C6 Atlantic | |
---|---|
Role | Four-seat cabin monoplane |
National origin | United Kingdom |
Manufacturer | Auster Aircraft Limited |
First flight | 1957 |
Number built | 1 |
Developed from | Auster J/5T |
The Auster C6 Atlantic was a British four-seat cabin monoplane designed and built by Auster Aircraft Limited. Development of the type was abandoned after initial flight tests.
The C6 Atlantic was designed as a high-wing monoplane, four-seat executive tourer, [1] powered by a 185 hp (138 kW) Continental E-185-10 piston engine and based on the Auster J/5T with a tricycle landing gear and other modern items such as control wheels. [1] [2] [3] One aircraft was built which, as a fitted out fuselage registered G-APHT, [4] was statically displayed at the 1957 SBAC Show at Farnborough. [1] Subsequently a pair of Autocrat wings were fitted and early flight tests were encouraging. [5] However, these flights were curtailed by a nose leg collapse due to an inferior nosewheel strut which had been fitted only for the static display and not replaced with the correct item before the first flight. [2]
Although the airframe was repaired and modified, the directors considered the future of the Atlantic at length. An estimate was prepared of the projected development costs and this totalled in excess of £100,000, so that the break-even point required the sale of 300 aircraft. Since maximum sales were envisaged as probably 100 at the most, and with no outside financial help, development was reluctantly abandoned. [5] The sole aircraft was stored until being brought out of storage in 1960 for comparison with the proposed Auster D.8; since production of the C.6 would have required the manufacture of new jigs, [6] the D.8 was pursued instead, ultimately becoming the Beagle Airedale.
Data from [1]
General characteristics
Performance
Auster Aircraft Limited was a British aircraft manufacturer from 1938 to 1961.
Beagle Aircraft Limited was a British light aircraft manufacturer. The company produced the Airedale, Terrier, Beagle 206, Husky and the Pup. It had factories at Rearsby in Leicestershire and Shoreham in Sussex. The company was dissolved in 1969.
The Curtiss Robin, introduced in 1928, was a high-wing monoplane built by the Curtiss-Robertson Airplane Manufacturing Company. The J-1 version was flown by Wrongway Corrigan who crossed the Atlantic after being refused permission.
The Beagle A.61 Terrier is a British single-engined monoplane built by Beagle Aircraft.
The Beagle B.206 is a 1960s British seven-seat twin-piston engined liaison and communication aircraft built by Beagle Aircraft Limited at Shoreham Airport and Rearsby Aerodrome.
The Beagle B.121 Pup is a 1960s British 2–4 seat single-engined training and touring aircraft built by Beagle Aircraft Limited at Shoreham Airport and Rearsby Aerodrome.
The Auster J/1 Autocrat was a 1940s British single-engined three-seat high-wing touring monoplane built by Auster Aircraft Limited at Rearsby, Leicestershire.
The Auster J/2 Arrow is a 1940s British single-engined two-seat high-wing touring monoplane built by Auster Aircraft Limited at Rearsby, Leicestershire, England.
The Auster J/5 Autocar was a late 1940s British single-engined four-seat high-wing touring monoplane built by Auster Aircraft Limited at Rearsby, Leicestershire.
The Auster J/5 Aiglet Trainer was a 1950s British single-engined four-seat high-wing training and touring monoplane built by Auster Aircraft Limited at Rearsby, Leicestershire.
The Auster AOP.9 was a British military air observation aircraft produced by Auster Aircraft Limited to replace the Auster AOP.6.
The Auster D.4 was a two-seat British light aircraft, a development of the Auster Arrow with a horizontally opposed Lycoming engine, which originated from a Portuguese Air Force requirement for a liaison/training aircraft. Six were built by Auster Aircraft at their Rearsby, Leicestershire, factory, of which five went to Portugal, and nine more were built under licence in Portugal by the Oficinas Gerais de Matereal Aeronautico OGMA from sets of components built by Auster and shipped from Rearsby. The original contract was for 25 sets of components but this was reduced in favour of the same number of additional Auster D5/160 sets.
The Beagle Husky was a three-seat British light aircraft built in the 1960s which originated from a Portuguese Air Force requirement for a liaison/training aircraft, a development of the Auster Alpha. It first flew as an Auster design in January 1960, but that company was taken over by Beagle Aircraft in September that year. It was initially available with a 160 hp Lycoming O-320 engine as the Auster D5/160.
The Auster D.6 was a four-seat British light aircraft, a development of the Auster Autocar with a horizontally opposed engine. It was available with a choice of two engines, a 160 hp Lycoming O-320 or 180 hp Lycoming O-360. When Auster was taken over by Beagle Aircraft in September 1960, development of the D.6 was dropped, while the D.4 and D.5 continued in limited production. Only four D.6 aircraft were completed, one D.6/160 and three as D.6/180. A fifth airframe was never completed and was later stored at Carr Farm, Newark (2003).
The Beagle A.109 Airedale is a British light civil aircraft developed in the 1960s.
The Auster J/1B Aiglet is a British light civil utility aircraft developed in the 1950s.
The Auster J/5 Adventurer is a British-built three-seat light high-wing monoplane of the late 1940s.
The Auster 6A Tugmaster was a British high-wing monoplane glider tug converted from surplus former military Auster AOP.6s.
The Auster J series was a family of British light civil utility aircraft developed in the 1940s and 50s by Auster at Rearsby, Leicestershire.
The Beagle B.218X was a 1960s British four-seat twin-engined light transport monoplane built by Beagle Aircraft Limited at Shoreham Airport. The prototype was modified into the Beagle B.242X but neither variant entered production.
{{cite web}}
: CS1 maint: archived copy as title (link) UK Civil Aviation Authority record for G-APHT