Digital Cinema Initiatives, LLC (DCI) is a consortium of major motion picture studios, formed to establish specifications for a common systems architecture for digital cinema systems.
The primary purpose of DCI is to establish and document specifications for an open architecture for digital cinema that ensures a uniform and high level of technical performance, reliability and quality.[1] By establishing a common set of content requirements, distributors, studios, exhibitors, d-cinema manufacturers and vendors can be assured of interoperability and compatibility. Because of the relationship of DCI to many of Hollywood's key studios, conformance to DCI's specifications is considered a requirement by software developers or equipment manufacturers targeting the digital cinema market.
Specification
On July 20, 2005, DCI released Version 1.0 of its "Digital Cinema System Specification", commonly referred to as the "DCI Specification". The document describes overall system requirements and specifications for digital cinema. Between March 28, 2006, and March 21, 2007, DCI issued 148 errata to Version 1.0.
DCI released Version 1.1 of the DCI Specification on April 12, 2007, incorporating the previous 148 errata into the DCI Specification. On April 15, 2007, at the annual NAB Digital Cinema Summit, DCI announced the new version, as well as some future plans. They released the "Stereoscopic Digital Cinema Addendum"[2] to begin to establish 3-D technical specifications in response to the popularity of 3-D stereoscopic films. It was also announced "which studios would take over the leadership roles in DCI after the current leadership term expires at the end of September."[3]
Subsequently, between August 27, 2007, and February 1, 2008, DCI issued 100 errata to Version 1.1. So, DCI released Version 1.2 of the DCI Specification on March 7, 2008, again incorporating the previous 100 errata into the specification document. An additional 96 errata were issued by August 30, 2012, so a revised Version 1.2 incorporating those additional errata was approved on October 10, 2012. DCI approved DCI Specification Version 1.3 on June 27, 2018, integrating the 45 errata issued to the previous version into a new document.
On July 20, 2020, fifteen years to the day after Version 1.0, DCI issued a new DCI Specification Version 1.4[4] that assimilated 29 errata issued since Version 1.3. On October 13, 2021, DCI approved a new DCI Specification Version 1.4.1[5] that integrated the 23 errata that had been issued to DCI Specification Version 1.4. For the convenience of users, DCI also created an online HTML[6] version of DCI Specification, Version 1.4.1. Due to the HTML conversion process, the footnotes in the DCSS now appear as endnotes. The PDF version contains pagination and page numbers whereas the HTML version does not.
DCI Specification Version 1.4.2,[7][8] dated June 15, 2022, includes revisions and refinements respecting Object-Based Audio Essence (OBAE), also known as Immersive Audio Bitstream (IAB). Version 1.4.2 also implements post-show log record collection utilizing SMPTE 430-17 SMS-OMB Communications Protocol Specification. Additionally, Version 1.4.2 incorporated two prior addenda: the Digital Cinema Object-Based Audio Addendum, dated October 1, 2018 and the Stereoscopic Digital Cinema Addendum, Version 1.0, dated July 11, 2007. Users using Version 1.4.2 no longer need to refer to the separate addenda. Previous DCSS versions are archived on the DCI web site.
Based on many SMPTE and ISO standards, such as JPEG 2000-compressed image and "broadcast wave" PCM/WAV sound, the DCI Specification explains the route to create an entire Digital Cinema Package (DCP) from a raw collection of files known as the Digital Cinema Distribution Master (DCDM), as well as the specifics of its content protection, encryption, and forensic marking.
The DCI Specification also establishes standards for the decoder requirements and the presentation environment itself, such as ambient light levels, pixelaspect and shape, image luminance, white pointchromaticity, and those tolerances to be kept.
Even though it specifies what kind of information is required, the DCI Specification does not include specific information about how data within a distribution package is to be formatted. Formatting of this information is defined by the Society of Motion Picture and Television Engineers (SMPTE) digital cinema standards and related documents.[lower-alpha 3]
Image and audio capability overview
2D image
Comparison of 4K DCI resolutions and 16:9
2048×1080 (2K) at 24 frame/s or 48 frame/s, or 4096×2160 (4K) at 24 frame/s
In 2K, for Scope (2.39:1) presentation 2048×858 pixels of the imager is used
In 2K, for Flat (1.85:1) presentation 1998×1080 pixels of the imager is used
In 4K, for Scope (2.39:1) presentation 4096×1716 pixels of the imager is used
In 4K, for Flat (1.85:1) presentation 3996×2160 pixels of the imager is used
DCI has additionally published a document outlining recommended practice for High Frame Rate digital cinema.[9] This document discloses the following proposed frame rates: 60, 96, and 120 frames per second for 2D at 2K resolution; 48 and 60 for stereoscopic 3D at 2K resolution; 48 and 60 for 2D at 4K resolution. The maximum compressed bit rate for support of all proposed frame rates should be 500Mbit/s.
Related information
The idea for DCI was originally mooted in late 1999 by Tom McGrath, then COO of Paramount Pictures, who applied to the U.S. Department of Justice for anti-trust waivers to allow the joint cooperation of all seven major motion picture studios.[citation needed]
Universal Pictures made one of the first feature-length DCPs created to DCI specifications, using their film Serenity.[10] Although it was not distributed theatrically, it had one public screening on November 7, 2005, at the USC Entertainment Technology Center's Digital Cinema Laboratory in the Pacific Theatre, Hollywood. Inside Man was Universal's first DCP commercial release, and, in addition to 35mm film distribution, was delivered via hard drive to 20 theatres in the United States along with two trailers.
The Academy Film Archive houses the Digital Cinema Initiatives, LLC Collection, which includes film and digital elements from DCI's Standard Evaluation Material (StEM), a 12-minute production shot on 35mm and 65mm film, created for vendors and standards organizations to test and evaluate image compression and digital projection technologies.[11]
Notes
↑ Metro-Goldwyn-Mayer withdrew as a member of DCI in May 2005, prior to the release of the DCI Specification.
↑ As of 1 January 2023, the following sixty-two SMPTE engineering guidelines, recommended practices, registered disclosure documents and standards had been adopted and published: • EG 1008:2022 Digital Cinema – Overview for the SMPTE 428, 429, 430, 431, 432, and 433 Document Suites • ST 427:2009 Link Encryption for 1.5Gb/s Serial Digital Interface • ST 428-1:2019 Image Characteristics • ST 428-2:2006 Audio Characteristics • ST 428-3:2006 Audio Channel Mapping and Channel Labeling [withdrawn] • RP 428-4:2010 Audio File Formats and Delivery Constraints • RP 428-5:2010 Mapping of Images into Constrained Tag Image File • RP 428-6:2009 Digital Leader • ST 428-7:2014 Subtitle • ST 428-9:2008 Serial Digital Interface Signal Formatting • ST 428-10:2008 Closed Caption and Closed Subtitle • ST 428-11:2013 Additional Frame rates for D-Cinema • ST 428-12:2013 Common Audio Channels and Soundfield Groups • ST 428-19:2010 Additional Frame Rates Level AFR2 and Level AFR4 — Serial Digital Interface Signal Formatting • ST 428-21:2011 Archive Frame Rates for D-Cinema • ST 429-2:2020 DCP Operational Constraints • ST 429-3:2007 Sound and Picture Track File • ST 429-4:2020 MXF JPEG2000 Application • ST 429-5:2017 Timed Text Track File • ST 429-6:2006 MXF Track File Essence Encryption • ST 429-7:2006 Composition Playlist • ST 429-8:2007 Packing List • ST 429-9:2014 Asset Mapping and File Segmentation • ST 429-10:2008 Stereoscopic Picture Track File • ST 429-12:2008 Caption and Closed Subtitles • ST 429-13:2009 DCP Operational Constraints for Additional Frame Rates • ST 429-14:2014 Aux Data Track File • ST 429-16:2014 Additional Composition Metadata and Guidelines • ST 429-17:2017 XML Constraints • ST 429-18:2019 Immersive Audio Track File • ST 429-19:2019 DCP Operational Constraints for Immersive Audio • ST 430-1:2017 Key Delivery Message • ST 430-1:2017 Am1:2019 Key Delivery Message - Amendment 1 • ST 430-2:2017 Digital Certificate • ST 430-3:2012 Generic Extra-Theater Message Format • ST 430-4:2008 Log Record Specification • ST 430-4:2008 Am1:2011 Log Record Specification - Amendment 1 • ST 430-5:2011 Security Log Event Class and Constraints • ST 430-6:2010 Auditorium Security Messages for Intra-Theater Communications • ST 430-7:2008 Facility List Message [withdrawn] • ST 430-7:2008 Am1:2001 Facility List Message – Amendment 1 [withdrawn] • ST 430-9:2008 Key Delivery Bundle • ST 430-9:2008 Am1:2011 Key Delivery Bundle – Amendment 1 • ST 430-10:2010 Auxiliary Content Synchronisation Protocol • ST 430-11:2011 Auxiliary Resource Presentation List • ST 430-12:2014 FSK Synchronization Protocol • ST 430-12:2014 Am1:2019 FSK Synchronization Protocol – Amendment 1 • ST 430-14:2022 Digital Sync and Aux Data Transfer Protocol • ST 430-15:2017 Facility List Message Exchange Protocol • ST 430-16:2017 Extended Facility List Message • ST 430-17:2022 SMS-OMB Communications Protocol Specification • ST 431-1:2006 Screen Luminance Level, Chromaticity and Uniformity • RP 431-2:2011 Reference Projector and Environment • EG 432-1:2010 Color Processing for D-Cinema • EG 432-2:2006 D-Cinema Low Frequency Effects (LFE) Channel Audio Characteristics • ST 433:2008 XML Data Types • ST 433:2008 Am1:2011 XML Data Types – Amendment 1 • RDD 20:2010 Cinelink 2 Specification • RDD 28:2014 Dolby Atmos® Print Master File Specification • RDD 29:2019 Dolby Atmos® Bitstream Specification • RDD 52:2020 SMPTE DCP Bv2.1 Application Profile • RDD 57:2021 IAB Application Profile 1
Related Research Articles
Digital cinema refers to the adoption of digital technology within the film industry to distribute or project motion pictures as opposed to the historical use of reels of motion picture film, such as 35 mm film. Whereas film reels have to be shipped to movie theaters, a digital movie can be distributed to cinemas in a number of ways: over the Internet or dedicated satellite links, or by sending hard drives or optical discs such as Blu-ray discs.
SMPTE timecode is a set of cooperating standards to label individual frames of video or film with a timecode. The system is defined by the Society of Motion Picture and Television Engineers in the SMPTE 12M specification. SMPTE revised the standard in 2008, turning it into a two-part document: SMPTE 12M-1 and SMPTE 12M-2, including new explanations and clarifications.
Serial digital interface (SDI) is a family of digital video interfaces first standardized by SMPTE in 1989. For example, ITU-R BT.656 and SMPTE 259M define digital video interfaces used for broadcast-grade video. A related standard, known as high-definition serial digital interface (HD-SDI), is standardized in SMPTE 292M; this provides a nominal data rate of 1.485 Gbit/s.
HDCAM is a high-definition video digital recording videocassette version of Digital Betacam introduced in 1997 that uses an 8-bit discrete cosine transform (DCT) compressed 3:1:1 recording, in 1080i-compatible down-sampled resolution of 1440×1080, and adding 24p and 23.976 progressive segmented frame (PsF) modes to later models. The HDCAM codec uses rectangular pixels and as such the recorded 1440×1080 content is upsampled to 1920×1080 on playback. The recorded video bit rate is 144 Mbit/s. Audio is also similar, with four channels of AES3 20-bit, 48 kHz digital audio. Like Betacam, HDCAM tapes were produced in small and large cassette sizes; the small cassette uses the same form factor as the original Betamax. The main competitor to HDCAM was the DVCPRO HD format offered by Panasonic, which uses a similar compression scheme and bit rates ranging from 40 Mbit/s to 100 Mbit/s depending on frame rate.
1080p is a set of HDTV high-definition video modes characterized by 1,920 pixels displayed across the screen horizontally and 1,080 pixels down the screen vertically; the p stands for progressive scan, i.e. non-interlaced. The term usually assumes a widescreen aspect ratio of 16:9, implying a resolution of 2.1 megapixels. It is often marketed as Full HD or FHD, to contrast 1080p with 720p resolution screens. Although 1080p is sometimes referred to as 2K resolution, other sources differentiate between 1080p and (true) 2K resolution.
Digital cinematography is the process of capturing (recording) a motion picture using digital image sensors rather than through film stock. As digital technology has improved in recent years, this practice has become dominant. Since the mid-2010s, most movies across the world are captured as well as distributed digitally.
Uncompressed video is digital video that either has never been compressed or was generated by decompressing previously compressed digital video. It is commonly used by video cameras, video monitors, video recording devices, and in video processors that perform functions such as image resizing, image rotation, deinterlacing, and text and graphics overlay. It is conveyed over various types of baseband digital video interfaces, such as HDMI, DVI, DisplayPort and SDI. Standards also exist for the carriage of uncompressed video over computer networks.
CinemaDNG is the result of an Adobe-led initiative to define an industry-wide open file format for digital cinema files. CinemaDNG caters for sets of movie clips, each of which is a sequence of raw video images, accompanied by audio and metadata. CinemaDNG supports stereoscopic cameras and multiple audio channels. CinemaDNG specifies directory structures containing one or more video clips, and specifies requirements and constraints for the open format files,, within those directories, that contain the content of those clips.
4K resolution refers to a horizontal display resolution of approximately 4,000 pixels. Digital television and digital cinematography commonly use several different 4K resolutions. In television and consumer media, 3840 × 2160 with a 16:9 aspect ratio is the dominant 4K standard, whereas the movie projection industry uses 4096 × 2160.
A Digital Cinema Package (DCP) is a collection of digital files used to store and convey digital cinema (DC) audio, image, and data streams.
8K resolution refers to an image or display resolution with a width of approximately 8,000 pixels. 8K UHD is the highest resolution defined in the Rec. 2020 (UHDTV) standard.
2K resolution is a generic term for display devices or content having a horizontal resolution of approximately 2,000 pixels. In the movie projection industry, Digital Cinema Initiatives is the dominant standard for 2K output and defines a 2K format with a resolution of 2048 × 1080. For television and consumer media, the dominant resolution in the same class is 1920 × 1080, but in the cinema industry this is generally referred to as "HD" and distinguished from the various 2K cinema formats.
A display resolution standard is a commonly used width and height dimension of an electronic visual display device, measured in pixels. This information is used for electronic devices such as a computer monitor. Certain combinations of width and height are standardized and typically given a name and an initialism which is descriptive of its dimensions. A graphics display resolution can be used in tandem with the size of the graphics display to calculate pixel density. An increase in the pixel density often correlates with a decrease in the size of individual pixels on a display.
Doremi Laboratories, Inc., often shortened to Doremi Labs, was a developer and manufacturer of digital servers and format converters for the digital cinema, broadcast, post-production and professional A/V markets. It was established in 1985 in Burbank, California, United States, and was absorbed into Dolby Laboratories in a 2014 acquisition.
CineAsset is a complete mastering software suite by Doremi Labs that can create and playback encrypted and unencrypted DCI compliant packages from virtually any source. CineAsset includes a separate "Editor" application for generating Digital Cinema Packages (DCPs). CineAsset Pro adds the ability to generate encrypted DCPs and Key Delivery Messages (KDMs) for any encrypted content in the database.
CineExport is a plug-in for Apple Compressor used to convert Final Cut Pro sequences and popular media formats to DCI compliant Digital Cinema Packages (DCP) by Doremi Labs. Using the powerful CineAsset encoding engine, CineExport can be used to create JPEG2000 DCP's in the XYZ color space. MPEG-2 and H.264 encoded DCP's can also be created for alternative content and compatible players. Standard and Pro versions are available allowing creation of 2D and 3D DCP's at up to 4K resolution. The Pro version allows the generation of encrypted DCP's along with KDM generation for encrypted content. DCP's created by CineExport are compatible with any standard digital cinema server.
Ultra-high-definition television today includes 4K UHD and 8K UHD, which are two digital video formats with an aspect ratio of 16:9. These were first proposed by NHK Science & Technology Research Laboratories and later defined and approved by the International Telecommunication Union (ITU).
A Media Block or Integrated Media Block (IMB) is a component in a digital cinema projection system. Its purpose is to convert the Digital Cinema Package (DCP) content into data that ultimately produces picture and sound in a theater in compliance with DCI anti-piracy encryption requirements.
DCI-P3 is a color space first defined in 2005 as part of the Digital Cinema Initiative, to be used for digital theatrical motion picture distribution (DCDM). Display P3 is a variant developed by Apple Inc. for wide-gamut displays.
Interoperable Master Format (IMF) is a container format for the standardized digital delivery and storage of finished audio-visual masters, including movies, episodic content and advertisements.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
