AV (cyclecar)

Last updated

1919 AV Monocar 1919AVMonocar.jpg
1919 AV Monocar

The AV was a British cyclecar manufactured by Ward and Avey in Somerset Road, Teddington Middlesex between 1919 and 1924.

Contents

It was one of the more successful cyclecars and was based on a design bought from Carden and built in the factory that they had previously used. At the peak they had 80 employees.

The first model was a single-seater, the Monocar, only 30 inches (760 mm) wide with bodies built by the Thames Valley Pattern Works [1] out of wood, plywood or even compressed paper. The complete car only weighed about 550 pounds (250 kg). [1] Engines were rear mounted, air-cooled and rated from 5 to 8hp. There was a choice of JAP (most commonly), Blackburne or rarely MAG units. [1] Gearboxes were either a two-speed epicyclic unit with foot-operated change or three-speed Sturmey-Archer [1] with chain drive to the rear axle. Steering was by a wire and bobbin system with the entire front axle being pivoted on early cars. Several hundred were made.

The Monocar was described by Ixion of The Motor Cycle as "a low, coffin-shape projectile, moderately attractive in dense fog. [2]

In 1920 a two-seater, the Bi-car, was added with the passenger behind the driver. The width of the car increased to 36 inches. [1] About 50 were made. [3] A more conventional side by side model was added in 1921 called the Runabout with a 42-inch (1,100 mm) body 126 inches (3,200 mm) long. The original Monocar and Bi-car were dropped in 1922 but production of the Runabout continued until 1924 and later to special order. [3]

The company changed its name in 1923 to A.V. Motors Ltd and after the end of car production became Jowett and later Rootes Group dealers. [3]

See also

Related Research Articles

AC Cars British specialist automobile manufacturer

AC Cars, originally incorporated as Auto Carriers Ltd., is a British specialist automobile manufacturer and one of the oldest independent car makers founded in Britain. As a result of bad financial conditions over the years, the company was renamed or liquidated many times until its present form.

Fiat X1/9 Motor vehicle

The Fiat X1/9 is a two-seater mid-engined sports car designed by Bertone and manufactured by Fiat from 1972–1982 and subsequently by Bertone from 1982–1989.

Saxon Motor Car Company

The Saxon Motor Car Company was located in Detroit, Michigan, from 1914 to 1922. In 1917, 28,000 cars were made, making it the seventh largest car maker in the United States.

The Ashton-Evans was an English car manufactured in Birmingham from 1919 to 1928 by Joseph Evans & Co of Liverpool Street Mills an engineering company who also made railway locomotives and aircraft parts. In 1919 a new company Ashton-Evans Motors Ltd was formed. The cars were designed by E Bailey who had been with Sunbeam and later J. Bedford.

Albion Motors

Albion Motors was a Scottish automobile and commercial vehicle manufacturer.

Cadillac Runabout and Tonneau

The first Cadillac automobiles were the 1903 Model built in the last quarter of 1902. These were 2-seater "horseless carriages" powered by a reliable and sturdy 10 hp (7 kW) single-cylinder engine developed by Henry Martyn Leland and built by Leland and Faulconer Manufacturing Company of Detroit, of which Henry Leland was founder, vice-president and general manager.

Coventry Premier

Coventry Premier Limited owned a British car and cyclecar manufacturing business based in Coventry from 1912 to 1923. It changed its name from Premier Cycles to Coventry Premier Ltd in November 1914.

GN (car)

The GN was a British cyclecar made in London, between 1910 and 1925, The name derived from its founders, H.R. Godfrey and Archibald Frazer-Nash. Production ceased in 1923 but the company kept trading until 1925.

The Elfe was a French automobile, manufactured in Lavallois, Paris, from 1919 until about 1925 by Ateliers Defrance Freres. The company was founded by M. Eugene Mauve, who was also the instigator of the Bol d'Or race for cyclecars and latterly motorcycles, now held at the Le Mans circuit in France. During its brief life, the company entered numerous races, under various names including ELFE, Elfe-Anzani, Elfe-DeFrance and Mauve.

The Rover 8 was a small single-cylinder 8 hp 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912, A Daimler-Knight sleeve-valve engine option was available in 1911 and 1912.

Carden (cyclecar) Motor vehicle

The Carden was a British 4 wheeled cyclecar made from 1914 by Carden Engineering originally based in Farnham, Surrey but moving in 1914 to Teddington, Middlesex and in 1919 to Ascot, Berkshire.

The Perry was a British car made by the Perry Motor Company based in Tyseley, Birmingham who made cars between 1913 and 1916.

The Dewcar was a British four-wheeled cyclecar made from 1913 to 1914 by D.E.W. Engineering Co Ltd of Eynsford, Kent. The car was designed by Harold E. Dew and was developed through a series of one-offs starting in 1910.

T.B. (Thompson Brothers) Motor vehicle

T.B. was a three-wheeled cyclecar manufactured by the aircraft department of Thompson Brothers of Bilston, England, from 1919 until 1924. A prototype four-wheel car never entered production. Approximately 150 cars were produced of which only one example is believed to have survived.

Little Midland Motor vehicle

The Little Midland or LM was a British 4-wheeled cyclecar made from 1910 to 1922 by the Little Midland Light Car Co Ltd in various places in Lancashire.

SIMA-Violet

Sima Violet was a French manufacturer of cyclecars between 1924 and 1929.

Duocars Ltd of 70 York Street, London was a maker of cycle cars founded in 1910. The cars were built in Alpha Street, Deptford, London. The company was founded by Mr L.F. de Peyrecave.

The Day-Leeds was a British automobile manufactured by Job Day & Sons of Leeds, Yorkshire.

Rhode (car)

The Rhode was a British car made from 1921 to 1930. Mead and Deakin Ltd had started in business making cycle and motor cycle components. They also made the "Canoelet" sidecar. In 1912 they made at least two cyclecars under the name of Medea with 1244cc Chapuis-Dornier engines but these did not go into series production.

Arthur William Wall

Arthur William Horace Wall (c1874-1943) was an engineer in the field of motorised transport and inventor of the self-powered wheel in England in the early 20th century. He is best known for his creation of the self-powered wheel, the Wall Autowheel, which could be used to power a bicycle, but he was also the man behind Roc motorcycles and a tricar and 4-wheel cyclecar. His main company was A.W. Wall Ltd, but he created several other companies to compartmentalise his different activities, such as the Roc Gear Co, who supplied epicyclic gears to a significant number of manufacturers before WW1.

References

  1. 1 2 3 4 5 Baldwin, N. (1994). A-Z of Cars of the 1920s. Devon, UK: Bay View Books. ISBN   1-870979-53-2.
  2. Davies, BH (20 October 1955). "Occasional Comments". The Motor Cycle. London: Iliffe & Sons Ltd. 95 (2741): 477.
  3. 1 2 3 Georgano, N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN   1-57958-293-1.