Geometrized unit system

Last updated May 21, 2024

A geometrized unit system^[1] or geometrodynamic unit system is a system of natural units in which the base physical units are chosen so that the speed of light in vacuum, c, and the gravitational constant, G, are set equal to unity.

Many equations in relativistic physics appear simpler when expressed in geometric units, because all occurrences of G and of c drop out. For example, the Schwarzschild radius of a nonrotating uncharged black hole with mass m becomes r = 2m. For this reason, many books and papers on relativistic physics use geometric units. An alternative system of geometrized units is often used in particle physics and cosmology, in which 8πG = 1 instead. This introduces an additional factor of 8π into Newton's law of universal gravitation but simplifies the Einstein field equations, the Einstein–Hilbert action, the Friedmann equations and the Newtonian Poisson equation by removing the corresponding factor.

Practical measurements and computations are usually done in SI units, but conversions are generally quite straightforward.^{[ citation needed ]}

Definition

Geometrized units were defined in the book Gravitation (book) by Charles W. Misner, Kip S. Thorne, and John Archibald Wheeler with the speed of light, $c$ , the gravitational constant, $G$ , and Boltzmann constant, $k_{b}$ all set to $1.0$ .^[1]^: 36 Some authors refer to these units as geometrodynamic units.^[2]

In geometric units, every time interval is interpreted as the distance travelled by light during that given time interval. That is, one second is interpreted as one light-second, so time has the geometric units of length. This is dimensionally consistent with the notion that, according to the kinematical laws of special relativity, time and distance are on an equal footing.

Energy and momentum are interpreted as components of the four-momentum vector, and mass is the magnitude of this vector, so in geometric units these must all have the dimension of length. We can convert a mass expressed in kilograms to the equivalent mass expressed in metres by multiplying by the conversion factor G/c². For example, the Sun's mass of 2.0×10³⁰ kg in SI units is equivalent to 1.5 km. This is half the Schwarzschild radius of a one solar mass black hole. All other conversion factors can be worked out by combining these two.

The small numerical size of the few conversion factors reflects the fact that relativistic effects are only noticeable when large masses or high speeds are considered.

Conversions

Listed below are all conversion factors that are useful to convert between all combinations of the SI base units, and if not possible, between them and their unique elements, because ampere is a dimensionless ratio of two lengths such as [C/s], and candela (1/683 [W/sr]) is a dimensionless ratio of two dimensionless ratios such as ratio of two volumes [kg⋅m²/s³] = [W] and ratio of two areas [m²/m²] = [sr], while mole is only a dimensionless Avogadro number of entities such as atoms or particles:

	m	kg	s	C	K
m	1	c²/G [kg/m]	1/c [s/m]	c²/(G/(ε₀))^1/2 [C/m]	c⁴/(Gk_B) [K/m]
kg	G/c² [m/kg]	1	G/c³ [s/kg]	(Gε₀)^1/2 [C/kg]	c²/k_B [K/kg]
s	c [m/s]	c³/G [kg/s]	1	c³/(G/(ε₀))^1/2 [C/s]	c⁵/(Gk_B) [K/s]
C	(G/(ε₀))^1/2/c² [m/C]	1/(Gε₀)^1/2 [kg/C]	(G/(ε₀))^1/2/c³ [s/C]	1	c²/(k_B(Gε₀)^1/2) [K/C]
K	Gk_B/c⁴ [m/K]	k_B/c² [kg/K]	Gk_B/c⁵ [s/K]	k_B(Gε₀)^1/2/c² [C/K]	1

Related Research Articles

In engineering and science, dimensional analysis is the analysis of the relationships between different physical quantities by identifying their base quantities and units of measurement and tracking these dimensions as calculations or comparisons are performed. The term dimensional analysis is also used to refer to conversion of units from one dimensional unit to another, which can be used to evaluate scientific formulae.

General relativity, also known as the general theory of relativity and Einstein's theory of gravity, is the geometric theory of gravitation published by Albert Einstein in 1915 and is the current description of gravitation in modern physics. General relativity generalizes special relativity and refines Newton's law of universal gravitation, providing a unified description of gravity as a geometric property of space and time or four-dimensional spacetime. In particular, the curvature of spacetime is directly related to the energy and momentum of whatever matter and radiation are present. The relation is specified by the Einstein field equations, a system of second order partial differential equations.

Mass is an intrinsic property of a body. It was traditionally believed to be related to the quantity of matter in a body, until the discovery of the atom and particle physics. It was found that different atoms and different elementary particles, theoretically with the same amount of matter, have nonetheless different masses. Mass in modern physics has multiple definitions which are conceptually distinct, but physically equivalent. Mass can be experimentally defined as a measure of the body's inertia, meaning the resistance to acceleration when a net force is applied. The object's mass also determines the strength of its gravitational attraction to other bodies.

Dimensionless quantities, also known as quantities of dimension one are implicitly defined in a manner that prevents their aggregation into units of measurement. Typically expressed as ratios that align with another system, these quantities do not necessitate explicitly defined units. For instance, alcohol by volume (ABV) represents a volumetric ratio. Its derivation remains independent of the specific units of volume used; any common unit may be applied. Notably, ABV is never expressed as milliliters per milliliter, underscoring its dimensionless nature.

<span class="mw-page-title-main">Gravitational field</span> Model in physics

In physics, a gravitational field or gravitational acceleration field is a vector field used to explain the influences that a body extends into the space around itself. A gravitational field is used to explain gravitational phenomena, such as the gravitational force field exerted on another massive body. It has dimension of acceleration (L/T²) and it is measured in units of newtons per kilogram (N/kg) or, equivalently, in meters per second squared (m/s²).

Newton's law of universal gravitation says that every particle attracts every other particle in the universe with a force that is proportional to the product of their masses and inversely proportional to the square of the distance between their centers. Separated objects attract and are attracted as if all their mass were concentrated at their centers. The publication of the law has become known as the "first great unification", as it marked the unification of the previously described phenomena of gravity on Earth with known astronomical behaviors.

In Einstein's theory of general relativity, the Schwarzschild metric is an exact solution to the Einstein field equations that describes the gravitational field outside a spherical mass, on the assumption that the electric charge of the mass, angular momentum of the mass, and universal cosmological constant are all zero. The solution is a useful approximation for describing slowly rotating astronomical objects such as many stars and planets, including Earth and the Sun. It was found by Karl Schwarzschild in 1916.

The Kerr metric or Kerr geometry describes the geometry of empty spacetime around a rotating uncharged axially symmetric black hole with a quasispherical event horizon. The Kerr metric is an exact solution of the Einstein field equations of general relativity; these equations are highly non-linear, which makes exact solutions very difficult to find.

In theoretical physics, geometrodynamics is an attempt to describe spacetime and associated phenomena completely in terms of geometry. Technically, its goal is to unify the fundamental forces and reformulate general relativity as a configuration space of three-metrics, modulo three-dimensional diffeomorphisms. The origin of this idea can be found in an English mathematician William Kingdon Clifford's works. This theory was enthusiastically promoted by John Wheeler in the 1960s, and work on it continues in the 21st century.

In physics, the Brans–Dicke theory of gravitation is a competitor to Einstein's general theory of relativity. It is an example of a scalar–tensor theory, a gravitational theory in which the gravitational interaction is mediated by a scalar field as well as the tensor field of general relativity. The gravitational constant $is not presumed to be constant but instead is replaced by a scalar field which can vary from place to place and with time.$

A variable speed of light (VSL) is a feature of a family of hypotheses stating that the speed of light may in some way not be constant, for example, that it varies in space or time, or depending on frequency. Accepted classical theories of physics, and in particular general relativity, predict a constant speed of light in any local frame of reference and in some situations these predict apparent variations of the speed of light depending on frame of reference, but this article does not refer to this as a variable speed of light. Various alternative theories of gravitation and cosmology, many of them non-mainstream, incorporate variations in the local speed of light.

In theoretical physics, Whitehead's theory of gravitation was introduced by the mathematician and philosopher Alfred North Whitehead in 1922. While never broadly accepted, at one time it was a scientifically plausible alternative to general relativity. However, after further experimental and theoretical consideration, the theory is now generally regarded as obsolete.

The mathematics of general relativity is complicated. In Newton's theories of motion, an object's length and the rate at which time passes remain constant while the object accelerates, meaning that many problems in Newtonian mechanics may be solved by algebra alone. In relativity, however, an object's length and the rate at which time passes both change appreciably as the object's speed approaches the speed of light, meaning that more variables and more complicated mathematics are required to calculate the object's motion. As a result, relativity requires the use of concepts such as vectors, tensors, pseudotensors and curvilinear coordinates.

<i>General Relativity</i> (book) 1984 graduate textbook by Robert M. Wald

General Relativity is a graduate textbook and reference on Albert Einstein's general theory of relativity written by the gravitational physicist Robert Wald.

The two-body problem in general relativity is the determination of the motion and gravitational field of two bodies as described by the field equations of general relativity. Solving the Kepler problem is essential to calculate the bending of light by gravity and the motion of a planet orbiting its sun. Solutions are also used to describe the motion of binary stars around each other, and estimate their gradual loss of energy through gravitational radiation.

This article will use the Einstein summation convention.

Newton–Cartan theory is a geometrical re-formulation, as well as a generalization, of Newtonian gravity first introduced by Élie Cartan and Kurt Friedrichs and later developed by Dautcourt, Dixon, Dombrowski and Horneffer, Ehlers, Havas, Künzle, Lottermoser, Trautman, and others. In this re-formulation, the structural similarities between Newton's theory and Albert Einstein's general theory of relativity are readily seen, and it has been used by Cartan and Friedrichs to give a rigorous formulation of the way in which Newtonian gravity can be seen as a specific limit of general relativity, and by Jürgen Ehlers to extend this correspondence to specific solutions of general relativity.

In particle physics and physical cosmology, Planck units are a system of units of measurement defined exclusively in terms of four universal physical constants: c, G, ħ, and k_B. Expressing one of these physical constants in terms of Planck units yields a numerical value of 1. They are a system of natural units, defined using fundamental properties of nature rather than properties of a chosen prototype object. Originally proposed in 1899 by German physicist Max Planck, they are relevant in research on unified theories such as quantum gravity.

In physics, natural unit systems are measurement systems for which certain physical constants have been set to 1 through nondimensionalization of physical units. For example, the speed of light $c$ may be set to 1, and it may then be omitted, equating mass and energy directly $E = m$ rather than using $c$ as a conversion factor in the typical mass–energy equivalence equation $E = mc 2$ . A purely natural system of units has all of its dimensions collapsed, such that the physical constants completely define the system of units and the relevant physical laws contain no conversion constants.

References

1 2 Misner, Charles W.; Thorne, Kip S.; Wheeler, John Archibald (2008). Gravitation (27. printing ed.). New York, NY: Freeman. ISBN 978-0-7167-0344-0.
↑ Lobo, Francisco S. N.; Rodrigues, Manuel E.; Silva, Marcos V. de S.; Simpson, Alex; Visser, Matt (2021). "Novel black-bounce spacetimes: Wormholes, regularity, energy conditions, and causal structure". Physical Review D. 103 (8): 084052. arXiv: 2009.12057 . Bibcode:2021PhRvD.103h4052L. doi:10.1103/PhysRevD.103.084052. S2CID 235581301.

Wald, Robert M. (1984). General Relativity . Chicago: University of Chicago Press. ISBN 0-226-87033-2.See Appendix F

External links

Conversion factors for energy equivalents

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[MisnerThorneWheeler-1] 1 2 Misner, Charles W.; Thorne, Kip S.; Wheeler, John Archibald (2008). Gravitation (27. printing ed.). New York, NY: Freeman. ISBN 978-0-7167-0344-0.

[2] Lobo, Francisco S. N.; Rodrigues, Manuel E.; Silva, Marcos V. de S.; Simpson, Alex; Visser, Matt (2021). "Novel black-bounce spacetimes: Wormholes, regularity, energy conditions, and causal structure". Physical Review D. 103 (8): 084052. arXiv: 2009.12057 . Bibcode:2021PhRvD.103h4052L. doi:10.1103/PhysRevD.103.084052. S2CID 235581301.

[1]

[2]