Burl's Aircraft

Last updated

Burl's Aircraft
Company type Privately held company
Industry Aerospace
Founded1982
Headquarters,
Products Aircraft parts
OwnerBurl A Rogers
Website www.burlac.com

Burl's Aircraft LLC is an American aircraft parts manufacturer located in Chugiak, Alaska. The company was founded in 1982 by Burl A Rogers, to design, engineer and manufacture Federal Aviation Administration approved parts for light aircraft. [1] [2]

Contents

History

Modernized Aeronca Sedan Aeronca15ACSedanC-GDBK.jpg
Modernized Aeronca Sedan

The company was established in February 1982 as Burl's Aircraft Rebuild and was granted FAA inspection authorization in 1985. [2]

The company's first product was the FAA approved Magnum I tailwheel penetration ski, made available in 1982. The eight different models of this product have sold 425 units in the past 25 years. [1] [2]

The Alpha Omega Suspension System was developed to a customer specification as a replacement for existing bungee landing gear shocks used on aircraft. The customer noted that the traditional shocks leak and wear out as well as provide too much bounce upon landing. Roger's design employs solid polymer as the shock-absorber, housed in a steel-plated cylinder that is sealed with epoxy and mounted with titanium tubes. [2]

Burl A Rogers purchased the Aircraft Type Certificate for the Aeronca Sedan in July 2000 from William Brad Mitchell and has since then manufactured parts for the design and issued Service Bulletins. The Sedan is known to the FAA as the Burl A. Rogers 15AC Sedan since the purchase of the type certificate, although no complete aircraft have yet been produced by the company. [2] [3] [4] [5]

Inventions

Related Research Articles

The Federal Aviation Regulations (FARs) are rules prescribed by the Federal Aviation Administration (FAA) governing all aviation activities in the United States. The FARs comprise Title 14 of the Code of Federal Regulations. A wide variety of activities are regulated, such as aircraft design and maintenance, typical airline flights, pilot training activities, hot-air ballooning, lighter-than-air aircraft, human-made structure heights, obstruction lighting and marking, model rocket launches, commercial space operations, model aircraft operations, Unmanned Aircraft Systems (UAS) and kite flying. The rules are designed to promote safe aviation, protecting pilots, flight attendants, passengers and the general public from unnecessary risk.

<span class="mw-page-title-main">McDonnell Douglas MD-80</span> Jet airliner model, series based on the DC-9

The McDonnell Douglas MD-80 is a series of five-abreast single-aisle airliners developed by McDonnell Douglas. It was produced by the developer company until August 1997 and then by Boeing Commercial Airplanes. The MD-80 was the second generation of the DC-9 family, originally designated as the DC-9-80 and later stylized as the DC-9 Super 80 . Stretched, enlarged wing and powered by higher bypass Pratt & Whitney JT8D-200 engines, the aircraft program was launched in October 1977. The MD-80 made its first flight on October 18, 1979, and was certified on August 25, 1980. The first airliner was delivered to launch customer Swissair on September 13, 1980, which introduced it into service on October 10, 1980.

<span class="mw-page-title-main">ERCO Ercoupe</span> American light aircraft

The ERCO Ercoupe is an American low-wing monoplane aircraft that was first flown in 1937. It was originally manufactured by the Engineering and Research Corporation (ERCO) shortly before World War II; several other manufacturers continued its production after the war. The final model, the Mooney M-10, first flew in 1968 and the last model year was 1970. It was designed to be the safest fixed-wing aircraft that aerospace engineering could provide at the time, and the type continues to enjoy a faithful following.

<span class="mw-page-title-main">Homebuilt aircraft</span> Aircraft constructed by amateurs

Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.

<span class="mw-page-title-main">Eclipse 500</span> Very light business jet

The Eclipse 500 is a very light jet (VLJ) originally produced by Eclipse Aviation of Albuquerque, New Mexico, United States. The company was founded in 1998 to develop the 1997 Williams V-Jet II demonstrator. The prototype first flew with Williams EJ22 turbofans on August 26, 2002. The engines were replaced by Pratt & Whitney Canada PW610Fs in 2004 and Eclipse Aviation won the Collier Trophy in February 2006 for the design. A provisional FAA type certification was received on 27 July 2006 and the first delivery occurred on 31 December 2006.

<span class="mw-page-title-main">Buffalo Airways</span> Airline based in Yellowknife, Northwest Territories, Canada

Buffalo Airways is a family-run airline based in Yellowknife, Northwest Territories, Canada, established in 1970. Buffalo Airways was launched by Bob Gauchie and later sold to one of his pilots, Joe McBryan. It operates charter passenger, charter cargo, firefighting, and fuel services, and formerly operated scheduled passenger service. Its main base is at Yellowknife Airport. It has two other bases at Hay River/Merlyn Carter Airport and Red Deer Regional Airport. The Red Deer base is the main storage and maintenance facility. The airline is also the subject of the History television reality series Ice Pilots NWT.

<span class="mw-page-title-main">Honda HA-420 HondaJet</span> Very light business jet

The Honda HA-420 HondaJet is a light business jet produced by the Honda Aircraft Company of Greensboro, North Carolina, United States. Original concepts of the aircraft started in 1997 and were completed in 1999. It took its maiden flight on December 3, 2003, received its FAA type certificate in December 2015, and was first delivered that same month. By the end of 2021, 200 jets had been delivered.

<span class="mw-page-title-main">Aeronca 11 Chief</span> Type of aircraft

The Aeronca Chief is a single-engine, light aircraft with fixed conventional landing gear and two seats in side-by-side configuration, which entered production in the United States in 1945.

<span class="mw-page-title-main">Aeronca Sedan</span> Type of aircraft

The Aeronca 15AC Sedan is a four-seat, fixed conventional gear light airplane which was produced by Aeronca Aircraft between 1948 and 1951. Designed for personal use, the Sedan also found applications in utility roles including bush flying. The Sedan was the last design that Aeronca put into production and was the largest aircraft produced by the company.

<span class="mw-page-title-main">Airworthiness</span> Measure of an aircrafts suitability for safe flight

In aviation, airworthiness is the measure of an aircraft's suitability for safe flight. Initial airworthiness is demonstrated by a certificate of airworthiness issued by the civil aviation authority in the state in which the aircraft is registered, and continuing airworthiness is achieved by performing the required maintenance actions.

<span class="mw-page-title-main">Aeronca C-3</span> Type of aircraft

The Aeronca C-3 was a light plane built by the Aeronautical Corporation of America in the United States during the 1930s.

<span class="mw-page-title-main">Aeronca K</span> Type of aircraft

The Aeronca Model K Scout is an American light airplane first marketed in 1937, and was the true successor to the popular C-2/C-3 line.

<span class="mw-page-title-main">Aeronca Champion</span> American single-engine light plane

The Aeronca Model 7 Champion, commonly known as the "Champ", or "Airknocker", is a single-engine light airplane with a high wing, generally configured with fixed conventional landing gear and tandem seating for two occupants.

<span class="mw-page-title-main">Historic Aircraft Restoration Museum</span> Aviation museum in Maryland Heights, Missouri

The Historic Aircraft Restoration Museum, located at Creve Coeur Airport in Maryland Heights, Missouri, United States, is dedicated to restoring and preserving historical aircraft. The airplanes in the collection are all fabric-covered, and most are biplanes from the inter-war years. The museum's volunteers maintain most of these aircraft in full working order. This is one of the largest collections of flying classic aircraft in America.

<span class="mw-page-title-main">Boeing 737 Next Generation</span> Single-aisle airliner family by Boeing

The Boeing 737 Next Generation, commonly abbreviated as 737NG, or 737 Next Gen, is a twin-engine narrow-body aircraft produced by Boeing Commercial Airplanes. Launched in 1993 as the third generation derivative of the Boeing 737, it has been produced since 1997.

The Welch OW-5M were a family of American two-seat light cabin monoplanes designed by Orin Welch based on his first cabin monoplane design, the ACA Falcon. Welch's goal was to design cheap and functional light aircraft. The aircraft is a strut-braced high-wing monoplane with an enclosed cabin with side-by-side seats for two. It is similar in appearance to the Aeronca C-3, save for the wing struts. It had a steerable tailwheel landing gear and a nose-mounted engine. The fuselage was constructed with fabric covered welded steel tubing with a triangular cross section. The controls were mounted overhead with an adjustable control wheel that could be positioned for either pilot. Welch developed their own low-pressure wheels and tires for suspension.

<span class="mw-page-title-main">ICON A5</span> Amphibious light-sport aircraft developed by ICON Aircraft

The ICON A5 is an American amphibious light-sport aircraft (LSA) designed and produced by ICON Aircraft. A concept aircraft was first flown in 2008, and creation of the production tooling began in December 2012. The first production aircraft made its first flight on July 7, 2014, and made its public debut at EAA AirVenture Oshkosh on July 27, 2014. A year later at AirVenture, it was temporarily donated to the youth group Young Eagles, with the first official A5 customer deliveries occurring in 2016. As of 2019, 100 A5s had been delivered. The aircraft is known for having brought significant excitement and publicity to the LSA industry since its unveiling in 2008, although company legal and financial issues have slowed production since 2016.

Everts Air is an American airline based in Fairbanks, Alaska, United States. It operates scheduled and charter airline cargo as well as passenger services within Alaska and Canada. Its main base is Fairbanks International Airport with its major hub at Ted Stevens Anchorage International Airport. The company slogan is Legendary Aircraft. Extraordinary Service.

<span class="mw-page-title-main">Boeing 737 MAX</span> Single-aisle airliner family by Boeing

The Boeing 737 MAX is the fourth generation of the Boeing 737, a narrow-body airliner manufactured by Boeing Commercial Airplanes, a division of American company Boeing. It succeeds the Boeing 737 Next Generation (NG) and competes with the Airbus A320neo family. The new series was announced in August 2011. It took its maiden flight in January 2016 and was certified by the US Federal Aviation Administration (FAA) in March 2017. The first delivery was a MAX 8 in May 2017 to Malindo Air, with which it commenced service in May 2017.

The Aeronca Museum is an online museum that hosts a collection of artifacts and aircraft produced by Aeronca, a prominent U.S. light aircraft manufacturer from 1928 to 1951. The museum is instituted to "preserve the knowledge and history of Aeronca aircraft in the public trust" and keep it "available for future generations," with the objective "to be the premier research library for all things Aeronca."

References

  1. 1 2 Burl's Aircraft (n.d.). "Burl's Aircraft Rebuild" . Retrieved January 9, 2008.
  2. 1 2 3 4 5 Campbell, Melissa (August 30, 2004). "Friend's problem spurs Rogers' invention". Alaska Journal of Commerce . Retrieved September 1, 2012.
  3. FAA Type Certificate A-802
  4. "EAA News - AD Issued for Aeronca (Rogers) Sedan Wing Inspection". Eaa.org. Archived from the original on March 20, 2012. Retrieved September 1, 2012.
  5. Federal Aviation Administration (September 1, 2012). "Make / Model Inquiry Results" . Retrieved September 1, 2012.
  6. "Inventor finds a better way to land a Super cub airplane on difficult terrain" [ permanent dead link ] July 10, 2005