Ateliers et Chantiers de la Loire

Last updated
Ateliers et Chantiers de la Loire
Company type Private
Industry Shipbuilding
Founded1881
FateMerged into Chantiers de l'Atlantique (1955)
Headquarters Nantes and Saint-Nazaire, France
ProductsShips, engines

Ateliers et Chantiers de la Loire (ACL) was a French shipbuilding company of the late 19th and early 20th century. The name translates roughly to English as "Workshops and Shipyard of the Loire".

Contents

Early years

In the eighteenth century Nantes had been the biggest French port, and the Loire had a major shipbuilding industry. A prime example was Dubigeon established in 1760. In the nineteenth century Nantes was surpassed by Le Havre and Marseille. In the first half of the nineteenth century a port was developed at Saint-Nazaire for ships that could no longer reach Nantes. In the second half of the nineteenth century industrialization got under way in Nantes and Saint-Nazaire. In 1861 a Scottish engineer founded the Chantiers de Penhoët at Saint-Nazaire.

Ateliers et Chantiers de la Loire (ACL) was formed in 1881 in Nantes by Jollet Babin to take advantage of the expansion of the French Navy. The shipyard was built at Prairie du Lac, near the Dubigeon yard, and the following year, in 1882, a second yard was built at St Nazaire adjacent to the Chantiers de Penhoët yard. From the outset ACL focused on building warships for the French Navy, laying down capital ships at the Saint-Nazaire site, closer to deep water, and medium–sized and small ships (cruisers, torpedo boats and, later, destroyers) at Nantes.

The battleship race to World War I

The engine and boiler factory at Saint-Denis Saint-Denis.Canal Saint-Denis.Chantier de la Loire.jpg
The engine and boiler factory at Saint-Denis

In September 1892 ACL Saint-Nazaire laid down its first battleship, Masséna . It seemed that the plan to get involved in construction for the French navy had succeeded, but ACL would not lay down another battleship for ten years.

In 1901 ACL took over Normandy-Laporte at Rouen and built a factory for marine boilers and marine steam engines at Saint-Denis near Paris. It was located at the confluence of the Seine and the Canal Saint-Denis, and could easily be reached by boat and by train. This might have helped to get back into the construction of battleships. Indeed, the ambition to become a leading French builder of battleships started to succeed only a few years later.

In November 1902 the Liberté was laid down in Saint-Nazaire. In 1907 ACL at Saint-Nazaire laid down two of the six Danton-class battleships, Condorcet and Diderot. In 1911 it laid down one of the Courbet-class battleships, and in 1912 one of the three Bretagne-class battleships. A fourth Bretagne-class battleship was laid down for Greece in July 1914, but Vasilefs Konstantinos would never be finished. In between a ship of the Normandie-class had been laid down in April 1913.

World War I

Normandie under construction Normandie under construction.png
Normandie under construction

During the war battleship construction was not a priority, and so many parts of the unfinished ships were used for other ships. As a consequence the last two battleships that had been laid down at ACL were far from complete at the end of the war. By then their design was also a bit outdated, and it was decided not to finish the ships.

Interwar years

Shift to building merchant ships

Already before World War I ACL had started to build ocean liners. In March 1914 it had launched the ocean liner Sphinx (151 m, 11,375 tons) for Messageries Maritimes. After the War it was clear that there would not be many orders for big warships in the near future. The logical alternative use of the slipways at Saint Nazaire would be to continue and expand the construction ocean liners. In 1921 ACL launched SS Lipari (9,954 tons) for Chargeurs Réunis. In March 1922 ACL launched SS Chantilly (152 m, 10828 tons), in November 1922 her sister SS Compiègne, and in November 1923 the third sister SS Fontainebleau. With the construction of these medium-sized ocean liners the shipyard had successfully diversified into the market for civilian ships. This was all the more important because the Washington Naval Treaty of 1922 made it clear that no more battleships would be built in the near future.

Of course ACL wanted to expand in the construction of bigger ocean liners. In the early 1920s there had been abandoned negotiations for an ocean liner with the Dutch Netherland Line or SMN. In 1923 a new tender was held by the SMN, and ACL offered for such a low price that it got the order for MS Pieter Corneliszoon Hooft, an ocean liner of 14.642 tons (21,000 tons displacement). The offer was made possible by an extremely low exchange rate of the French Franc, which had not yet been translated in increased cost. The order was also important for ACL because it was a Motor Ship, driven by Diesel engines P.C. Hooft would twice catch fire on the yard. ACL faced severe troubles to finish the ship in time, and in July 1926 she sailed to Amsterdam to be finished over there. In 1932 she was lost in a fire.

In 1929 ACL laid down the ocean liner MS Georges Philippar. She was of a size comparable to that of P.C. Hooft, but profited from advances in Diesel engine technology, making her much faster. Georges Philippar was launched in November 1930, and was burned and lost on the return voyage of her first trip in May 1932.

Diversification

Also in the inter-war years ACL diversified into naval aviation, forming an aircraft manufacturing division in 1925 It became Loire Aviation in 1930. The factory in Saint-Denis would employ up to 1,200 people in the 1920s. It built turrets and other armored parts for the Maginot line.

Re-entry in the battleship market

Before World War II, ACL co-operated with Chantiers de Penhoët in building two of France's four battleships, and had contracts for another, and two aircraft carriers, but these were not completed.

Post World War II

After World War II and a decline in shipbuilding, ACL intensified its links with Chantiers de Penhoët, and the two companies merged in 1955 to form Chantiers de l'Atlantique.

Ships

Notes

    Bibliography

    Related Research Articles

    <span class="mw-page-title-main">William Cramp & Sons</span> American shipping company

    William Cramp & Sons Shipbuilding Company of Philadelphia was founded in 1830 by William Cramp, and was the preeminent U.S. iron shipbuilder of the late 19th century.

    <span class="mw-page-title-main">Saint-Nazaire</span> Subprefecture and commune in Pays de la Loire, France

    Saint-Nazaire is a commune in the Loire-Atlantique department in western France, in traditional Brittany.

    SS <i>Europa</i> (1928) German, later French ocean liner in service 1928-1962

    Europa, later Liberté IMO 5607332, was a German ocean liner built for the Norddeutsche Lloyd line (NDL) to work the transatlantic sea route. She and her sister ship, Bremen, were the two most advanced, high-speed steam turbine ocean vessels in their day, with both earning the Blue Riband.

    SS <i>Île de France</i> French ocean liner in service 1927-1959

    Île de France was a French luxury ocean liner that plied the prestigious transatlantic route between Europe and New York from 1927 through 1958. She was built in Saint-Nazaire for the Compagnie Générale Transatlantique, and named after the region around Paris known as "L'Ile de France". Launched in 1926, she commenced her maiden voyage on June 22, 1927, as the first major ocean liner built after World War I, and the first ever to be decorated almost entirely in modern Art Deco style. Though she was neither the largest ship nor the fastest, she was considered the most beautifully decorated built by CGT, becoming the favored ship of the pre-World War II era among the young, wealthy and fashionable elites.

    French battleship <i>Lorraine</i> French battleship

    Lorraine was a battleship of the French Navy built in the 1910s, named in honor of the region of Lorraine in France. She was a member of the Bretagne class, alongside her two sister ships, Bretagne and Provence. Lorraine was laid down in August 1912 at the Chantiers de Penhoët shipyard, launched in September 1913, and commissioned into the fleet in March 1916, after the outbreak of World War I. She was armed with a main battery of ten 340 mm (13 in) guns and had a top speed of 20 knots.

    <span class="mw-page-title-main">Chantiers de l'Atlantique</span> French shipyard

    Chantiers de l'Atlantique is a shipyard in Saint-Nazaire, France. It is one of the world's largest shipyards, constructing a wide range of commercial, naval, and passenger ships. It is located near Nantes, at the mouth of the Loire river and the deep waters of the Atlantic, which make the sailing of large ships in and out of the shipyards easy.

    Stabilimento Tecnico Triestino (STT) ("Technical Establishment of Trieste") was a private shipbuilding company based in Trieste from the mid-19th to early 20th century, and the most important naval shipbuilding firm of the Austro-Hungarian Empire.

    SS Champlain was a cabin class ocean liner built in 1932 for the French Line by Chantiers et Ateliers de Saint-Nazaire, Penhoët. She was sunk by a mine off La Pallice, France, in 1940—one of the earliest passenger ship losses of the Second World War.

    MS <i>Aramis</i> Ocean liner that became a French armed merchant cruiser and Japanese troop ship

    MS Aramis was a Messageries Maritimes ocean liner that was launched in France in 1931. She was a sister ship of Félix Roussel and Georges Philippar. The three sisters were highly unusual in having square funnels. Aramis' interior was an Art Deco interpretation of Minoan design.

    SS <i>Paris</i> (1916) French ocean liner in service 1916-1939

    SS Paris was a French ocean liner built for the Compagnie Générale Transatlantique by Chantiers de l'Atlantique in Saint-Nazaire, France. Although Paris was laid down in 1913, her launching was delayed until 1916, and she was not completed until 1921, due to World War I. When Paris was finally completed, she was the largest liner under the French flag, at 34,569 tons. Although not so large as the Olympic-class or the Imperator-class and not intended to challenge the speed record of the Mauretania, the Paris, operated by the Cie Generale Transatlantique, was one of the finest liners put into service, at the time. She was 768 feet long, 86 feet beam and 60 feet deep. On 31 feet draught, she displaced 36,700 metric tons

    French battleship <i>Diderot</i> Danton-class semi-dreadnought battleships built for the French Navy in the early 1900s

    Diderot was one of the six Danton-class semi-dreadnought battleships built for the French Navy in the early 1900s. Shortly after World War I began, the ship participated in the Battle of Antivari in the Adriatic Sea and helped to sink an Austro-Hungarian protected cruiser. She spent most of the rest of the war blockading the Straits of Otranto and the Dardanelles to prevent German, Austro-Hungarian and Turkish warships from breaking out into the Mediterranean. Diderot briefly participated in the occupation of Constantinople after the end of the war. She was modernized in 1922–1925 and subsequently became a training ship. The ship was condemned in 1936 and later sold for scrap.

    French battleship <i>Condorcet</i> French Danton-class semi-dreadnought

    Condorcet was one of the six Danton-class semi-dreadnought battleships built for the French Navy in the early 1900s. When World War I began in August 1914, she unsuccessfully searched for the German battlecruiser SMS Goeben and the light cruiser SMS Breslau in the Western and Central Mediterranean. Later that month, the ship participated in the Battle of Antivari in the Adriatic Sea and helped to sink an Austro-Hungarian protected cruiser. Condorcet spent most of the rest of the war blockading the Straits of Otranto and the Dardanelles to keep German, Austro-Hungarian and Turkish warships bottled up.

    SS <i>La Touraine</i>

    SS La Touraine was an ocean liner that sailed for the Compagnie Générale Transatlantique from the 1890s to the 1920s. Built in France in 1891, she was primarily employed in transatlantic service on the North Atlantic. The liner was scrapped in Dunkirk in October 1923.

    <span class="mw-page-title-main">Louis Joubert Lock</span> Dry dock and lock in the port of Saint-Nazaire, Loire-Atlantique, France

    The Louis Joubert Lock, also known as the Normandie Dock, is a lock and major dry dock located in the port of Saint-Nazaire in Loire-Atlantique, northwestern France.

    <span class="mw-page-title-main">Loire Aviation</span> French aircraft manufacturer

    Loire Aviation was a French aircraft manufacturer in the inter-war period, specializing in seaplanes, and based in Saint-Nazaire, France.

    MS <i>Pieter Corneliszoon Hooft</i>

    Pieter Corneliszoon Hooft was a Dutch ocean liner built in 1925. An onboard fire destroyed her passenger accommodation before she was completed. In 1932, another fire damaged her so severely that she was sold for scrapping, only to catch fire again before she was scrapped.

    <i>Élan</i>-class sloop

    The Élan class was a class of French minesweeping sloops. Originally designed as minesweepers, they were never used in that role, instead being used mostly as escort vessels. Built between 1936 and 1940, the first came into service just before the outbreak of World War II.

    <i>Haudaudine</i>

    Haudaudine was a French full-rigged ship owned by Société Anonyme des Armateurs Nantais. Built by Chantiers de Penhoët in Saint-Nazaire in 1902 and named after Pierre Haudaudine, she ran aground off New Caledonia on 3 January 1905 and sank shortly after the crew had abandoned the ship.

    Le Hardi was the lead ship of her class of destroyers built for the Marine Nationale during the late 1930s. The ship was completed during the Battle of France in mid-1940 and her first mission was to help escort an incomplete battleship to French Morocco only days before the French signed an armistice with the Germans. She played a minor role in the Battle of Dakar in September, mostly laying smoke screens. Le Hardi helped to escort one of the battleships damaged by the British during their July attack on Mers-el-Kébir, French Algeria, back to France in November. She was reduced to reserve in mid-1942.

    Mameluk was one of a dozen Le Hardi-class destroyers built for the French Navy during the late 1930s. The ship was completed during the Battle of France in mid-1940 and her first mission was to help escort an incomplete battleship to French Morocco only days before the French signed an armistice with the Germans in June. She then helped to escort one of the battleships damaged by the British during their July attack on Mers-el-Kébir, French Algeria, back to France in November. Mameluk returned to Morocco in early 1941 for convoy-escort duties and then was transferred back to France in late 1941.