The Panzerkampfwagen III, commonly known as the Panzer III, was a medium tank developed in the 1930s by Germany, and was used extensively in World War II. The official German ordnance designation was Sd.Kfz. 141. It was intended to fight other armoured fighting vehicles and serve alongside and support the similar Panzer IV, which was originally designed for infantry support.
Initially the Panzer III had the same 3.7cm gun as the infantry used for anti-tank work but later models were given 5 cm gun. However, this was the largest gun that could be fitted within the limitations of the turret ring and it was insufficient against Soviet T-34 and KV-1 tanks. Instead the Panzer IV which had a larger turret ring, was redesigned to mount the long-barrelled 7.5 cm KwK 40 gun and became the main German tank. The Panzer III effectively swapped roles with the Panzer IV; from 1942 the last version of the Panzer III (Panzer III N) mounted the short barrelled 7.5 cm KwK 37 L/24 that the first Panzer IVs had been fitted with.
Production of the Panzer III ceased in 1943 but the Sturmgeschütz IIIassault gun which had been developed from the Panzer III chassis continued in production until the end of the war.
Development history
Background
At the time, German (non-light) tanks were expected to carry out one of two primary tasks when assisting infantry in breakthroughs, exploiting gaps in the enemy lines where opposition had been removed, moving through and attacking the enemy's unprotected lines of communication and the rear areas. The first task was direct combat against other tanks and other armoured vehicles, requiring the tank to fire armour piercing (AP) shells.[2]
On January 11, 1934, following specifications laid down by Heinz Guderian, the Army Weapons Department drew up plans for a medium tank with a maximum weight of 24,000kg (53,000lb) and a top speed of 35km/h (22mph).[3] It was intended as the main tank of the German Panzer divisions, capable of engaging and destroying opposing tank forces, and was to be paired with the Panzer IV, which was to fulfill the second use: dealing with anti-tank guns and infantry strong points, such as machine-gun nests, firing high-explosive shells at such soft targets. Such supportive tanks designed to operate with friendly infantry against the enemy generally were heavier and carried more armour.
The direct infantry-support role was to be provided by the turret-less Sturmgeschütz assault gun, which mounted a short-barrelled gun on a Panzer III chassis.[4]
Development
Daimler-Benz, Krupp, MAN, and Rheinmetall all produced prototypes. Testing of these took place in 1936 and 1937, leading to the Daimler-Benz design being chosen for production. The first model of the Panzer III, the Ausführung A. (Ausf. A), came off the assembly line in May 1937; ten, two of which were unarmed, were produced in that year.[5] Mass production of the Ausf. F version began in 1939. Between 1937 and 1940, attempts were made to standardize parts between Krupp's Panzer IV and Daimler-Benz's Panzer III.
Much of the early development work on the Panzer III was a quest for a suitable suspension. Several varieties of leaf-spring suspensions were tried on Ausf. A through Ausf. D, usually using eight relatively small-diameter road wheels before the torsion-bar suspension of the Ausf. E was standardized, using the six road wheel design that became standard. The Panzer III, along with the Soviet KV heavy tank, was one of the early tanks to use this suspension design first seen on the Stridsvagn L-60 a few years earlier.[6]
A distinct feature of the Panzer III, influenced by the British Vickers Medium Mark I tank (1924), was the three-man turret. This meant that the commander was not distracted with another role in the tank (e.g. as gunner or loader) and could fully concentrate on maintaining awareness of the situation and directing the tank. Most tanks of the time did not have this capability,[7] providing the Panzer III with a combat advantage versus such tanks. For example, the French Somua S-35's turret was manned only by the commander, and the Soviet T-34 originally had a two-man turret crew. Unlike the Panzer IV, the Panzer III had no turret basket, merely a foot rest platform for the gunner.[lower-alpha 1]
The Panzer III was intended as the primary battle tank of the German forces. However, when it initially met the KV-1 heavy tanks and T-34 medium tanks it proved to be inferior in both armour and gun power. To meet the growing need to counter these tanks, the Panzer III was up-gunned to the 5 cm KwK 39, a longer, more powerful 50-millimetre (1.97in) gun, and received more armour but still was at disadvantage compared with the Soviet tank designs. As a result, production of self-propelled anti-tank guns (Panzerjaeger), as well as the up-gunning of the Panzer IV was initiated.
In 1942, the final version of the Panzer III, the Ausf. N, was created with a 75-millimetre (2.95in) KwK 37 L/24 cannon, the same short-barreled low-velocity gun used for the initial models of the Panzer IV and designed for anti-infantry and close-support work. For defensive purposes, the Ausf. N was equipped with rounds of HEAT ammunition that could penetrate 70 to 100 millimetres (2.76 to 3.94in) of armour depending on the round's variant, but these were strictly used for self-defence.[9]
Armour
The Panzer III Ausf. A through C had 15mm (0.59in) of rolled homogeneous armour on all sides with 10mm (0.39in) on the top and 5mm (0.20in) on the bottom. This was quickly determined to be insufficient, and was upgraded to 30mm (1.18in) on the front, sides and rear in the Ausf. D, E, F, and G models, with the H model having a second 30mm (1.18in) layer of face-hardened steel applied to the front and rear hull. The Ausf. J model had a solid 50mm (1.97in) plate on the front and rear, while the Ausf. J¹, L, and M models had an additional layer of offset 20mm (0.79in) homogeneous steel plate on the front hull and turret, with the M model having an additional 5mm (0.20in)Schürzenspaced armour on the hull sides, and 8mm (0.31in) on the turret sides and rear.[10] This additional frontal armor gave the Panzer III frontal protection from many light and medium Allied and Soviet anti-tank guns at all but close ranges. However, the sides were still vulnerable to many enemy weapons, including anti-tank rifles at close ranges.
Armament
General Hermann Balck (standing left in the cupola) in a Panzerbefehlswagen III Ausf. H command tank in Greece in 1941. This vehicle is fitted with a dummy 37mm main gun and a dummy MG 34 co-axial machine gun but has an actual ball-mounted MG 34 machine gun on the right side of the turret's mantlet.
The Panzer III was intended to fight other tanks; in the initial design stage a 50-millimetre (1.97in) gun was specified. However, the infantry at the time were being equipped with the 37-millimetre (1.46in)PaK 36, and it was thought that, in the interest of standardization, the tanks should carry the same armament. As a compromise, the turret ring was made large enough to accommodate a 50-millimetre (1.97in) gun should a future upgrade be required. This single decision later assured the Panzer III a prolonged life in the German Army.[2]
The Ausf. A to early Ausf. G were equipped with a 3.7 cm KwK 36 L/45, which proved adequate during the campaigns of 1939 and 1940.[11] In response to increasingly better armed and armored opponents, the later Ausf. F to Ausf. J were upgraded with the 5 cm KwK 38 L/42,[12] and the Ausf. J¹ to M with the longer 5 cm KwK 39 L/60 gun.[13]
By 1942, the Panzer IV was becoming Germany's main medium tank because of its better upgrade potential. The Panzer III remained in production as a close support vehicle. The Ausf. N model mounted a low-velocity 7.5 cm KwK 37 L/24 gun - these guns had originally been fitted to older Panzer IV Ausf A to F1 models and had been placed in storage when those tanks had also been up armed to longer versions of the 75mm gun.[9]
All early models up to and including the Ausf. G had two 7.92mm (0.31in)MG 34machine guns mounted coaxially with the 37mm main gun and a similar weapon in a hull mount.[9] Models from the Ausf. F and later, upgraded or built with a 5 or 7.5cm main gun, had a single coaxial MG34 and the hull MG34.[14]
A single experimental Ausf. L was fitted with a 75/55mm tapered bore Waffe 0725 cannon. The vehicle was designated Panzer III Ausf L mit Waffe 0725.[15]
Mobility
Service inspection of a Panzer III Ausf. H in the field; the vehicle is lifted with the standard tank jack carried on-board and the tracks are being removed.Difference of suspension in all variants
The Panzer III Ausf. A through D were powered by a 250PS (184kW), 12-cylinder Maybach HL108 TR engine, giving a top speed of 35km/h (22mph).[5] All later models were powered by the 300PS (221kW), 12-cylinder Maybach HL 120 TRM engine. Regulated top speed varied, depending on the transmission and weight, but was around 40km/h (25mph).[16]
The fuel capacity was 300L (79USgal) in Ausf A-D, 310L (82USgal) in Ausf. E-G and 320L (85USgal) in all later models. Road range on the main tank was 165km (103mi) in Ausf. A-J; the heavier later models had a reduced range of 155km (96mi). Cross-country range was 95km (59mi) in all versions.[17][18][19]
A Panzerkampfwagen III Ausf. G, passes a defeated and burning Soviet T-28 tank in August 1941.
In both the Polish and French campaigns, the Panzer III formed a small part of the German armoured forces. Only a few hundred Panzer III Ausf. As to Fs were available in these two campaigns, with most being armed with the 37mm (1.46in) main gun. They were the best medium tank available to the German military at the period of time.
Aside from use in Europe, the Panzer III also saw service in North Africa with Erwin Rommel's renowned Afrika Korps from early 1941. Most of the Panzer IIIs with the Afrika Korps were equipped with the (short-barrelled) KwK 38 L/42 50mm tank gun, with a small number possessing the older 37mm main gun of earlier variants. The Panzer IIIs of Rommel's troops were capable of fighting against British Crusader cruiser and US-supplied M3 Stuart light tanks with positive outcomes, although they did less effectively against heavily armoured Matilda IIinfantry tanks and the American M3 Lee/Grant medium tanks (fielded by the British starting from early 1942). In particular, the 75mm hull-mounted gun of the Lee/Grant tank could easily destroy a Panzer III far beyond the latter's own effective firing range, as did the similarly equipped M4 Sherman, which first saw combat with British forces in North Africa in October 1942. [citation needed]
Around the time of the beginning of Operation Barbarossa in the summer of 1941, the Panzer III was, numerically, the most important German tank on the frontline. At this time period, the majority of the available tanks (including re-armed Ausf. Es and Fs, plus new Ausf. G and H models) for the invading German military had the 50mm (1.97in) KwK 38 L/42 50mm cannon.[23][additional citation(s) needed] Initially, the most numerous Soviet tanks the Germans encountered at the start of the invasion were older T-26 light infantry and BT class of cruiser tanks. This fact, together with superior German tactical and strategic skills in armoured clashes,[23] sufficient quality crew training, and the generally-good ergonomics of the Panzer III, all contributed to a favourable kill-loss ratio of approximately 6:1 for German tanks of all types in 1941.[citation needed] However, the Panzer IIIs were significantly outclassed by the more advanced Soviet T-34 medium and KV series of heavy tanks, the former of which was gradually encountered in greater numbers by the German forces as the invasion progressed.
With the appearance of the T-34 and KV-1/-2 tanks, rearming the Panzer III with a longer-barrelled and more powerful 50-millimetre (1.97in) gun was prioritised. The T-34 was generally invulnerable in frontal combat engagements with the Panzer III until the 50mm KwK 39 L/60 tank gun was introduced on the Panzer III Ausf. J beginning in the spring of 1942 (this tank gun was based on the infantry's 5 cm Pak 38 L/60 towed anti-tank gun). This could penetrate the T-34's heavy sloped armour frontally at ranges under 500 metres (1,600ft).[24] Against the KV class of heavy breakthrough tanks, the Panzer III was a significant threat if it was armed with special high-velocity tungsten-tipped armour-piercing (AP) rounds. In addition, to counter enemy anti-tank rifles, starting from 1943, the Ausf. L version began the use of spaced armour sideskirts and screens (known as Schürzen in German) around the turret and on the vulnerable hull-sides. However, due to the introduction of the upgunned and better armoured Panzer IV, the Panzer III was, after the German defeat at the Battle of Kursk in the summer of 1943, relegated to secondary/minor combat roles, such as tank-training, and it was finally replaced as the main German medium tank by the Panzer IV and the Panzer V Panther.
The Panzer III's strong, reliable and durable chassis was the basis for the turretless Sturmgeschütz III assault gun/tank destroyer, one of the most successful self-propelled guns of the war, as well as being the single most-produced German armoured fighting vehicle design of World War II.[4]
By the end of the war in 1945, the Panzer III saw almost no frontline use, and many of them had been returned to the few remaining armaments/tank factories for conversion into ammunition carriers or recovery vehicles. A few other variants of the Panzer III were also experimented on and produced by German industries towards the last phases of the war, but few were mass-produced or even saw action against the encroaching enemy forces of the Americans, British and Soviets.
Foreign users
In 1943, Turkey received 22 Panzer III Ausf. Ms, with Hitler hoping the country, militarily strengthened by Nazi Germany, could possibly threaten the Soviet Union from its southern border (in any case, neutral Turkey did not participate in any form of aggression towards the USSR or the Western Allies, and eventually declared war on Nazi Germany nearing the end of WWII instead, perhaps from Allied pressure).[25] The Army of the Independent State of Croatia received 4 Ausf. N variants in the spring of 1944 and the Ustashe Militia received 20 other Ausf. Ns in the autumn of 1944.[26]Romania received a number of Panzer III Ausf. Ns for its 1st Armored Division in 1943. They were called T-3 in the Romanian army. At least 2 of them were still operational in 1945.
Norway used leftover stocks of ex-German Panzer IIIs (along with similar Sturmgeschütz III assault guns/tank destroyers) abandoned by departing Nazi occupation forces at the end of WWII up until the 1950s. In the Soviet Union, the Panzer III was one of the more common captured Nazi tanks they operated, as with the Panzer IV. At least 200, together with some StuG IIIs, fell into Soviet hands following the German defeat at the Battle of Stalingrad. The Soviets decided to upgun these captured German vehicles and two resulting designs were produced: the SG-122 self-propelled howitzer and the SU-76i assault gun. The former was not well-designed and was only built in very small numbers, with most not seeing combat action at all, while the latter was regarded as a better option of a Panzer III-based assault vehicle with a larger 75mm main gun. Aside from these locally designed variants of the Panzer III, the Soviets primarily tended to use them as their basic tank version, mainly used as second-line tanks, for reconnaissance and as mobile command posts.[citation needed]
The Japanese government bought two Panzer IIIs from their German allies during the war (one 50mm and one 75mm). Purportedly this was for reverse engineering purposes, since Japan put more emphasis on the development of new military aircraft and naval technology and had been dependent on European influence in designing new tanks. By the time the vehicles were delivered, the Panzer III's technology was obsolete.[27]
Variants and production
Panzerkampfwagen III production - medium tanks[28]
Ausführung
A
B
C
D
E
F
G
H
J
L
M
N
Year
1937
1937
1937/38
1938,1940
1939
1939-41
1940/41
1940/41
1941/42
1941/42
1942/43
1942/43
Produced
10
10
15
25 + 5
96
450
594
286
1521
1470
517
614
Command tanks
Flame tank
Ausführung
D
E
H
J
K
Flamm
Year
1938/39
1939/40
1940/41
1941/42
1942/43
1943
Produced
30
45
175
81
50
100
Panzer III Ausf. A - Prototype 15ton vehicle; only 8 armed and saw service in Poland. Armed with 3.7cm KwK 36 L/46.5 main gun and two coaxial 7.92mm MG34 machine guns, and had a 250PS HL108 engine. Entered service in 1937 and taken out of service in 1940. It had a FuG 5 radio and a 360° hand-cranked turret.[5]
Panzer III Ausf. B - Prototype 15ton vehicle; some saw service in Poland. Entered service in 1937 and put out of service in 1940. They were reused as a training vehicle after 1940. They had slightly thicker armour, and an eight-wheel suspension rather than the five-wheel suspension with coil springs.[29]
Panzer III Ausf. C - Prototype 16-ton vehicle; some saw service in Poland, but were put out of service soon after. Slightly different suspension, which used leaf springs, than previous models.[30]
Panzer III Ausf. D - Prototype; some saw service in Poland and Norway, but withdrawn from service soon after. Turret upgraded to 30mm front, side and back. Hull armour remained the same. Hull rear was redesigned, and five vision slits added to the hull. Suspension slightly changed.[30]
Panzer III Ausf. E - Fifth version of the Panzer III with 30mm (1.2in) armour all-round, other than the rear of the vehicle, which increased the weight to 20t (22 short tons). Suspension redesigned, switching from leaf-springs to torsion-bars, now using six larger roadwheels per side. Had a 300PS HL120 engine.[16]
Panzer III Ausf. F - improved Ausf. E, first mass-production version, late production armed with 5cm KwK 38 L/42 main gun.[14]
Panzer III Ausf. G - Ausf F. with extra armour on the gun mantlet, late production armed with 5cm KwK 38 L/42 main gun.[14]
Panzer III Ausf. H - 5cm KwK 38 L/42 as standard gun. Bolt-on armour added to front and rear hull (30mm base + 30mm plates).[9]
Panzer III Ausf. I - A variant that was mentioned by Allied intelligence, but never existed. Possibly confused with the Ausf. J.[9]
Panzer III Ausf. J - The most common variant of the Panzer III, which served in North Africa and the Eastern Front. Hull and turret front armour increased to solid 50mm plate. Spaced armour was placed around the gun mantlet. Some were produced with 5 cm KwK 39 L/60 gun and later redesignated Ausf. L.[31]
Panzer III Ausf. K - Panzerbefehlswagen command tank variant based on the Ausf. M with a modified turret. Carried actual main armament rather than a dummy gun as found on other Panzer III command versions.[32]
Panzer III Ausf. L - Redesignated Ausf. J equipped with long 5cm gun, 20mm stand-off armour plates on hull and turret front.[9] It was also equipped with a new system for transferring heated engine coolant to another vehicle.[33]
Panzer III Ausf. M - Minor modifications of the ausf. L such as deep-wading exhaust and Schürzen side-armour panels.[9]
Panzer III Ausf. N - Infantry support tank, armed with a short-barrelled 7.5 cm KwK 37 L/24 gun. 700 were produced or re-equipped from 1942 and 1943.[9]
Ausf.G, captured by the British in North Africa (1941).
Ausf. H in the Musée des Blindés, Saumur.
Ausf. J, USSR (1942).
Ausf. L, The Tank Museum (2023)
Ausf. M, Deutsches Panzermuseum (2005)
Ausf. M with side skirts in southern USSR (1943)
Designs based on chassis
Panzerbeobachtungswagen III - Forward artillery observer tank. 262 converted from older Panzer III Ausf. E to H variants.[34]
Bergepanzer III - In 1944, 176 Panzer IIIs were converted to armoured recovery vehicles (ARVs). Mostly issued to formations with Tiger I heavy tanks.[35]
Flammpanzer III Ausf. M / Panzer III (Fl) - Flamethrower tank. 100 built on new Ausf. M chassis.[36]
Panzerbefehlswagen III - Command tank with long-range radios. Ausf. D, E and H: variants with dummy main guns;[4] Ausf. J and K: types armed with actual 5cm gun.[37]
Sturmgeschütz III - Assault gun/tank destroyer armed with a 75mm (2.95in) gun. Was the most produced German armored fighting vehicle during World War II.[38]
Sturmhaubitze 42 - Was an assault howitzer with thicker frontal armor and Schürzen that was armed with a modified variant of the 10.5 cm leFH 18 howitzer, that was electrically fired and fitted with a muzzle brake. Alkett produced 1,299 StuH 42 from March 1943 to 1945.[39]
The SovietSU-76i assault gun was based on the chassis of captured German Panzer IIIs and StuG IIIs after the Battle of Stalingrad in 1943. About 201 of these vehicles, many taken from Stalingrad itself, were converted at Factory No. 37 in Sverdlovsk that same year for Red Army service by removing the turret and constructing a fixed casemate in its place, installing a 76.2-millimetre (3.00in) S-1 tank gun (a cheaper version of the F-34 on the T-34 tank) in a limited-traverse gun mount. The armour was 35 millimetres (1.38in) thick on the casemate front, 50 millimetres (1.97in) in the hull front, and 30 millimetres (1.18in) on the hull sides. It was issued to tank and self-propelled gun units starting in the fall of 1943,[40] and finally withdrawn to training and testing uses in early 1944. Two SU-76is survive: one on a monument in the Ukrainian town of Sarny and a second on display in a military museum on Poklonnaya Hill in Moscow. It should not be confused with the similarly-named Soviet SU-76 assault gun series.
Tauchpanzer III - (Dive-tank III) Some tanks were converted to amphibious tanks for Operation Sea Lion. Unusually, they were designed to be able to stay underwater rather than to float like most other similar kinds of tanks. The idea was that they would be launched near to the invasion shoreline and then drive to dry land on the sea-bottom. The tank was totally waterproofed, the exhaust was fitted with a one-way valve and air intake for the engine and the crew compartment was through a hose.[4]
Munitionspanzer III - Some Panzer IIIs were converted into munitions carriers/tractors from obsolete Mk III hulls, simply by removing the turret. Several examples have been photoed supplying Tiger tank units.
↑ Some tanks used for training by the Hermann Göring Training and Replacement Regiment were pressed into service to oppose the British advance in Operation Market Garden.[citation needed]
Related Research Articles
The Tiger II was a German heavy tank of the Second World War. The final official German designation was Panzerkampfwagen Tiger Ausf. B, often shortened to Tiger B. The ordnance inventory designation was Sd.Kfz. 182.. It was also known informally as the Königstiger. Contemporaneous Allied soldiers usually called it the King Tiger or Royal Tiger.
The Panzer I was a light tank produced by Nazi Germany in the 1930s. Its name is short for Panzerkampfwagen I, abbreviated as PzKpfw I. The tank's official German ordnance inventory designation was Sd.Kfz. 101.
The Panzer II is the common name used for a family of German tanks used in World War II. The official German designation was Panzerkampfwagen II.
The Panzerkampfwagen IV, commonly known as the Panzer IV, is a German medium tank developed in the late 1930s and used extensively during the Second World War. Its ordnance inventory designation was Sd.Kfz. 161.
This article lists production figures for German armored fighting vehicles during the World War II era. Vehicles include tanks, self-propelled artillery, assault guns and tank destroyers.
The Panzerkampfwagen 38(t), originally known as the ČKD LT vz. 38, was a tank designed during the 1930s, which saw extensive service during World War II. Developed in Czechoslovakia by ČKD, the type was adopted by Nazi Germany following the annexation of Czechoslovakia. With the German Army and other Axis forces, the type saw service in the invasions of Poland, France and the USSR. Production ended in 1942, when its main armament was deemed inadequate. In all, over 1,400 Pz. 38(t)s were manufactured. The chassis of the Pz. 38(t) continued to be produced for the Marder III (1942–1944) with some of its components used in the later Jagdpanzer 38 (1944–1945) tank destroyer and its derivative vehicles.
The Panther tank, officially Panzerkampfwagen V Panther with ordnance inventory designation: Sd.Kfz. 171, is a German medium tank of World War II. It was used on the Eastern and Western Fronts from mid-1943 to the end of the war in May 1945.
The Sturmgeschütz III was an assault gun produced by Germany during World War II. It was the most-produced fully tracked armoured fighting vehicle, and second-most produced German armored combat vehicle of any type after the Sd.Kfz. 251 half-track. It was built on a slightly modified Panzer III chassis, replacing the turret with an armored, fixed superstructure mounting a more powerful gun. Initially intended as a mobile assault gun for direct-fire support for infantry, the StuG III was continually modified, and much like the later Jagdpanzer vehicles, was employed as a tank destroyer.
The 15 cm sIG 33 (Sf) auf Panzerkampfwagen 38(t), also known as Grille was a series of self-propelled artillery vehicles used by Nazi Germany during World War II. The Grille series was based on the Czech Panzer 38(t) tank chassis and used a 15 cm sIG 33 infantry gun.
Nazi Germany developed numerous tank designs used in World War II. In addition to domestic designs, Germany also used various captured and foreign-built tanks.
The 7.5 cm KwK 37 L/24(7.5 cm Kampfwagenkanone 37 L/24) was a short-barreled, howitzer-like German 75 mm tank gun used during World War II, primarily as the main armament of the early Panzer IV tank. Slightly modified as StuK 37, it was also mounted in early StuG III assault guns.
The 7.5 cm KwK 40 was a German 75 mm Second World War era vehicle-mounted gun, used as the primary armament of the German Panzer IV medium tank and the Sturmgeschütz III and Sturmgeschütz IV assault guns which were used as tank destroyers.
The 5 cm KwK 38 L/42(5 cm Kampfwagenkanone 38 L/42) was a German 50 mm calibre cannon used as the main armament of variants of the German Sd.Kfz. 141 Panzerkampfwagen III medium tank during the Second World War..
The 5 cm KwK 39 L/60(5 cm Kampfwagenkanone 39 L/60) was a German 50 mm calibre tank gun used during the Second World War, primarily as the main armament of later models of the German Panzer III tank from December 1941 onwards. It was produced when the well-armoured T-34 and KV-1 tanks were encountered in ever increasing numbers on the Eastern Front, although it was only partially successful in its role. It was later superseded by the 7.5 cm KwK 40 L/43.
The Bergepanzerwagen V, often referred to as the "Bergepanther", was an armoured recovery vehicle used by the German Army in WWII. It was a variant of the Panzerkampfwagen V Panther.
The 10.5 cm K gepanzerte Selbstfahrlafette, also known as the Panzer Selbstfahrlafette IV Ausf. A was a prototype self-propelled gun used by Nazi Germany during World War II. Although it was originally designed as a Schartenbrecher for use against the French Maginot Line defences, following the defeat of France in 1940, it was evaluated for use as a tank destroyer on the Eastern Front.
This article deals with the tanks serving in the German Army throughout history, such as the World War I tanks of the Imperial German Army, the interwar and World War II tanks of the Nazi German Wehrmacht, the Cold War tanks of the West German and East German Armies, all the way to the present day tanks of the Bundeswehr.
The Schmalturm was a tank turret designed for use on the Panther Ausf. F medium tank. There was a Krupp proposal to fit it onto the Panzer IV medium tank as well. It featured a narrow front to maximize protection while minimizing weight. It was both lighter and easier to manufacture than the standard Panther turret. The turret had a stereoscopic rangefinder with lenses on either side of the turret, located in spherical bulges. No Schmalturms entered series production.
References
Citations
↑ Jentz, T. (1996). Panzertruppen: The Complete Guide to the Creation & Combat Employment of Germany's Tank Force 1933–1942. Schiffer. page 279.
↑ Ralph Zuljan (July 1, 2003). "AFV Development During World War II". onwar.com (reviseded.). Archived from the original on November 26, 2010. Retrieved January 16, 2011. Originally published in "World War II" at Suite101.com on October 1, 1998.
Caruthers, Bob (2013). The Panzer III. Pen and Sword. ISBN9781781592069.
Doyle, Hilary Louis & Jentz, Thomas L. (2023). Flakpanzer IV and Other Flakpanzer Projects. Panzer Tracts. Vol.12–1 (reviseded.). Old Heathfield, UK: Panzerwrecks. ISBN978-1-915969-18-7.
Gander, Terry J. Tanks in Detail; PzKpfw III Ausf A to NISBN0-7110-3015-4.
Green, Michael; Anderson, Thomas; Schultz, Frank. German Tanks of World War II. London, UK: Zenith Imprints. ISBN9781610607209.
Perrett, Bryan (1999). Panzerkampfwagen III: Medium Tank 1936–44. Oxford, UK: Osprey Publishing. ISBN1-85532-845-3.
Tucker-Jones, Anthony (2017). Panzer III: Hitler's Beast of Burden. Pen and Sword. ISBN9781473891081.
Zaloga, Steven J. (2007). Japanese Tanks 1939–45. Oxford: Osprey. p.48. ISBN978-1-84603-091-8.
Zaloga, Steven J. (1994). T-34/76 Medium Tank 1941–1945. Oxford: Osprey. p.48. ISBN1-85532-382-6.
Zaloga, Steven J.; Grandsen, James (1984). Soviet Tanks and Combat Vehicles of World War Two. London: Arms and Armour Press. ISBN0-85368-606-8.
External links
Wikimedia Commons has media related to Panzer III.
Surviving Panzer III tanks - A PDF file presenting the Panzer III tanks (PzKpfw. III, Flammpanzer III, StuIG33B, SU-76i, Panzerbeobachtungswagen III tanks) still existing in the world
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
