Electronic data processing

Last updated

Electronic data processing (EDP) or business information processing can refer to the use of automated methods to process commercial data. Typically, this uses relatively simple, repetitive activities to process large volumes of similar information. For example: stock updates applied to an inventory, banking transactions applied to account and customer master files, booking and ticketing transactions to an airline's reservation system, billing for utility services. The modifier "electronic" or "automatic" was used with "data processing" (DP), especially c. 1960, to distinguish human clerical data processing from that done by computer. [1] [2]

Contents

History

A punched card from the mid-twentieth century. Used Punchcard (5151286161).jpg
A punched card from the mid-twentieth century.

Herman Hollerith then at the U.S. Census Bureau devised a tabulating system that included cards (Hollerith card, later Punched card), a punch for holes in them representing data, a tabulator and a sorter. [3] The system was tested in computing mortality statistics for the city of Baltimore. [3] In the first commercial electronic data processing Hollerith machines were used to compile the data accumulated in the 1890 U.S. Census of population. [4] Hollerith's Tabulating Machine Company merged with two other firms to form the Computing-Tabulating-Recording Company, later renamed IBM. The punch-card and tabulation machine business remained the core of electronic data processing until the advent of electronic computing in the 1950s (which then still rested on punch cards for storing information). [5]

1967 letter by the Midland Bank to a customer, on the introduction of electronic data processing 1967 Midland Bank letter on electronic data processing.JPG
1967 letter by the Midland Bank to a customer, on the introduction of electronic data processing
Electronic data processing in the Volkswagen factory Wolfsburg, 1973 Bundesarchiv B 145 Bild-F038812-0022, Wolfsburg, VW Autowerk, EDV.jpg
Electronic data processing in the Volkswagen factory Wolfsburg, 1973

The first commercial business computer was developed in the United Kingdom in 1951, by the J. Lyons and Co. catering organization. [6] This was known as the 'Lyons Electronic Office' – or LEO for short. It was developed further and used widely during the 1960s and early 1970s. (Lyons formed a separate company to develop the LEO computers and this subsequently merged to form English Electric Leo Marconi and then International Computers Limited. [7] By the end of the 1950s punched card manufacturers, Hollerith, Powers-Samas, IBM and others, were also marketing an array of computers. [8] Early commercial systems were installed exclusively by large organizations. These could afford to invest the time and capital necessary to purchase hardware, hire specialist staff to develop bespoke software and work through the consequent (and often unexpected) organizational and cultural changes.

At first, individual organizations developed their own software, including data management utilities, themselves. Different products might also have 'one-off' bespoke software. This fragmented approach led to duplicated effort and the production of management information needed manual effort.

High hardware costs and relatively slow processing speeds forced developers to use resources 'efficiently'. Data storage formats were heavily compacted, for example. A common example is the removal of the century from dates, which eventually led to the 'millennium bug'.

Data input required intermediate processing via punched paper tape or punched card and separate input to a repetitive, labor-intensive task, removed from user control and error-prone. Invalid or incorrect data needed correction and resubmission with consequences for data and account reconciliation.

Data storage was strictly serial on paper tape, and then later to magnetic tape: the use of data storage within readily accessible memory was not cost-effective until hard disk drives were first invented and began shipping in 1957. Significant developments took place in 1959 with IBM announcing the 1401 computer and in 1962 with ICT (International Computers & Tabulators) making delivery of the ICT 1301. Like all machines during this time the processor together with the peripherals – magnetic tape drives, disks drives, drums, printers and card and paper tape input and output required considerable space in specially constructed air conditioned accommodation. [9] Often parts of the punched card installation, in particular sorters, were retained to present the card input to the computer in a pre-sort form that reduced the processing time involved in sorting large amounts of data. [9]

Data processing facilities became available to smaller organizations in the form of the computer services bureau. These offered processing of specific applications e.g. payroll and were often a prelude to the purchase of customers' own computers. Organizations used these facilities for testing programs while awaiting the arrival of their own machine.

These initial machines were delivered to customers with limited software. The design staff was divided into two groups. Systems analysts produced a systems specification and programmers translated the specification into machine language.

Literature on computers and EDP was sparse and mostly obtained through articles appearing in accountancy publications and material supplied by the equipment manufacturers. The first issue of The Computer Journal published by The British Computer Society appeared in mid 1958. [9] The UK Accountancy Body now named The Association of Chartered Certified Accountants formed an Electronic Data Processing Committee in July 1958 with the purpose of informing its members of the opportunities created by the computer. [9] The Committee produced its first booklet in 1959, An Introduction to Electronic Computers. Also in 1958 The Institute of Chartered Accountants in England and Wales produced a paper Accounting by Electronic Methods. [9] The notes show what may be possible and the potential implications of using a computer.

Progressive organizations attempted to go beyond the straight systems transfer from punched card equipment and unit accounting machines to the computer, to producing accounts to the trial balance stage and integrated management information systems. [9] New procedures redesigned the way paper flowed, changed organizational structures, called for a rethink of the way information was presented to management and challenged the internal control principles adopted by the designers of accounting systems. [10] But the full realization of these benefits had to await the arrival of the next generation of computers

Today

As with other industrial processes commercial IT has moved in most cases from a custom-order, craft-based industry where the product was tailored to fit the customer; to multi-use components taken off the shelf to find the best-fit in any situation. Mass-production has greatly reduced costs and IT is available to the smallest organization.

LEO was hardware tailored for a single client. Today, Intel Pentium and compatible chips are standard and become parts of other components which are combined as needed. One individual change of note was the freeing of computers and removable storage from protected, air-filtered environments. Microsoft and IBM at various times have been influential enough to impose order on IT and the resultant standardizations allowed specialist software to flourish.

Software is available off the shelf. Apart from products such as Microsoft Office and IBM Lotus, there are also specialist packages for payroll and personnel management, account maintenance and customer management, to name a few. These are highly specialized and intricate components of larger environments, but they rely upon common conventions and interfaces.

Data storage has also been standardized. Relational databases are developed by different suppliers using common formats and conventions. Common file formats can be shared by large mainframes and desktop personal computers, allowing online, real-time input and validation.

In parallel, software development has fragmented. There are still specialist technicians, but these increasingly use standardized methodologies where outcomes are predictable and accessible. [9] At the other end of the scale, any office manager can dabble in spreadsheets or databases and obtain acceptable results (but there are risks, because many do not know what Software testing is). Specialized software is software that is written for a specific task rather for a broad application area. These programs provide facilities specifically for the purpose for which they were designed. At the other end of the scale, any office manager can dabble in spreadsheets or databases and obtain acceptable results. [9]

See also

Related Research Articles

<span class="mw-page-title-main">Herman Hollerith</span> American statistician and inventor

Herman Hollerith was a German-American statistician, inventor, and businessman who developed an electromechanical tabulating machine for punched cards to assist in summarizing information and, later, in accounting. His invention of the punched card tabulating machine, patented in 1884, marks the beginning of the era of mechanized binary code and semiautomatic data processing systems, and his concept dominated that landscape for nearly a century.

<span class="mw-page-title-main">Punched card</span> Paper-based recording medium

A punched card is a piece of card stock that stores digital data using punched holes. Punched cards were once common in data processing and the control of automated machines.

Data processing is the collection and manipulation of digital data to produce meaningful information. Data processing is a form of information processing, which is the modification (processing) of information in any manner detectable by an observer.

<span class="mw-page-title-main">IBM 650</span> Vacuum-tube 1950s computer system

The IBM 650 Magnetic Drum Data-Processing Machine is an early digital computer produced by IBM in the mid-1950s. It was the first mass-produced computer in the world. Almost 2,000 systems were produced, the last in 1962, and it was the first computer to make a meaningful profit. The first one was installed in late 1954 and it was the most popular computer of the 1950s.

<span class="mw-page-title-main">IBM 701</span> Vacuum-tube computer system

The IBM 701 Electronic Data Processing Machine, known as the Defense Calculator while in development, was IBM’s first commercial scientific computer and its first series production mainframe computer, which was announced to the public on May 21, 1952. It was designed and developed by Jerrier Haddad and Nathaniel Rochester and was based on the IAS machine at Princeton.

<span class="mw-page-title-main">Powers Accounting Machine</span> Early 20th-century tabulating machine

The Powers Accounting Machine was an information processing device developed in the early 20th century for the U.S. Census Bureau. It was then produced and marketed by the Powers Accounting Machine Company, an information technology company founded by the machine's developer. The company thrived in the early 20th century as a producer of tabulating machines. It was a predecessor to the Unisys corporation.

<span class="mw-page-title-main">Unit record equipment</span> Electromechanical machines which processed data using punch cards

Starting at the end of the nineteenth century, well before the advent of electronic computers, data processing was performed using electromechanical machines collectively referred to as unit record equipment, electric accounting machines (EAM) or tabulating machines. Unit record machines came to be as ubiquitous in industry and government in the first two-thirds of the twentieth century as computers became in the last third. They allowed large volume, sophisticated data-processing tasks to be accomplished before electronic computers were invented and while they were still in their infancy. This data processing was accomplished by processing punched cards through various unit record machines in a carefully choreographed progression. This progression, or flow, from machine to machine was often planned and documented with detailed flowcharts that used standardized symbols for documents and the various machine functions. All but the earliest machines had high-speed mechanical feeders to process cards at rates from around 100 to 2,000 per minute, sensing punched holes with mechanical, electrical, or, later, optical sensors. The operation of many machines was directed by the use of a removable plugboard, control panel, or connection box. Initially all machines were manual or electromechanical. The first use of an electronic component was in 1937 when a photocell was used in a Social Security bill-feed machine. Electronic components were used on other machines beginning in the late 1940s.

<span class="mw-page-title-main">Keypunch</span> Device for punching holes into paper cards

A keypunch is a device for precisely punching holes into stiff paper cards at specific locations as determined by keys struck by a human operator. Other devices included here for that same function include the gang punch, the pantograph punch, and the stamp. The term was also used for similar machines used by humans to transcribe data onto punched tape media.

<span class="mw-page-title-main">IBM 407</span> Tabulating machine introduced in 1949

The IBM 407 Accounting Machine, introduced in 1949, was one of a long line of IBM tabulating machines dating back to the days of Herman Hollerith. It had a card reader and printer; a summary punch could be attached. Processing was directed by a control panel.

<span class="mw-page-title-main">Tabulating machine</span> Late 19th-century machine for summarizing information stored on punch cards

The tabulating machine was an electromechanical machine designed to assist in summarizing information stored on punched cards. Invented by Herman Hollerith, the machine was developed to help process data for the 1890 U.S. Census. Later models were widely used for business applications such as accounting and inventory control. It spawned a class of machines, known as unit record equipment, and the data processing industry.

The APE(X)C, or All Purpose Electronic (X) Computer series was designed by Andrew Donald Booth at Birkbeck College, London in the early 1950s. His work on the APE(X)C series was sponsored by the British Rayon Research Association. Although the naming conventions are slightly unclear, it seems the first model belonged to the BRRA. According to Booth, the X stood for X-company.

<span class="mw-page-title-main">International Computers and Tabulators</span>

International Computers and Tabulators or ICT was a British computer manufacturer, formed in 1959 by a merger of the British Tabulating Machine Company (BTM) and Powers-Samas. In 1963 it acquired the business computer divisions of Ferranti. It exported computers to many countries and in 1968 became part of International Computers Limited (ICL).

A computer operator is a role in IT which oversees the running of computer systems, ensuring that the machines, and computers are running properly. The job of a computer operator as defined by the United States Bureau of Labor Statistics is to "monitor and control ... and respond to ... enter commands ... set controls on computer and peripheral devices. This Excludes Data Entry."

Employee scheduling software automates the process of creating and maintaining a schedule. Automating the scheduling of employees increases productivity and allows organizations with hourly workforces to re-allocate resources to non-scheduling activities. Such software will usually track vacation time, sick time, compensation time, and alert when there are conflicts. As scheduling data is accumulated over time, it may be extracted for payroll or to analyze past activity. Although employee scheduling software may or may not make optimization decisions, it does manage and coordinate the tasks. Today's employee scheduling software often includes mobile applications. Mobile scheduling further increased scheduling productivity and eliminated inefficient scheduling steps. It may also include functionality including applicant tracking and on-boarding, time and attendance, and automatic limits on overtime. Such functionality can help organizations with issues like employee retention, compliance with labor laws, and other workforce management challenges.

<span class="mw-page-title-main">Computing-Tabulating-Recording Company</span> Former American business machines company

The Computing-Tabulating-Recording Company (CTR) was a holding company of manufacturers of record-keeping and measuring systems; it was subsequently known as IBM.

International Business Machines (IBM) is a multinational corporation specializing in computer technology and information technology consulting. Headquartered in Armonk, New York, the company originated from the amalgamation of various enterprises dedicated to automating routine business transactions, notably pioneering punched card-based data tabulating machines and time clocks. In 1911, these entities were unified under the umbrella of the Computing-Tabulating-Recording Company (CTR).

Paper data storage refers to the use of paper as a data storage device. This includes writing, illustrating, and the use of data that can be interpreted by a machine or is the result of the functioning of a machine. A defining feature of paper data storage is the ability of humans to produce it with only simple tools and interpret it visually.

BESYS was an early computing environment originally implemented as a batch processing operating system in 1957 at Bell Labs for the IBM 704 computer.

<span class="mw-page-title-main">14th Weather Squadron</span> Military unit

The 14th Weather Squadron is a Geographically Separate Unit (GSU) of the 2nd Weather Group. The squadron is located in the Veach-Baley Federal Complex in Asheville, North Carolina. Its mission is military applied climatology. The 14 WS collects, protects and exploits authoritative climate data to optimize military and intelligence operations and planning in order to maximize the combat effectiveness of U.S. Department of Defense (DoD) personnel and weapons systems. It delivers environmental information worldwide to the United States Air Force (USAF), the Army, Unified Combatant Commands, the Intelligence Community, and the Department of Defense. The 14 WS also collaborates with the National Centers for Environmental Information (NCEI).

References

  1. Illingworth, Valerie (11 December 1997). Dictionary of Computing . Oxford Paperback Reference (4th ed.). Oxford University Press. p.  126. ISBN   9780192800466.
  2. Anthony Ralston. Encyclopedia of Computer Science 4ed. Nature group. p. 502.
  3. 1 2 "From Herman Hollerith to IBM". Because of Her Story. Smithsonian. Retrieved 22 August 2021.
  4. "Tabulating Equipment, From Herman Hollerith to IBM". Smithsonian, National Museum of American History. Retrieved July 6, 2019.
  5. "Herman Hollerith (1860-1929)". Immigrant Entrepreneurship. Retrieved July 6, 2019.
  6. World’s First Business Computer, LEO, Turns 60 Archived 2014-02-19 at the Wayback Machine , TechWeek Europe
  7. Bird, Peter (2002). "J. Lyons & Co.: LEO Computers" . Retrieved 18 May 2009.
  8. Goldsmith J A. Choosing your Computer. The Accountant 14 June 1958.
  9. 1 2 3 4 5 6 7 8 Goyal, Meera; Mathur, Nishit (2020). Information Technology & Its Implications in Business. SBPD Publications. ISBN   978-93-5167-164-0 . Retrieved 22 August 2021.
  10. Mitchell R. baba Control with a Computer. The Accountant 3 November 1962.