.310 Cadet

Last updated
.310 Cadet
310Cadet 22WMR 22LR.jpg
TypeRifle
Place of origin United Kingdom
Production history
Designer W.W. Greener
Designed1900
ManufacturerWestley Richards and others
Specifications
Case typeRimmed, Straight
Bullet diameter.323 in (8.2 mm)
Neck diameter.327 in (8.3 mm)
Base diameter.355 in (9.0 mm)
Rim diameter.410 in (10.4 mm)
Rim thickness.043 in (1.1 mm)
Case length1.12 in (28 mm)
Overall length1.6 in (41 mm)
Rifling twist20"
Primer typeSmall rifle
Ballistic performance
Bullet mass/typeVelocityEnergy
110 gr (7 g) SP1,500 ft/s (460 m/s)550 ft⋅lbf (750 J)
120 gr (8 g) SP1,530 ft/s (470 m/s)624 ft⋅lbf (846 J)
Source(s): "Cartridges of the World" [1]

The .310 Cadet, also known as the .310 Greener, or the .310 Martini, is a centerfire rifle cartridge, introduced in 1900 by W.W. Greener as a target round for the Martini Cadet rifle. [2] Firing a 120 grain heeled lead projectile at 1350 ft/s the round is similar in performance to the .32-20 Winchester and some rifles may chamber both rounds with some accuracy. [3] The full metal jacketed round was used in cadet rifles in Australia and New Zealand after early 20th-century Defence Acts. In New Zealand, after the start of the Boer War, a cadet corps had been started; by 1901 it was recommended that membership be compulsory. 500 Westley-Richards miniature Martini–Henry rifles were available by October 1902 (Auckland Star), and 5000 by April 1903 (Star). Such rifles gained popularity in Australia, New Zealand and the United States when thousands of Martini Cadet rifles were sold by the Australian government after World War II.[ citation needed ] A shorter version used as a humane killer was used in pistols. Known as the .310 cattle killer, invented by WW Greener, it was shorter in that a .310 cadet could not be accidentally chambered into the humane killer pistol.

Contents

Current Use

After being sold by the Australian government many were converted to sporting or target rifles, often re-barreled to calibers like .22 Hornet, .218 Bee, .25-20 Winchester, .222 Rimmed, .357 Magnum and others to .22 rimfire by gun makers like Sportco. [4]

Those still using the .310 Cadet have to either buy cases to reload, by Bertram Bullet Co. in Victoria, Australia, or several small independent ammunition makers in Australia and the United Kingdom. However these new .310 Cadet cases are 3-4 times as expensive as new .32-20 Winchester cases, hence shooters modify .32-20 cases, as a cheaper alternative. Modifications involve length resizing, and in most cases reducing the rim thickness. Due to the .310 using a heeled projectile, the neck thickness of the .32-20 does not have to be reamed down, after first being case length resized to 1.075" (27.3 mm). Most .310 cadet chambered rifles need to have the rim of the .32-20 case reduced from 0.065" to 0.045" (1.7 mm to 1.14 mm), to allow proper head spacing and operation of rifle. However, in the unusual instance of a lever action .32-20 fitted with a .310 barrel, the rifle will cycle better without the case rim thickness being reduced. As home reloading is the main option for the .310, many shooters play with different case length reduction of the .32-20, anywhere from 0.875'' to 1.185'' (22.23 mm to 30.10 mm).[ citation needed ]

Dimensions

310 Cadet dimensions CB-Ctg Art.jpg

See also

Related Research Articles

Handloading, or reloading, is the practice of making firearm cartridges by assembling the individual components, rather than purchasing mass-assembled, factory-loaded ammunition.

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

<span class="mw-page-title-main">Cartridge (firearms)</span> Ammunition consisting of a casing, projectile, propellant, and primer

A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.

<span class="mw-page-title-main">Caliber</span> Internal diameter of the barrel of a gun

In guns, particularly firearms, but not artillery, where a different definition may apply, caliber is the specified nominal internal diameter of the gun barrel bore – regardless of how or where the bore is measured and whether the finished bore matches that specification. It is measured in inches or in millimeters. In the United States it is expressed in hundredths of an inch; in the United Kingdom in thousandths; and elsewhere in millimeters. For example, a US "45 caliber" firearm has a barrel diameter of roughly 0.45 inches (11 mm). Barrel diameters can also be expressed using metric dimensions. For example, a "9 mm pistol" has a barrel diameter of about 9 millimeters. Since metric and US customary units do not convert evenly at this scale, metric conversions of caliber measured in decimal inches are typically approximations of the precise specifications in non-metric units, and vice versa.

<span class="mw-page-title-main">Rimfire ammunition</span> Type of ammunition common in low-caliber firearms

Rimfire ammunition is a type of firearm metallic cartridge whose primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845, by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the mid-19th century onwards, such as pinfire, only small caliber rimfire and centerfire cartridges have survived to the present day with regular usage. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition in the world today in terms of units sold.

<span class="mw-page-title-main">Lever action</span> Type of firearm action

A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 19 years, before being replaced by the .38 Long Colt in 1892.

<span class="mw-page-title-main">.303 British</span> British military rifle cartridge

The .303 British or 7.7×56mmR, is a .303-inch (7.7 mm) calibre rimmed rifle cartridge. The .303 inch bore diameter is measured between rifling lands as is the common practice in Europe which follows the traditional black powder convention.

<span class="mw-page-title-main">.32-20 Winchester</span> American rimmed rifle/pistol cartridge

The .32-20 Winchester, also known as .32 WCF , was the first small-game lever-action cartridge that Winchester produced. It was initially introduced as a black-powder cartridge in 1882 for small-game, varmint hunting, and deer. Colt produced a single-action revolver chambered for this cartridge a few years later.

<span class="mw-page-title-main">Wildcat cartridge</span> Custom cartridge for firearms

A wildcat cartridge, often shortened to wildcat, is a custom cartridge for which ammunition and/or firearms are not mass-produced. These cartridges are often created in order to optimize a certain performance characteristic of an existing commercial cartridge, or may merely be intended as novelty items.

A rim is an external flange that is machined, cast, molded, stamped, or pressed around the bottom of a firearms cartridge. Thus, rimmed cartridges are sometimes called "flanged" cartridges. Almost all cartridges feature an extractor or headspacing rim, in spite of the fact that some cartridges are known as "rimless cartridges". The rim may serve a number of purposes, including providing a lip for the extractor to engage, and sometimes serving to headspace the cartridge.

The 7.62×45mm is a rimless bottlenecked intermediate rifle cartridge developed in Czechoslovakia. It is fired by the Czech Vz. 52 rifle, Vz. 52 light machine gun, and ZB-53 machine gun. The cartridge was later dropped from use when the Czech converted to the standard 7.62×39mm Warsaw Pact cartridge of the Soviet Union. Its muzzle velocity and muzzle energy are slightly higher than that of the 7.62×39mm cartridge, and is on par with the .30-30 Winchester cartridge, with equivalent projectiles.

<span class="mw-page-title-main">.17 Hornet</span> Rifle cartridge

The .17 Hornet is a .17 caliber centerfire rifle cartridge originally offered as a "wildcat cartridge" developed by P.O. Ackley in the early 1950s. He created this non-factory (wildcat) offering by simply necking-down the .22 Hornet to .17 caliber and fire-forming the resized cases in his new chamber design. The result was a small quiet cartridge capable of high velocity. Ackley mentions it as one of the most balanced of the .17 cartridges of his time; likely, this is still true.

.32 caliber is a size of ammunition, fitted to firearms with a bore diameter of 0.32 inches (8.1 mm).

.22 caliber, or 5.6 mm caliber, refers to a common firearms bore diameter of 0.22 inch (5.6 mm).

The Martini Cadet is a centrefire single-shot cadet rifle produced in the United Kingdom by BSA and W.W. Greener for the use of Australian military Cadets. Although considered a miniature version of the Martini–Henry, the internal mechanism was redesigned by Auguste Francotte to permit removal from the receiver as a single unit. Chambered for the .310 Cadet cartridge, it was used from 1891 to 1955. They were also sold to the public thereafter, as the BSA No.4, 4a, 4b and 5 in other calibres like the .297/230 and .22 rimfire. The rifles will often chamber the similarly sized .32-20 Winchester and fire with some accuracy. However the 32/20 is actually 0.312 cal and the 310 is 0.323 cal. Due to this 10 thousandths difference the accuracy of a .32/20 round cannot be guaranteed.

<span class="mw-page-title-main">.17 Ackley Bee</span> Rifle cartridge

The .17 Ackley Bee is a wildcat centerfire rifle cartridge named after its designer, P.O. Ackley, and is a .218 Bee case necked down to .17 caliber with a squarer shoulder and less body taper. Being a rimmed case it was popular with single shot rifles such as the Martini Cadet and Low Wall Winchester. The caliber is well suited to varmint hunting particularly where minimal pelt damage is required.

The .300 Sherwood, also known as the .300 Extra Long and the .300 Westley, is an obsolete centerfire rifle cartridge developed by Westley Richards.

<span class="mw-page-title-main">.297/230 Morris</span> Pistol and rifle cartridges

The .297/230 Morris Short and .297/230 Morris Long are two obsolete centerfire firearm cartridges developed as sub-caliber training rounds for the British Martini–Henry rifle.

<span class="mw-page-title-main">Cadet rifle</span> Rifle used by military cadets and others for basic firearms and marksmanship training

A cadet rifle is a rifle used by military cadets and others for basic firearms and marksmanship training. Generally .22 caliber and bolt-action, they also come in semi-automatic versions. They are often miniature .22 caliber versions of standard issue service rifles.

References

  1. Barnes, Frank C. (1997) [1965]. McPherson, M.L. (ed.). Cartridges of the World (8th ed.). DBI Books. pp. 64, 91. ISBN   0-87349-178-5.
  2. Barnes, Frank C., Cartridges of the World, 7th Edition, p305
  3. Donnelly, John J., Handloaders Manual of Cartridge Conversions, p360
  4. "MINIATURE CALIBRE RIFLES RESEARCH SITE". THE U.K. HISTORIC ARMS RESOURCE CENTRE. Archived from the original on June 14, 2016. Retrieved August 26, 2016.