Accredited Crane Operator Certification

Last updated

Accredited Crane Operator Certification OSHA regulation 29 CFR 1926 Subpart CC, released August 9, 2010, requires crane operators involved in construction to be certified by an accredited certification provider by November 10, 2014. [1] An operator is defined as any person operating the equipment. To be accredited, certification providers must be accredited by a nationally recognized accrediting agency, defined as "an organization that, due to its independence and expertise, is widely recognized as competent to accredit testing organizations. Examples of such accrediting agencies include, but are not limited to, the National Commission for Certifying Agencies and the American National Standards Institute." [2] This is the first time certification by an accredited certification provider has been required on a national level, although individual states (e.g., West Virginia, Hawaii, California) and cities (Chicago, New York, and Philadelphia) have required crane operator certification as far back as 2000. The new OSHA standards make the completion of this requirement an important topic of knowledge for the crane and lifting industry.

The Occupational Safety and Health Administration (OSHA) is an agency of the United States Department of Labor. Congress established the agency under the Occupational Safety and Health Act, which President Richard M. Nixon signed into law on December 29, 1970. OSHA's mission is to "assure safe and healthy working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance". The agency is also charged with enforcing a variety of whistleblower statutes and regulations. OSHA is currently headed by Acting Assistant Secretary of Labor Loren Sweatt. OSHA's workplace safety inspections have been shown to reduce injury rates and injury costs without adverse effects to employment, sales, credit ratings, or firm survival.

American National Standards Institute non-profit organization in the United States that develops standards

The American National Standards Institute is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States. The organization also coordinates U.S. standards with international standards so that American products can be used worldwide.

Contents

History

OSHA Regulation 1926.1427: Operator Qualification and Certification

According to the new OSHA regulation, employers are now responsible for ensuring the qualification and certification of any operators on their job site. It states, "The employer must ensure that ... the operator is qualified or certified to operate the equipment." Employers are also responsible to provide the certification at no cost to the operators. This new emphasis on qualification and certification has created a large need in the industry to be filled by various certifying companies.

1926.1427(b): Certification by an accredited crane operator testing organization

Organizations that offer certification must meet a number of guidelines established by OSHA. One of the main requirements for certifying organizations is that they be accredited by a "nationally recognized accrediting agency." The two main accrediting agencies used in this process are the National Commission for Certifying Agencies (NCCA) and the American National Standards Institute (ANSI). NCCA was the first certifying agency to grant accreditation for crane and rigging personnel. It is the oldest provider of certification tests in the USA. ANSI is the other nationally recognized accrediting organization; ANSI also internationally accredits personnel certification programs to ISO 17024 (General Requirements for Bodies Operating Certification Systems of Persons). ANSI provides 45 personnel accreditation's across multiple industries.

Certification organizations

A number of organizations have been recognized by OSHA for offering certification in the crane and lifting industry. These organizations include the not-for-profit organizations National Center for Construction Education and Research (NCCER), [9] the National Commission for the Certification of Crane Operators (NCCCO), and the Operating Engineers Certification Program (OECP).

The National Center for Construction Education and Research, commonly referred to by the acronym NCCER, is a not-for-profit 501(c)(3) education foundation for professional craft certification, formed in 1996.

Certification process

Operators attempting to gain certification must pass both a written and practical examination. These tests must also be routinely audited for the certifying agencies to maintain their accreditation. OSHA regulation 1926.1427(j) describes the standards both the written and practical tests must meet. However, these tests will greatly vary depending on which organization administers them.

Related Research Articles

Safety state of being secure from harm, injury, danger or risk

Safety is the state of being "safe", the condition of being protected from harm or other non-desirable outcomes. Safety can also refer to the control of recognized hazards in order to achieve an acceptable level of risk.

Occupational Safety and Health Act (United States)

The Occupational Safety and Health Act of 1970 is a US labor law governing the federal law of occupational health and safety in the private sector and federal government in the United States. It was enacted by Congress in 1970 and was signed by President Richard Nixon on December 29, 1970. Its main goal is to ensure that employers provide employees with an environment free from recognized hazards, such as exposure to toxic chemicals, excessive noise levels, mechanical dangers, heat or cold stress, or unsanitary conditions. The Act created the Occupational Safety and Health Administration (OSHA) and the National Institute for Occupational Safety and Health (NIOSH).

Construction work is a hazardous land-based job. Some construction site jobs include: building houses, roads, tree forts, workplaces and repair and maintain infrastructures. This work includes many hazardous task and conditions such as working with height, excavation, noise, dust, power tools and equipment. The most common fatalities are caused by the fatal four: falls, being struck by an object, electrocutions, and being caught in between two objects. Construction work has been increasing in developing and undeveloped countries over the past few years. With an increase in this type of work occupational fatalities have increased. Occupational fatalities are individuals who die while on the job or performing work related tasks. Within the field of construction it is important to have safe construction sites.

Confined space A space with limited entry and egress and not suitable for human inhabitants

A confined space is a space with limited entry and egress and not suitable for human inhabitants. An example is the interior of a storage tank, occasionally entered by maintenance workers but not intended for human occupancy. Hazards in a confined space often include harmful dust or gases, asphyxiation, submersion in liquids or free-flowing granular solids, electrocution, or entrapment.

Process safety management

Process safety managementsystem is a regulation promulgated by the U.S. Occupational Safety and Health Administration (OSHA). A process is any activity or combination of activities including any use, storage, manufacturing, handling or the on-site movement of highly hazardous chemicals (HHCs) as defined by OSHA and the Environmental Protection Agency.

Accreditation is the process in which certification of competency, authority, or credibility is presented.

The Michigan Occupational Safety and Health Administration (MIOSHA) is a state government agency that regulates workplace safety and health in the U.S. state of Michigan. Michigan OSHA is an agency within the Michigan Department of Licensing and Regulatory Affairs and operates under a formal state-plan agreement with the Occupational Safety and Health Administration (OSHA).

Environment (E), health (H) and safety (S) is a discipline and specialty that studies and implements practical aspects of environmental protection and safety at work. In simple terms it is what organizations must do to make sure that their activities do not cause harm to anyone. Commonly, quality - quality assurance & quality control - is adjoined to form the company division known as HSQE.

The Certified Safety Professional (CSP) is a certification offered by the Board of Certified Safety Professionals (BCSP). The CSP is accredited in the United States by the National Commission for Certifying Agencies and internationally by the International Organization for Standardization/International Electrotechnical Commission and 193 Countries Consortium.

The Oregon Occupational Safety and Health Division is a state government agency that regulates workplace safety and health in the U.S. state of Oregon. Oregon OSHA is a division of the Oregon Department of Consumer and Business Services and operates under a formal state-plan agreement with Occupational Safety and Health Administration (OSHA). Oregon OSHA's regulatory authority comes from the Oregon Safe Employment Act (OSEA); its jurisdiction covers most public and private sector workplaces in the state. Oregon OSHA's expressed mission is "to advance and improve workplace safety and health for all workers in Oregon."

Nationally Recognized Testing Laboratory is the term used by the United States Occupational Safety and Health Administration to identify third-party organizations that have the necessary qualifications to perform safety testing and certification of products covered within OSHA and each organization's scopes. The testing and certification are conducted in accordance with U.S. consensus-based product safety test standards developed or issued by U.S. standards organizations

The Institute for Credentialing Excellence (ICE) is one of the two main U.S. organizations that accredit personnel certifications or certificates. In November 2009 the ICE formally changed its name from the National Organization for Competency Assurance (NOCA).

Occupational safety and health Field concerned with the safety, health, and welfare of people at work

Occupational safety and health (OSH), also commonly referred to as occupational health and safety (OHS), occupational health, or workplace health and safety (WHS), is a multidisciplinary field concerned with the safety, health, and welfare of people at work. These terms also refer to the goals of this field, so their use in the sense of this article was originally an abbreviation of occupational safety and health program/department etc.

Voluntary Protection Program

Voluntary Protection Programs (VPP) is an Occupational Safety and Health Administration (OSHA) initiative that encourages private industry and federal agencies to prevent workplace injuries and illnesses through hazard prevention and control, worksite analysis, training; and cooperation between management and workers. VPP enlists worker involvement to achieve injury and illness rates that are below national Bureau of Labor Statistics averages for their respective industries.

Work-related road safety in the United States

People who are driving as part of their work duties are an important road user category. First, workers themselves are at risk of road traffic injury. Contributing factors include fatigue and long work hours, delivery pressures, distractions from mobile phones and other devices, lack of training to operate the assigned vehicle, vehicle defects, use of prescription and non-prescription medications, medical conditions, and poor journey planning. Death, disability, or injury of a family wage earner due to road traffic injury, in addition to causing emotional pain and suffering, creates economic hardship for the injured worker and family members that may persist well beyond the event itself.

Associated Training Services, commonly known as ATS is a heavy equipment training institution based in Sun Prairie, Wisconsin. It was founded in 1959 by Robert Klabacka as the National Institute of Concrete Construction. The institute offers training programs in heavy equipment, mobile cranes, construction-related trucks, rigging, signaling, and commercial motor vehicles. ATS is one of the oldest training institution in United States of America has been an accredited sponsor providing accredited crane operator certification through the National Center for Construction Education and Research (NCCER), in Alachua, Florida since 2003, and the National Commission for the Certification of Crane Operators (NCCCO)

National Commission for the Certification of Crane Operators commonly referred to by the acronym NCCCO is a non-profit organization, established in January 1995 and headquartered in Fairfax, Virginia, United States with regional offices in Dunedin, Florida; Murray, Utah; Redding, California; and Seguin, Texas, for the certification of crane operators.

Diving regulations are the stipulations of the delegated legislation regarding the practice of underwater diving.

References

  1. "Safety and Health Regulations for Construction: Cranes & Derricks in Construction". Occupational Safety & Health Administration. August 9, 2010. Retrieved February 1, 2010.
  2. "Safety and Health Regulations for Construction: Definitions". Occupational Safety & Health Administration. August 9, 2010. Retrieved February 7, 2010.
  3. "Cranes and Derrick in Construction: Final Rule". Occupational Safety & Health Administration. July 28, 2010. Retrieved February 7, 2010.
  4. Crane Accidents, Statistics, , "Crane Accidents" July 27, 2010, accessed February 7, 2010. Archived October 19, 2006, at the Wayback Machine
  5. "Cranes and Derrick in Construction: Authority for 1926 Subpart CC". Occupational Safety & Health Administration. August 9, 2010.
  6. "OSHA Recognizes Another ANSI-Accredited Crane Operator Certification Program". ANSI. May 17, 2010. Retrieved 3 November 2018.
  7. "Cranes and Derrick in Construction: Operator qualification and certification". Occupational Safety & Health Administration. September 26, 2014.
  8. "Cranes and Derricks in Construction: Operator Certification". Occupational Safety and Health Administration .
  9. "NCCER and OSHA Align for Crane Safety". Cision PR Web. 20 May 2010. Retrieved 4 November 2018.