Beretta Bobcat 21A | |
---|---|
Type | Semi-automatic pistol |
Place of origin | Italy United States |
Production history | |
Manufacturer | Beretta |
Produced | 1984 [1] –present |
Specifications | |
Mass |
|
Length | 125 mm (4.9 in) [2] |
Barrel length | 61 mm (2.4 in) [2] |
Width | 28 mm (1.1 in) |
Cartridge | |
Action | semi-auto blowback |
Feed system | 7 or 8 round detachable magazine [2] |
Sights | Fixed open sights |
The Beretta 21A Bobcat is a semi-automatic pocket pistol designed by Beretta in Italy. Production began in the late 1984, solely in the Beretta U.S.A. facility in Accokeek, Maryland. It is a further development of the Beretta Model 20, whose production ended in 1985. [1]
The Beretta 21A Bobcat is available chambered for either .22 LR or .25 ACP (6.35 mm) ammunition. It has a simple blowback operation, with a single- and double-action trigger mechanism, and exposed hammer. It has a magazine release button in the left side grip, located between the grip retaining screws. The frame is made out of aluminum alloy; the slide and barrel are either carbon steel or stainless steel, depending on the model. [3] According to Beretta, the pistol is intended for off duty police and pistol carry permit holders that seek a highly concealable, but reliable pistol designed for self-defense. [2]
The Beretta 21a chambered in .22 LR or .25 ACP is a pistol that’s intended for undercover agents, as backup for police officers, for individuals licensed to carry a concealed firearm or just for plinking and/or sport shooting.
It is fitted with a frame-mounted, thumb-operated rear-locking safety, which also blocks the slide. This can be applied with the hammer fully down, or cocked. The hammer has a half-cock safety notch. There is an inertia type firing pin design. [4]
One defining feature of this pistol is the 'tip-up' barrel. The barrel pivots on a pin under the muzzle so that the chamber may be loaded with the slide in the closed position. It is released by a lever on the left side of the frame, above the trigger. This simplifies loading, unloading, and checking load status, as the slide can be difficult for some people to retract by hand. [5]
The Bobcat was designed without an extractor, relying on pressure from the expanding gases of the fired cartridge to simply blow spent cases from the chamber. This makes it particularly sensitive to choice of ammunition for dependable operation. [6]
The weapon design creates a unique ejection path. Instead of ejecting spent brass to the side as do most semi-automatic hand guns, the Bobcat ejects the spent brass backwards and up.
The Bobcat 21A is available in either .22 LR with 7-round magazine capacity or .25 ACP (6.35 mm) with 8-round magazine capacity. The .22 LR version is currently available in either matte black (Beretta's "Bruniton" finish) or stainless steel ("Inox") versions. The .25 ACP model is available in black only. [2]
In the .22 LR "Inox" version (introduced in 2000 [1] ) only the barrel and slide are stainless steel, and the alloy frame has a matte light gray Bruniton coating. The remainder of the gun is unchanged. [2]
The Beretta 92 is a series of semi-automatic pistols designed and manufactured by Beretta of Italy. The Beretta 92 was designed in 1975, and production began in 1976. Many variants in several calibers continue to be used to the present.
The Beretta 92G-SD and 96G-SD Special Duty handguns are semi-automatic, locked-breech delayed recoil-operated, double/single-action pistols, fitted with the heavy, wide Brigadier slide, chambered for the 9×19mm Parabellum cartridge (92G-SD) and the .40 S&W cartridge (96G-SD), framed with the addition of the tactical equipment rail, designed and manufactured by Beretta.
The Beretta Cheetah, also known by its original model name of "Series 81", or "80 Series", is a line of compact blowback operated semi-automatic pistols designed and manufactured by Beretta of Italy. They were introduced in 1976 and include models in .32 ACP, .380 ACP and .22 LR. Production paused in 2017, but Beretta revived the marque in 2023 with the release of the 80X.
The Beretta 950 is a semi-automatic pistol designed and manufactured by Beretta since 1952. It builds on a long line of small and compact pocket pistols manufactured by Beretta for self-defense. It was intended to be a very simple and reliable pocket pistol.
The Beretta 3032 Tomcat and Beretta 3032 Tomcat Inox are semi-automatic pocket pistols designed and manufactured by Beretta. They are chambered in .32 ACP and are small pistols, designed for concealed-carry and use as backup weapons. The Beretta 3032 Tomcat builds on a long line of small and compact pocket pistols for self defense manufactured by Beretta. The allure and popularity is commonly attributed to the loading procedure, which does not require the user to "rack" the slide to chamber a round, but rather place a round in the tip-up barrel before the magazine is inserted. This is especially popular for those with weaker or smaller hands.
The SIG Sauer P220 is a semi-automatic pistol designed in 1975 by the SIG Arms AG division of Schweizerische Industrie Gesellschaft, and produced by J. P. Sauer & Sohn, in Eckernförde. It is currently manufactured by both SIG Sauer companies: SIG Sauer GMBH, of Eckernförde, Germany; and SIG Sauer, Inc., of New Hampshire, United States.
The Beretta U22 Neos is a .22 Long Rifle semi-automatic, single-action pistol using a slide blow-back system, that has been manufactured in the United States since 2002 by Beretta USA. The pistol will accept interchangeable 4.5, 6 or 7.5 in barrels in blued or stainless steel finishes. Each barrel incorporates a built-in Weaver-style rail to accommodate optics or accessories. Beretta markets the Neos as a modern, reasonably priced pistol suitable for a beginner, yet is customizable to suit the experienced marksman.
The K100 is a 9×19mm semi-automatic pistol designed and built by Grand Power s.r.o. in Slovenská Ľupča, Slovakia located approximately 11 kilometers east of Banská Bystrica, Slovakia which is the region's major city.
The Beretta Px4 Storm is a semi-automatic pistol intended for personal defense and law enforcement use. It is available in full size, Compact, and Subcompact versions. The Px4 uses a trigger and safety system similar to the Beretta 92 and the Beretta 8000 series, though it is distinguished from its predecessors by its light-weight polymer construction with steel inserts, standard Picatinny rail, and swappable grip backstraps. The full size and Compact versions use the same short-recoil, rotating barrel action as the Beretta 8000 series, whereas the Subcompact uses the tilt barrel system.
In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.
The Beretta 8000 (Cougar) is a family of rotating barrel semi-automatic pistols that were designed and manufactured by Beretta of Italy.
The FN FNP pistol is a series of semi-automatic, polymer-framed pistols manufactured in Columbia, South Carolina, by FNH USA, a division of Fabrique Nationale de Herstal. The handgun debuted in early 2006 and is variously chambered for the 9×19mm, .40 S&W, .357 SIG and .45 ACP cartridges.
The Smith & Wesson Model 457 is a compact semi-automatic pistol from Smith & Wesson's Third Generation series of alloy and steel-framed handguns in company's Value Line of budget-priced auto pistols. The 457 is a compact pistol chambered for the .45 ACP cartridge. The design utilizes a double-action/single action trigger mechanism, meaning that the first shot is fired with long double-action pull, with following shots fired in single-action. The 457's external hammer omits a thumb spur, thereby reducing the risk of being caught on clothing during unholstering. A slide-mounted safety lever that drops the hammer from its cocked position when moved to the 'safe' position. The 457 has a 95 mm (3.75 in) barrel and 7-round magazine capacity. The Model 457 was produced with a matte-finish carbon steel slide and blackened aluminum alloy frame. Other versions include the Model 457S with a stainless steel slide and aluminum frame, and the Model 457TDA with a satin-finished aluminum frame and black carbon steel slide.
The Kimber Custom is an M1911 style semi-automatic pistol. It is designed, manufactured, and distributed by Kimber Manufacturing, Inc. in Yonkers, New York.
Llama Firearms, officially known as Llama-Gabilondo y Cia SA, was a Spanish arms company founded in 1904 under the name Gabilondo and Urresti. Its headquarters were in Eibar in the Basque Country, Spain, but they also had workshops during different times in Elgoibar and Vitoria. The company manufactured moderate-priced revolvers and self-chambering pistols in a wide variety of models. These were popular mainly in the European and Latin American export market, as well as domestically in Spain.
The Taurus Millennium series is a product line of double-action only (DAO) and single-action/double-action hammerless, striker-fired, short recoil operated, semi-automatic pistols manufactured by Forjas Taurus S/A in Porto Alegre, Brazil. The Millennium line was designed to contend in the civilian concealed carry firearms market, and to be sold as backup weapons for law enforcement officers.
The PT22 is a .22 LR semi-automatic pistol produced by Taurus and features an 8+1 round capacity magazine.
The FN FNX pistol is a series of semi-automatic, polymer-framed pistols manufactured in Columbia, South Carolina, by FN America, a division of Fabrique Nationale d'Herstal. The pistol is chambered for the 9×19mm Parabellum, .40 S&W, and .45 ACP cartridges. It was introduced in 2009 as the successor to the FN FNP.
The Kahr P series is a product line of double action only (DAO) hammerless, striker-fired, short recoil operated, semi-automatic pistols manufactured by Kahr Arms. The target market for the P line is the civilian concealed carry firearms market, as well as being intended as backup weapons for law enforcement officers.
The Beretta 70 is a magazine-fed, single-action semi-automatic pistol series designed and produced by Beretta of Italy, which replaced the earlier 7.65mm Beretta M1935 pistol. Some pistols in this series were also marketed as the Falcon, New Puma, New Sable, Jaguar, and Cougar. The gun is notable for its appearances in film, and is also the first compact Beretta pistol to feature several improvements commonly found in Beretta pistols for the rest of the century.