Biox

Last updated

Biox is an American medical technology company known for the development of the first widely used pulse oximeter.

Contents

History

Michael Hickey, Scott Wilber, and Bill Moe founded Biox Technology in 1979. Hickey served as the company's CEO, Wilber was the company's Chief Engineer and Scientist, and Moe was the company's Executive Vice President. Enervest, a Denver-based venture fund, funded the company.

Wilber invented the company's technology and developed the first oximeter patent. [1] Wilber's development of a "normalization circuitry" proved to be a significant, long-lasting innovation in pulse oximetry. [2]

Wilber led the company's product development for the Biox II, Biox IIa and Biox III product lines. He led the team of pulse oximeter engineers which later developed the Ohmeda Biox 3700 [3] which was widely used in the anesthesia market in the mid-1980s.

The first commercially available oximeters were produced by Hewlett-Packard, and were large, cumbersome, and expensive. These devices were of limited value because they were largely focused on research in the respiratory care field. Biox introduced the first pulse oximeter to commercial distribution in 1980. [4] Initially, the company focused its marketing on the respiratory care market. [2] Later the company established a national, independent distribution network market of respiratory care physicians.

Unbeknownst to the company, the pulse oximeter was also being used to monitor oxygen deprivation in patients under anesthesia in operating rooms. [5] Reports of this application reached the company's management in late 1982, and the company began to focus time and resources in developing operating room applications to help anesthesiologists monitor oxygenation levels in patients on the operating table.

The company began to experience competition in the anesthesia market from a new entry into the field, Nellcor. In order to enter the anesthesia market and to mitigate competitive pressures, the company retained Kidder Peabody to assist it in developing a strategic alliance with large corporations in the medical field. As a result of this effort, the BOC Group purchased Biox Technology in the summer of 1984. The company became a business unit of BOC's Medical Group, Ohmeda. [5] The product was renamed to Ohmeda Biox 3700. [6]

At the time of acquisition, Hickey, Moe, and Evans stayed on with the company as managers of the business unit; Wilber left the corporation. Under BOC management, the pulse oximeter market expanded significantly. The Ohmeda business unit remains in Boulder, Colorado as a medical device manufacturer. It is currently under the ownership of GE Healthcare.

Related Research Articles

<span class="mw-page-title-main">Pulse oximetry</span> Measurement of blood oxygen saturation

Pulse oximetry is a noninvasive method for monitoring a person's blood oxygen saturation. Peripheral oxygen saturation (SpO2) readings are typically within 2% accuracy of the more accurate reading of arterial oxygen saturation (SaO2) from arterial blood gas analysis. But the two are correlated well enough that the safe, convenient, noninvasive, inexpensive pulse oximetry method is valuable for measuring oxygen saturation in clinical use.

GE HealthCare Technologies, Inc., doing business as GE HealthCare, is an American multinational medical technology company headquartered in Chicago, Illinois. It was spun-off from General Electric on January 4, 2023, with GE retaining 20%. As of 2017, it is a manufacturer and distributor of diagnostic imaging agents and radiopharmaceuticals for imaging modalities used in medical imaging procedures. It offers dyes used in magnetic-resonance-imaging procedures; manufactures medical diagnostic equipment, including CT image machines; MRI, XRAY; Ultrasound; Cath Labs; Mammogram; Nuclear Medicine Cameras; and develops Health technology for medical imaging and information technologies, medical diagnostics, patient monitoring systems, disease research, drug discovery, and biopharmaceutical manufacturing. It was incorporated in 1994 and operates in more than 100 countries.

Sonicaid Ltd was a medical electronics company headquartered in West Sussex best known for its range of Doppler fetal monitors. The company also developed early ultrasound scanners. The word "Sonicaid" is in generic use for Doppler fetal monitors. Sonicaid is now a registered trademark of Huntleigh Healthcare.

<span class="mw-page-title-main">Federal Food, Drug, and Cosmetic Act</span> Acts of the United States Congress

The United States Federal Food, Drug, and Cosmetic Act is a set of laws passed by the United States Congress in 1938 giving authority to the U.S. Food and Drug Administration (FDA) to oversee the safety of food, drugs, medical devices, and cosmetics. The FDA's principal representative with members of congress during its drafting was Charles W. Crawford. A principal author of this law was Royal S. Copeland, a three-term U.S. senator from New York. In 1968, the Electronic Product Radiation Control provisions were added to the FD&C. Also in that year the FDA formed the Drug Efficacy Study Implementation (DESI) to incorporate into FD&C regulations the recommendations from a National Academy of Sciences investigation of effectiveness of previously marketed drugs. The act has been amended many times, most recently to add requirements about bioterrorism preparations.

iBOT Powered wheelchair

The iBOT is a powered wheelchair that uses gyroscopic technology to provide multiple operating modes for varied indoor and outdoor terrain.

Moog is an American-based designer and manufacturer of electric, electro-hydraulic and hydraulic motion, controls and systems for applications in aerospace, defense, industrial and medical devices. The company operates under four segments: aircraft controls, space and defense controls, industrial controls, and components. Moog is headquartered in Elma, New York and has sales, engineering, and manufacturing facilities in twenty-six countries.

<span class="mw-page-title-main">Hill-Rom</span> American medical technology provider

Hill-Rom Holdings, Inc., doing business as Hillrom, is an American medical technology provider that is a subsidiary of Baxter International.

<span class="mw-page-title-main">Masimo</span> American healthcare company

Masimo Corporation is an Irvine, California-based global medical technology company that develops, manufactures, and markets non-invasive patient monitoring technologies, hospital automation solutions, home monitoring devices, ventilation solutions, and consumer products. The company's core measurement technologies are pulse oximetry, alongside advanced Pulse CO-Oximetry measurements, brain function monitoring, regional oximetry, acoustic respiration rate monitoring, capnography, nasal high-flow respiratory support therapy, patient position and activity tracking, and neuromodulation technology for the reduction of symptoms associated with opioid withdrawal.

<span class="mw-page-title-main">Joe Kiani</span> Iranian-born American entrepreneur (born 1964)

Massi Joe E. Kiani is an Iranian-American entrepreneur who founded medical technology company Masimo in 1989.

<span class="mw-page-title-main">Maquet</span> German surgical equipment company

Maquet is a multinational German company based in Rastatt with focus on equipment for surgical workplaces, anesthesia systems, workstations for intensive care and cardiovascular devices. MAQUET does business in three primary divisions - Surgical Workplaces, Critical Care and Cardiovascular. Maquet is one of the three primary business units of Swedish parent Getinge Group.

ICU Medical, Inc. is a San Clemente, California-based company with global operations. ICU Medical products are designed to prevent bloodstream infections and protect healthcare workers from exposure to infectious diseases or hazardous drugs. ICU Medical product line includes intravenous therapy (IV) products, pumps, needle-free vascular access devices, custom infusion sets, closed system hazardous drug handling devices and systems, sensor catheters, needle-free closed blood sampling systems, and hemodynamic monitoring systems.

Avita Medical is a clinical and commercial company developing and marketing a range of respiratory and regenerative products. The first regenerative medicine product brought to the market by Avita Medical was ReCell spray-on skin for the treatment of burns. The two latest products are ReNovaCell, for Aesthetics and Plastic applications including skin trauma, and ReGenerCell for the treatment of chronic wounds. The Avita Medical regenerative product range is currently marketed in Europe, the Middle East, Africa (EMEA) and Australia.

<span class="mw-page-title-main">ADAC Laboratories</span>

ADAC Laboratories was a Silicon Valley medical device company specialising in nuclear medicine gamma camera manufacturing and associated nuclear medicine processing computers and software. It was originally located at 10300 Bubb Road, Cupertino, California, 95014, then as the company expanded moved in turn to the following locations. 4747 Hellyer Avenue, San Jose, CA 951, then 255 San Geronimo Way, Sunnyvale, CA, then from ~1993, 540 Alder Drive Milpitas, CA 95035. Although most people called the company ADAC or adaclabs, the name ADAC was an acronym of Analytical Development Associates Corporation. It was incorporated in California on October 14, 1970.

Radiometer is a Danish multinational company which develops, manufactures and markets solutions for blood sampling, blood gas analysis, transcutaneous monitoring, immunoassay testing and the related IT management systems. The company was founded in 1935 in Copenhagen, Denmark by Børge Aagaard Nielsen and Carl Schrøder. It has over 3,200 employees and direct representation in more than 32 countries. Corporate headquarters remain in Copenhagen.

<span class="mw-page-title-main">Ekso Bionics</span>

Ekso Bionics Holdings Inc. is a company that develops and manufactures powered exoskeleton bionic devices that can be strapped on as wearable robots to enhance the strength, mobility, and endurance of industrial workers and people experiencing paralysis and mobility issues after a brain injury, stroke, multiple sclerosis (MS) or spinal cord injury. They enable individuals with any amount of lower extremity weakness, including those who are paralyzed, to stand up and walk.

Nihon Kohden Corporation is a Tokyo-based leading manufacturer, developer and distributor of medical electronic equipment, which include EEGs, EMG measuring systems, ECGs, patient monitors, Invasive and Non-Invasive Ventilators, Defibrillators, AEDs and clinical information systems, with subsidiaries in the U.S., Europe and Asia. The company's products are now used in more than 120 countries, and it is the largest supplier of EEG products worldwide.

BrainScope Company, Inc. (BrainScope) is a medical neuro-technology firm utilizing EEG technology to assess the full spectrum of mild traumatic brain injury (mTBI), including functional injuries, and structural injuries. BrainScope was founded in 2006 and is headquartered in Bethesda, Maryland.

Due to the many regulations in the industry, the design of medical devices presents significant challenges from both engineering and legal perspectives.

Takuo Aoyagi was a Japanese engineer, known for his work leading to the modern pulse oximeter.

<span class="mw-page-title-main">Integra LifeSciences</span> Device manufacturing company

Integra LifeSciences is a global medical device manufacturing company headquartered in Princeton, New Jersey. Founded in 1989, the company manufactures products for skin regeneration, neurosurgery, reconstructive and general surgery. Integra artificial skin became the first commercially reproducible skin tissue used to treat severe burns and other skin wounds.

References

  1. oximeter patent
  2. 1 2 Gail D. Baura (2012). Medical Device Technologies: A Systems Based Overview Using Engineering Standards. Academic Press. pp. 247–. ISBN   978-0-12-374976-5.
  3. 510(k) Premarket Notification Neocis Guidance System
  4. "510(k) Premarket Notification". www.accessdata.fda.gov. Retrieved 2017-02-23.
  5. 1 2 Edmond I. Eger II; Lawrence Saidman; Rod Westhorpe (14 September 2013). The Wondrous Story of Anesthesia. Springer Science & Business Media. pp. 757–. ISBN   978-1-4614-8441-7.
  6. John G. Webster (23 October 1997). Design of Pulse Oximeters. CRC Press. pp. 196–201. ISBN   978-1-4200-5079-0.