Armstrong's mixture

Last updated

Armstrong's mixture is a highly sensitive primary explosive. It is very friction-sensitive. [1] Formulations vary, but one consists of 67% potassium chlorate, 27% red phosphorus, 3% sulfur, and 3% calcium carbonate. [2] [3] It is named for Sir William Armstrong, who invented it sometime prior to 1872 for use in explosive shells. [4]

Contents

Toys

Armstrong's mixture can be used as ammunition for toy cap guns. The mixture is suspended in water with some gum arabic or similar binder and deposited in drops, each containing a few milligrams of explosive, to dry between layers of paper backing. The dots explode with some smoke when struck. [2]

Armstrong's mixture can be used in impact firecrackers known as cap torpedoes, which explode on impact when the ball (made of clay or papier-mâché) is thrown or launched by slingshot. The firecrackers may include gravel with the explosive mixture to ensure detonation. [3]

Military use

With the addition of a grit such as boron carbide (in a modified formulation given as 70% KClO3, 19% red phosphorus, 3% sulfur, 3% chalk, and 5% boron carbide by weight), Armstrong's mixture has been considered for use in firearm primers. [5] This use as primer for artillery propellants may have been Armstrong's original purpose. [6]

Armstrong's mixture has been used in thrown impact-detonated improvised explosive devices, made simply by loading it into hollow balls. [1] It also was seen in various patents for matches, novelty fireworks, and signalling devices. [6]

Safety

Armstrong's mixture is both very sensitive and very explosive, a dangerous combination that limits its practical use to toy caps. [7] Such toy caps and fireworks typically contain no more than 10 milligrams each, but gram quantities can cause maiming hand injuries. [8]

The mixture is likely to explode if mixed dry and is even dangerous wet. [7] It is recommended that Armstrong's mixture be prepared as a slurry in water and adjusted to a slightly basic pH with an alkaline buffer, such as calcium carbonate, in order to neutralize any acid that may have been generated by oxidized phosphorus on contact with the water, which would cause it to deteriorate while slowly drying. [9] [3] The wet slurry or paste is loaded into the fireworks, then allowed to dry. [3]

Simple mixtures of red phosphorus and potassium chlorate can detonate at a wide range of proportions; a 20% phosphorus mixture had 27% of the equivalent power of a like mass of TNT in a laboratory experiment, and the detonation of the 10% and 20% phosphorus mixtures even in small unconfined samples of 1 gram was described by the authors as "impressive" and "scary". [7] Pyrotechnician John Donner wrote in 1996 that it "is the most hazardous mixture commonly used in small fireworks." [3] Davis Tenney called it "a combination which is the most sensitive, dangerous, and unpredictable of the many with which the pyrotechnist has to deal. Their preparation ought under no conditions to be attempted by an amateur." [9]

Toy charges, such as the several-milligram dots used for cap guns, are individually harmless but potentially dangerous in large numbers. [2] On May 14, 1878, such an accident occurred in Paris. A store containing some six to eight million paper caps, totaling about 64 kilograms of explosive mass, caught fire and exploded, killing 14 and injuring 16 more. [6]

Related Research Articles

<span class="mw-page-title-main">Explosive</span> Substance that can explode

An explosive is a reactive substance that contains a great amount of potential energy that can produce an explosion if released suddenly, usually accompanied by the production of light, heat, sound, and pressure. An explosive charge is a measured quantity of explosive material, which may either be composed solely of one ingredient or be a mixture containing at least two substances.

<span class="mw-page-title-main">Tetryl</span> Chemical compound

2,4,6-Trinitrophenylmethylnitramine commonly referred to as tetryl (C7H5N5O8) is an explosive compound used to make detonators and explosive booster charges.

<span class="mw-page-title-main">Detonator</span> Device used to trigger an explosion

A detonator, frequently a blasting cap, is a device used to trigger an explosive device. Detonators can be chemically, mechanically, or electrically initiated, the last two being the most common.

<span class="mw-page-title-main">Potassium chlorate</span> Chemical compound

Potassium chlorate is a compound containing potassium, chlorine and oxygen, with the molecular formula KClO3. In its pure form, it is a white crystalline substance. After sodium chlorate, it is the second most common chlorate in industrial use. It is a strong oxidizing agent and its most important application is in safety matches. In other applications it is mostly obsolete and has been replaced by safer alternatives in recent decades. It has been used

<span class="mw-page-title-main">Shell (projectile)</span> Payload-carrying projectile

A shell, in a military context, is a projectile whose payload contains an explosive, incendiary, or other chemical filling. Originally it was called a bombshell, but "shell" has come to be unambiguous in a military context. Modern usage sometimes includes large solid kinetic projectiles that is properly termed shot. Solid shot may contain a pyrotechnic compound if a tracer or spotting charge is used.

A triggering sequence, also called an explosive train or a firing train, is a sequence of events that culminates in the detonation of explosives. For safety reasons, most widely used high explosives are difficult to detonate. A primary explosive of higher sensitivity is used to trigger a uniform and predictable detonation of the main body of the explosive. Although the primary explosive itself is generally a more sensitive and expensive compound, it is only used in small quantities and in relatively safely packaged forms. By design there are low explosives and high explosives made such that the low explosives are highly sensitive and high explosives are comparatively insensitive. This not only affords inherent safety to the usage of explosives during handling and transport, but also necessitates an explosive triggering sequence or explosive train. The explosive triggering sequence or the explosive train essentially consists of an 'initiator', an 'intermediary' and the 'high explosive'.

<span class="mw-page-title-main">Centerfire ammunition</span> Type of ammunition common in higher-caliber firearms

A centerfire cartridge is a firearm metallic cartridge whose primer is located at the center of the base of its casing. Unlike rimfire cartridges, the centerfire primer is typically a separate component seated into a recessed cavity in the case head and is replaceable by reloading.

<span class="mw-page-title-main">Potassium perchlorate</span> Chemical compound

Potassium perchlorate is the inorganic salt with the chemical formula KClO4. Like other perchlorates, this salt is a strong oxidizer although it usually reacts very slowly with organic substances. This, usually obtained as a colorless, crystalline solid, is a common oxidizer used in fireworks, ammunition percussion caps, explosive primers, and is used variously in propellants, flash compositions, stars, and sparklers. It has been used as a solid rocket propellant, although in that application it has mostly been replaced by the higher performance ammonium perchlorate.

<span class="mw-page-title-main">Silver fulminate</span> High explosive used in bang snaps

Silver fulminate (AgCNO) is the highly explosive silver salt of fulminic acid.

<span class="mw-page-title-main">Flash powder</span>

Flash powder is a pyrotechnic composition, a mixture of oxidizer and metallic fuel, which burns quickly and produces a loud noise regardless of confinement. It is widely used in theatrical pyrotechnics and fireworks and was once used for flashes in photography.

<span class="mw-page-title-main">Hang fire</span> Unexpected delay after firearm triggering

Hang fire refers to an unexpected delay between the triggering of a firearm and the ignition of the propellant. This failure was common in firearm actions that relied on open primer pans, due to the poor or inconsistent quality of the powder. Modern firearms are also susceptible. The delay is usually too brief to be noticed, but can be several seconds. A hangfire should be suspected whenever a firearm fails to fire, but has not clearly malfunctioned.

<span class="mw-page-title-main">Ammonium chlorate</span> Chemical compound

Ammonium chlorate is an inorganic compound with the formula NH4ClO3.

Shock sensitivity is a comparative measure of the sensitivity to sudden compression of an explosive chemical compound. Determination of the shock sensitivity of a material intended for practical use is one important aspect of safety testing of explosives. A variety of tests and indices are in use, of which one of the more common is the Rotter Impact Test with results expressed as FoI At least four other impact tests are in common use, while various "gap tests" are used to measure sensitivity to blast shock.

<span class="mw-page-title-main">Cap gun</span> Toy gun using percussion caps to simulate gunshots and smoke

A cap gun, cap pistol, or cap rifle is a toy gun that creates a loud sound simulating a gunshot and smoke when a small percussion cap is ignited. Cap guns were originally made of cast iron, but after World War II were made of zinc alloy, and most newer models are made of plastic. Cap guns get their name from the small discs of shock-sensitive explosive compounds that provide the noise and smoke, effectively the same as the Maynard tape primer and percussion caps used in real firearms of the mid to late 1800s but usually smaller and made from cheap plastic or paper. Some are arranged in plastic rings of eight or twelve. There are also single caps, roll caps, disk caps, and cap strips all of which are actually extremely small versions of percussion fireworks. Armstrong's mixture is often used today as the explosive, but previously the tiny powder charge was a simple mixture of potassium perchlorate, sulfur, and antimony sulfide sandwiched between two paper layers that hold in the gases long enough to give a sound report when the cap is struck.

A pyrotechnic colorant is a chemical compound which causes a flame to burn with a particular color. These are used to create the colors in pyrotechnic compositions like fireworks and colored fires. The color-producing species are usually created from other chemicals during the reaction. Metal salts are commonly used; elemental metals are used rarely.

A pyrotechnic composition is a substance or mixture of substances designed to produce an effect by heat, light, sound, gas/smoke or a combination of these, as a result of non-detonative self-sustaining exothermic chemical reactions. Pyrotechnic substances do not rely on oxygen from external sources to sustain the reaction.

<span class="mw-page-title-main">Party popper</span> Pyrotechnic device used at parties

A party popper is a handheld pyrotechnic device commonly used at parties. It emits a loud popping noise by means of a small friction-actuated explosive charge that is activated by pulling a string. The explosive charge comes from a very small amount of Armstrong's mixture in the neck of the bottle-like shape. In some party poppers, the explosive charge is replaced by compressed air. In party poppers with an explosive charge, there are less than 0.25 grains (0.016 g) of explosive. The streamers are non-flammable for safe use. The charge or compressed air blows out some confetti or streamers and emits a popping sound. The charge is often composed of red phosphorus and strong oxidizer, such as potassium chlorate and potassium perchlorate.

<span class="mw-page-title-main">Potassium picrate</span> Chemical compound

Potassium picrate, or potassium 2,4,6-trinitrophenolate, is an organic chemical, a picrate of potassium. It is a reddish yellow or green crystalline material. It is a primary explosive. Anhydrous potassium picrate forms orthorhombic crystals.

<span class="mw-page-title-main">Bang snaps</span> Small harmless firework thrown for amusement

Bang snaps are a type of small novelty firework sold as a trick noisemaker.

In firearms and artillery, the primer is the chemical and/or device responsible for initiating the propellant combustion that will push the projectiles out of the gun barrel.

References

  1. 1 2 Laska, Paul R. (10 August 2015). Bombs, IEDs, and Explosives: Identification, Investigation, and Disposal Techniques. ISBN   9781498714501.
  2. 1 2 3 J. B. Calvert. "Flash! Bang! Whiz!: An introduction to propellants, explosives, pyrotechnics and fireworks". Archived from the original on 15 November 2006. Retrieved 2006-11-11.
  3. 1 2 3 4 5 John Donner. "Impact Firecrackers" (PDF). Archived from the original (PDF) on 2007-01-07. Retrieved 2006-11-11.
  4. ↑ Wagner, Johannes Rudolf (1872). A Handbook of Chemical Technology. J. & A. Churchill. p. 546.
  5. ↑ USpatent 3973502,Charles R Olsen,"Tube primer",issued 1976-08-10
  6. 1 2 3 Haarmann, Donald J. (1985). "Ask The Wiz". American Fireworks News (51). Archived from the original on 2001-02-16.
  7. 1 2 3 Kosanke, B. J.; Kosanke, K. L. (1996). "Explosive Limit of Armstrong's Mixture" (PDF). American Fireworks News (177). Archived (PDF) from the original on 2019-07-10. Retrieved 2022-12-04.
  8. ↑ "The powerful, unstable explosive found in children's toys". Gizmodo. 2013-04-09. Archived from the original on 2021-06-20. Retrieved 2022-12-04.
  9. 1 2 Davis, Tenney L. Chemistry of Powder and Explosives. pp. 105–106.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.