12 mm Lefaucheux

Last updated
12 mm Lefaucheux
12x17mm Lefaucheux metallic horizontal.jpg
TypeRevolver
Service history
In service1858–1892
Used byFrench Navy and French Army
Production history
Designed1858
Specifications
Case typeRimmed, straight
Bullet diameter11.3 mm (0.44 in)
Neck diameter11.8 mm (0.46 in)
Base diameter11.9 mm (0.47 in)
Rim diameter12.6 mm (0.50 in)
Rim thickness0.94 mm
Case length19.9 mm (0.78 in)
Overall length30.8 mm (1.21 in)

The 12mm Lefaucheux is a metallic center-fire cartridge. It was originally created as a rimless pinfire cartridge using black powder employed by the French navy on the Lefaucheux M1858 revolver. Later it was adapted to a center-fire cartridge by the French Army in 1873 for use on the MAS 1873 revolver.

Contents

Overview

Originally, the 12 mm, was a classic Lefaucheux cartridge, with a side pin from its introduction in 1858 until 1873, when it was adapted and became a rimmed center-fire cartridge for use in the MAS revolver 1873-1874 then used by the French Army. [1]

Features

The 12mm Lefaucheux. 12x17mm Lefaucheux metallic.jpg
The 12mm Lefaucheux.

These are the characteristics of the '12 mm Lefaucheux' cartridge: [1] [2] [3] [4]

These are the most frequently encountered ("headstamp") tags: [3]

In these markings, the initials "G. E" referring to the manufacturer "Ernest Gaupillat", and the other letter and digits referring to the batch (probably place and date). [3]

Dimensions

12x17mm Lefaucheux fixed dimensions.jpg

See also

Related Research Articles

<span class="mw-page-title-main">Cartridge (firearms)</span> Ammunition consisting of a casing, projectile, propellant, and primer

A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.

<span class="mw-page-title-main">.38 Special</span> Revolver cartridge designed by Smith & Wesson

The .38 Special, also commonly known as .38 S&W Special, .38 Smith & Wesson Special, .38 Spl, .38 Spc, or 9x29mmR is a rimmed, centerfire cartridge designed by Smith & Wesson.

<span class="mw-page-title-main">Caliber</span> Internal diameter of the barrel of a gun

In guns, particularly firearms, caliber is the specified nominal internal diameter of the gun barrel bore – regardless of how or where the bore is measured and whether the finished bore matches that specification. It is measured in inches or in millimeters. In the United States it is expressed in hundredths of an inch; in the United Kingdom in thousandths; and elsewhere in millimeters. For example, a US "45 caliber" firearm has a barrel diameter of roughly 0.45 inches (11 mm). Barrel diameters can also be expressed using metric dimensions. For example, a "9 mm pistol" has a barrel diameter of about 9 millimeters. Since metric and US customary units do not convert evenly at this scale, metric conversions of caliber measured in decimal inches are typically approximations of the precise specifications in non-metric units, and vice versa.

<span class="mw-page-title-main">.357 Magnum</span> Revolver cartridge

The .357 Smith & Wesson Magnum, .357 S&W Magnum, .357 Magnum, or 9×33mmR is a smokeless powder cartridge with a 0.357 in (9.07 mm) bullet diameter. It was created by Elmer Keith, Phillip B. Sharpe, and Douglas B. Wesson of firearm manufacturers Smith & Wesson and Winchester. The .357 Magnum cartridge is notable for its highly effective terminal ballistics.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 14 years, before being replaced by the .38 Long Colt in 1892.

<span class="mw-page-title-main">.38 Long Colt</span> Revolver cartridge

The .38 Long Colt, also known as .38 LC, is a black powder cartridge introduced by Colt's Manufacturing Company in 1875. In 1892, it was adopted as a standard military pistol cartridge by the United States Army for the Colt M1892 revolver. The metric designation for the .38 Long Colt is 9.1×26mm. It is slightly more powerful than the .38 Short Colt, also known as .38 SC. The original .38 SC and .38 LC differ in case length, bullet diameter, weight, and design and are not interchangeable; however, modern production .38 SC ammunition is now loaded with a smaller, internally-lubricated bullet which can be fired from firearms chambered in .38 LC or .38 Special. The modern .38 LC can be fired from .38 Special firearm, but not from a firearm designed for the .38 SC, since the case length is too long.

<span class="mw-page-title-main">.32 S&W</span> Revolver cartridge designed by the Smith & Wesson Company (S&W)

The .32 S&W cartridge was introduced in 1878 for Smith & Wesson pocket revolvers. It was originally designed as a black powder cartridge. The .32 S&W was offered to the public as a light defense cartridge for "card table" distances.

<span class="mw-page-title-main">.32 S&W Long</span> American handgun cartridge

The .32 S&W Long, also known as 7.65x23mm, is a straight-walled, centerfire, rimmed handgun cartridge, based on the earlier .32 S&W cartridge. It was introduced in 1896 for Smith & Wesson's first-model Hand Ejector revolver. Colt called it the .32 Colt New Police in revolvers it made chambered for the cartridge.

<span class="mw-page-title-main">Wildcat cartridge</span> Custom cartridge for firearms

A wildcat cartridge, often shortened to wildcat, is a custom cartridge for which ammunition and/or firearms are not mass-produced. These cartridges are often created in order to optimize a certain performance characteristic of an existing commercial cartridge, or may merely be intended as novelty items.

<span class="mw-page-title-main">7×57mm Mauser</span> German military rifle cartridge

The 7×57mm Mauser is a first-generation smokeless powder rimless bottlenecked rifle cartridge. It was developed by Paul Mauser of the Mauser company in 1892 and adopted as a military cartridge by Spain in 1893. It was subsequently adopted by several other countries as the standard military cartridge, and although now obsolete as a military cartridge, it remains in widespread international use as a sporting round. The 7×57 Mauser was a popular stalking cartridge and sporting rifles in this chambering were made by the famous British riflemakers, such as John Rigby, Holland and Holland, Westley Richards and others. British cartridge nomenclature designated caliber in inches, and the cartridge was known as the .275 bore after the measurement of a 7 mm rifle's bore across the lands.

<span class="mw-page-title-main">.45-70</span> Rifle cartridge designed by the U.S. Army

The .45-70, also known as the .45-70 Government, .45-70 Springfield, and .45-2110" Sharps, is a .45 caliber rifle cartridge originally holding 70 grains of black powder that was developed at the U.S. Army's Springfield Armory for use in the Springfield Model 1873. It was a replacement for the stop-gap .50-70 Government cartridge, which had been adopted in 1866, one year after the end of the American Civil War, and is known by collectors as the "Trapdoor Springfield".

<span class="mw-page-title-main">.220 Swift</span> Rifle cartridge

The .220 Swift (5.56×56mmSR) is a semi-rimmed rifle cartridge developed by Winchester and introduced in 1935 for small game and varmint hunting. It was the first factory-loaded rifle cartridge with a muzzle velocity of over 1,200 m/s (4,000 ft/s).

<span class="mw-page-title-main">.300 Winchester Short Magnum</span> Centerfire rifle cartridge developed by Winchester

300 Winchester Short Magnum is a .30 caliber rebated rim bottlenecked centerfire short magnum cartridge that was introduced in 2001 by Winchester.

<span class="mw-page-title-main">.458 SOCOM</span> Rifle cartridge

The .458 SOCOM (11.63×40mm) is a moderately large round designed to work in an AR-15 platform. This is achieved by installing a 458 bolt and barrel. The 300-grain (19 g) round offers a supersonic muzzle velocity of 1,900 ft/s (580 m/s) and 2,405 ft⋅lbf (3,261 J), similar to a light .45-70 but with a much smaller case.

<span class="mw-page-title-main">.325 Winchester Short Magnum</span> Rifle cartridge

The .325 Winchester Short Magnum, commonly known as the 325 WSM, is an 8mm caliber rebated rim bottlenecked centerfire short magnum medium bore cartridge. The cartridge was introduced by Winchester Ammunition in 2005.

<span class="mw-page-title-main">.56-56 Spencer</span> American black powder rifle cartridge

The .56-56 Spencer was an American black powder rifle cartridge.

<span class="mw-page-title-main">Power factor (shooting sports)</span> Ranking system for the momentum of pistol cartridges in competitive practical shooting

Power Factor (PF) in practical shooting competitions refers to a ranking system used to reward cartridges with more recoil. Power factor is a measure of the momentum of the bullet, which to some degree reflects the recoil impulse from the firearm onto the shooter.

<span class="mw-page-title-main">.476 Enfield</span> Black powder revolver cartridge

The .476 Enfield, also known as the .476 Eley, .476 Revolver, and occasionally .455/476, is a British centrefire black powder revolver cartridge. The Enfield name derives from the location of the Royal Small Arms Factory at Enfield Lock, the armoury where British military small arms were produced, while Eley was a British commercial brand. Used in the Enfield Mk II revolver, the Mk III variant was introduced by the British Army in 1881, supplanting the earlier .476 Enfield Mark I and II cartridges, which in turn had replaced the .450 Adams cartridges, all of which also used black powder propellant.

<span class="mw-page-title-main">MAS 1873 revolver</span> Service Revolver

The service revolver model 1873 Chamelot-Delvigne was the first double-action revolver used by the French Army. It was produced by Manufacture d'armes de Saint-Étienne from 1873 to 1887 in about 337,000 copies. Although replaced by the Modele 1892 revolver, it was nevertheless widely used during the First World War and issued to reserve units in 1940. The French Resistance made widespread use of it during the German occupation.

The .500 S&W Magnum or 12.7×41mmSR is a .50 caliber semi-rimmed revolver cartridge developed by Cor-Bon in partnership with the Smith & Wesson "X-Gun" engineering team for use in the Smith & Wesson Model 500 X-frame revolver and introduced in February 2003 at the SHOT Show. From its inception, it was intended to be the most powerful handgun cartridge to date, with the capacity to harvest all North American game species. While more powerful handgun cartridges, such as the .500 Bushwhacker, have emerged since, they are only available in custom firearms, and the .500 S&W remains the most powerful production handgun cartridge.

References

  1. 1 2 "Le revolver modèle 1873 à destination de la marine". revolver1873.fr. Retrieved 2021-06-14.
  2. "12 mm Lefaucheux - Cartucho 12 x 17 mm./ ECRA-ECDV 11 017 CLP 010". old.municion.org. Retrieved 2021-06-14.
  3. 1 2 3 Yves Etievant. "11 ou 12 Marine". Winchesterguns.com. Retrieved 2021-06-14.
  4. "rechargement 11mm pour 1873". TIR et COLLECTION Armes Règlementaires. 2017-03-20. Retrieved 2021-06-14.