Barry Hill Palmer

Last updated
Barry Hill Palmer
Born (1937-11-10) November 10, 1937 (age 86)
NationalityAmerican
OccupationAeronautical engineer
Known forInvention of the Rogallo wing hang glider and the ultralight trike aircraft.

Barry Hill Palmer (born November 10, 1937) is an American aeronautical engineer (UC Berkeley, 1961), inventor, builder and pilot of the first hang glider based on the Rogallo wing or flexible wing. Palmer also designed, built and flew the first weight-shift ultralight trike aircraft.

Contents

Inventor of the first Flexible Wing hang glider

In August 1961 Barry Palmer first saw a photo of the Rogallo wing mounted on the Fleep experimental aircraft published in the Aviation Week magazine and became interested in this flexible wing because of its light weight and simplicity. [1] In October 1961 he completed construction and flew the first flexible wing hang glider; this took place near Latrobe, east of Sacramento, California. [2] He used polyethylene sheet, aluminum tubing and no wires for construction as he did fear kinking during assembly and transport. Most flights were performed with just a set of inclined parallel bars that split his weight between his underarms and hands to experiment with the center of gravity and thus he demonstrated that the Rogallo wing, when used as a hang glider, could also be controlled by shifting weight alone. Palmer, who built the first modern-age foot launched hang glider, is not yet mentioned by the FAI.

Richard Miller flying his new Bamboo Butterfly hang glider. Vista Del Mar California, 1966. Richard Miller.jpeg
Richard Miller flying his new Bamboo Butterfly hang glider. Vista Del Mar California, 1966.

Palmer experimented with about 8 different hang glider versions and their wings were mostly 90 degree swept back wings. His smallest glider weighed 24 lb (11 kg), and had a surface area of 205 sq ft (19.0 m2). The flexibility in the frame caused no performance problems. His first and largest hang glider was about 45 pounds and had a surface area of 342 sq ft (31.8 m2). Palmer explored control of his several versions of hang gliders by using different control frames: pilot in front of the control frame, pilot behind the control frame, and control frame in front of the pilot in a swing seat, which inadvertently approximated the George A. Spratt mechanism from 1929. NASA’s Paresev glider came to light after Palmer’s gliding flights, so it bore no influence on him.

During the period from 1961 to 1963 Barry Palmer made tens of flights using the Rogallo wing concept. His flights were usually 110 metres (120 yards) long and his longest flight was about 180 metres (590 feet). He flew at altitudes up to 24 metres (79 feet). His best glider had an overall glide ratio of 4.5 to 1 at the speed of 29–32 km/h (18–20 miles/h). The last of Palmer’s hang gliders flew in the summer of 1963 and it had a single point suspension ski-lift type of seat mounted to the keel with a universal joint; the seat could be forced fore and aft, and laterally, but allowed for no twisting of the seat relative to the wing due to lateral stick movement. That is why a single control stick could be used to replace the control frame.

Palmer relates that he had a good paying aerospace job at the time and he was flying on a minimalist and inexpensive glider purely for curiosity and fun. He did not attempt to modernize or market the flexible wing hang glider; there was no attempt to publicize on the media, except for an 'accidental' report made by a small local newspaper. [3] In fact, Palmer concealed his efforts to the American aviation bureaucracy (FAA) of flying without credentials in a pre-ultralight era, but freely gave information about the wing to any person interested, including Francis Rogallo [4] [5] and Richard Miller, who develop the famous Bamboo Butterfly Rogallo wing hang glider, the plans of which circulated in some American magazines in the mid 1960s; Tara Kiceniuk's followed with plans for the bamboo Batso Rogallo wing.

Inventor of the ultralight trike aircraft

In March 1967 Palmer built and flew the first true weight-shift powered ultralight trike aircraft: the Paraplane (FAA Registered N7144) [6] and it was controlled by a single vertical control bar. The Paraplane used two West Bend-Chrysler 820 engines (8 hp at 6000 rpm, reduced to 4700 rpm for about 6.5 hp (4.8 kW) each, for a total of 13 hp). Each engine had a direct drive to a 27in diameter two-blade propeller made of polyester & fiberglass. On March 24, 1967 Palmer registered the trike at the American FAA as the Palmer Parawing D-6, serial 1A, N7144; No restrictions were noted.

The second Palmer trike, the Skyhook (FAA registered N4411) in spite of its early date of origin, had most of the attributes of a modern ultralight trike, except it used a single cylinder snowmobile engine, as the two-stroke twin cylinders were not available yet. It was powered by a 17 hp (13 kW) at 5000 rpm single cylinder JLO L297 two stroke engine, driving a composite propeller designed and built by Palmer himself and driven by a 2.1/1 reduction gearbox. The engine had electric start and the craft had fiberglass composite spring landing gear. The airframe consisted of bolted 6061-T6 aluminum tube, with 6061 T-6 extruded angle. The craft took off, flew, and landed at about 30 mph (48 km/h). [7] Palmer’s trikes were not developed further and remained in obscurity. Rolland Magallon from France is sometimes thought to have invented the ultralight trike aircraft because it was Magallon who first marketed it from October 1979 through 1981. Palmer moved on to design a successful line of personal hovercraft. [8]

See also

Related Research Articles

<span class="mw-page-title-main">Hang gliding</span> Unpowered glider air sport

Hang gliding is an air sport or recreational activity in which a pilot flies a light, non-motorised, heavier-than-air aircraft called a hang glider. Most modern hang gliders are made of an aluminium alloy or composite frame covered with synthetic sailcloth to form a wing. Typically the pilot is in a harness suspended from the airframe, and controls the aircraft by shifting body weight in opposition to a control frame.

<span class="mw-page-title-main">Ultralight aviation</span> Aviation field involving lightweight aircraft

Ultralight aviation is the flying of lightweight, 1- or 2-seat fixed-wing aircraft. Some countries differentiate between weight-shift control and conventional three-axis control aircraft with ailerons, elevator and rudder, calling the former "microlight" and the latter "ultralight".

<span class="mw-page-title-main">Rogallo wing</span>

The Rogallo wing is a flexible type of wing. In 1948, Francis Rogallo, a NASA engineer, and his wife Gertrude Rogallo, invented a self-inflating flexible wing they called the Parawing, also known after them as the "Rogallo Wing" and flexible wing. NASA considered Rogallo's flexible wing as an alternative recovery system for the Mercury and Gemini space capsules, and for possible use in other spacecraft landings, but the idea was dropped from Gemini in 1964 in favor of conventional parachutes.

<span class="mw-page-title-main">Francis Rogallo</span> American aeronautical engineer

Francis Melvin Rogallo was an American aeronautical engineer inventor born in Sanger, California, U.S. Together with his wife, he is credited with the invention of the Rogallo wing, or "flexible wing", a precursor to the modern hang glider and paraglider. His patents were ranged over mechanical utility patents and ornamental design patents for wing controls, airfoils, target kite, flexible wing, and advanced configurations for flexible wing vehicles.

Kite types, kite mooring, and kite applications result in a variety of kite control systems. Contemporary manufacturers, kite athletes, kite pilots, scientists, and engineers are expanding the possibilities.

<span class="mw-page-title-main">Powered parachute</span> Parachute with motor and wheels

A powered parachute, often abbreviated PPC, and also called a motorized parachute or paraplane, is a type of aircraft that consists of a parafoil with a motor and wheels.

Taras Kiceniuk Jr. is a hang glider pioneer from southern California.

<span class="mw-page-title-main">Eipper Quicksilver</span> American ultralight aircraft

Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.

<span class="mw-page-title-main">Ultralight trike</span> Powered hang glider

An ultralight trike or paratrike is a type of powered hang glider where flight control is by weight-shift. These aircraft have a fabric flex-wing from which is suspended a tricycle fuselage pod driven by a pusher propeller. The pod accommodates either a solo pilot, or a pilot and a single passenger. Trikes grant affordable, accessible, and exciting flying, and have been popular since the 1980s.

<span class="mw-page-title-main">History of hang gliding</span>

Hang gliding is an air sport employing a foot-launchable aircraft. Typically, a modern hang glider is constructed of an aluminium alloy or composite-framed fabric wing. The pilot is ensconced in a harness suspended from the airframe, and exercises control by shifting body weight in opposition to a control frame.

<span class="mw-page-title-main">NASA Paresev</span> Experimental NASA glider using the Rogallo airfoil

The NASA Paresev was an experimental NASA glider aircraft based upon the kite-parachute studies by NASA engineer Francis Rogallo.

<span class="mw-page-title-main">Powered hang glider</span> Foot-launched powered hang glider

A foot-launched powered hang glider (FLPHG), also called powered harness, nanolight, or hangmotor, is a powered hang glider harness with a motor and propeller often in pusher configuration, although some can be found in tractor configuration. An ordinary hang glider is used for its wing and control frame, and the pilot can foot-launch from a hill or from flat ground, needing a length of about a football field to get airborne, or much less if there is an oncoming breeze and no obstacles.

<span class="mw-page-title-main">Ryan XV-8</span> American experimental STOL aircraft

The Ryan XV-8 Flexible Wing Aerial Utility Vehicle was an improved version of the Flex-Wing. Both aircraft were built by Ryan Aeronautical Company in collaboration with NASA for the United States Air Force and the United States Army and tested in 1961 as a STOL patrol, reconnaissance, and light utility aircraft to transport people or freight when a more specialized aircraft is not required or available.

<span class="mw-page-title-main">Glider (aircraft)</span> Aircraft designed for operation without an engine

A glider is a fixed-wing aircraft that is supported in flight by the dynamic reaction of the air against its lifting surfaces, and whose free flight does not depend on an engine. Most gliders do not have an engine, although motor-gliders have small engines for extending their flight when necessary by sustaining the altitude with some being powerful enough to take off by self-launch.

<span class="mw-page-title-main">John W. Dickenson</span> Australian inventor (1934–2023)

John Wallace Dickenson was an Australian inventor, who developed some liquid flow measuring devices and designed a successful hang glider configuration, for which he was awarded the Gold Air Medal, the highest award given by the Fédération Aéronautique Internationale, the world governing body for air sports, aeronautics and astronautics world records.

Charles Richard was a design engineer, who designed the collapsible four-tube Rogallo wing used in the experimental NASA Paresev glider. The wing configuration he created was used for manned hung-pilot kite-gliders and was to be found copied only with slight ornamental variation in a decade of hang gliders. Richards was of the Flight Research Center's Vehicle and System Dynamics Branch. The four-beamed wing folded from the nose plate; one of the beams was the spreader beam that kept the flexible-wing's sweep. Those in the following decade copying the Charles Richard wing configuration expanded kiting, hang gliding, ultralight, and trike flight.

The LiteWing Aircraft LiteWing, also called the Lite Wing Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied as a kit for amateur construction.

The Lookout Mountain SkyCycle, also marketed as The Freedom Machine, is an American ultralight trike that was designed by Matt Taber, produced by Lookout Mountain Flight Park of Rising Fawn, Georgia and introduced in 1997. The aircraft was supplied as a kit for amateur construction and also as plans.

The Spartan DFS Trike is an American ultralight aircraft designed and produced by Spartan Microlights. The aircraft was the first ultralight introduced that could be flown with a hang glider-style wing as an ultralight trike or with a powered parachute wing.

The Purcell Flightsail or Flight Dynamics Flightsail is an experimental towed glider by Thomas H. Purcell, Jr. He sold plans in several publications for the tow-launched hung-mass controllable kite-glider. He flew first off water in late 1961 and then arranged things for off-land and landing on land. His efforts would find similarity echo later in early 1963 by the SkiPlane of Mike Burns.

References

  1. ↑ August 14, 1961 by Aviation Week & Space Technology magazine.
  2. ↑ His first hang glider cost him only $10.89 USD. Article by Barry H. Palmer published in February 1969 by Sport Aviation magazine. Barry Palmer’s web site, dated photos:.
  3. ↑ San Juan Record newspaper, published out of Fair Oaks, California. Thursday March 15th, 1962. Scan:
  4. ↑ Interview with Gerard Farell on 1/23/2007 – 1/24/2007.
  5. ↑ Letter from Francis Rogallo to Barry Palmer (October4/1962)
  6. ↑ Palmer’s trike: Archived October 24, 2007, at the Wayback Machine
  7. ↑ Barry H. Palmer’s web site
  8. ↑ Sevtec hovercraft Waybackmachine version
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.