Original camera negative

Last updated

The original camera negative (OCN) is the film in a traditional film-based movie camera which captures the original image. This is the film from which all other copies will be made. It is known as raw stock prior to exposure.

Contents

The size of a roll varies depending on the film gauge and whether or not a new roll, re-can, or short end was used. One hundred or 400 foot rolls are common in 16mm, while 400 or 1,000 foot (ft) rolls are used in 35mm work. While these are the most common sizes, other lengths such as 200, 800, or 1,200 ft may be commercially available from film stock manufacturers, usually by special order. Rolls of 100 and 200 ft are generally wound on spools for daylight-loading, while longer lengths are only wound around a plastic core. Core-wound stock has no exposure protection outside its packaging, and therefore must be loaded into a camera magazine within a darkroom or changing bag/tent in order to prevent the film being fogged.

Value

Original camera negative is of great value, as if lost or damaged it cannot be re-created without re-shooting the scene, something which is often impossible. It also contains the highest-quality version of the original image available, before any analog resolution and dynamic range loss from copying. For these reasons, original camera negative is handled with great care, and only by specialized trained people in dedicated film laboratories.

Procedures in the laboratory

Jamil Albina with a film dryer drying original camera negatives at the American Colony in Jerusalem, 1930s. Jamil Albina with a film dryer at the American Colony LOC matpc.11634.jpg
Jamil Albina with a film dryer drying original camera negatives at the American Colony in Jerusalem, 1930s.

After the film is processed by the film lab, camera rolls are assembled into lab rolls of 1,200 to 1,500 ft. Work prints may be made for viewing dailies or editing the picture on film.

Once film editing is finalized, a negative cutter will conform the negative using the Keykode on the edge of the film as a reference, cutting the original camera negative and incorporating any opticals (titles, dissolves, fades, and special effects), and cementing it together into several rolls.

The edited original negative is then copied to create a safety positive which can be used as a backup to create a usable negative. At this point, an answer print will be created from the original camera negative, and upon its approval, interpositives (IPs) and internegatives (INs) are created, from which the release prints are made. Generally speaking, the original camera negative is considered too important and delicate to be used for any processes more than necessary, as each pass through a lab process carries the risk of further degrading the quality of the negative by scratching the emulsion. Once an answer print is approved, the interpositives and internegatives are regarded as the earliest generation of the finished and graded film, and are almost always used for transfers to video or new film restorations. The original camera negatives is usually regarded as a last resort in the event that all of the intermediate elements have been compromised or lost.

The more popular a film is, the higher the likelihood that the original negative is in a worse shape, due to the need to return to the original camera negative to strike new interpositives to replace the exhausted ones, and thus create more internegatives and release prints. Before 1969, 35mm prints were struck directly from the original negative, often running into hundreds of copies, and causing further wear on the original.[ citation needed ]

Digital cameras

Physical film stock is still occasionally used in film-making, particularly in prestige productions where the director and cinematographer have the power to require the extra cost, but as of 2016, it is becoming increasingly rare. [1]

In modern cinematography, the camera is usually a digital camera, and no physical negative exists. However, the concept of "camera original material" is still used to describe camera image data. Camera original material that has not yet been ingested, duplicated, and archived is in a similar precarious state to original camera negative in a film process. One of the jobs of the digital imaging technician is to ensure that digital camera original material is backed up as soon as possible.

Related Research Articles

Film stock Medium used for recording motion pictures

Film stock is an analog medium that is used for recording motion pictures or animation. It is recorded on by a movie camera, developed, edited, and projected onto a screen using a movie projector. It is a strip or sheet of transparent plastic film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast and resolution of the film. The emulsion will gradually darken if left exposed to light, but the process is too slow and incomplete to be of any practical use. Instead, a very short exposure to the image formed by a camera lens is used to produce only a very slight chemical change, proportional to the amount of light absorbed by each crystal. This creates an invisible latent image in the emulsion, which can be chemically developed into a visible photograph. In addition to visible light, all films are sensitive to X-rays and high-energy particles. Most are at least slightly sensitive to invisible ultraviolet (UV) light. Some special-purpose films are sensitive into the infrared (IR) region of the spectrum.

35 mm movie film Motion picture film gauge, the standard

35 mm film is a film gauge used in filmmaking, and the film standard. In motion pictures that record on film, 35 mm is the most commonly used gauge. The name of the gauge is not a direct measurement, and refers to the nominal width of the 35 mm format photographic film, which consists of strips 1.377 ± 0.001 inches (34.976 ± 0.025 mm) wide. The standard image exposure length on 35 mm for movies is four perforations per frame along both edges, which results in 16 frames per foot of film.

135 film Photographic film format

135 film, more popularly referred to as 35 mm film or 35 mm, is a format of photographic film used for still photography. It is a film with a film gauge of 35 mm (1.4 in) loaded into a standardized type of magazine – also referred to as a cassette or cartridge – for use in 135 film cameras. The engineering standard for this film is controlled by ISO 1007 titled '135-size film and magazine'.

Kodachrome Brand name of an Eastman Kodak film

Kodachrome is the brand name for a color reversal film introduced by Eastman Kodak in 1935. It was one of the first successful color materials and was used for both cinematography and still photography. For many years Kodachrome was widely used for professional color photography, especially for images intended for publication in print media. Because of its complex processing requirements, the film was sold process-paid in the United States until 1954, when a legal ruling prohibited that. However, the arrangement continued in other markets.

Digital intermediate is a motion picture finishing process which classically involves digitizing a motion picture and manipulating the color and other image characteristics.

Reversal film Type of photographic film that produces a positive image on a transparent base

In photography, reversal film or slide film is a type of photographic film that produces a positive image on a transparent base. Instead of negatives and prints, reversal film is processed to produce transparencies or diapositives. Reversal film is produced in various sizes, from 35 mm to roll film to 8×10 inch sheet film.

Negative (photography) Image on photographic film

In photography, a negative is an image, usually on a strip or sheet of transparent plastic film, in which the lightest areas of the photographed subject appear darkest and the darkest areas appear lightest. This reversed order occurs because the extremely light-sensitive chemicals a camera film must use to capture an image quickly enough for ordinary picture-taking are darkened, rather than bleached, by exposure to light and subsequent photographic processing.

Contact print

A contact print is a photographic image produced from film; sometimes from a film negative, and sometimes from a film positive or paper negative. In a darkroom an exposed and developed piece of film or photographic paper is placed emulsion side down, in contact with a piece of photographic paper, light is briefly shone through the negative or paper and then the paper is developed to reveal the final print.

Compositing Combining of visual elements from separate sources into single images

Compositing is the process or technique of combining visual elements from separate sources into single images, often to create the illusion that all those elements are parts of the same scene. Live-action shooting for compositing is variously called "chroma key", "blue screen", "green screen" and other names. Today, most, though not all, compositing is achieved through digital image manipulation. Pre-digital compositing techniques, however, go back as far as the trick films of Georges Méliès in the late 19th century, and some are still in use.

Bleach bypass

Bleach bypass, also known as skip bleach or silver retention, is a chemical effect which entails either the partial or complete skipping of the bleaching function during the processing of a color film. By doing this, the silver is retained in the emulsion along with the color dyes. The result is a black-and-white image over a color image. The images usually have reduced saturation and exposure latitude, along with increased contrast and graininess. It usually is used to maximum effect in conjunction with a one-stop underexposure.

Techniscope Motion picture camera film format

Techniscope or 2-perf is a 35 mm motion picture camera film format introduced by Technicolor Italia in 1960. The Techniscope format uses a two film-perforation negative pulldown per frame, instead of the standard four-perforation frame usually exposed in 35 mm film photography. Techniscope's 2.33:1 aspect ratio is easily cropped to the 2.39:1 widescreen ratio, because it uses half the amount of 35 mm film stock and standard spherical lenses. Thus, Techniscope release prints are made by anamorphosizing and enlarging each frame by a factor of two.

Negative cutting is the process of cutting motion picture negative to match precisely the final edit as specified by the film editor. Original camera negative (OCN) is cut with scissors and joined using a film splicer and film cement. Negative cutting is part of the post-production process and occurs after editing and prior to striking internegatives and release prints. The process of negative cutting has changed little since the beginning of cinema in the early 20th century. In the early 1980s computer software was first used to aid the cutting process. Kodak introduced barcode on motion picture negative in the mid-1990s. This enabled negative cutters to more easily track shots and identify film sections based on keykode.

Microform Forms with microreproductions of documents

Microforms are scaled-down reproductions of documents, typically either films or paper, made for the purposes of transmission, storage, reading, and printing. Microform images are commonly reduced to about 4% or one twenty-fifth of the original document size. For special purposes, greater optical reductions may be used.

Film perforations

Film perforations, also known as perfs and sprocket holes, are the holes placed in the film stock during manufacturing and used for transporting and steadying the film. Films may have different types of perforations depending on film gauge, film format, and intended usage. Perforations are also used as a standard measuring reference within certain camera systems to refer to the size of the frame.

An interpositive, intermediate positive, IP or master positive is an orange-based motion picture film with a positive image made from the edited camera negative. The orange base provides special color characteristics that allow more accurate color reproduction than if the IP had a clear base like an exhibition positive.

An internegative is a motion picture film duplicate. It is the color counterpart to an interpositive, in which a low-contrast color image is used as the positive between an original camera negative and a duplicate negative.

Color motion picture film Photographic film type

Color motion picture film refers both to unexposed color photographic film in a format suitable for use in a motion picture camera, and to finished motion picture film, ready for use in a projector, which bears images in color.

A release print is a copy of a film that is provided to a movie theater for exhibition.

Photographic film Film used by film (analog) cameras

Photographic film is a strip or sheet of transparent film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast, and resolution of the film.

Technicolor Color motion picture process

Technicolor is a series of color motion picture processes, the first version dating back to 1916, and followed by improved versions over several decades.

References

  1. Hart, Hugh (Summer 2015). "Christopher Nolan fights to keep film alive". www.dga.org. Directors Guild of America. Retrieved 2016-11-20.