M3 trench knife

Last updated
The M3 Fighting Knife
US M3 Trench Fighting Knife.tif
Original example produced by the Camillus Cutlery Co.
Type Fighting knife
Place of originUnited States
Service history
In service1943–1945
Used by US Military
Wars
Production history
Designed1943
Manufacturer
  • Aerial Cutlery Co.
  • W.R. Case & Sons Co.
  • Imperial Knife Co.
  • Pal Blade and Tool Co.
  • Camillus Cutlery Co.
  • Robeson Cutlery Co.
  • Kinfolks, Inc.
  • Utica Cutlery Co.
  • H. Boker & Sons Co.
ProducedMarch 1943-August 1944
No. built2,590,247
Variants
Specifications
Length11.75 in (29.8 cm)
Blade length6.75 in (17.1 cm)
Blade  typeSpear point
Scabbard/sheath M6, M8, & M8A1

The M3 trench knife or M3 fighting knife was an American military combat knife first issued in March 1943. The M3 was originally designated for issue to soldiers, not otherwise equipped with a bayonet. [1] [2] [3] However, it was particularly designed for use by forces in need of a close combat knife, such as Airborne Units and Army Rangers, so these units received priority for the M3 at the start of production. [2] [3] [4] [5] As more M3 knives became available in 1943 and 1944, the knife was issued to other soldiers such as Army Air Corps crewmen and soldiers not otherwise equipped with a bayonet, including soldiers issued the M1 carbine or a submachine gun such as the M3 submachine gun "grease gun". [1] [2]

Contents

The M3 trench knife was developed as a replacement for the World War I-era U.S. Mark I trench knife, primarily to conserve strategic metal resources. [6] [7] [4] [8] [9] [5] The M3 would also replace the Fairbairn–Sykes fighting knife or OSS dagger in U.S. service in 1944. [10] [11] In August 1944, the M3 fighting knife evolved into the M4 bayonet for the M1 carbine with the addition of a bayonet ring to the hilt and a locking mechanism in the pommel.

Design and features

Designed for rapid production using a minimum of strategic metals and machine processes, the M3 trench knife used a relatively narrow 6.75 in (17.1 cm) bayonet-style spear-point blade with a sharpened 3.5 in (8.9 cm) secondary edge. [6] [7] [4] [8] [9] [5] The blade was made of carbon steel, and was either blued or parkerized. [2] [5] Production of the grooved leather handle was later simplified by forming the grip of stacked leather washers that were shaped by turning on a lathe, then polished and lacquered. [12] [2] The steel crossguard had an angular bend at one end to facilitate a thumb rest. [2]

History

The M3 was developed as a replacement for the World War I-era U.S. Mark I trench knife, primarily to conserve strategic metal resources. [6] [7] [4] [8] [9] [5] The prototype for what became the M3 was evaluated in December 1942 by the civilian board of directors of the Smaller War Plants Corporation Board (SWPC) [13] against another competing design, the US Marine Corps' KA-BAR fighting utility knife. [2] While specified priority steel supplies for both knives were available, the M3's lower production cost compared with that of the KA-BAR convinced the SWPC board of directors to approve the M3 prototype for quantity production. [2] [5]

Although the M3 had competed with the USMC KA-BAR for approval by the Army, the M3, unlike the Marine Corps knife, was not a dual-purpose weapon designed both for close combat (fighting knife) and general use (utility knife). As the U.S. Catalog of Standard Ordnance Items of 1943 clearly explained:

The Trench Knife M3 has been developed to fill the need in modern warfare for hand-to-hand fighting. While designated for issue to soldiers not armed with the bayonet, it was especially designed for such shock units as parachute troops and rangers. [3] [4]

The M3 was first issued to U.S. Army soldiers in March 1943, with the first knives going to elite units such as airborne troops and the U.S. Army Rangers. [4] Despite Ordnance descriptions of the knife as being designed for hand-to-hand warfare, the M3 did not receive universal praise as a close-quarters fighting knife upon issue to combat units. While the knife itself was generally well-made and balanced (some paratroopers and rangers mastered the art of using the M3 as a throwing knife), the long, narrow, dagger-like steel blade, designed to economize on priority steel requirements, was best used as a thrusting or stabbing weapon, and performed less well when used for cutting or slashing strokes. [4] Reports of blade failures on M3s in service increased as soldiers began to use their trench knives for ordinary utility tasks such as opening ammunition crates and food ration tins, a rôle for which the M3 had not been designed. [4] Some soldiers also found the M3's cutting edge to be difficult to maintain in the field. [4] As issued, the blade's secondary or false edge was intentionally sharpened and beveled for only a portion of its length, leaving an unsharpened spine on the top of the blade in an effort to stiffen the relatively narrow blade. [4] [2] [5] This limited the usefulness of the M3 when employed for backhand slashing strokes. [4]

After the Ordnance Department began developing a proprietary bayonet for use on the M1 carbine, it was realized that the new carbine bayonet, which already incorporated the M3 blade design and leather-wrap grip, could also replace the M3 in service in a secondary role as a fighting knife. The carbine bayonet, now designated the Bayonet, U.S. M4, was added to the Company Table of Organization in June 1944, and the M3 was declared to be a limited standard ordnance item, with supplies to be issued until exhausted. The final M3 production run did not take place until August 1944, by which time 2,590,247 M3 trench knives had been produced. [2]

At termination of production in August 1944, the M3 trench knife had one of the shortest production and service records of any U.S. combat knife. [2] The M3's blade design continued in U.S. military service in the form of the U.S. M4, M5, M6, and M7 bayonets.

Production

Approximate M3 production (1943–44)
by manufacturer		Number
Imperial Knife Co.854,015
Utica Cutlery Co.656,520
Camillus Cutlery Co.402,909
W.R. Case & Sons Co.300,465
Kinfolks, Inc.135,548
Pal Blade and Tool Co.121,131
Aerial Cutlery Co.51,784
Robeson Cutlery Co.36,575
H. Boker & Sons Co.31,300

Scabbards

The M3 was initially issued with a stitched and riveted leather M6 scabbard with a protective steel tip designed to prevent the point from piercing the sheath and injuring the wearer. [5] A rawhide thong on the end of the sheath allowed the user to tie the sheathed knife to his leg to prevent it from flapping when running. [5] U.S. paratroopers frequently wore an M3 and sheath tied to a boot for emergency use in cutting parachute lines or close-quarters defense. The M6 was quickly dropped in favor of the M8 scabbard. [2] [14] [5]

The M8 and the later M8A1 scabbards both have a resin-impregnated cotton canvas body, painted olive drab, with a steel throat. The early M8 scabbard only had a belt loop to fit over a pistol or trouser belt, and lacked the wire hook that earlier bayonet scabbards had for attaching to the M1910 series of load carrying equipment. The improved M8A1 scabbard manufactured later in WWII added the wire hook. Some M8 scabbards were later modified by adding the hook. The scabbard throat is stamped "US M8" or "US M8A1" on the flat steel part along with the manufacturer's initials. Later M8A1 scabbards were manufactured with a modified extended tab on the web hanger to provide more clearance for the M5 bayonet which rubbed against the wider bayonet handle. This sheath is also correct for all post-war U.S. bayonets including the M4, M5, M6, and M7.

See also

Related Research Articles

<span class="mw-page-title-main">Bayonet</span> Pointed weapon attached to the end of a firearm

A bayonet is a knife, dagger, sword, or spike-shaped weapon designed to fit on the end of the muzzle of a rifle, carbine, musket or similar firearm, allowing it to be used as a spear-like weapon. The term is traditionally derived from Bayonne, the town in south-west France where bayonets were supposedly first used by Basques in the 17th century. From the early 17th to the early 20th century, it was a melee weapon used by infantry for offensive and/or defensive tactics. Today, it is considered an ancillary weapon or weapon of last resort, although it is still used for ceremonial purposes.

<span class="mw-page-title-main">M1 carbine</span> Auto-loading carbine

The M1 carbine is a lightweight semi-automatic carbine that was issued to the U.S. military during World War II, the Korean War, and the Vietnam War. The M1 carbine was produced in several variants and was widely used by paramilitary and police forces around the world after World War II.

<span class="mw-page-title-main">Trench knife</span> Type of combat knife

A trench knife is a combat knife designed to kill or incapacitate an enemy at close quarters, such as in a trench or other confined area. It was developed as a close combat weapon for soldiers attacking enemy trenches during the First World War. An example of a World War I trench knife is the German Army's Nahkampfmesser.

<span class="mw-page-title-main">M9 bayonet</span> Bayonet

The M9 Bayonet, officially known as the M9 Phrobis III, is a multi-purpose knife and bayonet officially adopted in 1986 by the United States. It has a 7-inch (18 cm) blade and is issued with a sheath designed to double as a wire cutter.

<span class="mw-page-title-main">OKC-3S bayonet</span> Bayonet

The OKC-3S is a bayonet developed by the United States Marine Corps to replace the M7 bayonet and M9 bayonet as its service bayonet for the M16 family of rifles and M4 series carbine. This multipurpose bayonet provides greater durability than the M7 bayonet and it also functions as a fighting knife.

A combat knife is a fighting knife designed for military use and primarily intended for hand-to-hand or close combat fighting.

<span class="mw-page-title-main">37 mm gun M3</span> American anti-tank gun

The 37 mm gun M3 is the first dedicated anti-tank gun fielded by United States forces in numbers. Introduced in 1940, it became the standard anti-tank gun of the U.S. infantry with its size enabling it to be pulled by a jeep. However, the continuing improvement of German tanks quickly rendered the 37 mm ineffective and, by 1943, it was being gradually replaced in the European and Mediterranean theaters by the more powerful British-developed 57 mm gun M1. In the Pacific, where the Japanese tank threat was less significant, the M3 remained in service until the end of the war, but some 57mm guns were issued.

<span class="mw-page-title-main">M6 bayonet</span> Bayonet

The M6 Bayonet is a bayonet used by the U.S. military for the M14 rifle, it can also be used with the Mk 14 Enhanced Battle Rifle as well M39 Enhanced Marksman Rifle. It was introduced in 1957, at the same time as the rifle itself. It is the only bayonet made for the M14.

<span class="mw-page-title-main">M7 bayonet</span> Bayonet

The M7 bayonet is a bayonet that was used by the U.S. military for the M16 rifle, it can also be used with the M4 carbine as well as many other assault rifles, carbines, and combat shotguns. It can be used as a fighting knife and utility tool. It was introduced in 1964, when the M16 rifle entered service during the Vietnam War.

<span class="mw-page-title-main">M1905 bayonet</span> Sword bayonet

The Model of 1905 bayonet was made for the U.S. M1903 Springfield rifle. This designation was changed to Model 1905 in 1917, and then to M1905 in 1925, when the army adopted the M designation nomenclature. The M1905 bayonet has a 16 in (41 cm) steel blade and a 4 in (10 cm) handle with wooden or plastic grips. The bayonet also fits the U.S. M1 Garand rifle. From 1943 to 1945, a shorter, 10 in (25 cm), bladed version was produced with either black or dark red molded plastic grips, and designated the M1 bayonet. A number of M1905 bayonets were recalled from service, their blades cut down, and reissued as M1 bayonets. But the cut down version was not used in Vietnam.

<span class="mw-page-title-main">Howitzer Motor Carriage M8</span> WW2 US self-propelled gun

The 75 mm Howitzer Motor Carriage M8, also known as the M8 Scott, was a self-propelled howitzer vehicle of the United States in use during World War II. It was developed on the chassis of the M5 Stuart tank and was equipped with a M116 howitzer in an M7 mount.

<span class="mw-page-title-main">V-42 stiletto</span> World War II dagger issued to American and Canadian soldiers

The V-42 stiletto was a fighting knife issued during World War II to the First Special Service Force, a joint American/Canadian commando unit.

<span class="mw-page-title-main">United States Marine Raider stiletto</span> Dagger

The United States Marine Raider stiletto was issued to the Marine Raiders and 1st Canadian Parachute Battalion during World War II.

<span class="mw-page-title-main">Ek Commando Knife Co.</span> American combat knife brand produced by several different companies

Ek Commando Knife Co. or Ek Knives is an American combat knife brand produced by several different companies since the original founded by John Ek in 1941. In May 2014 the Ek brand was purchased by Ka-Bar, which began selling its versions of Ek knife designs in 2015. Although not officially issued gear, Ek Knives have seen use by US forces in six major conflicts: World War II, the Korean War, the Vietnam War, the Gulf War, both wars in Afghanistan and the Iraq War. Ek Knives manufactures Bowie-style blades, daggers, and a Fairbairn-Sykes MkII. President Franklin Delano Roosevelt, Clark Gable, and General George S. Patton have been identified as Ek knife owners.

<span class="mw-page-title-main">M5 bayonet</span> Bayonet

The M5 Bayonet was adopted by the U.S. military in 1953 to replace other bayonets for the M1 Garand rifle. It uses the M8A1 scabbard.

<span class="mw-page-title-main">Mark I trench knife</span> WW1 era American combat knife

The Mark I trench knife is an American trench knife designed by officers of the American Expeditionary Force (AEF) for use in World War I. It has a 6.75 in (17.1 cm) double-edged dagger blade useful for both thrusting and slashing strokes, unlike previous U.S. trench knives such as the M1917 and M1918. The handle is made of cast bronze and uses a conical steel nut to hold the blade in place. The Mark I's blade was blued with a black oxide finish, the bronze handle was chemically blackened, with cast spikes on the bow of each knuckle. The spikes were intended to prevent an opponent from grabbing the knife hand, as well as to provide a more concentrated striking surface when employed in hand-to-hand combat.

<span class="mw-page-title-main">Ka-Bar</span> Combat knife first adopted by the United States military in 1942

Ka-Bar is the contemporary popular name for the combat knife first adopted by the United States Marine Corps in November 1942 as the 1219C2 combat knife, and subsequently adopted by the United States Navy as the U.S. Navy utility knife, Mark 2. Ka-Bar is the name of a related knife manufacturing company, Ka-Bar Knives., Inc., of Olean, New York, a subsidiary of the Cutco Corporation.

<span class="mw-page-title-main">Fighting knife</span> Knife designed to inflict injury

A fighting knife has a blade designed to most effectively inflict injury in close-quarters physical confrontations. The combat knife and the trench knife are examples of military fighting knives.

<span class="mw-page-title-main">M4 bayonet</span> Bayonet

The M4 bayonet was introduced in 1944 for use with the M1 carbine. It was built on the M3 fighting knife.

References

  1. 1 2 "Edged Weapons: US M3 Knife".
  2. 1 2 3 4 5 6 7 8 9 10 11 12 Trzaska, Frank, (1996), U.S. Fighting Knives of World War II, Chapter VII: M3 Trench Knife , OKCA (May 1996)
  3. 1 2 3 Catalog of Standard Ordnance Items, Washington, D.C: U.S. Army Ordnance Publications (1943)
  4. 1 2 3 4 5 6 7 8 9 10 11 Cassidy, William L. (1997), The Complete Book of Knife Fighting, ISBN   0-87364-029-2, ISBN   978-0-87364-029-9 (1997), pp. 47-48
  5. 1 2 3 4 5 6 7 8 9 10 Whitman, L., New Army Trench Knife, Army & Navy Journal, Vol. 80, 6 February 1943, p. 649
  6. 1 2 3 Blending Metals to Arm Our Fighting Men, Popular Science, Vol. 142 No. 6 (June 1943), p. 104
  7. 1 2 3 Somers, R.H. (Brig. Gen., U.S. Army, ret.) (ed.), Ordnance, American Ordnance Association, Volume 24, No. 138 (May–June 1943), pp. 553-554
  8. 1 2 3 KNIFE – U.S. KNIFE MODEL 1918 MKI TRENCH Springfield Armory Museum – Collection Record
  9. 1 2 3 Canfield, Bruce N., U.S. INFANTRY WEAPONS OF WORLD WAR II, Lincoln, RI: Andrew Mowbray Publishers, ISBN   0-917218-67-1, ISBN   978-0-917218-67-5 (1994)
  10. ↑ Chambers, John W., OSS Training in the National Parks and Service Abroad in World War II, Washington, D.C., U.S. National Park Service (2008), p. 191
  11. ↑ Brunner, John W., OSS Weapons (2nd ed.), Williamstown, N.J.: Phillips Publications (2005), pp. 68-72
  12. ↑ Graf, John F., Warman's World War II Collectibles: Identification and Price Guide, Krause Publications, ISBN   978-0-89689-546-1 (2007), p. 217
  13. ↑ Foster, Lawrence G., Robert Wood Johnson: the gentleman rebel, (1st ed.), Lillian Press, ISBN   0-9662882-0-3, ISBN   978-0-9662882-0-9 (1999), p. 256, 263-264: The SWPC was chaired by industrial tycoon Robert Wood Johnson II, who was given a commission as a brigadier general. Johnson was known for overruling production item requests by the service branches in favor of designs that could be produced more quickly or more economically by small businesses with limited tooling, freeing up material for private industry to begin a reconversion to peacetime goods production.
  14. ↑ The History of the M4 Bayonet/Fighting Knife , MilitaryItems.com, retrieved 3 July 2011

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.