Becke line test

Last updated

The Becke line test is a technique in optical mineralogy that helps determine the relative refractive index of two materials. It is done by lowering the stage (increasing the focal distance) of the petrographic microscope and observing which direction the light appears to move. This movement will always go into the material of higher refractive index. This index is determined by comparing two minerals directly, or comparing a mineral to a reference material such as Canada Balsam or an oil of known refractive index (oil immersion). When permanently mounted to a slide under a cover slip, the mounting medium is normally chosen to have the same refractive index as Canada Balsam (n=1.55) to avoid confusion when comparing with previously made slides. If a different mounting medium is used, its refractive index should be recorded on the slide, to avoid loss of the information. Media used for impregnating a specimen before sectioning (either for mechanical strength, or to pick out porosity with a contrasting colour) are also usually chosen with the same 1.55 refractive index. If a specimen is mounted without a cover slip - for microprobe analysis, backscattered electron microscopy, reflected light microscopy ... - then an immersion oil can be chosen with whatever refractive index is desired for the study.

The method was developed by Friedrich Johann Karl Becke (1855–1931). [1]

Related Research Articles

<span class="mw-page-title-main">Refractive index</span> Ratio of the speed of light in vacuum to that in the medium

In optics, the refractive index of an optical medium is a dimensionless number that gives the indication of the light bending ability of that medium.

In optics, an index-matching material is a substance, usually a liquid, cement (adhesive), or gel, which has an index of refraction that closely approximates that of another object.

<span class="mw-page-title-main">Optical microscope</span> Microscope that uses visible light

The optical microscope, also referred to as a light microscope, is a type of microscope that commonly uses visible light and a system of lenses to generate magnified images of small objects. Optical microscopes are the oldest design of microscope and were possibly invented in their present compound form in the 17th century. Basic optical microscopes can be very simple, although many complex designs aim to improve resolution and sample contrast.

<span class="mw-page-title-main">Microscope slide</span> Thin, flat piece of glass onto which a sample is placed to be examined under a microscope

A microscope slide is a thin flat piece of glass, typically 75 by 26 mm and about 1 mm thick, used to hold objects for examination under a microscope. Typically the object is mounted (secured) on the slide, and then both are inserted together in the microscope for viewing. This arrangement allows several slide-mounted objects to be quickly inserted and removed from the microscope, labeled, transported, and stored in appropriate slide cases or folders etc.

<span class="mw-page-title-main">Objective (optics)</span>

In optical engineering, the objective is the optical element that gathers light from the object being observed and focuses the light rays to produce a real image. Objectives can be a single lens or mirror, or combinations of several optical elements. They are used in microscopes, binoculars, telescopes, cameras, slide projectors, CD players and many other optical instruments. Objectives are also called object lenses, object glasses, or objective glasses.

<span class="mw-page-title-main">Canada balsam</span> Turpentine made from the resin of the balsam fir tree

Canada balsam, also called Canada turpentine or balsam of fir, is the oleoresin of the balsam fir tree of boreal North America. The resin, dissolved in essential oils, is a viscous, sticky, colourless or yellowish liquid that turns to a transparent yellowish mass when the essential oils have been allowed to evaporate.

A total internal reflection fluorescence microscope (TIRFM) is a type of microscope with which a thin region of a specimen, usually less than 200 nanometers can be observed.

<span class="mw-page-title-main">Thin section</span> Thin slice of a material prepared for microscopic examination

In optical mineralogy and petrography, a thin section is a thin slice of a rock or mineral sample, prepared in a laboratory, for use with a polarizing petrographic microscope, electron microscope and electron microprobe. A thin sliver of rock is cut from the sample with a diamond saw and ground optically flat. It is then mounted on a glass slide and then ground smooth using progressively finer abrasive grit until the sample is only 30 μm thick. The method uses the Michel-Lévy interference colour chart to determine thickness, typically using quartz as the thickness gauge because it is one of the most abundant minerals.

<span class="mw-page-title-main">Optical mineralogy</span> Optical properties of rocks and minerals

Optical mineralogy is the study of minerals and rocks by measuring their optical properties. Most commonly, rock and mineral samples are prepared as thin sections or grain mounts for study in the laboratory with a petrographic microscope. Optical mineralogy is used to identify the mineralogical composition of geological materials in order to help reveal their origin and evolution.

<span class="mw-page-title-main">Oil immersion</span>

In light microscopy, oil immersion is a technique used to increase the resolving power of a microscope. This is achieved by immersing both the objective lens and the specimen in a transparent oil of high refractive index, thereby increasing the numerical aperture of the objective lens.

In light microscopy, a water immersion objective is a specially designed objective lens used to increase the resolution of the microscope. This is achieved by immersing both the lens and the specimen in water which has a higher refractive index than air, thereby increasing the numerical aperture of the objective lens.

The optical properties of all liquid and solid materials change as a function of the wavelength of light used to measure them. This change as a function of wavelength is called the dispersion of the optical properties. The graph created by plotting the optical property of interest by the wavelength at which it is measured is called a dispersion curve.

Optical relief is a visually observable property in optical mineralogy used to identify minerals based on their refractive index. Relief is determined by observing the degree to which grains stand out from a mounting medium of known refractive index ,usually either oil or Canada Balsam. Relief is an important part of the Becke line test.

<span class="mw-page-title-main">PSF Lab</span> Microscope software

PSF Lab is a software program that allows the calculation of the illumination point spread function (PSF) of a confocal microscope under various imaging conditions. The calculation of the electric field vectors is based on a rigorous, vectorial model that takes polarization effects in the near-focus region and high numerical aperture microscope objectives into account.

<span class="mw-page-title-main">Friedrich Johann Karl Becke</span>

Friedrich Johann Karl Becke was an Austrian mineralogist and petrographer.

Becke is a surname. Notable people with this surname include:

<span class="mw-page-title-main">Condenser (optics)</span> Type of optical lens

A condenser is an optical lens which renders a divergent beam from a point source into a parallel or converging beam to illuminate an object.

Babefphite is a rare phosphate mineral with the general formula BaBe(PO4)(F,OH). The name is given for its composition (Ba meaning barium, Be meaning beryllium, F meaning fluorine, and P for phosphorus).

<span class="mw-page-title-main">Nambulite</span>

Nambulite is a lithium bearing manganese silicate mineral with the chemical formula (Li,Na)Mn4Si5O14(OH). It is named after the mineralogist, Matsuo Nambu (born 1917) of Tohoko University, Japan, who is known for his research in manganese minerals. The mineral was first discovered in the Funakozawa Mine of northeastern Japan, a metasedimentary manganese ore.

<span class="mw-page-title-main">Live-cell imaging</span> Study of living cells using time-lapse microscopy

Live-cell imaging is the study of living cells using time-lapse microscopy. It is used by scientists to obtain a better understanding of biological function through the study of cellular dynamics. Live-cell imaging was pioneered in the first decade of the 21st century. One of the first time-lapse microcinematographic films of cells ever made was made by Julius Ries, showing the fertilization and development of the sea urchin egg. Since then, several microscopy methods have been developed to study living cells in greater detail with less effort. A newer type of imaging using quantum dots have been used, as they are shown to be more stable. The development of holotomographic microscopy has disregarded phototoxicity and other staining-derived disadvantages by implementing digital staining based on cells’ refractive index.

References

  1. Davidson, Michael W. "Friedrich Johann Karl Becke (1855–1931)". Molecular Expressions. Retrieved 21 November 2012.

Further reading