> Revolver

The Smith & Wesson Model 19 is a revolver produced by Smith & Wesson that was introduced in 1957 on its K-frame. The Model 19 is chambered for .357 Magnum. The K-frame is somewhat smaller and lighter than the original N-frame .357, usually known as the Smith & Wesson Model 27. A stainless steel variant of the Model 19, the Smith & Wesson Model 66, was introduced in 1971.

<span class="mw-page-title-main">Smith & Wesson Model 10</span> Service revolver

The Smith & Wesson Model 10, previously known as the Smith & Wesson .38 Hand Ejector Model of 1899, the Smith & Wesson Military & Police or the Smith & Wesson Victory Model, is a K-frame revolver of worldwide popularity. In production since 1899, the Model 10 is a six-shot, .38 Special, double-action revolver with fixed sights. Over its long production run it has been available with barrel lengths of 2 in (51 mm), 3 in (76 mm), 4 in (100 mm), 5 in (130 mm), and 6 in (150 mm). Barrels of 2.5 inches (64 mm) are also known to have been made for special contracts. Some 6,000,000 of the type have been produced over the years, making it the most produced handgun of the 20th century.

<span class="mw-page-title-main">Moon clip</span>

A moon clip is a ring-shaped or star-shaped piece of metal designed to hold multiple cartridges together as a unit, for simultaneous insertion and extraction from a revolver cylinder. Moon clips may either hold an entire cylinder's worth of cartridges together, half a cylinder, or just two neighboring cartridges. The two-cartridge moon clips can be used for those revolvers that have an odd number of loading chambers such as five or seven and also for those revolvers that allow a shooter to mix both rimless and rimmed types of cartridges in one loading of the same cylinder.

<span class="mw-page-title-main">Smith & Wesson Model 586</span> Revolver

The Smith & Wesson Model 586, is a six- or seven-shot double-action revolver chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. The Model 586 has a carbon steel construction and is available in a blued or nickel finish; it is essentially the same firearm as the Model 686, which has stainless steel construction. It is also known as the Distinguished Combat Magnum.

<span class="mw-page-title-main">Smith & Wesson Model 686</span> Revolver

The Smith & Wesson Model 686 is a six- or seven-shot double-action revolver manufactured by Smith & Wesson and chambered for the .357 Magnum cartridge; it will also chamber and fire .38 Special cartridges. Smith & Wesson introduced the Model 686 in 1981. It is the stainless steel version of the Model 586, which featured a blued steel finish. They are available ported and unported with a choice of 6- or 7-round cylinders.

<span class="mw-page-title-main">Smith & Wesson Model 625</span> Revolver

The Smith & Wesson Model 625, is a six-round, double-action revolver chambered for the .45 ACP using moon clips. The Model 625 is an improved stainless steel version Smith & Wesson Model 22 and a direct descendant of the Smith & Wesson M1917 revolver first issued during World War I.

<span class="mw-page-title-main">M1917 Revolver</span> Revolver

The M1917 Revolvers were six-shot, .45 ACP, large frame revolvers adopted by the United States Military in 1917, to supplement the standard M1911 pistol during World War I. There were two variations of the M1917, one made by Colt and the other by Smith & Wesson. They used moon-clips to hold the cartridges in position, facilitate reloading, and to aid in extraction since revolvers had been designed to eject rimmed cartridges and .45 ACP rounds were rimless for use with the magazine-fed M1911. After World War I, they gained a strong following among civilian shooters. A commercial rimmed cartridge, the .45 Auto Rim, was also developed, so M1917 revolvers could eject cartridge cases without using moon-clips.

<span class="mw-page-title-main">Pocket pistol</span> Term for a small, pocket-sized semi-automatic pistol

In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or similar space.

<span class="mw-page-title-main">Smith & Wesson Model 17</span> Revolver

The Smith & Wesson Model 17 is a six-shot double-action revolver chambered for .22 LR. It is built on Smith & Wesson's medium-sized K-frame.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Smith & Wesson Centennial</span> Revolver

S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame". Depending upon caliber, the cylinder holds either 5, 6, 7, or 8 cartridges. Centennials feature a fully enclosed (internal) hammer, which makes them Double Action Only (DAO) firearms. Like all other "J-frame" Smith & Wesson revolvers, they have a swing-out cylinder. Centennial models have been made in different versions like PD "Personal Defense", LS "Lady Smith", and M&P "Military & Police"

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. The two most common types of handguns are revolvers and semi-automatic pistols, although other types such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">Smith & Wesson Model 22</span> Revolver

The Smith & Wesson Model 22 is a 6-shot, double-action, large frame revolver chambered in .45 ACP using moon clips. It's a refined commercial version of the M1917 revolver first issued during World War I.

The Smith & Wesson Model 646 is a six-shot, double-action revolver chambered for the .40 S&W pistol cartridge, manufactured in 2000 and 2003 by the United States company Smith & Wesson.

<span class="mw-page-title-main">Smith & Wesson Governor</span> Revolver

The Smith & Wesson Governor is a snub-nosed single-action/double-action revolver built on the Z-frame and utilizes a K-frame grip with a lightweight scandium alloy or stainless steel frame.

References

  1. Supica, Jim; Nahas, Richard (2007). Standard Catalog of Smith & Wesson. Iola, Wisconsin: F+W Media, Inc. p. 250. ISBN   0-89689-293-X.
  2. 1 2 3 4 Sweeney, Patrick (2004). "The 610: The revolver for a pistol round". The Gun Digest Book of Smith & Wesson (Iola, Wisconsin ed.). Gun Digest Books. pp. 118–125. ISBN   0-87349-792-9.
  3. " TTAG 20190327"