A turboprop engine is a turbine engine that drives an aircraft propeller.
An autogyro, also known as a gyroplane or gyrocopter, is a type of rotorcraft that uses an unpowered rotor in free autorotation to develop lift. Forward thrust is provided independently, by an engine-driven propeller. While similar to a helicopter rotor in appearance, the autogyro's rotor must have air flowing across the rotor disc to generate rotation, and the air flows upwards through the rotor disc rather than down.
B3, B03, B.III or B-3 may refer to:
B2, B02, B.II, B.2 or B-2 may refer to:
The Bensen B-8 is a small, single-seat autogyro developed in the United States in the 1950s. Although the original manufacturer stopped production in 1987, plans for homebuilders are still available as of 2019. Its design was a refinement of the Bensen B-7, and like that aircraft, the B-8 was initially built as an unpowered rotor-kite. It first flew in this form in 1955, and on 6 December a powered version, designated B-8M first flew. The design proved to be extremely popular and long-lasting, with thousands of sets of plans sold over the next thirty years.
B4, B04, B.IV or B-4 may refer to:
B11, B XI or B-11 may refer to:
A rotor kite or gyrokite is an unpowered, rotary-wing aircraft. Like an autogyro or helicopter, it relies on lift created by one or more sets of rotors in order to fly. Unlike a helicopter, gyrokites and rotor kites do not have an engine powering their rotors, but while an autogyro has an engine providing forward thrust that keeps the rotor turning, a rotor kite has no engine at all, and relies on either being carried aloft and dropped from another aircraft, or by being towed into the air behind a car or boat or by use of ambient winds for the kiting. As of 2009, no country in the world requires a license to pilot such a craft.
The Bensen B-6 was a small rotor kite developed by Igor Bensen in the United States in the early 1950s and marketed for home building. It was a minimalist design based on Bensen's B-5 and consisting of little more than a seat mounted on wooden skids and with a two-blade rotor mounted on a tubular framework above it. Small fins for directional stability were mounted at the rear of the skids. The pitch of the rotors was fixed, but a handlebar allowed them to be tilted for directional control.
The Bensen B-7 was a small rotor kite developed by Igor Bensen in the United States in the 1950s and marketed for home building. It was a refined to be a slightly larger version of the B-6, replacing the skids with a tricycle undercarriage, and adding a single large fin to the rear of the aircraft.
The Bensen Mid-Jet was a small helicopter developed by Igor Bensen in the United States in the early 1950s in the hope of attracting the interest of the United States Navy. It was a single-seat, open framework machine based on the B-5 rotor kite with small, gasoline- or fuel oil-burning ramjets mounted as tipjets on the rotor blades. Tests carried out in 1954 showed it to be able to lift four times its own weight and cruise at 75 mph (120 km/h).
Igor Vasilevich Bensen was a Russian-American engineer. He founded Bensen Aircraft, a US company which produced a successful line of gyrogliders and autogyros.
The Bensen B-5 was a small rotor kite developed by Igor Bensen in the United States and offered and marketed for home building in 1954. Dubbed the "Gyro-Glider", it was the first of several such designs that would be sold by Bensen Aircraft Corporation over the following decades.
The Bensen B-9 Little Zipster was a small helicopter developed by Igor Bensen in the United States in the 1950s and marketed for home building. Similar in general configuration to Bensen's previous rotor kite and autogyro designs, it consisted of an open aluminum framework but substituted the autorotating main rotor for a coaxial, counter-rotating system of two, two-bladed rotors. A large tailfin provided directional stability, and the aircraft was controlled by a handlebar system extending over the pilot's head to the rotor hub.
The Bensen B-10 Propcopter was an unconventional VTOL aircraft developed by Igor Bensen in the United States in the late 1950s. The pilot sat astride a beam that had an engine mounted at either end of it, each driving a rotor to provide lift. Each of these rotors was surrounded by a system of four pivotable vanes to direct its downwash, and linked to a control stick for the pilot, this provided control of the craft. Only a single prototype was built.
The Bensen B-12, variously dubbed the Sky-Way or Sky-Mat was an unconventional multirotor developed by Igor Bensen in the United States in the late 1950s. Extremely unorthodox, the design sprang from Bensen's thinking about the engine redundancy necessary to ensure the safe operation of small, personal rotorcraft operating at low altitudes and slow speeds. The result was a broad aluminum framework supporting an array of ten engines and rotors that Bensen likened to a "magic carpet". The design was later refined to include eight rotors, each driven by two engines for a total of sixteen.
The Rotor Flight Dynamics LFINO is an American experimental autogyro that was designed by Ernie Boyette and Dick DeGraw, with a single prototype produced by their company Rotor Flight Dynamics of Wimauma, Florida. The aircraft was intended as a proof-of-concept for evaluation for police or paramilitary use.
