Selectable Lightweight Attack Munition

Last updated
Selectable Lightweight Attack Munition during training Regimental Engineer Squadron, 2nd Cavalry Regiment conducts hands on training with Selectable Lightweight Attack Munition (SLAM) 160824-A-SY419-008.jpg
Selectable Lightweight Attack Munition during training

Selectable Lightweight Attack Munition or (M2/M3/M4 SLAM) is a small United States multi-purpose landmine produced by ATK Precision Fuze Company in Janesville, Wisconsin from 1992 to 2002. [1] It has a passive infrared sensor, and a magnetic influence sensor which allow it to be used as a demolition munition, off-route mine, or full width belly attack mine.

Contents

Overview

The SLAM is compact and weighs only 1 kilogram, so it is easily man-portable. The SLAM is intended for use against APCs, parked aircraft, wheeled or tracked vehicles, stationary targets (such as electrical transformers), small fuel-storage tanks (less than 38,000 litres (10,000 US gal)), and ammunition storage facilities. When the mine is triggered, the Misnay-Schardin effect generates a copper explosively formed penetrator (EFP), which can penetrate 40 millimeters of armor at a range of eight meters.

The SLAM has an anti-tamper feature that is only active in the bottom- and side-attack modes. The SLAM will detonate when an attempt is made to change the selector switch's position after arming.

The SLAM is produced in three versions:

The M4 is normally used by units designated as light, airborne, air assault, crisis response, and rapid deployment.

Modes of operation

The SLAM has four possible modes of detonation—bottom attack, side attack, timed demolition, and command detonation.

Bottom attack

The SLAM has a built-in magnetic influence sensor, that allows it to be used as a full width belly attack munition against vehicles. It can be concealed along trails and roads where target vehicles operate and can be camouflaged with dry leaves, grass, and so forth without affecting EFP performance. Mud, gravel, water, and other debris that fill the EFP cup have minimal impact on EFP formation and effectiveness as long as the debris does not extend beyond the depth of the EFP cup. The magnetic sensor is designed to trigger detonation when it senses a vehicle passing overhead. For the EFP to form properly, it needs a minimum of 13 centimeters (5 in) from the point of emplacement to the target. The bottom-attack mode is active when the selector switch is set to 4, 10, or 24 hours and the passive infrared sensor (PIRS) trigger cover is in place.

Side attack

The SLAM is equipped with a passive infrared sensor (PIRS) that was specifically developed for the side-attack mode. The PIRS detects trucks and light armored vehicles by sensing the change in background temperature when a vehicle crosses in front of the PIRS port. The PIRS is directional and aligned with the EFP when the device is aimed. The side-attack mode is active when the SLAM selector switch is set to 4, 10, or 24 hours—and the PIRS cover is removed to expose the PIRS.

Timed demolition

The SLAM's built-in timer will trigger detonation at the end of a selected time. The timed-demolition mode is active when the SLAM selector switch is set to 15, 30, 45, or 60 minutes. In this mode, the magnetic sensor and the PIRS are inoperable, and the SLAM will detonate after the selected time has expired.

Command detonation

This mode provides manual warhead initiation using standard military blasting caps and a priming adapter. The command-detonation capability bypasses the SLAM's fuse and safing and arming (S&A) assembly.

Specifications

Appearances in media

The SLAM can be found in Half-Life 2: Deathmatch . It was omitted from Half-Life 2 , but was later added back into Deathmatch. This weapon has made an appearance in Garry's Mod , a sandbox modification for Half-Life 2. [2] The SLAM can also be used in Battlefield 4 .

Related Research Articles

The GATOR mine system is a United States military system of air-dropped anti-tank and anti-personnel mines developed in the 1980s to be compatible with existing cluster dispensers. It is used with two dispenser systems—the Navy 230 kg (500 lb) CBU-78/B and the Air Force 450 kg (1,000 lb) CBU-89/B. Additionally the mines are used with the land- and helicopter-based Volcano mine system.

<span class="mw-page-title-main">Anti-tank mine</span> Type of land mine designed to destroy tanks

In anti-tank warfare, an anti-tank mine is a type of land mine designed to damage or destroy vehicles including tanks and armored fighting vehicles.

Motion detection is the process of detecting a change in the position of an object relative to its surroundings or a change in the surroundings relative to an object. It can be achieved by either mechanical or electronic methods. When it is done by natural organisms, it is called motion perception.

<span class="mw-page-title-main">Minesweeping</span> Practice of removing explosive naval mines

Minesweeping is the practice of removing explosive naval mines, usually by a specially designed ship called a minesweeper using various measures to either capture or detonate the mines, but sometimes also with an aircraft made for that purpose. Minesweeping has been practiced since the advent of naval mining in 1855 during the Crimean War. The first minesweepers date to that war and consisted of British rowboats trailing grapnels to snag the mines.

<span class="mw-page-title-main">CBU-97 Sensor Fuzed Weapon</span> Anti-vehicle "smart" cluster bomb

The CBU-97 Sensor Fuzed Weapon is a United States Air Force 1,000-pound (450 kg)-class freefall Cluster Bomb Unit. It was developed and produced by Textron Defense Systems. A CBU-97 used in conjunction with the Wind Corrected Munitions Dispenser guidance tail kit is converted to a precision-guided weapon, and the combination is designated CBU-105.

<span class="mw-page-title-main">Passive infrared sensor</span> Electronic sensor that measures infrared light

A passive infrared sensor is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors. PIR sensors are commonly used in security alarms and automatic lighting applications.

<span class="mw-page-title-main">Motion detector</span> Electrical device which utilizes a sensor to detect nearby motion

A motion detector is an electrical device that utilizes a sensor to detect nearby motion. Such a device is often integrated as a component of a system that automatically performs a task or alerts a user of motion in an area. They form a vital component of security, automated lighting control, home control, energy efficiency, and other useful systems.

<span class="mw-page-title-main">FGM-172 SRAW</span> American/Israeli anti-tank missile system

The FGM-172 SRAW, also known as the Predator SRAW, was a lightweight, close range missile system produced by Lockheed Martin, developed by Lockheed Martin and Israel Military Industries. It is designed to complement the FGM-148 Javelin anti-tank missile. The Predator had a longer range and was more powerful than the AT4 that it was designed to replace, but had a shorter range than the Javelin.

<span class="mw-page-title-main">Explosively formed penetrator</span> Shaped charge designed to penetrate armor effectively

An explosively formed penetrator (EFP), also known as an explosively formed projectile, a self-forging warhead, or a self-forging fragment, is a special type of shaped charge designed to penetrate armor effectively, from a much greater standoff range than standard shaped charges, which are more limited by standoff distance. As the name suggests, the effect of the explosive charge is to deform a metal plate into a slug or rod shape and accelerate it toward a target. They were first developed as oil well perforators by American oil companies in the 1930s, and were deployed as weapons in World War II.

<span class="mw-page-title-main">TM-83 mine</span>

The TM-83 is a Soviet off-route anti-tank mine with a shaped charge, developed in 1983, and first shown publicly in 1993. The mine utilises the Misznay Schardin effect to create an armour-penetrating projectile, and is activated using its infrared and seismic sensors.

<span class="mw-page-title-main">Anti-handling device</span> Component of a munition

An anti-handling device is an attachment to or an integral part of a landmine or other munition such as some fuze types found in general-purpose air-dropped bombs, cluster bombs and sea mines. It is designed to prevent tampering or disabling, or to target bomb disposal personnel. When the protected device is disturbed, it detonates, killing or injuring anyone within the blast area. There is a strong functional overlap of booby traps and anti-handling devices.

<span class="mw-page-title-main">FFV 028 mine</span> Series of Swedish anti-tank mines

The FFV 028 is a series of steel cased Swedish anti-tank mines that use electronic fuzes. The mines are circular, with a large Misznay Schardin effect warhead in the center of the mine, with the fuzing and sensor electronics located in the dead space above the main charge. The design of the mine dates from the 1970s and uses a magnetic influence sensor to detonate the mine, making it able to attack the full width of armoured vehicles.

The Korean Smart Top-Attack Munition (KSTAM) is a smart munition intended to be launched from the gun of a main battle tank, namely the South Korean K2 Black Panther. Comparable systems include Diehl Corporation's Spear, DRDO SAMHO, CMI Defence and Luch Falarick 120, Israeli Aerospace Industries LAHAT, Nexter Systems Polynege, Alliant Techsystems STAFF and MRM-KE, Raytheon Technologies MRM-CE, and the two final companies' TERM.

<span class="mw-page-title-main">Proximity sensor</span> About proximity sensor

A proximity sensor is a sensor able to detect the presence of nearby objects without any physical contact.

Geophysical MASINT is a branch of Measurement and Signature Intelligence (MASINT) that involves phenomena transmitted through the earth and manmade structures including emitted or reflected sounds, pressure waves, vibrations, and magnetic field or ionosphere disturbances.

In military munitions, a fuze is the part of the device that initiates function. In some applications, such as torpedoes, a fuze may be identified by function as the exploder. The relative complexity of even the earliest fuze designs can be seen in cutaway diagrams.

<span class="mw-page-title-main">MW-1</span> German submunition delivery system

The MW-1 is a German munitions dispenser similar to the British JP233. It is designed to be carried on the Tornado IDS, although it can be carried on the Lockheed F-104 Starfighter and the McDonnell Douglas F-4 Phantom II. The MW-1 started to be phased out after the German Government ratified the Convention on Cluster Munitions in 2009.

A magnetic proximity fuse was patented by P.J. Eliomarkakis, although similar devices had been in service for nearly a decade. It is a type of proximity fuze that initiates a detonator in a piece of ordnance such as a land mine, naval mine, depth charge, or shell when the fuse's magnetic equilibrium is upset by a magnetic object such as a tank or a submarine.

The SMArt 155 is a German 155 mm artillery round designed for a long-range, indirect fire top-attack role against armoured vehicles. The projectile was developed in 1989 by Diehl BGT Defence in Überlingen, Germany, with Rheinmetall and started full-rate production for the German Army in 1998. It consists of a 47-kilogram (104 lb) heavy artillery projectile containing two autonomous, sensor-fused, "fire-and-forget" submunitions. Due to the submunitions, it has been considered by some to be a cluster munition. As of 2008, representatives of the German defense ministry have referred to it as not being classified as submunition weapons, which were prohibited by the 2008 Convention on Cluster Munitions.

The Rhino Passive Infrared Defeat System was an early detonation Counter-IED system. It was mounted to the front of a vehicle and used heat to prematurely detonate any hidden improvised explosive devices (IEDs) while the vehicle was at a safe distance away from the blast. It was developed by the Joint Improvised-Threat Defeat Organization (JIEDDO) in 2006 during the war in Iraq to counter the rise of IED-related deaths.

References

  1. "ATK Awarded $4.5 Million Contract to Produce Special Operations Munitions". ATK. 2 November 2000. Archived from the original on 14 July 2011.
  2. Steam