Union Switch & Signal

Last updated

Union Switch & Signal Inc.
Company type Subsidiary (1917–) [1]
Industry Electronics
Founded1881
Founder George Westinghouse
DefunctJanuary 2009;15 years ago (2009-01) [2]
FateFirst acquired by WABCo in 1917, then other owners. In January 2009, it became "Ansaldo STS USA". [2]
Successor Ansaldo STS USA [1]
Headquarters,
Area served
Worldwide
Products Railway signaling equipment, communication systems and services, level crossing signals
Number of employees
900 (2005)
Parent Ansaldo STS (1988)

Union Switch & Signal (commonly referred to as US&S) was an American company based in Pittsburgh, Pennsylvania, which focused on railway signaling equipment, systems and services. The company was acquired by Ansaldo STS (from 2015, Hitachi Rail STS) in 1988, [1] operating as a wholly-owned company until January 2009, when US&S was renamed "Ansaldo STS USA" to operate as a subsidiary of Ansaldo in the Americas and Asia. [2]

Contents

History

Early years

George Westinghouse founded Union Switch & Signal Inc. in 1881, consolidating the assets of the Union Electric Signal Company (founded by track circuit inventor William Robinson) [3] and the Interlocking Switch & Signal Company (which had pioneered interlockings). [4] In 1925 US&S acquired the Hall Signal Company, primarily to obtain the latter company's patents for searchlight signals. [5]

Corporate management

US&S signal bridge, pictured in 1913 Railroad construction. Theory and practice. A textbook for the use of students in colleges and technical schools (1913) (14761194812).jpg
US&S signal bridge, pictured in 1913

US&S operated as an independent company until 1917, when it became a subsidiary of the Westinghouse Air Brake Company (WABCO). In 1968, American Standard purchased WABCO and reorganized US&S as a separate division. [6]

In 1988, Ansaldo STS, a global supplier of signaling, control and automation systems, purchased US&S from American Standard. [4] [7] In November 1993, US&S became a publicly traded company with shares listed on Nasdaq. [4] In December 1996, US&S merged with the other signaling investments of Ansaldo. As a result of that merger, US&S became a wholly owned subsidiary of Ansaldo STS. The company was renamed Ansaldo STS – USA in January 2009. [8] Ansaldo was acquired by Hitachi and Ansaldo STS became Hitachi Rail STS in 2019.

Throughout its history, US&S had manufacturing facilities in the borough of Swissvale, Pennsylvania, near Pittsburgh. The Swissvale plant was closed in 1985 and demolished in 1986. [9] US&S moved manufacturing operations to a facility in Batesburg-Leesville, South Carolina. [7] It maintained a research facility in Pittsburgh. [10]

Product development

Railway signaling

US&S position light signal, 1922 Position Light Signal US&S.jpg
US&S position light signal, 1922

US&S built the first power interlocking system in the United States, a pneumatic design, in 1882 at East St. Louis, Illinois. Within several years the company developed an electro-pneumatic system, which was widely adopted by railroads across the country. [11]

In 1901 US&S developed the first electro-pneumatic automatic train stop system for the Boston Elevated Railway. This system was later adopted by the New York City Subway and other transit systems. [12] In 1908 the company introduced an electrically controlled highway crossing gate. [13]

In 1923 US&S developed the first inductive train control system. (See also pulse code cab signaling.) The company developed coded track circuits, supporting bi-directional cab signaling, in 1934. [4]

The first digital rail yard control system was built by US&S in 1970, for the Atchison, Topeka & Santa Fe railway at Kansas City, Kansas. [4]

The "Teardrop" mechanical bell

US&S first patented the Model 15A Highway crossing bell on February 20, 1917. The bell has been commonly referred to as the "Teardrop" bell by railroaders and signal fans alike because of its unique shape and thus the name has stuck. This bell has appeared on advertising literature for railroad signals as far back as the 1920s as far abroad as Chile and Italy on early wig wag crossings and flashers. There have been subtle variations in the Teardrop bell over the years ranging from different sized electric coils, inclusion of the patent date on the rain hood, as well as a very early version with a less characteristic rain hood that simply read "UNION, patent pending." This is the least commonly seen variation of the Teardrop. This bell is treasured by many signal collectors for its slow, low pitched ring at an irregular cadence. The production of this bell was discontinued sometime by the 1960s, but WABCO carried replacement castings and service manuals into the 1970s.

Wartime production

During the World War I the Le Rhône 9C 9 cylinder rotary engine was manufactured under license by Union Switch & Signal. It was one of the most common engines for fighter planes from different companies and around 10,000 were made at Swissvale. [14]

Union Switch & Signal was one of the five contractors (including Colt, Remington-Rand, Ithaca Gun Company, and Singer Sewing Machine) to make M1911A1 pistols during World War II. The production blocks assigned to them in 1943 were between SN's 1,041,405 to 1,096,404. Colt duplicated 4,171 pistols in the 1,088,726 to 1,092,896 SN range. Since only 55,000 1911A1's were produced by US&S, they are highly collectible. The reason for the low production numbers is US&S was the last company awarded a government contract and as requirements were reduced in early 1943, the last contract awarded became the first to be cancelled. As a general rule, US&S produced high quality pistols. With the government-owned machine tooling already in place at US&S, they were offered a subcontract arrangement to produce M1 Carbine components. Only Singer produced fewer 1911A1's at 500 total production. [15]

Modern products

Level crossing signal

SearchlightSignalMechanism.JPG
Mechanism of a searchlight signal made by Union Switch & Signal in 1944 for the Rock Island Railroad
US&S Model 14 pwr interlocking w model board bulletin 100.jpg
US&S Model 14 power interlocking machine (1922)

Wayside signaling equipment

Central Control signaling equipment

Note

See also

Related Research Articles

<span class="mw-page-title-main">Railway air brake</span> Fail-safe power braking system with compressed air as the operating medium

A railway air brake is a railway brake power braking system with compressed air as the operating medium. Modern trains rely upon a fail-safe air brake system that is based upon a design patented by George Westinghouse on April 13, 1869. The Westinghouse Air Brake Company was subsequently organized to manufacture and sell Westinghouse's invention. In various forms, it has been nearly universally adopted.

STS, or sts, may refer to:

<span class="mw-page-title-main">Interlocking</span> Arrangement of railway signal apparatus

In railway signalling, an interlocking is an arrangement of signal apparatus that prevents conflicting movements through an arrangement of tracks such as junctions or crossings. In North America, a set of signalling appliances and tracks interlocked together are sometimes collectively referred to as an interlocking plant or just as an interlocking. An interlocking system is designed so that it is impossible to display a signal to proceed unless the route to be used is proven safe.

<span class="mw-page-title-main">Railway coupling</span> Mechanism for connecting rolling stock in a train

A coupling or coupler is a mechanism, typically located at each end of a rail vehicle, that connects them together to form a train. The equipment that connects the couplers to the vehicles is the draft gear or draw gear, which must absorb the stresses of the coupling and the acceleration of the train.

<span class="mw-page-title-main">Train stop</span> Railway safety device

Part of a railway signalling system, a train stop, trip stop or tripcock is a train protection device that automatically stops a train if it attempts to pass a signal when the signal aspect and operating rules prohibit such movement, or if it attempts to pass at an excessive speed.

<span class="mw-page-title-main">Centralized traffic control</span> Railway signalling system

Centralized traffic control (CTC) is a form of railway signalling that originated in North America. CTC consolidates train routing decisions that were previously carried out by local signal operators or the train crews themselves. The system consists of a centralized train dispatcher's office that controls railroad interlockings and traffic flows in portions of the rail system designated as CTC territory. One hallmark of CTC is a control panel with a graphical depiction of the railroad. On this panel, the dispatcher can keep track of trains' locations across the territory that the dispatcher controls. Larger railroads may have multiple dispatcher's offices and even multiple dispatchers for each operating division. These offices are usually located near the busiest yards or stations, and their operational qualities can be compared to air traffic towers.

Automatic train stop or ATS is a system on a train that automatically stops a train if certain situations occur to prevent accidents. In some scenarios it functions as a type of dead man's switch. Automatic train stop differs from the concept of Automatic Train Control in that ATS usually does not feature an onboard speed control mechanism.

<span class="mw-page-title-main">Westinghouse Air Brake Company</span> Former American manufacturing company

The Westinghouse Air Brake Technologies Corporation was founded on September 28, 1869 by George Westinghouse in Pittsburgh, Pennsylvania. Earlier in the year he had invented the railway air brake in New York state.

<span class="mw-page-title-main">Lever frame</span> Railway signalling system component

Mechanical railway signalling installations rely on lever frames for their operation to interlock the signals, track locks and points to allow the safe operation of trains in the area the signals control. Usually located in the signal box, the levers are operated either by the signalman or the pointsman.

<span class="mw-page-title-main">Train horn</span> Air horn used as a warning device on trains

A train horn is an air horn used as an audible warning device on diesel and electric-powered trains. Its primary purpose is to alert persons and animals to an oncoming train, especially when approaching a level crossing. They are often extremely loud, allowing them to be heard from great distances. They are also used for acknowledging signals given by railroad employees, such as during switching operations. For steam locomotives, the equivalent device is a train whistle.

<span class="mw-page-title-main">General Railway Signal</span>

General Railway Signal Company (GRS) was an American manufacturing company located in the Rochester, New York area. GRS was focused on railway signaling equipment, systems and services. The company was established in 1904 and became part of Alstom Transport in 1998. GRS was a member of the Dow Jones Industrial Average from 1928 to 1930.

The Alton Junction, more commonly known as the 21st Street Crossing, is a historically significant rail location in Chicago, Illinois. The junction can be found just east of Canal Street and north of Cermak Road near Chicago's Chinatown. It is located just south of a massive vertical lift bridge that spans the South Branch of the Chicago River and "guards" the entrance to Chicago's Union Station. While a significant amount of rail traffic still traverses this interlock every day, it has been greatly reduced from using 26 diamonds to control over 150 trains using the crossing.

<span class="mw-page-title-main">Automatic block signaling</span> A railroad communications system

Automatic block signaling (ABS), spelled automatic block signalling or called track circuit block (TCB) in the UK, is a railroad communications system that consists of a series of signals that divide a railway line into a series of sections, called blocks. The system controls the movement of trains between the blocks using automatic signals. ABS operation is designed to allow trains operating in the same direction to follow each other in a safe manner without risk of rear-end collision.

<span class="mw-page-title-main">North American railroad signals</span>

North American railroad signals generally fall into the category of multi-headed electrically lit units displaying speed-based or weak route signaling. Signals may be of the searchlight, color light, position light, or color position light types, each displaying a variety of aspects which inform the locomotive operator of track conditions so that they may keep their train under control and able to stop short of any obstruction or dangerous condition.

Hitachi Rail STS SpA or Hitachi Rail STS is a transportation company owned by Hitachi with a global presence in the field of railway signalling and integrated transport systems for passenger traffic and freight operations. Hitachi Rail STS plans, designs, manufactures, installs and commissions signaling systems, components and technologies for the management and control of newly built or upgraded railways, transit and freight lines worldwide.

Interoperable Communications Based Signaling (ICBS) is an initiative backed by the Federal Railroad Administration to enhance interoperability and signaling procurement in the railway system of the United States by creating a single national standard for train control and command systems. The concept was launched in 2005 and an interoperable prototype system was successfully demonstrated in January 2009.

<span class="mw-page-title-main">Hitachi Rail Italy Driverless Metro</span> Automated electric trainset

The Hitachi Rail Italy Driverless Metro is a class of driverless electric multiple units and corresponding signaling system. Manufactured by Hitachi Rail Italy and Hitachi Rail STS in Italy, it is or will be used on the Copenhagen Metro, Princess Nora bint Abdul Rahman University, the Brescia Metro, the Thessaloniki Metro, Line 5 and Line 4 of the Milan Metro, Line C of the Rome Metro, the Honolulu Skyline system, and the Yellow Line of the Taipei Metro. The first system to use this class of driverless electric multiple units was the Copenhagen Metro which was opened in 2002.

<span class="mw-page-title-main">William Robinson (inventor)</span>

William Robinson was an American inventor, electrical engineer, mechanical engineer and businessman. He invented the first track circuit used in railway signaling, a major development that improved railroad safety and efficiency.

Conway Yard is a major rail yard located in the boroughs of Conway, Pennsylvania, and Freedom, Pennsylvania, 22 miles (35 km) northwest of Pittsburgh, Pennsylvania, along the Ohio River. It was the largest freight yard in the world from 1956 until 1980. It is currently owned by Norfolk Southern (NS) and is one of the largest yards in the United States and on the east coast.

References

  1. 1 2 3 Smith, Brady (March 13, 2014). "Let's Learn From the Past: Union Switch & Signal Co". Pittsburgh Post-Gazette. Archived from the original on April 9, 2015.
  2. 1 2 3 Ansaldo STS USA on Ansaldo website (archived, March 8, 2009)
  3. American Railway Association (1922). The Invention of the Track Circuit. New York. p.  59.{{cite book}}: CS1 maint: location missing publisher (link)
  4. 1 2 3 4 5 "History of Ansaldo - key milestones". Ansaldo STS. May 13, 2011. Archived from the original on November 10, 2011.
  5. Solomon, Brian (2003). Railroad Signaling. MBI Publishing. p. 55. ISBN   978-0-7603-1360-2.
  6. American Standard Brands, Piscataway, NJ. "1968: WABCO Joins Forces with American Standard." The History of American Standard. Accessed 2011-06-11.
  7. 1 2 McKay, Jim (September 24, 1993). "Union Switch showing strength". Pittsburgh Post-Gazette. p. 10.
  8. "Ansaldo STS USA". Our Companies. Ansaldo STS. June 25, 2011. Archived from the original on March 21, 2012.
  9. "Photographs from the Union Switch & Signal Collection". Historic Pittsburgh. University of Pittsburgh. Retrieved June 13, 2016.
  10. Massey, Steve (March 4, 1993). "Union Switch move sends a signal". Pittsburgh Post-Gazette. p. 14.
  11. Union Switch & Signal (1914). Electro-Pneumatic Interlocking. Swissvale, Pennsylvania. pp. 9–11.{{cite book}}: CS1 maint: location missing publisher (link)
  12. US&S (1911). Automatic Block Signalling for Interurban Electric Railways. Swissvale, Pennsylvania. p. 33.{{cite book}}: CS1 maint: location missing publisher (link) Bulletin No. 57.
  13. US&S. Model 14 Electric Crossing Gate. Swissvale, Pennsylvania. Bulletin No. 79.
  14. "Le Rhone Model C, 9 Cylinder, Rotary Engine". Smithsonian National Air and Space Museum.
  15. Collector's Guide to Colt .45 Service Pistols Models of 1911 and 1911A1 by Charles w. Clawson