Chief Engraver of the United States Mint

Last updated
Chief Engraver of United States Mint
Incumbent
Joseph Menna
since February 2019
United States Mint
Formation1792
First holder Robert Scot

The Chief Engraver of the United States Mint is the highest staff member at the United States Mint.

The Chief Engraver is the person in charge of coin design and engraving of dies at all four United States Mints: Philadelphia, Denver, San Francisco and West Point. The position was created by Congress with the Coinage Act of 1792, and placed within the Department of Treasury that produces circulating coinage for the United States. In 1990 after the resignation of Elizabeth Jones, the post of Chief Engraver was left vacant, and in 1996, with Public Law 104-208, was abolished by Congress. [1]

On February 3, 2009, Mint Director Edmund C. Moy, appointed John Mercanti to the position of Chief Engraver, with duties and prerogatives determined by the Mint’s Office of Public Affairs. The appointment was not a restoration of the original congressionally approved office, but a temporary promotion, renewable annually for one officeholder for no more than five years. Following Mercanti's retirement in 2010, the post remained vacant until February 2019, when Joseph Menna was appointed to the position.

List of Chief Engravers

ImageNameTenure
Robert Scot 1793 until his death in 1823
William Kneass.jpg William Kneass 1824 until his death in 1840
Christian Gobrecht.jpg Christian Gobrecht 1840 until his death in 1844
James Barton Longacre - Ambrotype by Isaac Rehn, 1855b.jpg James B. Longacre 1844 until his death in 1869
Photo of William Barber, c. 1870s.jpg William Barber 1869 until his death in 1879 [2]
Charlesbarber.jpg Charles E. Barber 1880 until his death in 1917 [3]
George Thomas Morgan (1845-1925) portrait.jpg George T. Morgan 1917 until his death in 1925
Johnsinnock.jpg John R. Sinnock 1925 until his death in 1947
Gilroy Roberts 1948 to 1964
Frank Gasparro 1965 to 1981
Elizabeth Jones 1981 to 1991
Vacant1991 to 2006
United States Mint engraver John Mercanti.jpg John Mercanti 2006 to 2010
Vacant2010 to 2019
Joseph Menna Feb 2019 to present

Related Research Articles

<span class="mw-page-title-main">Nickel (United States coin)</span> Current denomination of United States currency

A nickel is a five-cent coin struck by the United States Mint. Composed of cupronickel, the piece has been issued since 1866. Its diameter is 0.835 inches (21.21 mm) and its thickness is 0.077 inches (1.95 mm).

<span class="mw-page-title-main">United States Mint</span> Government agency that produces circulating coinage for the United States

The United States Mint is a bureau of the Department of the Treasury responsible for producing coinage for the United States to conduct its trade and commerce, as well as controlling the movement of bullion. The U.S. Mint is one of two U.S. agencies that produce money in the case of minting coinage; the other is the Bureau of Engraving and Printing, which prints paper currency. The first United States Mint was created in Philadelphia in 1792, and soon joined by other centers, whose coins were identified by their own mint marks. There are currently four active coin-producing mints: Philadelphia, Denver, San Francisco, and West Point.

<span class="mw-page-title-main">Dime (United States coin)</span> Current denomination of United States currency

The dime, in United States usage, is a ten-cent coin, one tenth of a United States dollar, labeled formally as "one dime". The denomination was first authorized by the Coinage Act of 1792.

<span class="mw-page-title-main">Liberty Head nickel</span> American five-cent piece

The Liberty Head nickel, sometimes referred to as the V nickel because of its reverse design, is an American five-cent piece. It was struck for circulation from 1883 until 1912, with at least five pieces being surreptitiously struck dated 1913. The obverse features a left-facing image of the goddess of Liberty.

<span class="mw-page-title-main">Mercury dime</span> 10 cent coin minted in the USA between 1916 and 1945

The Mercury dime is a ten-cent coin struck by the United States Mint from late 1916 to 1945. Designed by Adolph Weinman and also referred to as the Winged Liberty Head dime, it gained its common name because the obverse depiction of a young Liberty, identifiable by her winged Phrygian cap, was confused with the Roman god Mercury. Weinman is believed to have used Elsie Stevens, the wife of lawyer and poet Wallace Stevens, as a model. The coin's reverse depicts a fasces, symbolizing unity and strength, and an olive branch, signifying peace.

<span class="mw-page-title-main">William Barber (engraver)</span>

William Barber was Chief Engraver of the United States Mint from 1869 until his death in 1879. He succeeded James B. Longacre in the position.

<span class="mw-page-title-main">Charles E. Barber</span> American engraver (1840–1917)

Charles Edward Barber was an American coin engraver who served as the sixth chief engraver of the United States Mint from 1879 until his death in 1917. He had a long and fruitful career in coinage, designing most of the coins produced at the mint during his time as chief engraver. He did full coin designs, and he designed about 30 medals in his lifetime. The Barber coinage were named after him. In addition, Barber designed a number of commemorative coins, some in partnership with assistant engraver George T. Morgan. For the popular Columbian half dollar, and the Panama-Pacific half dollar and quarter eagle, Barber designed the obverse and Morgan the reverse. Barber also designed the 1883 coins for the Kingdom of Hawaii, and also Cuban coinage of 1915. Barber's design on the Cuba 5 centavo coin remained in use until 1961.

<span class="mw-page-title-main">Twenty-cent piece (United States coin)</span> Coin of the United States (1875–1878)

The American twenty-cent piece is a coin struck from 1875 to 1878, but only for collectors in the final two years. Proposed by Nevada Senator John P. Jones, it proved a failure due to confusion with the quarter, to which it was close in both size and value.

<span class="mw-page-title-main">Seated Liberty dollar</span> United States silver dollar coin minted from 1840 to 1873

The Seated Liberty dollar was a dollar coin struck by the United States Mint from 1840 to 1873 and designed by its chief engraver, Christian Gobrecht. It was the last silver coin of that denomination to be struck before passage of the Coinage Act of 1873, which temporarily ended production of the silver dollar for American commerce. The coin's obverse is based on that of the Gobrecht dollar, which had been minted experimentally from 1836 to 1839. However, the soaring eagle used on the reverse of the Gobrecht dollar was not used; instead, the United States Mint (Mint) used a heraldic eagle, based on a design by late Mint Chief Engraver John Reich first utilized on coins in 1807.

<span class="mw-page-title-main">Walking Liberty half dollar</span> 1916–1947 coin issued by the United States Mint

The Walking Liberty half dollar is a silver 50-cent piece or half dollar coin that was issued by the United States Mint from 1916 to 1947; it was designed by Adolph A. Weinman, a well-known sculptor and engraver.

<span class="mw-page-title-main">Standing Liberty quarter</span> US 25-cent coin minted 1916-1930

The Standing Liberty quarter is a 25-cent coin that was struck by the United States Mint from 1916 to 1930. It succeeded the Barber quarter, which had been minted since 1892. Featuring the goddess of Liberty on one side and an eagle in flight on the other, the coin was designed by American sculptor Hermon Atkins MacNeil.

<span class="mw-page-title-main">Barber coinage</span> American coins

The Barber coinage consists of a dime, quarter, and half dollar designed by United States Bureau of the Mint Chief Engraver Charles E. Barber. They were minted between 1892 and 1916, though no half dollars were struck in the final year of the series.

<span class="mw-page-title-main">Trade dollar (United States coin)</span> Silver coin for use in East Asia (1873–1885)

The United States trade dollar was a dollar coin minted by the United States Mint to compete with other large silver trade coins that were already popular in East Asia. The idea first came about in the 1860s, when the price of silver began to decline due to increased mining in the western United States. A bill providing in part for the issuance of the trade dollar was eventually put before Congress, where it was approved, and signed into law as the Coinage Act of 1873. The act made trade dollars legal tender up to five dollars. A number of designs were considered for the trade dollar, and an obverse and reverse created by William Barber were selected.

Elizabeth Jones was the eleventh Chief Engraver of the United States Mint, holding this position from 1981 until her resignation in 1991. After her resignation, the post of Chief Engraver was left vacant for 15 years until John Mercanti was appointed to the post.

<span class="mw-page-title-main">John Mercanti</span> American sculptor and engraver (born 1943)

John M. Mercanti is an American sculptor and engraver. He was the twelfth Chief Engraver of the United States Mint until his retirement in late 2010.

<span class="mw-page-title-main">James B. Longacre</span> American portraitist and engraver (1794–1869)

James Barton Longacre was an American portraitist and engraver, and the fourth chief engraver of the United States Mint from 1844 until his death. Longacre is best known for designing the Indian Head cent, which entered commerce in 1859, and for the designs of the Shield nickel, Flying Eagle cent and other coins of the mid-19th century.

<span class="mw-page-title-main">Louisiana Purchase Exposition gold dollar</span> United States commemorative coin

The Louisiana Purchase Exposition gold dollar is a commemorative coin issue dated 1903. Struck in two varieties, the coins were designed by United States Bureau of the Mint Chief Engraver Charles E. Barber. The pieces were issued to commemorate the Louisiana Purchase Exposition held in 1904 in St. Louis; one variety depicted former president Thomas Jefferson, and the other, the recently assassinated president William McKinley. Although not the first American commemorative coins, they were the first in gold.

<span class="mw-page-title-main">Liberty Head double eagle</span> American twenty-dollar gold piece

The Liberty Head double eagle or Coronet double eagle is an American twenty-dollar gold piece struck as a pattern coin in 1849, and for commerce from 1850 to 1907. It was designed by Mint of the United States Chief Engraver James B. Longacre.

<span class="mw-page-title-main">Lafayette dollar</span> Silver coin issued as part of the United States participation in the Paris Worlds Fair of 1900

The Lafayette dollar was a silver coin issued as part of the United States' participation in the Paris World's Fair of 1900. Depicting Gilbert du Motier, Marquis de Lafayette with George Washington, and designed by Chief Engraver Charles E. Barber, it was the only U.S. silver dollar commemorative prior to 1983, and the first U.S. coin to depict American citizens.

<span class="mw-page-title-main">Susan B. Anthony dollar</span> United States dollar coin depicting Susan B. Anthony

The Susan B. Anthony dollar is a United States dollar coin minted from 1979 to 1981 when production was suspended due to poor public acceptance, and then again in 1999. Intended as a replacement for the larger Eisenhower dollar, the new smaller one-dollar coin went through testing of several shapes and compositions, but all were opposed by the vending machine industry, a powerful lobby affecting coin legislation. Finally, a round planchet with an eleven-sided inner border was chosen for the smaller dollar.

References

  1. "Chief Engravers of the United States Mint - CoinFactsWiki".
  2. Frost, John (Summer 2018). "In Search of the Forgotten Liberty Seated Engraver William Barber". Gobrecht Journal, Liberty Seated Collectors Club. 44 #2: 5–16.
  3. Frost, John (Spring 2018). "In Search of Charles Barber". Journal of the Barber Coin Collectors' Society. 29, #1: 20–27.