Remington Model 597

Last updated
Remington Model 597
Rem 597.jpg
Type Rifle
Place of originUnited States
Production history
Designed1997
Manufacturer Remington Arms
Produced1997–2019
Specifications (standard model [1] )
Mass5.5 lb (2.5 kg)
Length40 in (100 cm)
Barrel  length20 in (51 cm)

Cartridge .22 LR, .22 WMR, .17 HMR (obsolete)
Action semi-automatic
Muzzle velocity 350 to 1750 ft/s (110 to 530 m/s)
Maximum firing range2.0 miles or 3.2 km
Feed system10-round detachable magazine (.22 LR) 8-round magazine (.22 WMR / .17 HMR) or 30-round magazine (aftermarket)

The Remington Model 597 is an American semi-automatic rifle that was manufactured by Remington Arms at the company's Mayfield, Kentucky and Huntsville, Alabama plant. The .22 Long Rifle version has a removable 10-round magazine, while the magazines for the larger .22 WMR and .17 HMR cartridges hold eight rounds.

Contents

The .22 LR and .22 WMR versions began production in 1997, and the .17 HMR version in 2002. Remington announced that the 597 had been discontinued in 2019. [2]

Overview and variants

The Remington 597, a competitor to the Marlin Model 795, the Mossberg 702 Plinkster, and the Ruger 10/22, was available in a number of configurations, with both synthetic and laminated wood stock options. The standard barrel length is 20 inches. Its unique bolt-guidance system uses two steel guide rails, and the bolt locks in the open position when the last round is fired.

The receiver has integral 11 mm dovetail rail (sometimes called "tip-off" scope mounts), as well as pre-drilled and tapped mount points that will accommodate an optional Weaver-style scope base. The "tip-off" mounts are suitable only for small, light scopes for air rifle or rimfire use. For heavier scopes, the Weaver base is recommended rather than the tip-off mounts, since the greater mass may cause the scope to shift and "lose zero."

A target model is available with a 16.5-inch bull barrel with no sights, as well as a "tactical" variant that is all black with a threaded barrel tip to accommodate a flash hider, muzzle brake or suppressor. Two exclusive models sold by Dick's Sporting Goods come with a 3–9× scope, with one having a 20-inch bull barrel.

Remington 597 HB 16.5 inch barrel with a green stock Remington-597-HB.jpg
Remington 597 HB 16.5 inch barrel with a green stock

Magazines

The 597 had at least four generations of magazines. Early magazines were made of plastic and caused a number of feeding problems when loaded with more than three to four rounds. This early magazine was seen as a major detractor to what was otherwise a good rifle. As the magazine aged and dirt, oil and unburned powder got ground into the magazine and the follower, the feeding problems could increase.

The second generation of magazines was made from investment-cast aluminum alloy. These were available for purchase in the year 2000. The base cap and follower were still made of plastic. This new magazine was a great improvement over the first generation. The new-style magazine was shipped with the later rifles. These magazines were also available separately for purchase.

The third generation of magazines was very similar to the second generation with only small differences, but a noticeable improvement in reliability. Third-generation magazines can be identified by the number "10" stamped on the side; the second generation has just "10", while the third generation also has a circle stamped around the number. [3]

The fourth-generation magazine features a black coating which is intended to improve feed reliability.

Aftermarket extended-capacity magazines are also available.

Aftermarket parts

The 597 is gaining more aftermarket parts, but it still lacks the enormous variety of the Ruger 10/22, which is its competitor in the marketplace. There are now aftermarket barrels, iron sights, hammers and extractors available for the Model 597, as well as the magazines noted earlier. Volquartsen Custom offers aftermarket barrels, hammers, and extractors. [4] Tech-SIGHTS offers adjustable aperture sights. [5]

Model history

Recall information

In October 2014, Remington warned customers to discontinue use of the Model 597 in .17 HMR due to safety issues. The company offered reimbursement coupons for all Model 597 rifles chambered in .17 HMR, along with any Remington-brand .17 HMR ammunition, upon return to Remington. [6] [7]

Related Research Articles

<span class="mw-page-title-main">Rimfire ammunition</span> Type of ammunition common in low-caliber firearms

Rimfire ammunition (RF) is a type of firearm metallic cartridge whose primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845, by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the mid-19th century onwards, such as pinfire, only small caliber rimfire and centerfire cartridges have survived to the present day with regular usage. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition in the world today in terms of units sold.

The Steyr Scout is an Austrian bolt-action rifle manufactured by Steyr Mannlicher, and chambered primarily for 7.62 NATO, although other caliber options in 5.56×45mm NATO, .243 Winchester, 6.5 Creedmoor, .376 Steyr and 7mm-08 Remington are also offered commercially. It is intended to fill the role of a versatile, lightweight all-around rifle as specified in Jeff Cooper's scout rifle concept. Apart from the barrel and action, the gun is made primarily of polymers and is designed to be accurate to at least 800 m (870 yd).

Savage Arms is an American gunmaker based in Westfield, Massachusetts, with operations in Canada. Savage makes a variety of rimfire and centerfire rifles, as well as Stevens single-shot rifles and shotguns. The company is best known for the Model 99 lever-action rifle, no longer in production, and the .300 Savage. Savage was a subsidiary of Vista Outdoor until 2019 when it was spun off.

<span class="mw-page-title-main">.22 Winchester Magnum Rimfire</span> Rimfire cartridge

The .22 Winchester Magnum Rimfire, also called .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, or .22 Mag, is a rimfire cartridge. Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 grains (1.9 g) at 2,200 feet per second (670 m/s).

The Ruger 10/22 is a series of semi-automatic rifles produced by American firearm manufacturer Sturm, Ruger & Co., chambered for the .22 Long Rifle rimfire cartridge. It uses a patented 10-round rotary magazine, though higher capacity box magazines are also available. The standard carbine version of the Ruger 10/22 has been in production continuously since 1964, making it one of the most successful rimfire rifle designs in history, with numerous third party manufacturers making parts and accessories for upgrading and customization. The 10/22's aftermarket is so prolific that a complete 10/22 can be built without using any Ruger-made components.

<span class="mw-page-title-main">SAKO</span> Finnish firearm manufacturer

SAKO, Limited is a Finnish firearm and ammunition manufacturer located in Riihimäki, Tavastia Proper in southern Finland. It also has owned the Tikka brand of bolt-action rifles since 1983, and is now owned by the Italian firearm holding company Beretta Holding.

Marlin Firearms Co. is an American manufacturer of semi-automatic, lever-action, and bolt-action rifles. In the past, the company, now based in Madison, North Carolina, and formerly based in North Haven, Connecticut, made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.

<span class="mw-page-title-main">.17 HMR</span> Rifle cartridge

.17 Hornady Magnum Rimfire, commonly known as the .17 HMR, is a rimfire rifle cartridge developed by Hornady in 2002. It was developed by necking down a .22 Magnum case to take a .17 caliber (4.5 mm) projectile. Commonly loaded with a 17 grain projectile, it can deliver muzzle velocities in excess of 775 m/s (2,650 ft/s).

<span class="mw-page-title-main">H&R Firearms</span> Firearms brand

H&R 1871, LLC, or more commonly known as Harrington & Richardson, is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

The Marlin Model 60, also known as the Marlin Glenfield Model 60, is a semi-automatic rifle that fires the .22 LR rimfire cartridge. Produced by Remington Arms in Huntsville, Alabama formerly in Mayfield, Kentucky, formerly by Marlin Firearms Company of North Haven, Connecticut, it was in continuous production from 1960 to 2020 and the company says it is the most popular rifle of its kind in the world. Major features include a micro-groove barrel, a cross-bolt safety, hardwood stock with Monte Carlo comb, and brass or blued steel inner magazine tube. The Marlin Model 795 is a very similar rifle and based on the Marlin Model 60, changed only to accept a detachable box magazine.

<span class="mw-page-title-main">Ruger Model 77 rotary magazine</span> Bolt-action rifle

The Ruger 77/22 is a bolt-action rimfire rifle chambered for the .22 Long Rifle, .22 WMR, or .22 Hornet. It has a removable rotary magazine which allows the magazine to fit flush with the bottom of the stock. The 77/22 was introduced in 1983 and was based on the centerfire Model 77 Mark II. Each rifle comes with scope rings and a lock.

<span class="mw-page-title-main">Ruger Single-Six</span> Single action

The Ruger Single-Six is a single-action rimfire revolver produced by Sturm, Ruger & Co. The Single-Six was first released in June 1953.

The CZ 452 also known as BRNO Model Two .22 Rifle is a series of magazine-fed bolt-action rimfire repeating rifles manufactured by the Czech firearms manufacturer Česká Zbrojovka Uherský Brod and imported into the United States by CZ-USA. Most versions of the 452 rifle series were discontinued in 2011 and replaced by the CZ 455, although CZ continues to offer the CZ 452 American in a left-hand model, with the bolt handle and ejection port located on the left side of the rifle.

<span class="mw-page-title-main">5mm Remington Rimfire Magnum</span> Bottlenecked rimfire cartridge introduced by Remington Arms Company

The 5 mm Remington Rimfire Magnum or 5 mm RFM is a bottlenecked rimfire cartridge introduced by Remington Arms Company in 1969. Remington chambered it in a pair of bolt-action rifles, the Model 591 and Model 592, but this ammunition never became very popular, and the rifles were discontinued in 1974. About 52,000 rifles and 30,000 barrels for the T/C Contender pistol were sold during its brief production run. Remington discontinued the cartridge itself in 1982, leaving owners with no source of ammunition.

The CZ-550 is a bolt-action hunting rifle series manufactured by Česká zbrojovka Uherský Brod. The CZ 550 series is available with a medium or magnum sized action. The CZ 550 rifle is based on the Mauser 98 rifle.

The Howa 1500 or Howa M1500 is a bolt-action rifle produced in Japan by Howa Machinery. Introduced in 1979, it has been used by hunters as a hunting rifle with various cartridge offerings. It is also utilized by military and law enforcement elements as a sniper rifle. It is sold under the name of Howa Model 1500 Rifle for overseas markets.

<span class="mw-page-title-main">Blaser R8</span> Straight-pull rifle

The Blaser R8 is a German straight-pull rifle known for its radially locking bolt system, modularity and its barrel mounted scope mount manufactured by Blaser. The rifle also features a manual cocking system and a direct trigger. In 2015 there had been produced more than 100,000 complete Blaser R8 rifles.

The Ruger American Rifle is a family of budget-level hunting/sporting bolt-action centerfire rifle made by Sturm, Ruger & Co., which also produces a line of rimfire rifles with similar designs called the Ruger American Rimfire.

<span class="mw-page-title-main">Ruger Model 96</span> Lever-action rifle

The Ruger Model 96 is a series of lever-action rifles produced by Sturm, Ruger & Co. They featured a short-throw lever action, cross button safety and a visible cocking lever. The 4 different variants of the Model 96 represented the four calibers the rifle came in: 96/17 for .17 HMR, 96/22 for .22 LR, 96/22M for .22 Magnum and 96/44 for .44 Magnum. All four models had a hardwood stock.

Ruger American Rimfire is a rimfire bolt-action rifle manufactured by Sturm, Ruger & Co. in the United States. The firearm has some visual similarities with the larger centerfire Ruger American Rifle, and both are marketed as budget hunting rifles.

References

  1. "Model 597 HB". Remington Arms. Archived from the original on 29 November 2014. Retrieved 25 November 2014.
  2. "Model 597 | Remington". Archived from the original on 25 May 2020.
  3. 597 magazine comparison - RimfireCentral.com Forums
  4. Volquartsen Custom
  5. "Home". tech-sights.com.
  6. "Safety Warning And Recall Notice". www.remington.com. Archived from the original on 17 January 2010.
  7. "17 HMR Ammunition Product Warning".