Inellipse

Last updated
Example of an inellipse Inellipse-1.svg
Example of an inellipse

In triangle geometry, an inellipse is an ellipse that touches the three sides of a triangle. The simplest example is the incircle. Further important inellipses are the Steiner inellipse, which touches the triangle at the midpoints of its sides, the Mandart inellipse and Brocard inellipse (see examples section). For any triangle there exist an infinite number of inellipses.

Contents

The Steiner inellipse plays a special role: Its area is the greatest of all inellipses.

Because a non-degenerate conic section is uniquely determined by five items out of the sets of vertices and tangents, in a triangle whose three sides are given as tangents one can specify only the points of contact on two sides. The third point of contact is then uniquely determined.

Parametric representations, center, conjugate diameters

An inellipse of a triangle is uniquely determined by the vertices of the triangle and two points of contact
U
,
V
{\displaystyle U,V}
. Inellipse-3.svg
An inellipse of a triangle is uniquely determined by the vertices of the triangle and two points of contact .

The inellipse of the triangle with vertices

and points of contact

on and respectively can by described by the rational parametric representation

where are uniquely determined by the choice of the points of contact:

The third point of contact is

The center of the inellipse is

The vectors

are two conjugate half diameters and the inellipse has the more common trigonometric parametric representation

Brianchon point
K
{\displaystyle K} Inellipse-brianchon-pt.svg
Brianchon point

The Brianchon point of the inellipse (common point of the lines ) is

Varying is an easy option to prescribe the two points of contact . The given bounds for guarantee that the points of contact are located on the sides of the triangle. They provide for the bounds .

Remark: The parameters are neither the semiaxes of the inellipse nor the lengths of two sides.

Examples

Mandart inellipse Inellipse-mandart.svg
Mandart inellipse

Steiner inellipse

For the points of contact are the midpoints of the sides and the inellipse is the Steiner inellipse (its center is the triangle's centroid).

Incircle

For one gets the incircle of the triangle with center

Mandart inellipse

For the inellipse is the Mandart inellipse of the triangle. It touches the sides at the points of contact of the excircles (see diagram).

Brocard inellipse Inellipse-brocard.svg
Brocard inellipse

Brocard inellipse

For one gets the Brocard inellipse. It is uniquely determined by its Brianchon point given in trilinear coordinates .

Derivations of the statements

Determination of the inellipse by solving the problem for a hyperbola in an
x
{\displaystyle \xi }
-
e
{\displaystyle \eta }
-plane and an additional transformation of the solution into the x-y-plane.
M
{\displaystyle M}
is the center of the sought inellipse and
D
1
D
2
,
E
1
E
2
{\displaystyle D_{1}D_{2},\;E_{1}E_{2}}
two conjugate diameters. In both planes the essential points are assigned by the same symbols.
g
[?]
{\displaystyle g_{\infty }}
is the line at infinity of the x-y-plane. Inellipse-2-ab.svg
Determination of the inellipse by solving the problem for a hyperbola in an --plane and an additional transformation of the solution into the x-y-plane. is the center of the sought inellipse and two conjugate diameters. In both planes the essential points are assigned by the same symbols. is the line at infinity of the x-y-plane.
New coordinates

For the proof of the statements one considers the task projectively and introduces convenient new inhomogene --coordinates such that the wanted conic section appears as a hyperbola and the points become the points at infinity of the new coordinate axes. The points will be described in the new coordinate system by and the corresponding line has the equation . (Below it will turn out, that have indeed the same meaning introduced in the statement above.) Now a hyperbola with the coordinate axes as asymptotes is sought, which touches the line . This is an easy task. By a simple calculation one gets the hyperbola with the equation . It touches the line at point .

Coordinate transformation

The transformation of the solution into the x-y-plane will be done using homogeneous coordinates and the matrix

.

A point is mapped onto

A point of the --plane is represented by the column vector (see homogeneous coordinates). A point at infinity is represented by .

Coordinate transformation of essential points
(One should consider: ; see above.)

is the equation of the line at infinity of the x-y-plane; its point at infinity is .

Hence the point at infinity of (in --plane) is mapped onto a point at infinity of the x-y-plane. That means: The two tangents of the hyperbola, which are parallel to , are parallel in the x-y-plane, too. Their points of contact are

Because the ellipse tangents at points are parallel, the chord is a diameter and its midpoint the center of the ellipse

One easily checks, that has the --coordinates

In order to determine the diameter of the ellipse, which is conjugate to , in the --plane one has to determine the common points of the hyperbola with the line through parallel to the tangents (its equation is ). One gets . And in x-y-coordinates:

From the two conjugate diameters there can be retrieved the two vectorial conjugate half diameters

and at least the trigonometric parametric representation of the inellipse:

Analogously to the case of a Steiner ellipse one can determine semiaxes, eccentricity, vertices, an equation in x-y-coordinates and the area of the inellipse.

The third touching point on is:

The Brianchon point of the inellipse is the common point of the three lines . In the --plane these lines have the equations: . Hence point has the coordinates:

Transforming the hyperbola yields the rational parametric representation of the inellipse:

Incircle
Incircle of a triangle Inellipse-kreis.svg
Incircle of a triangle

For the incircle there is , which is equivalent to

(1) Additionally
(2). (see diagram)

Solving these two equations for one gets

(3)

In order to get the coordinates of the center one firstly calculates using (1) und (3)

Hence

Mandart inellipse

The parameters for the Mandart inellipse can be retrieved from the properties of the points of contact (see de: Ankreis).

Brocard inellipse

The Brocard inellipse of a triangle is uniquely determined by its Brianchon point given in trilinear coordinates . [1] Changing the trilinear coordinates into the more convenient representation (see trilinear coordinates) yields . On the other hand, if the parameters of an inellipse are given, one calculates from the formula above for : . Equalizing both expressions for and solving for yields

Inellipse with the greatest area

Proof

From Apollonios theorem on properties of conjugate semi diameters of an ellipse one gets:

(see article on Steiner ellipse).

For the inellipse with parameters one gets

where .
In order to omit the roots, it is enough to investigate the extrema of function :

Because one gets from the exchange of s and t:

Solving both equations for s and t yields

which are the parameters of the Steiner inellipse.
Three mutually touching inellipses of a triangle Inellipse-m3.svg
Three mutually touching inellipses of a triangle

See also

Related Research Articles

<span class="mw-page-title-main">Ellipse</span> Plane curve: conic section

In mathematics, an ellipse is a plane curve surrounding two focal points, such that for all points on the curve, the sum of the two distances to the focal points is a constant. It generalizes a circle, which is the special type of ellipse in which the two focal points are the same. The elongation of an ellipse is measured by its eccentricity , a number ranging from to .

<span class="mw-page-title-main">Hyperbola</span> Plane curve: conic section

In mathematics, a hyperbola is a type of smooth curve lying in a plane, defined by its geometric properties or by equations for which it is the solution set. A hyperbola has two pieces, called connected components or branches, that are mirror images of each other and resemble two infinite bows. The hyperbola is one of the three kinds of conic section, formed by the intersection of a plane and a double cone. If the plane intersects both halves of the double cone but does not pass through the apex of the cones, then the conic is a hyperbola.

In quantum field theory, the Dirac spinor is the spinor that describes all known fundamental particles that are fermions, with the possible exception of neutrinos. It appears in the plane-wave solution to the Dirac equation, and is a certain combination of two Weyl spinors, specifically, a bispinor that transforms "spinorially" under the action of the Lorentz group.

<span class="mw-page-title-main">Continuous uniform distribution</span> Uniform distribution on an interval

In probability theory and statistics, the continuous uniform distributions or rectangular distributions are a family of symmetric probability distributions. Such a distribution describes an experiment where there is an arbitrary outcome that lies between certain bounds. The bounds are defined by the parameters, and which are the minimum and maximum values. The interval can either be closed or open. Therefore, the distribution is often abbreviated where stands for uniform distribution. The difference between the bounds defines the interval length; all intervals of the same length on the distribution's support are equally probable. It is the maximum entropy probability distribution for a random variable under no constraint other than that it is contained in the distribution's support.

In physics and fluid mechanics, a Blasius boundary layer describes the steady two-dimensional laminar boundary layer that forms on a semi-infinite plate which is held parallel to a constant unidirectional flow. Falkner and Skan later generalized Blasius' solution to wedge flow, i.e. flows in which the plate is not parallel to the flow.

In classical mechanics, a Liouville dynamical system is an exactly solvable dynamical system in which the kinetic energy T and potential energy V can be expressed in terms of the s generalized coordinates q as follows:

<span class="mw-page-title-main">Peridynamics</span>

Peridynamics is a non-local formulation of continuum mechanics that is oriented toward deformations with discontinuities, especially fractures. Originally, bond-based peridynamic has been introduced, wherein, internal interaction forces between a material point and all the other ones with which it can interact, are modeled as a central forces field. This type of force fields can be imagined as a mesh of bonds connecting each point of the body with every other interacting point within a certain distance which depends on material property, called peridynamic horizon. Later, to overcome bond-based framework limitations for the material Poisson’s ratio, state-base peridynamics, has been formulated. Its characteristic feature is that the force exchanged between a point and another one is influenced by the deformation state of all other bonds relative to its interaction zone.

Bilinear time–frequency distributions, or quadratic time–frequency distributions, arise in a sub-field of signal analysis and signal processing called time–frequency signal processing, and, in the statistical analysis of time series data. Such methods are used where one needs to deal with a situation where the frequency composition of a signal may be changing over time; this sub-field used to be called time–frequency signal analysis, and is now more often called time–frequency signal processing due to the progress in using these methods to a wide range of signal-processing problems.

<span class="mw-page-title-main">Steiner inellipse</span> Unique ellipse tangent to all 3 midpoints of a given triangles sides

In geometry, the Steiner inellipse, midpoint inellipse, or midpoint ellipse of a triangle is the unique ellipse inscribed in the triangle and tangent to the sides at their midpoints. It is an example of an inellipse. By comparison the inscribed circle and Mandart inellipse of a triangle are other inconics that are tangent to the sides, but not at the midpoints unless the triangle is equilateral. The Steiner inellipse is attributed by Dörrie to Jakob Steiner, and a proof of its uniqueness is given by Dan Kalman.

In fracture mechanics, the energy release rate, , is the rate at which energy is transformed as a material undergoes fracture. Mathematically, the energy release rate is expressed as the decrease in total potential energy per increase in fracture surface area, and is thus expressed in terms of energy per unit area. Various energy balances can be constructed relating the energy released during fracture to the energy of the resulting new surface, as well as other dissipative processes such as plasticity and heat generation. The energy release rate is central to the field of fracture mechanics when solving problems and estimating material properties related to fracture and fatigue.

<span class="mw-page-title-main">Steiner ellipse</span> Circumellipse of a triangle whose center is the triangles centroid

In geometry, the Steiner ellipse of a triangle, also called the Steiner circumellipse to distinguish it from the Steiner inellipse, is the unique circumellipse whose center is the triangle's centroid. Named after Jakob Steiner, it is an example of a circumconic. By comparison the circumcircle of a triangle is another circumconic that touches the triangle at its vertices, but is not centered at the triangle's centroid unless the triangle is equilateral.

In hyperbolic geometry, the "law of cosines" is a pair of theorems relating the sides and angles of triangles on a hyperbolic plane, analogous to the planar law of cosines from plane trigonometry, or the spherical law of cosines in spherical trigonometry. It can also be related to the relativistic velocity addition formula.

<span class="mw-page-title-main">Cnoidal wave</span> Nonlinear and exact periodic wave solution of the Korteweg–de Vries equation

In fluid dynamics, a cnoidal wave is a nonlinear and exact periodic wave solution of the Korteweg–de Vries equation. These solutions are in terms of the Jacobi elliptic function cn, which is why they are coined cnoidal waves. They are used to describe surface gravity waves of fairly long wavelength, as compared to the water depth.

Uncertainty theory is a branch of mathematics based on normality, monotonicity, self-duality, countable subadditivity, and product measure axioms.

<i>q</i>-Gaussian distribution Probability distribution

The q-Gaussian is a probability distribution arising from the maximization of the Tsallis entropy under appropriate constraints. It is one example of a Tsallis distribution. The q-Gaussian is a generalization of the Gaussian in the same way that Tsallis entropy is a generalization of standard Boltzmann–Gibbs entropy or Shannon entropy. The normal distribution is recovered as q → 1.

In thermal quantum field theory, the Matsubara frequency summation is a technique used to simplify calculations involving Euclidean path integrals.

In fluid dynamics, the Burgers vortex or Burgers–Rott vortex is an exact solution to the Navier–Stokes equations governing viscous flow, named after Jan Burgers and Nicholas Rott. The Burgers vortex describes a stationary, self-similar flow. An inward, radial flow, tends to concentrate vorticity in a narrow column around the symmetry axis, while an axial stretching causes the vorticity to increase. At the same time, viscous diffusion tends to spread the vorticity. The stationary Burgers vortex arises when the three effects are in balance.

Triple-deck theory is a theory that describes a three-layered boundary-layer structure when sufficiently large disturbances are present in the boundary layer. This theory is able to successfully explain the phenomenon of boundary layer separation, but it has found applications in many other flow setups as well, including the scaling of the lower-branch instability (T-S) of the Blasius flow, boundary layers in swirling flows, etc. James Lighthill, Lev Landau and others were the first to realize that to explain boundary layer separation, different scales other than the classical boundary-layer scales need to be introduced. These scales were first introduced independently by James Lighthill and E. A. Müller in 1953. The triple-layer structure itself was independently discovered by Keith Stewartson (1969) and V. Y. Neiland (1969) and by A. F. Messiter (1970). Stewartson and Messiter considered the separated flow near the trailing edge of a flat plate, whereas Neiland studied the case of a shock impinging on a boundary layer.

<span class="mw-page-title-main">Green's law</span> Equation describing evolution of waves in shallow water

In fluid dynamics, Green's law, named for 19th-century British mathematician George Green, is a conservation law describing the evolution of non-breaking, surface gravity waves propagating in shallow water of gradually varying depth and width. In its simplest form, for wavefronts and depth contours parallel to each other, it states:

In physics and mathematics, the Klein–Kramers equation or sometimes referred as Kramers–Chandrasekhar equation is a partial differential equation that describes the probability density function f of a Brownian particle in phase space (r, p). It is a special case of the Fokker–Planck equation.

References

  1. Imre Juhász: Control point based representation of inellipses of triangles, Annales Mathematicae et Informaticae 40 (2012) pp. 37–46, p.44