Brewster Color

Last updated

Brewster Color was an early subtractive color-model film process.

Contents

A two color process was invented by Percy Douglas Brewster in 1913, based on the earlier work of William Friese-Greene. [1] It attempted to compensate for previous methods' problems with contrast. [2] Brewster introduced a three color process in 1935, in an unsuccessful attempt to compete with Technicolor. [1]

Two color process

In his first patent application, filed February 11, 1913, American inventor Percy Douglas Brewster described a new color film process:

The exposure is made through a ray filter, preferably light yellow in color and adapted to cut off all the violet and ultra-violet rays of light. The green and blue light with the addition of some yellow, after passing through the ray filter, acts upon the panchromatic emulsion on the front of the film, while the red and orange light with some yellow passes through the film and acts upon the panchromatic emulsion on the back of the film. The color that the transparent emulsion is stained prevents the passage of a substantial amount of blue and green light through the film to act upon the panchromatic film on the back. [3]

Over the next eight years, Brewster filed a series of further patents pertaining to photographic film, [4] film development, [5] [6] color cinematography, [7] [8] [9] [10] and various improvements to the process. [11] [12] In 1917, a patent for a method of "Coloring or Dyeing Photographic Images" was issued to Hoyt Miller, chief chemist of the Brewster Color Film Corporation, and assigned to the corporation. [13] [14] [15]

Use in motion pictures

Brewster's process was used for the first color animated cartoon, 1920's The Debut of Thomas Cat . [16] [17] However the production company, Bray Pictures, deemed the process to be too expensive, and did not employ it again. [18]

As other color processes became available, Brewster Color continued to be preferred by some filmmakers due to its relatively low cost and greater availability for small production runs. It began to fall out of use in the late 1920s, in favor of the Prizma process. [19]

In April 1944, a syndicate was formed to purchase the rights to the Brewster Color process and use it to produce films at studios in New York and Washington, D.C. [20] [21] Stanley Neal, member of the syndicate and owner of its laboratory, was mainly known for the production of industrial films and advertising shorts. [22]

Three color process

In 1935, Brewster introduced a three color process which added yellow tinting. Though demonstration films received praise from members of the Royal Photographic Society for their "remarkable steadiness" and "extraordinarily good reds", this method failed to meet with commercial success. [1] [2]

Brewster v. Technicolor

Brewster filed a lawsuit against Technicolor, Inc. and Technicolor Motion Picture Corporation on April 1, 1941. It sought $100,000 in damages and an injunction, stating that they had infringed on patents for a "method and apparatus for color cinematography." [23] On October 7, 1941, the judge overruled defense objections to some of the plaintiff's interrogatories. This procedural decision has been cited in some subsequent cases, as "2 F.R.D. 186, 51 U.S.P.Q. 319". [24]

No further public filings were made by Brewster, suggesting that the case may have been settled out of court.

See also

Related Research Articles

Film stock Medium used for recording motion pictures

Film stock is an analog medium that is used for recording motion pictures or animation. It is recorded on by a movie camera, developed, edited, and projected onto a screen using a movie projector. It is a strip or sheet of transparent plastic film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast and resolution of the film. The emulsion will gradually darken if left exposed to light, but the process is too slow and incomplete to be of any practical use. Instead, a very short exposure to the image formed by a camera lens is used to produce only a very slight chemical change, proportional to the amount of light absorbed by each crystal. This creates an invisible latent image in the emulsion, which can be chemically developed into a visible photograph. In addition to visible light, all films are sensitive to X-rays and high-energy particles. Most are at least slightly sensitive to invisible ultraviolet (UV) light. Some special-purpose films are sensitive into the infrared (IR) region of the spectrum.

35 mm movie film Motion picture film gauge, the standard

35 mm film is a film gauge used in filmmaking, and the film standard. In motion pictures that record on film, 35 mm is the most commonly used gauge. The name of the gauge is not a direct measurement, and refers to the nominal width of the 35 mm format photographic film, which consists of strips 1.377 ± 0.001 inches (34.976 ± 0.025 mm) wide. The standard image exposure length on 35 mm for movies is four perforations per frame along both edges, which results in 16 frames per foot of film.

The following list comprises significant milestones in the development of photography technology.

Kodachrome Brand name of an Eastman Kodak film

Kodachrome is the brand name for a color reversal film introduced by Eastman Kodak in 1935. It was one of the first successful color materials and was used for both cinematography and still photography. For many years Kodachrome was widely used for professional color photography, especially for images intended for publication in print media. Because of its complex processing requirements, the film was sold process-paid in the United States until 1954, when a legal ruling prohibited that. However, the arrangement continued in other markets.

Color photography is photography that uses media capable of capturing and reproducing colors. By contrast, black-and-white or gray-monochrome photography records only a single channel of luminance (brightness) and uses media capable only of showing shades of gray.

Panchromatic emulsion is a type of black-and-white photographic emulsion that is sensitive to all wavelengths of visible light.

Cinecolor was an early subtractive color-model two-color motion picture process that was based upon the Prizma system of the 1910s and 1920s and the Multicolor system of the late 1920s and the 1930s. It was developed by William T. Crispinel and Alan M. Gundelfinger, and its various formats were in use from 1932 to 1955.

Film tinting is the process of adding color to black-and-white film, usually by means of soaking the film in dye and staining the film emulsion. The effect is that all of the light shining through is filtered, so that what would be white light becomes light of some color.

In chemistry, orthochromasia is the property of a dye or stain to not change color on binding to a target, as opposed to metachromatic stains, which change color. The word is derived from the Greek orthos, and chromatic (color). Toluidine blue is an example of a partially orthochromatic dye, as it stains nucleic acids by its orthochromatic color (blue), but stains mast cell granules in its metachromatic color (red).

A chromogenic print, also known as a C-print or C-type print, a silver halide print, or a dye coupler print, is a photographic print made from a color negative, transparency or digital image, and developed using a chromogenic process. They are composed of three layers of gelatin, each containing an emulsion of silver halide, which is used as a light-sensitive material, and a different dye coupler of subtractive color which together, when developed, form a full-color image.

In cinematography, bipacking, or a bipack, is the process of loading two reels of film into a camera, so that they both pass through the camera gate together. It was used both for in-camera effects and as an early subtractive colour process.

Color motion picture film Photographic film type

Color motion picture film refers both to unexposed color photographic film in a format suitable for use in a motion picture camera, and to finished motion picture film, ready for use in a projector, which bears images in color.

Prizma Color motion picture process

The Prizma Color system was a color motion picture process, invented in 1913 by William Van Doren Kelley and Charles Raleigh. Initially, it was a two-color additive color system, similar to its predecessor, Kinemacolor. However, Kelley eventually transformed Prizma into a bi-pack color system that itself became the predecessor for future color processes such as Multicolor and Cinecolor.

Dufaycolor

Dufaycolor is an early British additive colour photographic film process, introduced for motion picture use in 1932 and for still photography in 1935. It was derived from Louis Dufay's Dioptichrome plates, a glass-based product for colour still photography, introduced in France in 1909. Both Dioptichrome and Dufaycolor worked on the same principles as the Autochrome process, but achieved their results using a layer of tiny colour filter elements arrayed in a regular geometric pattern, unlike Autochrome's random array of coloured starch grains. The manufacture of Dufaycolor film ended in the late 1950s.

Dye transfer is a continuous-tone color photographic printing process. It was used to print Technicolor films, as well as to produce paper colour prints used in advertising, or large transparencies for display.

In bipack color photography for motion pictures, two strips of black-and-white 35 mm film, running through the camera emulsion to emulsion, are used to record two regions of the color spectrum, for the purpose of ultimately printing the images, in complementary colors, superimposed on one strip of film. The result is a multicolored projection print that reproduces a useful but limited range of color by the subtractive color method. Bipack processes became commercially practical in the early 1910s when Kodak introduced duplitized film print stock, which facilitated making two-color prints.

Photographic film Film used by film (analog) cameras

Photographic film is a strip or sheet of transparent film base coated on one side with a gelatin emulsion containing microscopically small light-sensitive silver halide crystals. The sizes and other characteristics of the crystals determine the sensitivity, contrast, and resolution of the film.

Technicolor Color motion picture process

Technicolor is a series of color motion picture processes, the first version dating back to 1916, and followed by improved versions over several decades.

History of film technology

The history of film technology traces the development of techniques for the recording, construction and presentation of motion pictures. When the film medium came about in the 19th century, there already was a centuries old tradition of screening moving images through shadow play and the magic lantern that were very popular with audiences in many parts of the world. Especially the magic lantern influenced much of the projection technology, exhibition practices and cultural implementation of film. Between 1825 and 1840, the relevant technologies of stroboscopic animation, photography and stereoscopy were introduced. For much of the rest of the century, many engineers and inventors tried to combine all these new technologies and the much older technique of projection to create a complete illusion or a complete documentation of reality. Colour photography was usually included in these ambitions and the introduction of the phonograph in 1877 seemed to promise the addition of synchronized sound recordings. Between 1887 and 1894, the first successful short cinematographic presentations were established. The biggest popular breakthrough of the technology came in 1895 with the first projected movies that lasted longer than 10 seconds. During the first years after this breakthrough, most motion pictures lasted about 50 seconds, lacked synchronized sound and natural colour, and were mainly exhibited as novelty attractions. In the first decades of the 20th century, movies grew much longer and the medium quickly developed into one of the most important tools of communication and entertainment. The breakthrough of synchronized sound occurred at the end of the 1920s and that of full color motion picture film in the 1930s. By the start of the 21st century, physical film stock was being replaced with digital film technologies at both ends of the production chain by digital image sensors and projectors.

References

  1. 1 2 3 Cherchi Usai, Paolo (2000). Silent Cinema. British Film Institute. p. 35.
  2. 1 2 Nowotny, Robert Allen (January 1, 1983). The Way of All Flesh Tones: A History of Color Motion Picture Processes, 1895-1929. pp. 127–129. ISBN   9780824051099 . Retrieved May 29, 2015.
  3. ↑ "Patent 1,191,941 - Color Photography" (PDF). United States Patent Office. July 25, 1916. Retrieved May 29, 2015.
  4. ↑ "Patent 1,145,968 - Photographic Film" (PDF). United States Patent Office. July 13, 1915. Retrieved May 29, 2015.
  5. ↑ "Patent 1,410,884 - Differential Development of Color Cinematographic Films" (PDF). United States Patent Office. March 28, 1922. Retrieved May 29, 2015.
  6. ↑ "Patent 1,563,959 - Printing Color Cinematographic Films" (PDF). United States Patent Office. December 1, 1925. Retrieved May 29, 2015.
  7. ↑ "Patent 1,222,925 - Film For Color Cinematography" (PDF). United States Patent Office. April 17, 1917. Retrieved May 29, 2015.
  8. ↑ "Patent 1,359,025 - Apparatus For Color Cinematography" (PDF). United States Patent Office. November 16, 1920. Retrieved May 29, 2015.
  9. ↑ "Patent 1,359,024 - Method For Color Cinematography" (PDF). United States Patent Office. November 16, 1920. Retrieved May 29, 2015.
  10. ↑ "Patent 1,752,477 - Camera For Color Cinematography" (PDF). United States Patent Office. April 1, 1930. Retrieved May 29, 2015.
  11. ↑ "Patent 1,508,916 - Color Photography" (PDF). United States Patent Office. September 16, 1924. Retrieved May 29, 2015.
  12. ↑ "Patent 1,537,524 - Coloring or Dyeing Photographic Images" (PDF). United States Patent Office. May 12, 1925. Retrieved May 29, 2015.
  13. ↑ "New Color Photography Process Perfected; Two Young Inventors Make Pictures in Natural Hues and Take as Many Prints as They Desire from One Exposure". The New York Times . March 26, 1916. pp. 80, 81 . Retrieved April 29, 2022– via NewspaperArchive.
  14. ↑ "Patent 1,214,940 - Coloring or Dyeing Photographic Images" (PDF). United States Patent Office. February 6, 1917. Retrieved May 29, 2015.
  15. ↑ Friedman, Joseph Solomon (1944). History of Color Photography. American Photographic Publishing Co. p. 346. Retrieved May 29, 2015.
  16. ↑ Kroon, Richard W. (2010). A/V A to Z: An Encyclopedic Dictionary of Media, Entertainment, and Other Audiovisual Terms. McFarland. p. 46. ISBN   9780786444052.
  17. ↑ Robertson, Patrick (November 11, 2011). Robertson's Book of Firsts: Who Did What for the First Time. Bloomsbury Publishing. p. 326. ISBN   9781608197385 . Retrieved May 29, 2015.
  18. ↑ Crafton, Donald (December 15, 1993). Before Mickey: The Animated Film 1898-1928. University of Chicago Press. pp. 160–161. ISBN   0226116670 . Retrieved May 29, 2015.
  19. ↑ Krows, Arthur Edwin (April 1941). "Motion Pictures – Not For Theatres". The Educational Screen. p. 152. Retrieved May 29, 2015.
  20. ↑ "Erect First Studio Here To Make Tele Color Pix". Film Daily . April 10, 1944. Retrieved May 29, 2015.
  21. ↑ "Form Syndicate to Buy Color Process". Motion Picture Daily. April 7, 1944. Retrieved May 29, 2015.
  22. ↑ Segrave, Kerry (July 13, 2004). Product Placement in Hollywood Films: A History. McFarland. pp. 90–91. ISBN   0786419040 . Retrieved May 30, 2015.
  23. ↑ "Technicolor Sued Over Color Patent". Motion Picture Daily. April 2, 1941. Retrieved May 29, 2015.
  24. ↑ Federal Rules Decisions . Vol. 2. p. 186.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.