.500 Wyoming Express

Last updated
.500 Wyoming Express
TypeRevolver
Place of originUnited States
Production history
Designer Freedom Arms
Designed2005
ManufacturerFreedom Arms
Produced2005–present
Specifications
Case typeBelted straight
Bullet diameter.500 in (12.7 mm)
Base diameter.525 in (13.3 mm)
Rim diameter.543 in (13.8 mm)
Case length1.37 in (35 mm)
Overall length1.765 in (44.8 mm)
Rifling twist1:20
Primer typeLarge rifle
Maximum pressure50,000 psi
Ballistic performance
Bullet mass/typeVelocityEnergy
325 gr (21 g) X-Treme1,250 ft/s (380 m/s)1,127 ft⋅lbf (1,528 J)
410 gr (27 g) Bengal WFNGC1,500 ft/s (460 m/s)2,048 ft⋅lbf (2,777 J)
520 gr (34 g) Bengal WFNGC1,200 ft/s (370 m/s)1,663 ft⋅lbf (2,255 J)
Test barrel length: 7.5
Source(s): https://tiiarmory.com/ammunition

The .500 Wyoming Express or .500 WE is a "big bore" handgun cartridge. Freedom Arms introduced the cartridge in 2005 for their Model 83 .500 WE revolver. [1]

Contents

Like most handgun cartridges of this size, it is used almost exclusively in revolvers. It is designed mainly for hunting and wilderness defense against medium to heavy North American game.

Overview

The .500 Wyoming Express is dimensionally similar to the .50 Action Express but can be loaded to a higher power level and utilize heavier bullets, due to its greater maximum chamber pressure and longer cartridge overall length. [2] Unique among handgun cartridges, it is a belted round, which allows for a heavy roll crimp to be employed without compromising headspace, as with the .50 AE. Though not as powerful as the .500 S&W Magnum, the .500 Wyoming Express is available in more compact revolvers, and for those capable of mastering its heavy recoil, it is adequate for harvesting any North American game animal at short to moderate range. [3] Conceptually similar cartridges include the .500 Linebaugh, .500 JRH, .475 Linebaugh, and .454 Casull. However, the .500 Wyoming Express is somewhat more powerful than these rounds. It is ballistically comparable to the .500 Maximum, 50-70 Government, and .50 Beowulf cartridges, which are usually chambered in substantially larger firearms.

While .500 Wyoming Express brass was out of production for several years, it can be formed from .50 AE through a multi-step swaging process. Brass formed in this manner is currently available from TII Armory, as well as loaded ammunition. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Desert Eagle</span> Semi-automatic pistol

The Desert Eagle is a gas-operated, semi-automatic pistol known for chambering the .50 Action Express, the largest centerfire cartridge of any magazine-fed, self-loading pistol.

<span class="mw-page-title-main">.50 Action Express</span> Pistol cartridge designed by Evan Whildin

The .50 Action Express (AE) (12.7×33mmRB) is a large-caliber handgun cartridge, best known for its usage in the Desert Eagle. Developed in 1988 by American Evan Whildin of Action Arms, the .50 AE is one of the most powerful pistol cartridges in production.

<span class="mw-page-title-main">.454 Casull</span> High power firearm cartridge

The .454 Casull is a firearm cartridge, developed as a wildcat cartridge in 1958 by Dick Casull, Duane Marsh and Jack Fullmer. It was announced in November 1959 by Guns & Ammo magazine. The design is a lengthened and structurally improved .45 Colt case. The wildcat cartridge went mainstream when Freedom Arms brought a single action five-shot revolver chambered in .454 Casull to the retail firearms market in 1983. Ruger followed in 1997, chambering its Super Redhawk in this caliber. Taurus followed with the Raging Bull model in 1998 and the Taurus Raging Judge Magnum in 2010. The .45 Schofield and .45 Colt cartridges can fit into the .454's chambers, but not the other way around because of the lengthened case.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 14 years, before being replaced by the .38 Long Colt in 1892.

<span class="mw-page-title-main">.44 Magnum</span> Revolver cartridge designed by Elmer Keith and Smith & Wesson (S&W)

The .44 Remington Magnum, also known as .44 Magnum or 10.9x33mmR, is a rimmed, large-bore cartridge originally designed for revolvers and quickly adopted for carbines and rifles. Despite the ".44" designation, guns chambered for the .44 Magnum round, its parent case, the .44 Special, and its parent case, the .44 Russian all use 0.429 in (10.9 mm) diameter bullets. The .44 Magnum is based on the .44 Special case but lengthened and loaded to higher pressures for greater velocity and energy.

The .357 Maximum, formally known as the .357 Remington Maximum or the .357 Max, is a super magnum handgun cartridge originally developed by Elgin Gates as the wildcat .357 SuperMag. The .357 Maximum was introduced into commercial production as a joint-venture by Remington Arms Company and Ruger in 1983 as a new chambering for the Ruger Blackhawk. Shortly thereafter, Dan Wesson Firearms and Thompson/Center Arms introduced firearms in this cartridge. United Sporting Arms chambered it in their Silhouette series single-action revolvers. It is a .357 Magnum case lengthened 0.300 inches (7.6 mm). Based on the .357 Magnum cartridge, a revolver or single-shot pistol designed for the .357 Remington Maximum will chamber and fire the .360 Dan Wesson, .357 Magnum, .38 Special, .38 Long Colt, and .38 Short Colt cartridges. Intended primarily as a silhouette cartridge, such high velocity and energy levels have hunting applications. SAAMI pressure level for this cartridge is set at 40,000 pounds per square inch (280 MPa).

<span class="mw-page-title-main">.410 bore</span> Shotgun bore designed by Charles Eley and William Eley

The .410 bore is one of the smallest caliber of shotgun shell commonly available. A .410 bore shotgun loaded with shot shells is well suited for small game hunting and pest control. The .410 started off in the United Kingdom as a garden gun along with the .360 and the No. 3 bore rimfire, No. 2 bore rimfire, and No. 1 bore rimfire. .410 shells have similar base dimensions to the .45 Colt cartridge, allowing many single-shot firearms, as well as derringers and revolvers chambered in that caliber, to fire .410 shot shells without any modifications.

The .480 Ruger (12.1×33mmR) is a large, high-power revolver cartridge, introduced in 2003 by Ruger and Hornady. It was the first new cartridge introduced by Ruger, and when introduced, was the largest-diameter production revolver cartridge, at .475 in (12.1 mm).

The .475 Linebaugh is a rimmed revolver cartridge developed by John Linebaugh in the late 1980s in response to the scarcity of the .348 Winchester brass required to form his .500 Linebaugh cartridge. The cartridge is based on the .45-70 Government case trimmed to 1.4 inches and loaded with .475-inch-diameter (12.1 mm) bullets. While dimensionally similar to the older .45 Silhouette cartridge, the .475 Linebaugh is loaded to considerably higher pressures, resulting in significantly different ballistic performance.

<span class="mw-page-title-main">.50 caliber handguns</span> Heavy handgun bullet/handgun

A .50 caliber handgun is a handgun firing a bullet measuring approximately 0.5 inches (12.7 mm) in diameter. Historically, many black powder pistols fired bullets with diameters well above a half inch. However, following the development of smokeless powder, the focus shifted to smaller-diameter bullets propelled at higher velocities, and the development of .50 and larger calibers in handguns became uncommon.

<span class="mw-page-title-main">Ruger Blackhawk</span> Revolver

The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.

<span class="mw-page-title-main">Magnum Research BFR</span> Revolver

The Magnum Research BFR is a single-action revolver manufactured by Magnum Research. Modeled after the Ruger Blackhawk, it is constructed of stainless steel and chambered for a number of powerful handgun cartridges, such as .460 S&W Magnum and .500 S&W Magnum; popular rifle chamberings, including .30-30 WCF, .444 Marlin, and .45-70 Government; and even .410 bore shotshells. Notably, the BFR platform has also served as the basis for custom caliber conversions to 19th century big game cartridges such as the .50-110 WCF and .50-90 Sharps, as well as the .500 Bushwhacker, which is currently considered to be the most powerful handgun cartridge in the world in terms of muzzle energy. The name "BFR" originally stood for “Brainerd’s First Revolver”, in reference to Brainerd, Minnesota, where the early BFRs were manufactured. Officially the acronym now stands for "Biggest, Finest Revolver", though it was rebranded for a time as the “Big Frame Revolver” after Magnum Research’s 2010 acquisition by Kahr Arms. It is sometimes referred to as the "Big Fucking Revolver", but this is a misnomer often used for humorous effect and has never been officially sanctioned by manufacturers.

John Linebaugh was an American gunsmith from Cody, Wyoming, known for creating custom firearms. He was the inventor of the .500 Linebaugh (1986) and .475 Linebaugh (1988) cartridges. Gunwriter John Taffin, a big-bore enthusiast, describes Linebaugh as a "pioneer" in developing powerful sixguns.

<span class="mw-page-title-main">Elmer Keith</span> American rancher and handgun developer (1899–1984)

Elmer Merrifield Keith was an American rancher, firearms enthusiast, and author. Keith was instrumental in the development of the first magnum revolver cartridge, the .357 Magnum (1935), as well as the later .44 Magnum (1956) and .41 Magnum (1964) cartridges, credited by Roy G. Jinks as "the father of big bore handgunning." Keith was born in Hardin, Missouri, and overcame serious injuries that he had sustained at age 12 in a fire when he was living in Missoula, Montana.

<span class="mw-page-title-main">Super magnum</span>

A super magnum is a longer and/or more powerful version of a "magnum" cartridge. Although the term "super magnum" typically refers to a handgun cartridge, created by lengthening an existing straight-case design, it can also refer to rifle and shotgun cartridges, such as the .17 Winchester Super Magnum and the 312" 12 Gauge Super Magnum. In this case, it simply denotes that it is of greater power than existing "magnums" of a similar caliber or gauge, this is comparable to other designations, such as the "Remington Ultra Magnum". The most widespread of these cartridges are the "SuperMag" family of super-magnum handgun cartridges that were proposed and tested by Elgin Gates in the 1970s.

<span class="mw-page-title-main">Freedom Arms</span>

Freedom Arms is a Freedom, Wyoming based firearm manufacturing company, known for producing powerful single-action revolvers. The company was founded in 1978 by Wayne Baker and Dick Casull to produce the Mini-Revolver, then later a revolver chambered in Casull's powerful .454 Casull revolver cartridge. This 5-shot revolver was the Model 83. Freedom Arms currently makes a single-shot pistol in addition to their revolvers.

<span class="mw-page-title-main">.500 Linebaugh</span> Revolver cartridge

The .500 Linebaugh is a .50 caliber handgun cartridge designed for use in revolvers. It is considered one of the most powerful handgun cartridges designed in terms of kinetic energy and power factor (momentum).

The .500 S&W Magnum or 12.7×41mmSR is a .50 caliber semi-rimmed revolver cartridge developed by Cor-Bon in partnership with the Smith & Wesson "X-Gun" engineering team for use in the Smith & Wesson Model 500 X-frame revolver and introduced in February 2003 at the SHOT Show. From its inception, it was intended to be the most powerful handgun cartridge to date, with the capacity to harvest all North American game species. While more powerful handgun cartridges, such as the .500 Bushwhacker, have emerged since, they are only available in custom firearms, and the .500 S&W remains the most powerful production handgun cartridge.

<span class="mw-page-title-main">Dick Casull</span>

Richard J. Casull was a Salt Lake City-born gunsmith and wildcat cartridge developer whose experiments with .45 Colt ammunition in the 1950s led to the creation of the .454 Casull cartridge. Casull's passion was six-shooters, and he was determined to create a high velocity round for the .45 Colt. His goal was to achieve a muzzle velocity of 2,000 feet per second with Colt .45 rounds fired from a single-action Army-style revolver with a 7+12inch barrel. This proved impossible due to the tensile strength of the Colt .45 cylinder, so he set out to develop his own casing and bullet.

<span class="mw-page-title-main">.500 Bushwhacker</span> Revolver cartridge designed by James and Keith Tow

The .500 Bushwhacker is a .50 caliber semi-rimmed revolver cartridge developed by TII Armory for the Magnum Research BFR revolvers. It is currently the most powerful revolver cartridge in the world, offering a similar level of ballistic performance to African stopping rifles, such as the .416 Rigby and .470 Nitro Express. Given comparable barrel lengths, it is nearly twice as powerful as the .500 S&W Magnum. A 10-inch barrel revolver chambered in the cartridge is capable of penetrating 96-inches of 10% Clear Ballistics gel.

References

  1. The .500 Wyoming Express from Freedom Arms by Jeff Quinn, November 7, 2005
  2. Taffin, John (April 2006). "Freedom Arms' Biggest Big Bore". Guns . FMG Publications: 46–51.
  3. The .500 Wyoming Express by Brian Pearce in Guns & Ammo Handguns
  4. "Reformed Starline Brass .500 Wyoming Express (SHIPS FREE)-SL". TII Machine. Retrieved 2023-03-29.